Which will load first?

I currently have an SATA 7200rpm hard drive in my setup. I'd like to add in an older non-SATA (p-ata?) 5200rpm hard drive from my old computer. I have the OS installed on the SATA drive. Which drive will my system boot from? The quicker one?

Advanced bios
Hard Disk Boot order
you should see both your drives there. move your sata to the top. using pageup/pagedown keys
save & exit
sorted
until you
reflash bios
reset cmos
Then you'll have to repeat above.

Similar Messages

Which will execute first in File Adapter (parameter,Identifier,module)

Hi,
I have written a module for my sender file adapter, and choose FCC to parase my complex structure...here my doubt is whether adapter module will call first or FCC which is there in Identifier tab in file adapter?
Regards,
Irshad.

Chandras sekhar,
i have already seen that blog...
could you plz read my message once again?
Regards,
Mansoor
ya i got it..Call sap adapter module will store the message in send queue.
just want to know which module is building the xi header whether it is same call sap adapter module or is there any specific module which will convert native message to xi message.
Is call sap adapter module is the responsible for building the xi message header with the help of cpa lookup? if its so again confuse for me.....
In File adapter we have 3 tabs one is parameter identifier and module...As u said first parameter tab will run as per FCC/ File message protocol then this parsed/content of text file will be input to the module tab .in this module tab we have custom modules and standard module these modules are executed in the same sequence as mentioned.
what is the module name which converts native message to xi message?
Regards,
Mansoor

Which will execute first

Hai,
I am having Where class and having class in a single select query.. Which will execute at first.

user12283394 wrote:
Hai,
I am having Where class and having class in a single select query.. Which will execute at first.select deptno, min(SAL), max(SAL) FROM EMP WHERE job='CLERK' group by deptno having count(*) > 3;
You should read basic sql query comment..
Refer :-
http://dbis.ucdavis.edu/courses/sqltutorial/tutorial.pdf
Regards
Azar
DBA

Multiple subforms, only 1 of which will load when the PDF is opened.

I am new to LIvecycle Designer, and have had no problems so far that I could not resolve via Google or trial and error. Now I have an issue for which I cannot find an answer.
I have created a fillable form, 2 pages, that will handle input of various numeric values. In an effort to keep the size down, on each page I have a subform that will hold some of the calculations, with the total captured on the main page. That portion works fine--capturing the calculations from the subforms on the main page. The problem comes in opening the subforms. I created a button for each subform, that when clicked will make the subform visible. Each subform has a close button to make invisible. By default each subfom is set as hidden. The problem is, when I open the file, I can only open one subform. If I open then close the subform on the first page then I cannot open the subform on the second page (I can click the button but nothing happens). If I reopen the file, and open and close the subform on the second page, then I cannot open the subform on the first page. It seems there is some conflict in the background that causes the first form opened to "deactivate" the second form, for lack of a better term. I used the action builder to handle the open and close operations.
I receive no error message, and there is no conflict in names between subforms or buttons. I even tried a test form with 3 subforms to see if maybe I messed up in my first form, but I am seeing the same result.
Any ideas?

Hi,
Are all your subforms flowed layout, including the top one and do they allow page break within content?
If you can add a link to you form (maybe google docs or similar) then we can have a look.
Regards
Bruce

Which will take first tor or availability chek

hai friends
can any one clear my doubt whether the tor is thaking forst or availability check is taking first
thanks

Hello,
Availability check is considered as a pre-sale activity where as TOR is considered as a post-sale activity.
As soon as you enter a material in a sales order.........the system checks the availability of the stocks depending on the requested delivery date mentioned in the order.
Then it does the backward or forward scheduling depending on the availability of the stocks.
Once the stocks and delivery dates are confirmed..........and you save the sales order........only then Requriements of the stocks are transferred to the Materials department i.e. (TOR).
REWARD POINTS IF HELPFUL
Regards
Sai

I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup".

I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup" to have all the other information I had from my other iPhone load up to my new iPhone. Hope you can help. What is the difference between "Backup" and "Restore Backup"; is all that different from synching.Thanks. Ana

That's up to you. Do you want the data on your old phone on your new phone? If so, you follow the directions here:
http://support.apple.com/kb/HT2109
If you want to setup your new phone as a new device, then there is nothing you need to do.

Warranty against period and/or Hrs (which ever will be First)

Dear All
Looking for your suggestion...
I have configured warranty against period (1 yr). which is working smoothly, Now company has a requirement to check the warranty against Hours as well (Eg.1000 hrs). which ever completes first. 1 yr or 1000 hrs of machin usage. how can i do it.
I had created a Charecterstic CT04 for both of them
Warranty _Period ( 12 months)
Warranty _Hours) (1000 Hrs.)
and maintainted it at Warranty master (BGM1), but when i am assiging this Master warranty to Equipment (IE01), status is negative with an error " unit of measurement doesnot supported"
can it be possible through Measuring Point?
If yes then how can i check it during Service Notification (IW51). Here i want to add a field in ehich i can enter the machin working hours Lets say 885 hrs, so it can be verify either Period or Hours.
Usually this is being practises in Automobile companies while giving Free services.
1st Free service will be valid before 1000 kms, 2nd free service will be free till 5000 kms etc.
Please help me on this.
Thanks is advance.
Sudip Sinha
Edited by: sudipsinha on Oct 18, 2011 10:59 AM

In theory, CS1 should be treated as higher than AF11. AF11 would be closer to CS1. That being said, your QoS policies can be configured to do whatever you want so your switch may be configured to drop CS1 way before it drops AF11.

.. If the app is – in or out of background - (if in background NOT the first app) and the device locked – when you get a push message and DO NOT response straight away. Later unlock, click the app icon (which will have a badge on it) and it fails.

.. If the app is – in or out of background - (if in background NOT the first app) and the device locked – when you get a push message and DO NOT response straight away. let it fade off then, Later unlock, click the app icon (which will have a badge on it) and it fails to pop up my internal alert box and my notification message is gone(cannot get access to it in code).. other times it works . Including if you tap the messaeg from app centre. (this is all on a iPod 5.1.1).
Here is someone else with same problem http://stackoverflow.com/questions/7080266/receive-remote-notification-when-ios- device-is-locked-and-im-not-responding-imm

Tell Apple
Apple - iTunes - Feedback

While executing the application which method will trigger first

Hi all,
while executing a webdynpro application which hooker method will trigger first?

Hi Naveen,
The first method called is the WDDOINIT of the component controller.
For more details on hook method please see the below link.
http://wiki.sdn.sap.com/wiki/display/WDABAP/HooksMethodsinWebdynprofor+ABAP
http://help.sap.com/saphelp_tm70/helpdata/en/45/c87f413e70010de10000000a1550b0/frameset.htm
Thanks
Pradeep

Which event will trigger first?

hi, any one can explain me the execution of at selection screen events in order.
which event will trigger first at selection-screen output or at selection-screen?

Hi,
The Selection screen sequence is-
1) AT SELECTION-SCREEN OUTPUT
2) AT SELECTION-SCREEN ON VALUE REQUEST FOR <FIELD>
3) AT SELECTION-SCREEN ON HELP REQUEST FOR <FIELD>
4) AT SELECTION-SCREEN ON <SEL_OPT>
5) AT SELECTION-SCREEN ON <PARAMETER>
6) AT SELECTION-SCREEN ON BLOCK <B1>
7) AT SELECTION-SCREEN ON RADIOBUTTON GROUP1<RAD1>
8) AT SELECTION-SCREEN
9) AT SELECTION-SCREEN ON VALUE REQUEST FOR <SEL_OPT_LOW>
10) AT SELECTION-SCREEN ON HELP REQUEST FOR <SEL_OPT_LOW>
11) AT SELECTION-SCREEN ON END OF SEL_OPT
***DO REWARD IF USEFULL
REGARDS,
VIJAY

TCP Communication - How can I remove the priority of which VI will run first?

Hi. I would appreciate for any advise.
I want to communicate (send data) to another PC using wireless radio. I am presently testing the shipped examples;
TCP Communicator Active.vi and TCP Communicator Passive.vi. I will run first the Passive.vi in the other pc (as
indicated in the instruction) and then Active.vi on this pc.
I want to remove or neglect the priority of which VI will run at first (either of the VI can run first).
If in the case either one of the PC is not transmitting data, it will just trigger a LED or any kind of indicator.
Can anyone helped me to do this? or is there any other example vi that will do it?
Thanks a lot.

Hi Mr Christian,
i decided to use TCP/IP for peer to peer communication. I made an example VI of what i am doing but i cant make it right especially on the "Time out error". I would appreciate for any advise.
Kindly see the attached VI's. The Crane 1 will be the Master or Server and Crane 2 and 3 are Slaves or Clients. Slaves VI will pass their data to Master while Master will distribute the data to each VI.
As a rule, i have to run the Master or Server first and Slaves will follow.
But as soon as i do this i am getting this Time Out error hence data are not being passed. I tried changing the values of time out constant but not lucky so far. I know that if i can fix this time out error, all the VI can communicate properly. I should see three moving cranes on each VI.
Additional question; If all of the VI are running, and I intentionally Stop for instance Crane 3 (Slave), then it will show an error (LED) that Crane 3 data is not available. So far i can do this.
But for instance I will run again Crane 3 (Slave), is there a way to RESET the connection programatically so that Master VI will once again accept the Crane 3 VI?
Any advise I would greatly appreciate.
Thanks a lot.
Attachments:
Crane 1 (Master).vi ‏40 KB
Crane 2(Slave).vi ‏35 KB
Crane 3 (Slave).vi ‏35 KB

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

That message is listed in two scripts on the bank's site. One function that can display the message is named PhotoRotator and the other is named PromoRotator. However, I can't seem to trigger the error myself.
If you have any add-ons that alter the page, such as ad blockers, try creating an exception for these sites and see whether that helps:
www.northrim.com<br>
www.northrimbankonline.com
You also could try this logon page: https://www.northrimbankonline.com/onlineserv/HB/Signon.cgi
(''Obviously you should be cautious about links offered on public forums to ensure you are not being phished! Check them out carefully before entering your username and password.'')

In plsql which block will execute first inner block or outer block...

In plsql which block will execute first inner block or outer block...
pls help...

Outer block starts execution first.
Inner block completes the execution first.
Suresh.

HT5848 Any way to move the Radio tab (Itunes Radio) right? Because it's the left-most tab, it loads first..forcing me to click on songs every time itunes loads. I'll never use ITunes Radio. The screen will forever be trying to sell me on using it. Its fr

Any way to move the Radio tab (Itunes Radio) right? Because it's the left-most tab, it loads first..forcing me to click on songs every time itunes loads. I'll never use ITunes Radio. The screen will forever be trying to sell me on using it. Its free, I know. Still not using it.

Margthecar wrote:
Apple has to stop pretending that their technology is not complicated. It is. Apple has to stop pretending users won’t have problems. They will. Apple needs to train their employees in their own technology.
Awesome post. This is the best description I've seen of what continually makes me angry about Apple. I guess their attitude is, "Whoa, look at all this money! If it ain't broke, why fix it?" And Margthecar the I keep shoveling money into their coffers ....

Which will cause a higher cpu load, the sampler instrument or the original audio tracks?

I have some piano that I wanted to loop. I had no problem using the convert track to sampler instrument. My question is about CPU performance. Which will cause a higher cpu load, the sampler instrument or the original audio tracks?

Hi Mesaboogiewes,
Welcome to Apple Discussions
Ableton.com recommends disabling Energy Saver, fullscreen mode, and Exposé. I would recommend putting the 1Gb of RAM, you will find a better result. I suggest going to the Ableton.com website and looking for more troubleshooting issues.
I hope that helps,
Jon

Which will load first?

Similar Messages

Maybe you are looking for