Which webpage size is the "most normal" to use?

Hey everyone out there.
I'm creating a webpage in Muse. In the Plan-part of the program the page is shown just as I want it, but when I upload it on my browser it looks all wrong.
It's like my page is too small for the browser, because big white gaps are shown in both the left and the right side. Besides, when I make my browser widescreen, there is also a gap between the footer and the bottom of the browser.
Anyone out there who know what to do? Or if there is a size for the webpage which is best to use, so it is shown normally in the browser?
My webpage currently has the size W:1220px H:768px

Hi,
Can you please share the Url of your website so that we can have a look and see what is the issue that you are facing.
And regarding the size of the webpage , please refer to this link :- http://helpx.adobe.com/muse/topics/page-layout.html
Hope this helps
Regards,
Rohit Nair

Similar Messages

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it a

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it actually says not moblie network available, when everyone else in my family has coverage and are on my plan with iphones. I am missing text messages and dropping calls left and right. This is unacceptable for the cost of this phone and my service. I have did a hard reset etc. What else can I do??

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Which exercise learnd you the most?

Hi,
I would like to know good exercises to improve my programming. I'm a beginnier and the most advanced program I made is a pokergame where the user interact through command line, that means no Swing classes. I also know algorithms like recursion, polymorphism, inheritance and so on..
Now hit me, what should be my next project? I would like to learn DB-modeling, I know nothing about that. I also want to learn more about I/O-streams in Java, for example, how you read data from the webb in to an application?
But these are just topic-suggestions from me, if you have other exercises that you think is good I take them too..
PS. I know google can help for exercises, but I want to know which one learnd YOU the most.
Edited by: Ani_Skywalker on Jun 27, 2008 4:31 AM

DrLaszloJamf wrote:
My advice is not to rush into Swing or JSP/servlets. Learn more Java first. You mentioned I/O. What about the collections framework? XML processing? JDBC? Some frameworks the Hibernate and Spring? Design Patterns?Collection framework. No.
XML. No.
JDBC. Began to look at it this morning, after I opened this thread.
Frameworks. Some Swing but I would say no.
Design Patterns. Come cross this before, but no. I can't say that I know it...
I'm gonna stick whit command line for the moment. I don't get to excited about GUI:s because I can put almost everything that I can code into a GUI, and the other way around. Therefore I think, just like some of you wrote, that I need to improve my Java. When I reach a level were I can't put my code in GUI:s, then I probably get excited about it...

But i'm worried about the audio quality which matters to me the most !! is the audio quality on iPod with ear-pods the same as iPad with earpods ?

hi guys !! i'm an ipod touch 5g user ! and i want to switch to ipad !! but i'm worried about the audio quality which matters to me the most !! is the audio quality on iPod with ear-pods the same as iPad with earpods ?

thnx i'm more satisfied now !

Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus

Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus.

In short, no. There is no fix yet. They only barely acknowledge there is a problem. The "fix" is to enable 200% UI scaling which makes everything comically huge and unusable. This is pretty much of a joke. A really, really EXPENSIVE joke.

Is there a way to increase the icon size (and the text below) without using zoom? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Is there a way to increase the icon size (and the text below) without using zoom in iOS 7? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Hello Apple.
It seems you have gone to great lengths to improve accessibility in many areas of the iPad. Why was this obvious problem with icon text size missed? (It's not with the Mac.). And for so long too.
Do you employ people with actual accessibility problems to help you do UI design?
I think too, that some buttons are too close for people who might have motor control problems.
I love my iPad but I fear as I age, the iPad might not keep up with me.

My tabs are listing webpage sizes not the names of webpages. How do I fix?

I am attempting to teach myself drupal. In the course of working on making a web page, I did something that changed the tab configuration. A blank page now has the size of the webpage in the tab instead of it being blank. Any ideas on how to change back?

Get Info (cmd-i) on one of these files. In the "Open with" tab is PS selected?
If that's so it may be some corruption LaunchServices.These are only cache files but can get corrupted.
Launch /Utilities/Terminal and copy & paste this at the command line to rebuild LaunchServices:
(EDIT: Be sure to copy the entire line of code it is a slider)
Code:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
Then press return. Wait until terminal returns to the command line. Quit Terminal. After that, log out and back in or restart. Let us know

HT1444 Upgrading from 10.5.8 to 10.6 (or later) which later version makes the most sense?

For work-related remote-access using Citrix, I will need to upgrade from V10.5.8 to V10.6 (or a later version). Which new version would make the most sense?

Since it's a 10.5 era issued machine and rather dated, the best OS X version is 10.6.3 via the white retail disks, call Apple Sales by phone and order it for $29.
10.6 will run your presently installed 10.5 software as 10.7 or 10.8 will not. Also 10.7 or 10.8 will slow your machine down to a crawl, so it doesn't make much sense to go there.
Since your machine is getting long in the tooth, it's got not that much longer to go, I would be considering a newer 10.8 or 10.9 machine (next summer) and ease yourself into in.
So 10.6 now, 10.8 or 10.9 on a new machine later.
Don't upgrade to 10.8 and don't worry about it, over 50% of OS X users are on 10.6 currently, (30% on 10.7) and about 5% on 10.8 just released.
Things to consider before upgrading OS X
Back up only your personal info off the machine to a external storage drive (not TimeMachine!), disconnet it. Stick the 10.6.3 disk in and run the updater.
Most commonly used backup methods
If you need to wipe and install, (like if you have problems because your 10.5 is funkyed up)
How to erase and install Snow Leopard 10.6
Install your programs from fresh original sources and last hook up your storage drive and return files into same named accounts.

Brush cursor does not match the size of the brush I am using

Recently the brush cursor changed so that it is much larger than the actual brush that is applied to a background or photo. I can't tell where or how big the brush is going to apply. I have reset the brush tool and checked the brush tool options. All are set at zero except the brush spacing which is at 25%. It always sits at 25% spacing. I recently started using a magic mouse on my iMac instead of a regular pc mouse. I am using the brush tool on Photoshop Elements 10 and Photoshop CS4. Is this a mouse problem?

Which version of mac os x are you using?
See if going to System Preferences>Accessibility>Display and the setting the Cursor Size to Normal resolves the issue.
or
System Preferences>Universal Access>Mouse

Controlling the size of the popup window when using target

Using the anchor tag and the target attribute (<a
target="_blank"...>), how does one control the size of the new
window? Or is this not possible? Thanks!

use javascript. if you want to put it in <a> tag, then
you can do it this way:
assuming your page is index.cfm, then:
<a href="index.cfm" target="_blank"
onclick="window.open('complete
URL','name_of_window_to_open','width=100,height=50')">test
link</a>
OR use other tags such as
<span style="cursor:pointer"
onclick="window.open('complete
URL','name_of_window_to_open','width=100,height=50')">test
link</span >
If not familiar yet with window.open, go to this link for
reference:
http://msdn2.microsoft.com/en-us/library/ms536651.aspx

How to find out which session is consuming the most of sga

Hello,
I have a server that is running out of swap space. I like to find out which oracle session is using a lot of the sga. Which data dictionary has this view? Thank you. 9208, linux 4.

How did you configure SGA memory managment?
How much real memory is available on the machine?
How large did you make the SGA?
How much PGA do you think you need?
See Oracle version# Reference manual and start with
v$process -- show pga per process and can be joined to v$session to identify front-end process
v$pgastat
v$sga
v$sgastat
HTH -- Mark D Powell --

In the former version of iTunes there was an option by means of which I could see the most recent podcast even for those I did not subscribe to. Apparently, with 11.2 this option is gone. Any help?

Hi folks,
in former versions of iTunes I could update the list of available podcasts even for those I did not subscribe to.
Where is this feature in iTunes 11.2?
Help is appreciated!
Regards
Klaus

well nobody bothered to give me a hint on what to do, maybe because the problems with the new version of iTunes are really a lot, there is an enormous amount of people out there that have all sort of different problems including mine so I have decided to return to the previous version which works fine and wait untill the apple people come up with a decent product ....

HR Schema: Select salary which is earned by the most employees+how often

hi all,
select * from (
SELECT salary, COUNT(salary)
FROM employees
group by salary order by 2 desc) where rownum < 2;
SALARY | COUNT(SALARY)
2500 | 6
Is there another solution for this result (without rownum)?
thanks

user13428495 wrote:
thanks a lotYour solution was way better then all others posted so far. Why? Because you only scanned the employees table one time. All others needed to scan this table two times. Therefore your query will probably execute faster if the data will become more. For small data sets you will not notice any difference.
Other solutions that will only scan the table one time can be using the KEEP syntax or an analytic function.
untested
/* aggregate version */
select max(count_sal), max(salary) keep (dense_rank first order by count_emps desc)
from (SELECT salary, COUNT(*) as count_emps
        FROM employees
       group by salary )
/* maybe the double group works directly without extra select */
select max(COUNT(*)) cnt, max(salary) keep (dense_rank first order by COUNT(*) desc) salary
FROM employees
group by salary;
/* analytic version with a different output*/
select v2.* from (
   select v1.*, rank() over (order by count_emps desc)
   from (
      SELECT e.*, count(*) over (partition by e.salary) count_emps rn
      FROM employees e) v1
   order by count_emps desc) v2
where v2.rn = 1Edited by: Sven W. on Sep 8, 2011 1:53 PM typo correction: dense_rank

How to know the size of the string with out using the length() method

i want to find the lenght of the
String s="Sudha";
with out using the lenght() method.

Not true (I mean the part about "The only String
call"). But if it had been true, I might haveagreed
with this:
Assuming one uses the 'exception' approach thenwhat
method other than charAt() is needed?I probably misunderstood your post, I thought you
meant that the only alternative to length() would be
charAt() and catching the exception.There are many ways and if the teacher had said find 5 ways of finding the length of a String then I would have fealt happier because it would have meant the student would have to read and study the whole of the String API.
I like
int length = (s+"sabre").lastIndexOf("sabre");

Which service provider in the uk can you use coldfusion on

Hi,
I am starting to use coldfusion and i have been told no all
service providers can use coldfusion
can anybody tell me what one in the uk can?
Cheers
Paul

Hi John,
Thanks for taking the time to help me. I am in the middle of
making a site www.leahstoys.co.uk
and i want it to have a search engine and be a dynamic site
so im learning coldfusion.
I am currantly with sky broadband for my internet provider
but ive be told i cant have a site using
coldfusion with sky i am very new to this any advise you can
give would be great.
Thanks again
Paul

Which webpage size is the "most normal" to use?

Similar Messages

Maybe you are looking for