Which windows 7 disk should I buy?

Hello, Im planning to install windows 7 into my imac using boot camp but i dont which windows 7 disk to buy.
If someone would be so nice to send me a link of which disk i should buy i'd really appreciate it.
Thank you in advance.

You asked the same question here: https://discussions.apple.com/message/24848788#24848788
No need to post multiple times.

Similar Messages

  • Which windows program should I buy?

    I have just purchased a new I mac, intel, with a copy of parallels. I now need to purchase Windows and prefer XP. Should I buy the home edition or the professional?
    Thanks

    Hi and welcome to Discussions,
    the main difference between XP Home and XP Pro is, that XP Pro integrates better in LAN environment and features Group Policies too.
    With Parallels and an iMac XP Home is sufficient.
    Also, buying an OEM (or System Builder) version of XP Home can save you some money.
    But stay away from 'bundled' OEM version from PC manufacturer, that originally were sold/delivered with a PC, since these versions mostly only work on that particular PC.
    Have Fun
    Stefan

  • Which NI devices should I buy and how to start with?

    Greetings!
    I am an undergraduate who is trying to design a control system which can measure chemical solution conductivity as well as PH value; besides, based on those values, we need to control 4 valves to open and close so that acid, base, water,and salt from 4 tanks can flow into the main pipe.
    Question: Which NI device should I buy and start with? The devices have to have at least 4 input/output, do you have any suggestion, Thank you very much!!
    I am also new to LabVIEW, so any extra suggestion would be greatly appreciated!

    Thank you , we are considering purchasing NI USB-6008
    http://www.ni.com/products/usb-6008/
    Doest it work with the following PH sensor, one specification says that it has output voltage of Output 0-5 vdc, does NI USB-6008 accept it?
    Model A1004 pH Transmitter
    Warning
    Do not short the power connections. Wrong wiring of the signal and power wires will result in
    permanent damage to the unit instantly.
    Specs:
    Range 0-14pH
    Power: 12vdc 500ma nominal
    Output 0-5 vdc
    Material ABS
    Calibration trim pots
    Distance up to 50ft
    Model A1004 is a pH transmitter designed to be used with PLCs and microprocessors that accept
    analog input of 0-5vdc.
    Connect any general purpose pH sensor to the transmitter. Double junction sensor is preferred.
    Calibrate unit with 4 and 7 pH buffer solutions. Use zero trim pot to adjust 4pH and span trim pot to
    adjust 7pH..Fine tune adjustment is done with span trim pot.
    If you do not have a sensor , short the bnc connector ,this will simulate 7pH and observe output voltage
    of 2.5vdc.
    Din connector provides power and signal from one cable.
    Note.: When connecting signal and ground to the PLC input ,use .01uf capacitor across signal
    and ground to filter any noise issues.

  • Which iPad Retina should I buy in the US so it will work in the UK?

    I am going to the States next month and want to buy the new iPad there.  Which iPad Retina should I buy in the US so it will work in the UK, the AT&T or Verizon model? I'm probably staying with O2, but can't tell if different models are sold in the UK, or if its just the one.  If just the one, I can't find which model number it is for the UK. The apple store website isn't exactly clear on which model(s) is/are sold in the UK.

    Hi,
    We don't have cellular, but I have often read many ques. and answers here just for my own info when we were first buying. I do know that in the past, Verizon had a different system than ATT and others. That could all have changed with LTE. I checked a couple of articles and found the following links which might help you. PLEASE NOTE these were published in March and May of 2012, so things might have changed with the new ipad 4. Also note that you can buy a cellular here without a contract that you could then set up with your own UK phone company.
    http://www.tomshardware.com/news/Apple-iPad-UK-4G-LTE-Australia,15634.html    May 15, 2012
    http://apple.stackexchange.com/questions/43972/are-the-new-ipads-ipad-3-for-sale -in-the-us-unlocked-for-the-uk    Mar. 2012
    You also said you wanted retina display and then said you were probably staying with 02. If by that you mean the ipad 2, I want to let you know that the ipad 2 does NOT have the retina display. That would mean you'd have to get the old discontinued 'new' ipad or the ipad 4. And if I were you, I would not even think of buying an old 'new ipad, even if there's a great sale on them. I'd go straight to the ipad 4.
    Make sure you do as much research as possible.
    Hope this helps.

  • Which refurbished iPhone should I buy to work with my iPad 3 wifi.  Will I need a personal hotspot?

    Which refurbished iPhone should I buy to work with my refurbished iPad 3 wifi?  Will I need a personal hotspot?

    I'm having the same problem.  The iPad has never roamed particularly well between access points, but under IOS6 it doesn't seem to roam at all, it simply sticks with the access point it first connected with.
    I don't have a solution for you, unfortunately.

  • Which macbook pro should I buy?? 13 or 15??

    I am planning to buy a macbook pro but I don't know which macbook pro I should buy.
    Games are not that important to me, however I play games such as call of duty, nba 2k, need for speed sometimes. Portability is important to me because it is compulsory for bringing laptops to school. I am confused on buying which macbook pro because the gpu of 13 is bad but 15 might be too big and heavy.
    So which macbook pro should I buy?

    Hi Lawrence,
    You've point out some of the important factors. For me, the choice would be easy. I'd gladly put up with a bit more bulk/weight to have a 15" display. ymmv

  • Which macbook pro should i buy if i use finalcut7?the i5 or i7?

    which macbook pro should i buy if i use finalcut7?the i5 or i7?

    Either one will do the job.  The more powerful the CPU, the faster it will perform.  I suggest that if the budget is tight, go for the i5, if not go for what the bank account will allow.
    It is nice to have a fast CPU, but they are not essential to the overwhelming applications that most people use, especially in a non-vocational context.  On this forum there are the 'speed freaks' who will tout the virtues of faster CPUs, yet most have never compared two MBPs side by side and experienced the differences of real world results.
    Ciao.

  • Which macbook pro should i buy?

    I am looking at buying a new macbook after 6 years with my current one which is running really slow. I will be using the macbook pro with the retina display 13 inch to -
    1. Add photos and videos as well as edit them as well possibly by using adobe photo shop
    2. Surf the internet
    3. Update my blog
    4. Basic Web design
    Which macbook pro should i buy for the tasks that i plan to do??
    The 256GB with the i5 processor and buy a 1TB external hard drive
    or 256GB with the i7 processor and buy an external hard drive
    or go max out at buy the 512GB with the i7 processor

    Consider this option.
    lknights1987 wrote:
    or go max out at buy the 512GB with the i7 processor
    Best.

  • What Windows 8 Should i Buy for Bootcamp?

    I do not have a windows OS of any kind installed on my mac. I would like to get windows 8 for my mac from amazon.co.uk .
    Windows 8 Pro, Upgrade Edition [Upgrade from Windows XP, Windows Vista, Windows 7] (PC)- this is the main one that pops up but its an upgrade??
    When i search windows 8 on amazon.co.uk and on other sites the only products i see are upgrades from older versions, but i dont have any older versions of the Windows OS installed on my computer. So to cut a long story short, what windows 8 should i buy for bootcamp. Please could you provide a link, preferbly amazon or if not a UK website.
    Thanks.

    Here are a few links I could find that are aparently the full install not an upgrade. I'd check with the seller to be sure though.
    http://www.jr.com/microsoft/pe/MSI_8PR64B1PK/
    http://www.softwareking.com/WIN8.html?gclid=CNTc4t7nprMCFQ2znQod0nQA6Q
    http://www.newegg.com/Product/Product.aspx?Item=N82E16832416552&Tpk=32-416-552
    http://www.newegg.com/Product/Product.aspx?Item=N82E16832416550&Tpk=32-416-550

  • Which Latitude Computer Should I Buy?

    I am heading to college and I've decided to get a Latitude Dell computer to last me my undergraduate. However, I am undecided about which Latitude I should buy. I want the one that is going to run best with creative suite production premium cs6 but if the power difference in the computers makes no real difference on which computer I'm choosing I would buy the cheaper one and buy an external hard drive. I have difficulties understanding computer specs so its hard for me to understand how different the computers are from each other though it seems the biggest difference between the computers are the hard drives and the screen size (14'' vs 15.6''). I'll list the two specs bellow.
    Intel 2.9 GHz i7 Processor;
    64 Bit;
    500GB 7200rpm Hard Drive;
    8 GB RAM; 14.0 " HD Anti-Glare LED Display (1366x768);
    Intel HD Graphics 4000 Video Card
    Enabled; 6-Cell (65WH) Primary Lithium Ion Battery
    or
    i7-3720QM Processor (2.6GHz Quad-Core)
    Windows 7 Pro, 64-bit
    15.6" FHD (1920x1080) Wide View Anti-Glare WLED-backlit display
    NVIDIA NVS 5200M Discrete 1GB Graphics card
    8 GB RAM
    750GB 7200rpm Hard Drive
    9-cell battery, 90-watt A/C adapter
    I am also curious to hear your opinion on Latitude computers and if you think I will have any problems with production premium or the computer in general.

    If you are not doing video or 3D modeling/CGI work, you maybe able to get by with either base model, 27 inch iMacs.
    If you can afford it get the 27 inch iMac with the faster i5 CPU. The GPU is not that big an issue with 2D or flat images.
    So, I think you would, also, be fine with the base 27 inch screen model with only 1 GB of VRAM.
    WIth photography, it's all about CPU, RAM and storage size/space.
    Purchase this 27 inch screen iMac with the base RAM and purchase additonal, cheaper RAM through third party RAM vendors.
    Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
    The 27 inch screen iMacs can take a total of 32 GBs of RAM.
    After purchase, I would advise installing, at least, another 8 GBs of RAM for, at least a total of 16 GBs of RAM. Install more RAM if you can afford it.
    As far as storage is concerned, forget the base 1 TB standard hard drive and consider installing, at purchase time,  the 3 TB Fusion drive, instead.
    OR (again,if you can afford it) consider the 512 GB Solid State Flash Drive and use external drives for image storage when the storage on the Flash drive becomes full.
    WIth the Mac Pro, you are forced to use external storage (extra costs) as well as forced to having to purchase a good, color accurate external monitor with image editing and color correction work (another additional and expensive purchase).
    The iMac is a completely all-in-one purchase solution versus a individual component system like a Mac Pro system.

  • Which Colour Laser should I buy?

    I have given up trying to get my Apple LaserWriter pro 630 to work with 10.6 so now I need to buy a new printer. Which reasonably priced colour laser printer should I buy?
    I have a 27" iMac, a 24" imac, 17" Powerbook G5 and hopefully soon a second generation iPad which all need to print to the laser. The printer needs to take ethernet possibly wirelessly and USB would be a bonus. I don't have a very heavy usage but it must be capable of occasionally printing up to 200 copies.
    On principle I wouldn't buy Dell after the 1997 comment!!
    Do you have any suggestions?
    Many thanks
    David

    There is a good discussion on Macintouch today about color laser printers, and how the cost of consumables can greater than the cost of the printer itself. You should keep that in mind as you consider your options. The print quality is very good on most of them, USB and ethernet is pretty standard, with wireless a common option these days. But it is not necessarily the case that a color laser is less expensive to operate than an inkjet. I have both, and I think they have about the same costs. I save the laser for multiple copies, and prints that need to be water resistant, but the inkjet is my everyday printer. The laser is faster for multiple copies. That is its big advantage, but it is somewhat mitigated now that I am trying to eke out extra pages from the cartridges.

  • I am switching from a PC to a Mac Pro OS1.7. Which Quicken program should I buy in order to transfer my old Quicken files from my PC?

    I am switching from a PC to a Mac Pro OS 10.7.4. Which Quicken should I buy in order to transfer my old Quicken files from my PC to my Mac? Will the files transfer?

    Quicken Mac 2007 (Lion Compatible). 
    Do NOT choose Quicken Essentials for Mac. It is not compatible with anything.

  • Which Mac Mini should I buy for use with a 65 inch Panasonic GT30?

    Im very interested in surfing the web from the comfort of my Lay Z boy.  I have a 65inch Panasonic GT30 tv along with an Onkyo TXNR609 av receiver that handles everything (DirecTV, PS3, X360, Wii, Apple TV).  My only concern is the lag issue in dealing with the big display.  Should I buy the base modle with the slower processor and upgrade the RAM?  Or should I buy the i7 and rock out that way?  I can afford either but would like to spend the least considering this isnt going to be the main computer in my house.  Thanks for any advice!!

    If you ever (*ever*) want to fire up a serious 3D game (one with a 2010+ appetite for GPU power), go for the midrange model with the real videocard. If you only want to browse the web, maybe do some flash, things like that, the low end model has enough videocard for that. That Mini has the same Intel HD Graphics 3000 as my MBA13/2011 does, and that is currently driving my external 24" 1920x1200 screen just fine. Your TV is 1920x1080, so that even though it may have a lot more inches, it has fewer pixels than that, and it's the pixels that cost GPU power, not the inches. Size doesn't matter, its what you do with it!
    Since you're comfortable upgrading the ram yourself, obviously put in 8 or 16 instead of the 2 or 4 it comes with. The pricing on that ram is insanely low right now and while I'd personally go for the 16 on a desktop machine, I reckon for your intended usage 8 is well more than sufficient (4 would probably work, it does on aforementioned MBA13 after all), and it's about $50ish difference which is not nothing.
    If you can live with a small capacity drive, and are willing to open up the Mini further than just the base cover over the ram, I'd recommend getting a 128 GB SSD and installing it. The Apple price for the 256GB SSD, only on the midrange, is probably not worth it. You can even get a second-hard-drive-kit from one of the two well-known vendors and add the SSD while keeping the existing drive as an internal storage drive.
    P.S.: I don't actually believe in CPU upgrades. Even when you start with the midrange, the i7 is still $100 and that will also buy you that SSD, or get you most of the way to that SSD plus the second hard drive kit. The difference in performance between the i5 at 2.5 and the i7 at 2.7 is really pretty darn minimal, so as long as you're choosing to do one thing and not the other, get the SSD before the CPU upgrade, no question. If you wanna go full-option balls-to-the-wall-everything-maxed, that's another thing, just don't go for the i7 upgrade as the first thing.
    P.P.S.: Now that the 2012 MBAs and traditional MBPs are out, it seems likely that a Mac Mini refresh is coming relatively soon which contains an Ivy Bridge CPU and chipset (which means USB3 and HD4000), a more capable discrete GPU in the versions that have them, and (speculation tempered with hope) one of those new 35W TDP Quadcores in the midrange model, possibly as the CPU upgrade (pretty please, Apple?). It might be worth waiting for. On the other hand, waiting for new computer hardware is also a chump's game. There's *always* something better around the corner.

  • Which reader & writer should I buy?

    HI everyone,
    I have done extensive research about java card reader,writer and software kits. I have found three possible devices. can you please help me to decide which one I should buy:
    1. MoTechno- http://www.motechno.com/java-card-sdk.0.html
    -500 EURO Apprx
    http://www.motechno.com/rfid-sdk.0.html
    -500 EURO Apprx
    2. Gemalto Gemplus RAD SDK Kit for Contact Java Card
    -1000 EURO
    Gemplus GemPROX SDK Kit for Contactless Java Card
    -1000 EurO
    3. Giesecke & Devrient : SmartCafe Pro Toolkit -450 Euro
    4. JCOP- I have no information about it

    Thanks.
    but how do i load the applet onto a card. a reader
    would
    only allow to read it in response to APDU commands. No. A "reader" (the better name would be "[smart]card terminal") allows you to send APDUs to the card and receive the response-APDUs. What the card does with the data you sent to it depends on the APDU you sent. Some APDUs allow to store data on the card or install an applet. Therefore there are no "reader" on the market which allow to read but not to write to java cards/smart cards.
    Jan

  • Which Windows OS should I chose to run Autocad/Revit?

    I purchased a Mac Book Pro for my son in college (OS 10.5). He needs to run Autocad & Revit for his classes. We've decided to use boot camp instead of parallels or other options. My question is how do we know which windows OS to chose? I've heard Vista has had problems. is there a reason to use a professional version as opposed to standard? All help is appreciated. Steve.

    If I was starting out, and new I had to run Windows natively...
    a) Vista has been out about two years
    b) there are issues with anything
    c) does Revit and Autocad recommend any hardware spec
    I would have gotten a PC with Intel Core i7 920, 6GB DDR3 memory, high end graphics, and either Home Premium 64-bit or Ultimate. Price: $1300 plus cost of hard drive, graphics, and OS, that would plow through and flatten any work load.
    http://www.visionman.com/visionman-premium-barebones-core-i7920-266ghz-quad-core -6gb-ddr31333-asus-p6t-deluxe-mobo-p-7868.html

Maybe you are looking for

  • OBIEE - Null Value in Joins

    Hi All, In OBIEE, How will I handle the null value in join conditions? I have 2 tables inner joined together in the RPD level. They are User_Profiles table and Parties table. I am creating a database prompt for a report and in dropdown sql results Ia

  • Open image in Swing Application

    Hi, I'm having trouble getting an image to open into my swing application and I cant figure out whats wrong. In response to selecting the "Open" button or menu item a JFileChooser opens up and i select an image but the image doesn't actually load. If

  • How to change preferences for all users in a Citrix enviroment

    Hello. I need change some preference settings for all users in my Citrix enviroment. I know change the preference settings for a user, of course, but a have 160 users and a need to change some settings configuration one time on the server for all use

  • I tried upgrading iTunes and it says I'm missing the file AppleVersions.dll .  What do I do?

    I recently uninstalled one of those "free trial" music download things, and now my iTunes won't work. I tried uninstalling and reinstalling, but I keep getting the same message "AppleVersions.dll is missing" What do I do? I've been trying to fix this

  • Fax output - Chinese characters are garbled

    Hello, We are using fax output for two forms ( One smartform and the othe sap script). Both the form outputs are thorugh  the same fax device. For the smartform output there are no issues and the output is as expected but for the sap script output th