Which way for 7x5 paper in D7160?

I'm trying to print a landscape format photo onto 7x5 paper in my Photosmart D7160 using Photoshop Elements 6.
I've tried putting the paper in the Main tray in both landscape and portrait positions, aliginging it to the right-hand side (as you look at the printer from the front).
But all I get is half the image.
How do I align the paper properly and what settings do I use to get the full print.
Thanks in advance.

You should load the paper in portrait mode, long side against the right hand edge of the paper guide. In Elements when you select Print you need to set the paper size to 7 x 5 and then go into the printer preferences ( I don't have Elements 6 but I have 8) In Elements 8 this is found by selecting Change Settings and then Advanced Settings. This takes you to the HP printer preference page. Select the Color tab on this page and then select Show Preview before printing. The OK back out to the Elements print page and select Print. It takes a while but you will then get a HP preview page which shows you how the page will look when printed. Your landscape image should be on its side. If it is select the Print option, otherwise select the Cancel.
If you have had to cancel then repeat the above until you come to the HP printer preferences (via Change Settings, Advanced Setting) and select the Printing Shortcuts tab. On this page select the paper size again, Color Management - set to Adobe RGB and Orientation - set to Landscape then go t the Color tab again and make sure the Show Preview is checked.
Your print should now appear the right way up.
Good luck
Fred

Similar Messages

Case, cover, or bare- which way for the iPad Air?

Love the iPad Air-- light, fast, elegant, and fun!
Like the look of it, though I am concerned about the smooth back and the possibility of a drop; and the exposed front and back potentially leading to scratches by setting it down!
So, tried a wonderful, light, inexpensive, well constructed case by Fintie (have one on my iPad Mini and it works great!). The iPad Air version is only slightly over 7 ounces, but with the Air in it, the Air no longer seems so light, airy, and appealing!
I'm thinking that I need a combination of a light "smart cover" with a thin clear, see-through vinyl, scratch-protecting sheet for the back. That way, the Air'll have some protection from scratches and screen damage, but it could also leave its "docking" station (i.e., take off the cover).
Any recommendations for such combos? Do they even exist?

Well, I may have found one... there was a sizing problem, but it seems they've fixed that. Anyone here tried it?
3.
buy new:$29.95 $1.95
Skinomi TechSkin - Apple iPad Air Wi-Fi + LTE (5th Generation) Screen Protector Ultra Clear Shield + Full Body Protective Skin + Lifetime Warranty

Which way for 3G access?

Hi,
Has anyone tried 'tethering' a MBA with the iPhone 4? Does it work well?
How does tethering compare with a USB 3G modem?
Our cable modem goes down whenever the weather gets wet...
Thanks for any insights.
Jerry

Oh I'm using the Tethering Option of my Iphone 4 every day. IT's fantastic and so easy to use. On your IPhone the tethering option can remain enabled everytime as it won't use battery power while not connected. That makes it extrem easy when connecting to the Mac.
If doing so, you just have to click on the bluetooth symbol at the top of the screen, move to Iphone4 and connect to network.
Thats all and you will be connected to the internet. On the IPhone will appear "Internet Tethering" in blue letters, but you can use it as usual in this time as well.
For disconnect just click on bluetooth, Iphone, disconnect and and the blue letters on the IPhone will disappear.

Why do I not have access to all the features of my Canon MG5320 printer in all applications which use a printer? The printer has two paper paths. The rear path is used for photo paper and other specialty papers. this is only one "unavailable".

I have an iMac late 2012 with OSX 10.8.
The MG5320 has two paper feed paths; one at the rear for photo paper, brochure paper, and other specialty papers and a tray for regular 8½x11 paper. It also can print on CDs and DVDs and has an automatic duplexer. Canon provides a utility for printing on the CDs and DVDs and also for printing photos and other specialty items. This is available in Mac format also. I installed the most recent drivers and utilities.
I also have a HP IBM Compatible computer on which the above printer as well as an Epson are installed. Every option of each printer is available in every software application that has need for a printer.
The Mac printer dialog varies from one application to another. The only applications that list the option for selecting paper quality which includes photo paper are Office for Mac, Pages, and Numbers. Not likely that I would be using any of these for photo printing. Auto duplexing, however, is not available here or in any other applications.
The print dialog in Aperture, Photoshop Elements for Mac, ACDSee for Mac, or iPhoto provide the choice of numerous sizes of paper but no option for paper quality. Therefore, I attempted to use the print utility supplied by Canon and updated by Apple for printing some photos. The photos are selected in this utility. When the print command was given I was shown a message that the printer was being reset. It then began printing a spreadsheet, which was not even open, from the front tray on regular paper in fast draft quality.
It is essential that the rear feed be available for printing photos. The printer will not accept photo paper from the front tray. The greater proportion of my printing is photos or other specialty items all of which use paper that must be fed from the rear feed.
An acquaintence who considers himself to be somewhat of a Mac expert insists that the printer options that I require are available and all I need to do is look for them. The print dialog should be clear enough that "looking for options" is not a necessity. Even so, I have dilligently searched every variation of the Mac print dialog on my iMac and only the office type applications named above included anything other than the basic printer functions.
I have also searched numerous locations online without finding a solution. I did, however, find that printing and printing problems seem to be common with several versions of the Mac OS and Mac computers in general.
I would appreciate it if someone could provide me with a solution. I have no desire to upgrade my Windows OS to Windows 8 which is perhaps suitable for "smart" phones but not desktop computers. However, because of the printing issue I have temporarily put my iMac aside and reverted to using my PC with Windows Vista.
Help!!

This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.

I have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

Try this:
Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased.

Not sure which way to go for transfer.....

First; let me say that I did search for the answer to this, but I'm not sure which way to go with a lot of the answers. I'm sorry I'm asking this question for the umpteenth time. Yes; I'm one of those that understands enough about computers to make me dangerous...
Our computers are set up on a home network. Before I got my iPod last year, we ripped all our CDs and saved them on a completely separate external drive named "M" (for music), so all 3 computers could have access to the information on the M drive.
I get my pod & have the office computer set up to be the 'main' iTunes location, since we purchased a USB2 hub for it. I quickly learned how to direct iTunes to 'pull' the music from the M file & understand how all that works. Life is good. I even took the time to put an album art file on the M drive & insterted everything into iTunes by 'hand'.
Bless my hubby's heart. Completely filled with computer envy, he just purchased me a brand spanking new shiney computer. Needless to say, with all these new bells and whistles, I can now use my computer as the 'home base' for all things iPod/iTunes instead of having to go downstairs to do updates, etc.
I looked up & printed out "How to use your iPod to move your music to a new computer" from the Apple web site, which basically says to download everything onto my iPod's harddrive & do the transfer on the new machine.
I think what I'm trying to ask, is since all the music is located on an external drive:
When I download iTunes to iPod harddrive, are all the tags still in place? Will all the album art be correct, so when I download it onto the new computer, everything will be identical to what's on the old computer?
--or--
Is there another trick I can do to have everthing the same on the new computer?
--or--
Am I better off just having my computer go to the M drive & upload all the music onto my new computer & reload all the album art by hand again?
My real hesitation on this method is I have a lot of things on the M drive that I changed the tags on in iTunes, & I would really hate to go & search through everything again & redo what tags I can find wrong.
I know that this may sound like a lot of trivial questions, but with over 6,000 tracks, I'd really like the process to go as smoothly as possible.
And once again; I'm sorry if this seems like just another 'how do I transfer' question. As I was reading the search results, I didn't notice anything that dealt with external drives being involved & I don't know if any of that makes a differance or not in all of this.
Thank you SO MUCH for your time!!
Dell Inspiron E1705 Windows XP First Time Mommy to 4gen 60gb photo
Dell Inspiron E1705 Windows XP First Time Mommy to 4gen 60gb photo

Sandeep,
I have already answered a similar question from you earlier.
Re: Netweaver after one and half year of ABAP experience...
Please do not create duplicate threads.
Regards,
Siddhesh

WHat is the best way for other iphone users to share pictures with me? I am doing a project which req. people to send me 100 pictures at a time that I'll be putting in my iphoto?

WHat is the best way for other iphone users to share pictures with me? I am doing a project which req. people to send me 100 pictures at a time that I'll be putting in my iphoto? thank you.

ingridlisa,
I'd suggest to ask them to create Shared PhotoStreams and to invite you to view the streams, see:
iCloud: Using and troubleshooting Shared Photo Streams
Regards
Léonie
Added:
that I'll be putting in my iphoto?
Will you be collecting the photos in iPhoto on your iPhone or on a Mac? On a Mac a Shared PhotoStream requires Mac OS X 10.8.2.

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!

You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
There is some info on these pages :
developer site : https://developer.apple.com
developing for iOS 7 : https://developer.apple.com/ios7/
developer support : https://developer.apple.com/support/
developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them)

What's the best way for me you display my ipad on to my laptop which will then be on a projector

What is the bext way for me to mirror my iPad to my Windows 8 laptop? I installed Reflector mirroring software which works fine from home as my Network is compatible with the Reflector software, however, when I try and use/display via other places, it doesn't work. Aparently this is due to some networks not having the capabilities.
Any suggestions please?

When networks can't support the refloctor application here are other choices
a) Use an Elmo Document camera for hardware, and use the Elmo software called imageMate to show the ipad screen on the screen of your laptop/desktop. It works better than Reflector, because you also get the fingers of the ipad operator. If you are training people how to use an ipad app, the finger gestures are essential, and left out of the reflector Application
b) Try this guide ( 5 ways to show ipad on a projector )
http://learninginhand.com/blog/5-ways-to-show-your-ipad-on-a-projector-screen.ht ml

Which is the best way for posting a large number of records?

I have around 12000 register to commit to dababase.
Which is the best way for doing it?
What depends on ?
Nowadays I can't commit such a large number of register..The dabatase seems hanged!!!
Thanks in advance

Xavi wrote:
Nowadays I can't commit such a large number of registerIt should be possible to insert tens of thousands of rows in a few seconds using an insert statement even with a complex query such as the all_objects view, and commit at the end.
SQL> create table t as select * from all_objects where 0 = 1;
Table created.
Elapsed: 00:00:00.03
SQL> insert into t select * from all_objects;
32151 rows created.
Elapsed: 00:00:09.01
SQL> commit;
Commit complete.
Elapsed: 00:00:00.00
I meant RECORDS instead of REGISTERS.Maybe that is where you are going wrong, records are for putting on turntables.

Which way of VS 2008 do you use for connecting WebServices in WebAS 7.0?

Since a couple of days I do have problems connecting WebAS 7.0 post SPS 14 (SOAMANAGER) WebServices: Client in C#, Service on WebAS
Which way in generating the Proxies are you using in VS 2008?
a) ServiceReference as in .Net 3.5
b) WebReference as in .Net 2.x
c) SAP Enterprise service with ESR
I have tried a/b and constantly fail with message errors as "Unrecognized message version."
Important: I do ask about WebAs 7.x SPS 14 or later - the version with SOAMANAGER - my old WebServices before the changes in SPS 14 did work.
Regards HT

Jordan Miller wrote:
I believe you are mistaken. It has been well documented before me here:
http://pogue.blogs.nytimes.com/2008/01/09/the-vanishing-numeric-keypad/
I certainly wouldn't call a blog "well documented".
But let's address it. He says the embedded number pad is gone. It is. That's all he says.
You, on the other tentacle, complain that fn-left/right/up/down aren't there any more. You also claim that things have been missing "for some time".
I have a Macbook (2006) and a MBP (June 2007) sitting here with all the logos on the keys. Not missing here. I have a new MBP (October 2008) also sitting here, no logos on the keys.
Let's see...
Fn-down... yeah, certainly seems to do page down
Fn-up... yeah, certainly seems to do page up
Fn-right... yeah, certainly seems to go to the end of a line
Fn-left... yeah, certainly seems to go to the beginning of a line
So, what, exactly was the problem? Aside from you not actually testing anything?
and yes, I DID try again just now and proved that it has been removed from the hardware by looking at the keyboard viewer while holding down the function key.
I have no idea what hardware you're looking at... works fine here. You didn't actually test to see what happens when you hit the key, then?
Does anyone have a solution to this problem?
That would be the problem that doesn't exist, right?
Oh, here's the image you wanted: http://members.cox.net/msw/KeyboardViewer.png

I'm from maldives, which is the possible way for me to buy the lightroom licence?

I'm from maldives, which is the possible way for me to buy the lightroom licence?

Adobe Resellers http://adobedealreg.force.com/PartnerSearch?lang=en

Which is the best way for a called function to identify caller class name.

Which is the best way for a called function to identify the caller class name .
1)Using sun.reflect.Reflection from called function
                Class caller = Reflection.getCallerClass(2);
                System.out.println("Caller Class Name ::"+caller.getName());2) Analyzing current threads stack trace from called function
                StackTraceElement[] stElements=Thread.currentThread().getStackTrace();
                System.out.println("Caller Class Name ::"+stElements[3].getClassName());Is there any alternate ways to achieve the same .Which is the best way ?
Called function doesn’t have any arguments, I don’t want t pass any arguments from caller function to called function.
Plz help.
With kind regards
Paul

798185 wrote:
Which is the best way for a called function to identify the caller class name .
Is there any alternate ways to achieve the same.SecurityManager
    // 0 is the anonymous SecurityManager class
    // 1 is this class (also works in static context)
    // 2 is calling class
    static Class getClass(int i) {
        return new SecurityManager() {
            protected Class[] getClassContext() {
                return super.getClassContext();
        }.getClassContext();

Is there a way for apple to track down which apple id is currently associated to a device?

Hi! My iphone 4s was pick pocketed from me last night. I have FindMyIPhone installed on that device but unfortunately i forgot to turn on my location settings so i wasn't able to track down the culprit via GPS. I already contacted my provider to see if there's anything they could do about it, but i was informed they could only temporarily disconnect my service. I'm planning to have my phone blocked using its IMEI so that the thief could no longer use the phone and would otherwise be forced to have it fixed in istore or something. But my experiences here in our country (PHILIPPINES) makes me think i shouldn't be relying on the officials. Every year, the cases of stolen phones just rise up. And not anyone from the government is even doing a thing about this criminals.
Anyway, going back to my main concern, my phone has a passcode on it. But i am aware that anyone could just restore the phone and it'll be good as new. Chances are, the person who has it could register a new apple id and associate it with my phone's serial #. So my question is, is there a way for apple to see the new apple id associated to my phone using just the serial or IMEI? If so, will they allow me to get the new apple id associated to my phone? That way, i could coordinate with our local police here in PI and track down that person who has my phone.
Please help, i haven't slept really well since that incident happened. I know this might sound overrated. But i feel like i'm really desperate. I've only use that phone for 2months. And having to think of buying a new phone that costs a lot is just..... you get the picture. Help

Apple can do nothing at all.
Sorry.

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same fam

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same family.

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

Which way for 7x5 paper in D7160?

Similar Messages

Maybe you are looking for