Which wireless conferencing device comparable with Cisco

Hi
I am fairly new to wireless and need some clarification about Voice conferencing. We have Cisco call manager now my office want make a voice conferencing with other office .we are looking a conferencing device which should be wireless and getting IP via wireless goes through our call manager to other site. Can anyone tell me which wireless conferencing device comparable with Cisco call manager for voice conference and what we have to do to make voice conference.Any help would be appreciated.
(Meeting Room)Voice conferencing device ----->access point----->LAN-àCisco call manager---à
Router  ------->  Internet cloud  ------àRemote site meeting room
Thanks
Aminul

You definitely need a WLC/WiSM, that's for certain.  Your WLC/WiSM needs to run Mesh IOS/Firmware.
BUILDING IS IN A ROUND SHAPE. WALLS ARE THICK AROUND 20 CM. WE CAN CONNECT ONLY ONE AP TO THE ROUTER WHICH IS ALREADY CONNECTED, OR WE CAN CONNECT ANY WIRELESS ROUTER ITSELF ON THE PLACE OF EXISTING ROUTER.
How do you plan to power up the APs?
Next tricky part is what type of Mesh WAP are needed.
You need 1500 Mesh AP.
Cisco Aironet 1520 Series Lightweight Outdoor Access Points
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps8368/data_sheet_c78-532987.html
Cisco Aironet 1520 Series Lightweight Outdoor Access Point Ordering Guide
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps8368/product_data_sheet0900aecd8066a157.html
Cisco 1520 Series Outdoor Mesh Range Calculation Utility
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps8368/1520_Link_Calculator.xls
NOTE:  Try avoid using all caps when typing.  It's rude.

Similar Messages

  • Which wireless mouse is compatible with my 2007 MacBook?

    Which wireless mouse is compatible with my 2007 MacBook?

    i have bought several wireless mouse for my macbook air, macbook and macbook pro - i have never had any issues with any of them - my niece has a macbook black and uses a $14 wireless mouse purchased from Wal Mart.

  • Which wireless router works best with Apple products?

    Which wireless router works best with Apple products?

    I cannot comment of Airport products, as I have none.  Nor would I suppose to argue with Kappy or Ralph.
    But in a pinch a LinkSys E2500 will work, as it does for me.

  • Wireless site survey doubts with cisco aironet site survey utility tool

    Hi,
    I have 1131 autonomous AP and we have project where we need to implement WLC 5500 with 1140 LAP.
    Before that , we need to do site survey . we are going to use cisco aironet adapter and with the help of site survey utility tool we are planning to do site survey .
    I have below doubt before starting the site survey :
    1) do we need to configure the AP 1131 with existing LAN set-up of client to get connected ?
    If yes , how can i shift this 1131 ap always from one location to another location and connect to respective vlan in switch ?  It would be tedious job ....
    because , We need to connect ( get associated ) our laptop always to 1131 ap and then roam around to get the RSSI , signal strength , SNR and throughput ....  ...
    to configure the AP to existing lan set-up of client , it would not be flexible to do site survey ?
    without that , how can I just plug-in power to 1131 AP with standalone configuration .... and without connecting to switch ( any lan-port ) , do the site survey ?
    Please suggest me .............
    In short , without connecting to LAN set-up of client , how can i do the site survey ?
    2) will it be worth to do site survey with cisco aironet card ( site survey utility ) ? or we should i have different site survey software for the same ?
    Please share the knowledge .... 

    Site Surveys are important and should be done by a professional. A poor site survey can lead to a lot of problems. It would be hard to put all aspects of conducting a proper site survey in a single post. Lets cover a few of the basics.
    1) If you plan to deploy 1140 model access points. Then you should use that AP in autonomous mode so you dont have to be plugged into your network
    2) The AP gets powered by an exteral power source like this battery for exmaple:
    http://www.tessco.com/products/displayProductInfo.do?sku=345625&WT.mc_id=google_base&sp=true
    3) As far as moving the AP around you can purchase a site survey pole like this:
    http://www.tessco.com/products/displayProductInfo.do?sku=392506&eventPage=1
    4) As for software, I like AirMagnet Surveyor
    http://www.airmagnet.com/products/survey/
    But again. There is a lot to know about doing surveys...

  • I have 2 Apple IDs, 1 associated with all the family devices and the other which has no devices associated with it.  Is there a way to split out the devices between the 2 IDs without losing apps(iPhone) and music (ipod classic)?

    I have 2 Apple IDs.  1 associated with all the family's devices and the other with no devices associated with it.  Is there a way to split out the devices between the 2 IDs without losing Apps (iPhone 4s) or music (iPod classic)?

    i'd be inclined to leave things as they are. Managing app updates over more than one account in the same library or device requires you to sign in and out of each account in turn. You cannot transfer content from one account to another.
    tt2

  • Which Wireless Router works well with Satellite A200-401

    Just about to buy a Satellite A200-401 notebook can anyone suggest a good affordable wireless router that works well with this?
    steve

    Hm, thats a strange question because I doesnt depends on the machine, more on the installed wireless card. But usually a Netgear router is always a good choice...they are reliable, dont need much power and you can extend your network range with these special Nergear "Range externders".
    I have a Netgear WGR614 and it works like a charm, it has everything you need.
    Heres a link:
    http://www.netgear.com/Products/RoutersandGateways/GWirelessRouters/WGR614.aspx
    Check it out. :)
    Greets

  • Facing issue in integrating with Cisco ISE

    We are trying to integrate our product(Cisco Prime Infrastructure) with Cisco ISE for Authentication and Authorizations. We already support PAP/CHAP, and not trying to add support for EAP-TLS.
    Currently during our integration, facing TLS payload errors. We are using jradius library for talk to Cisco ISE for authentication and facing the below TLS error in ISE logs. Tried with Cisco ISE 1.2 and 1.3 versions.
    Event                                    5400 Authentication failed         
    Failure Reason                  11500 Invalid or unexpected EAP payload received        
    DetailedInfo                      TLS packet parsing failed: total accumulated size plus this last fragment size is greater than expected total TLS message size
    Any pointers to resolve this problem or any other free java based client library instead of jradius which is tried out successfully with Cisco ISE would also be great.
    Regards
    Chandrakumar

    DECLARE
    CURSOR s_cur
    IS
    SELECT eno FROM emp;
    TYPE fetch_array IS TABLE OF s_cur%ROWTYPE;
    s_array fetch_array;
    BEGIN
    OPEN s_cur;
    FETCH s_cur
    BULK COLLECT INTO s_array;
    CLOSE s_cur;
    FORALL i IN 1 .. s_array.COUNT
    INSERT INTO (select eno from emp_temp)
    VALUES s_array (i);
    END;
    Its working, but not understood the concept.
    INSERT INTO  (select eno from emp_temp)
    VALUES s_array (i);
    How it works?

  • Azure multiple site-to-site VPNs (dynamic gateway) with Cisco ASA devices

    Hello
    I've been experimenting with moving certain on-premise servers to Azure however they would need a site-to-site VPN link to our many branch sites e.g. monitoring of nodes.
    The documentation says I need to configure a dynamic gateway to have multiple site-to-site VPNs. This is not a problem for our typical Cisco ISR's. However three of our key sites use Cisco ASA devices which are listed as 'Not Compatible' with dynamic routing.
    So I am stuck...
    What options are available to me? Is there any sort of tweak-configuration to make a Cisco ASA work with Azure and dynamic routing?
    I was hoping Azure's VPN solution would be very flexible.
    Thanks

    Hello RTF_Admin,
    1. Which is the Series of CISCO ASA device you are using?
    Thank you for your interest in Windows Azure. The Dynamic routing is not supported for the Cisco ASA family of devices.
    Unfortunately, a dynamic routing VPN gateway is required for Multi-Site VPN, VNet to VNet, and Point-to-Site.
    However, you should be able to setup a site-to-site VPN with Cisco ASA 5505 series security appliance as demonstrated in this blog:
    Step-By-Step: Create a Site-to-Site VPN between your network and Azure
    http://blogs.technet.com/b/canitpro/archive/2013/10/09/step-by-step-create-a-site-to-site-vpn-between-your-network-and-azure.aspx
    You can refer to this article for Cisco ASA templates for Static routing:
    http://msdn.microsoft.com/en-us/library/azure/dn133793.aspx
    If your requirement is only for Multi-Site VPN then there is no option but to upgrade the device as Multisite VPN requires dyanmic routing and unfortunately there is no tweak or workaround due to hardware compatibility issue.
    I hope that this information is helpful
    Thanks,
    Syed Irfan Hussain

  • I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

    I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
    thank you!

    Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
    This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
    It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Express
    Click Edit in the smaller window that appears
    Click the Wireless tab at the top of the next window
    Click Wireless Options near the bottom of the next window
    Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
    Click Save, then click Update and wait a full minute for the Express to restart
    Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name.  2.4 GHz devices will connect to your "other" network name.

  • MacBook and MacBook Pro with 10.6:  Wireless Airport Issues with Cisco

    Long Story but please bear with me:
    Loaded SL on my daughters MacBook and my MacBook Pro. Internet worked flawlessly at our house (WEP encrypted) and on other public wifi. When my daughter went back to her sorority house at college 24 hours later, she could not access the internet using the sorority house network (Cisco Aironet 1800 router and Cisco Airo Access Points).
    Her Airport on the MacBook appeared connected at full strength yet no internet. Two calls to Apple support (they were very nice) did not help. All the following were tried:
    1. Reset PRAM
    2. Deleted Airport and Safari plists
    3. Edited locations
    4. Removed Battery
    5. Others I cannot now remember
    Still no net. However, she could 'pirate' and hop on line with other identified public wifi adjacent to the sorority house. I drove to the sorority house today and tried to get on the network wirelessly using my MacBook Pro with SL. Same identical results to hers. Another MacBook without SL works great and gets right on the network.
    Is this some SL influenced issue with the Airport card and the Cisco system? Weird that both of our laptops work great with several other wifi networks but not the one at the sorority house.
    Could much of what we all our seeing with the internet access problem lie not with issues within our software or computers but with the routers and access points not being compatible? I have very little understanding of this stuff (as you all can probably tell) but the Apple Support people acted like it was a old firmware issue with Cisco and not with SL. Not actually what I wanted to hear.
    Any ideas or suggestions?

    Your description there, particularly the last part, sounds like my problem. At home, we connect using Airport and ADSL which was OK, once SL had sorted out passwords.
    At my office, where there are two wifi systems, I could not get on either, although did have IP numbers on both. The link to the outside world is via a proxy which uses a PAC file. Network Diagnostics reported each time (whatever I did) that the link to the server was OK, but the Internet was not.
    I created a new Location with identical settings (typing them in and not copying) and the only visible difference is that the new location has no DNS numbers -- I had not noticed that before. The moment I pressed, Apply, the computer was online.
    I was guessing that there was a conflict in a .plist file somewhere; but now I wonder if DNS might have been the reason (the DNS number usually used is the one from the router itself).

  • Windows 2k8 Radius Server with Cisco Wireless Controllers

    We currently are using a Cisco 4400 wireless controller with an older Cisco Secure ACS appliance that is going EOL.  My hope was to just connect our 4400 Wireless Controller to a Windows Server 2008 Radius Server (Just using Microsoft's Network Policy Server) but have not had any luck in getting this to work.  Does anyone have an easy to follow set of instructions on configuration of Microsoft Windows Server 2008 NPS for use with Cisco Wireless Controllers?  Any advise would be greatly appreciated.
    Thank You,
    Jim

    Hi NPT,
    Here is the post which may help you!!
    https://supportforums.cisco.com/message/3073519
    Regards
    Surendra

  • Issue with Wireless Portable Devices

    Dear Xperia: When I  try to connect my Xperial M Dual  Smart phone to the system I am getting the following message "Xperia Mdual has not been configured. Unable to associate your device with this system. You will need to manually enable the "Wireless Portable Devices" firewall exceptions while connected to public network. Also request you to kindly help me advantages of  configuring and associating the device with system and being connected to public network in the sense does this function help as a secondary internet backup. Expect ing a an expert advice as always from Sony. Regards  Murugu D

    I'm not sure if you are trying to connect your computer to the internet using your phone or if you want to connect it wirelessly to share files. Could you please clarify?
    The message you're seeing is because you are connected to a public network and in that case your computers firewall will block UPnP which is used to connect wirelessly to share media between the phone and computer. Are you sure you want to open your firewall for this on the network you're connected to? You don't need to do this for using the phone as a modem.

  • EA4500 with manually updated firmware and wireless IOS devices DROP CONNECTIONS

    i immediatly manually updated the firmware on my ea4500 to the newest version.
    to get my ipad2 and/or iphone to work with my router after they have been sitting idle for a long time, say overnight i must turn them off and turn them back on or restart the router.
    i have time warner cable<ooma telo<ea4500.
    i never had this problem with this setup with my ea3000.
    any help would be appeciated.

    I think the easier "Factory Defaults" will be sufficient in most cases (as long as you stay with Cisco factory firmware, which sofar will be true for the E4200v2 and EA Series).
    Step 1: Write down (or make screen copies) of all the setting changes you made compared to "default".
    Step 2: Use a wired connection from Router to PC, with the PC set to DHCP or an IP address within the Routers range.
    Step 3: Administration>Factory Defaults>Restore Factory Defaults
    Step 4: Wait 5 minutes.
    Step 5: Login to 192.168.1.1 with the default Username: admin and Password: admin
    Step 6: Manually bring all your required settings back in, as noted in step 1.

  • Hi. Does anyone know how to extend the airport express and extreme with Cisco Router DPC3925. I have upgrade my wireless to 50Mbps. Thank you

    Hi,
    Can someone help.
    I have a Cisco router DPC3925 provided by the ISP and I cannot extend my wireless with Airport Express.
    Also I intend to extend it with Airport Extreme.
    Please help.
    Thank you.

    Sorry, but your post is not clear. The topic of this thread is how to extend an AirPort Express or AirPort Extreme with a Cisco router.
    This would mean that the main router was an AirPort device and the Cisco would be extending the existing network provided by the AirPort.
    Is that really what you want to do?
    If not, then it sounds like your Cisco ISP provided wireless router is your "main" router and you will be using the Time Capsule to extend the network.
    Please start another post to tell us exactly.......
    What device will be the main router providing your Internet connection and wireless network
    What device will extend the network
    What operating system that you have on your Mac or PC

  • Which wireless all in one printers work best with ipad 4

    Please help me decide which wireless all in one printer works best with the ipad 4.  I am looking for better photo printing quality, but not the very best.  I am concerned mainly with being able to set up the printer using only my ipad 4 and wireless router, as I do not own a PC with a cd/rom.  I am also interested in which brand of compatible printers is less expensive to buy ink and paper for.  I would prefer a more compact unit.  Thank you in advance for any advice.

    These days I prefer Brother printers. They appear to have engineered their printers with AirPrint as well as OS X compatibility from the start, unlike certain others who appear to have included it as an afterthought.
    Brother's models are inexpensive, their ink is also inexpensive and lasts a long time, and their photo quality is at least as good as anyone else's. They have a two year warranty and lifetime free technical support with people who understand Apple.
    Read the reviews (Amazon for instance, but be sure to read user reviews on the various manufacturer's websites as well) and decide for yourself.
    Brother™ Monochrome Laser Printer and All-in-One models now support AirPrint.
    Brother™ Color Inkjet All-in-One units now support AirPrint.
    I positively detested every inkjet printer I ever had until I bought the Brother.

Maybe you are looking for