Which wireless router works best with Apple products?

Which wireless router works best with Apple products?

I cannot comment of Airport products, as I have none.  Nor would I suppose to argue with Kappy or Ralph.
But in a pinch a LinkSys E2500 will work, as it does for me.

Similar Messages

  • Which Wireless Router works well with Satellite A200-401

    Just about to buy a Satellite A200-401 notebook can anyone suggest a good affordable wireless router that works well with this?
    steve

    Hm, thats a strange question because I doesnt depends on the machine, more on the installed wireless card. But usually a Netgear router is always a good choice...they are reliable, dont need much power and you can extend your network range with these special Nergear "Range externders".
    I have a Netgear WGR614 and it works like a charm, it has everything you need.
    Heres a link:
    http://www.netgear.com/Products/RoutersandGateways/GWirelessRouters/WGR614.aspx
    Check it out. :)
    Greets

  • Which cable modems work best with Time Capsule?

    Which cable modems work best with Time Capsule? I have Time Warner in SoCal. I am replacing my old Motorola cable modem (constantly cuts out and needs to be reset) and I also bought a new Time Capsule. I will be using the Time Capsule for my wireless network and for back ups. Thanks.

    These are the cable modems supported:
    Vendor
    Model
    Motorola
    SBG6580
    Motorola
    SB6141
    Motorola
    SB6121
    Motorola
    SB5101
    Motorola
    SB5101U
    Motorola
    SBG901
    Netgear
    CG3000D
    Netgear
    CMD31T
    Zoom
    5352
    Zoom
    5350
    Zoom
    5341J
    ZyXEL
    CDA-30360
    If anyone has used one of these with Time Capsule, feedback is appreciated. Thanks.

  • Which camera will work best with the MAC? NIKON or Canon

    Contemplating on buy a camera and a MAC, but need to know which camera will work best with a MAC, Nikon or Canon? Any info is appreciated

    Both will work very well. You might not even need to install the software that comes with them because they'll probably work fine with iPhoto etc. Before you buy a camera, check this list of cameras supported by OS X:
    http://support.apple.com/kb/HT3825
    Just about all Nikon and Canon cameras are on that list. If a camera is so new it is not yet on that list, it will be in the next update, probably.
    That list is for raw format compatibility. If your camera also shoots JPEG, it will work with a Mac even if it's not on that list. If a camera doesn't work by plugging in a cable, take the card out and put it in an ordinary USB card reader and the Mac will read it.
    Nikon has a slight advantage in that it supports a mode that lets the Mac mount a camera like a disk on the desktop. Canons don't mount on the desktop, but it's not really a disadvantage, because Canons still work great with Apple iPhoto, Apple Aperture, Apple Image Capture, and Adobe apps, and all of those are more efficient ways of transferring photos than dragging them out manually.

  • Which bluetooth clicker works best with an iPad?  I'm looking at a Targus AMP11US.

    Which bluetooth clicker works best with an iPad?  I'm looking at a targus amp11us.

    This sounds like a price match question. Without knowing all the details, it sounds like a yes for the Westinghouse, but I would encourage you to read the price match policy link here:
    http://www.bestbuy.com/site/Help-Topics/Bestbuy.com-Price-Match-Guarantee/pcmcat204400050011.c?id=pc...
    If all you care about is 1080p definition and an HDMI input at a $300 price point then this tv should suit your needs. (As a bonus it has 120Hz refresh for smoother action scenes.)http://www.bestbuy.com/site/Westinghouse+-+40%26%2334%3B+Class+-+LCD+-+1080p+-+120Hz+-+HDTV/5772998....
    Although I do work for the Best Buy, all comments and opinions are my own.

  • Which Digidesign interfaces work best with Logic Pro ?

    Can anyone tell which of these work best with Logic if any at all?
    - Digi-003
    - M-Box Pro
    - M-box2
    - M-Box mini
    - M-Powered

    Thanks for the posts
    After hearing complaints about latency, driver
    issues, horrible quality,incompatibility with there
    plugs in logic as well as no chance to stand against
    performances and sound quality of other hardware half
    there prices i thought to ask.
    Wow. All that??? And then they recommend Migraine-Audio to you??? I don't think those posters know what they are talking about.
    I've been using Logic since it could be used with Digidesign hardware, from version 4.8.1, and it has always worked very well.
    It does pay to research the setting up of a DAW computer, as it is almost never just "plug-n-play" like many people believe. But once it is set up, it can run for years without problems. Most people experience problems because they change the setup, install free plugins, change audio gear, every other day of the week, and of course, that makes for a very unstable situation. No wonder they complain. But it is their tech-ethic they should be complaining about, not the equipment.
    Can anyone verify there set ups and latency?
    Here's one extensive test I did on my Digi 002R:
    http://nicksevilla.com/logicpro-som/LogicTests.html
    The latency is the same as with other comparable FireWire interfaces. Not more, and not less.
    i wont drag this out into a long post i just want a
    round about, all logic users in other forums seem to
    be against Digi hardware, most advised to buy the
    cheapest possible M-Audio interface just to run M
    Powered Pro Tools if i realy need PT at all.
    Really??? All of them???And did they know they are advising you to buy stuff that actually does NOT work properly??? Shame on those posters you read, as Digidesign drivers are a LOT more stable that the Migraine-Audio ones. Digidesign themselves told me to stay away from M-Audio... so you read into that whatever you like. I'll keep that advise from them.
    Cheers

  • Which OSX version works best with Logic Pro 7.2

    Hello everyone,
    Was hoping i could get some opinions on which osx version works best with logic 7.2
    i currently have OSX 10.4.2 but i would like to update at least to 10.4.3 (that is least required to run logic as stated in install manual)...
    should i go for 10.4.4, 10.4.5 or 10.4.6 ?
    which would run best with logic pro 7.2?
    thanks much everyone
    Quad G5 2.5ghz 3GB RAM   Mac OS X (10.4.2)  
    Quad G5 2.5ghz 3GB RAM   Mac OS X (10.4.2)  

    10.4.5 was rock solid for me, and three days into heavy Logic use at 10.4.6 is proving to be just as good.
    Get caught up, and go ahead and update to 10.4.6

  • Communication Error with wireless router, Works fine with Ethernet cable.

    Video iChat is fine when my MBP and other MB's and MBP's are at my house using the Netgear 240 rangemax wireless router. I'm currently running High speed Internet via cable modem through Time Warner Cable. When I try to chat with them while they are at home, I get a communication error. I then tried to use the Ethernet cable hooked up to the cable modem to my MacBook Pro. It worked fine. I would like to use video iChat via my wireless router. I don't understand why it is not working. I think it is my router. Do I need to buy an Airport Extreme Base Station or can I still use this router. Can you possibly help me configure this Netgear router? The internet connection is fine when I use the wireless router.
    MBP 15" C2D 2.33   Mac OS X (10.4.8)   Cable Modem, Netgear RangeMax 240 WPNT834 wireless router

    I have not had very good experiences with the Netgear routers. I can't say that it is the router causing your problem, however, it might be the effective wireless bandwidth over your router. Do a speedcheck and determine the download and upload speed with wireless. Hopefully you're getting about 400Kbps up and 400Kbps down or about 1000Kbps in total.

  • Which printer brands work best with Mac?

    Well, it sounds like my HP LaserJet 3015 will not duplex with my new Mac (only with PCs, I guess), so I am going to need a new printer. Does anyone have suggestions on which brands of printers work well with the Mac? Thanks in advance...

    There are a number of Laserjet 3015 models. Some have automatic duplexing and others do not. If it has duplexing, it should do it whether it is on a Mac or a PC. Make sure you have duplexing and the proper driver for your printer. If you are using a Gutenprint driver instead of the HP driver, you may not have duplexing available. If you click on Options & Supplies in Print & Fax, you will be able to see which driver you are using.

  • Which video camera works best with Premiere Pro CS6

    I'm a beginner in working with PP and need to purchase a video camera which will work seemlessly with Premiere Pro.  I don't want to go through a lot of conversion steps. I want to tape my kids sports, be able to take the raw video right from the camera to PP and begin editing, copying etc. Does the Canon HFM 500 with ABCHD formats provide what I need or do I need something more sophisticated?  Just getting started with the whole video editing thing and want to make the right choices before buying a camera. Thanks for any input.

    This message has a really good graphic about requirements
    - http://forums.adobe.com/thread/810750
    More about Requirements http://forums.adobe.com/thread/618058
    Disk Configurations http://forums.adobe.com/thread/878419
    What I built for CS5 and the camera I use are in http://forums.adobe.com/thread/652694

  • Which NAS solution works best with Mac OS X?

    I´m currently running two Netgear Readynas NV+ in conjunction with my macbook pro for backing up my photography work, but is less than happy with how it performs in different ways. Would anyone recommend something else, known to function fine with apples products?

    Just about any current Synology Diskstation. Use one here with Terabytes on it. Has never failed in three years. Serves Mac, Win, Phones, and iPads just fine using SMB2, though supports AFS, and NFS too. Runs custom Linux with easy to use visual administration.

  • Which sound files WORK BEST with FCP 7?

    pretty much self explanatory... Mp4. Aiff,ACC, i could have the letters wrong, but in a nutshell what's best...thank you.
    Godspeed,
    Jerry
    www.JerryTrimble.com

    The best is whatever matches your Sequence settings; in most cases that would be AIFF, 48khz, 16 bit. FCP does NOT work natively with AAC or MP3 files. Both should be converted to AIFF prior to importing into FCP.
    All of this basic information is covered thoroughly in the User's Manual and Help Files.
    -DH

  • Which form would work best with a Filemaker database? PDF or HTML? and can we use a submit button to do this?

    We are looking at developing work forms for a project that will use a submit button to send the data from the form to a Filemaker database. My question is can this be done with a PDF or do we need to convert it to a HTML form?

    The architecture is not submit form - database, not exactly. It's submit form - web app - database. The crucial thing is the web app, perhaps one of CGI/PHP/ASP/others... FileMaker Pro seems a slightly unusual choice for a web back end, but there is a FileMaker Pro Server product. (Regular FileMaker is out of the question).
    So, you can have a web app which takes HTML format submits and updates a database. What about PDF?
    * PDF can submit the same format as HTML, so the same backend can work
    * PDF can submit other formats, FDF or XFDF. The web script could handle these.
    Frankly, if HTML is an option I'd go with HTML. There are many important compatibility issues with PDF forms, since so many browsers now do not use Adobe technology, and have their own. In these alternatives, form support goes from nonexistent to flaky, via badly broken.

  • What wireless microphone works best with ipad for recording videos

    I am wanting to purchase a wireless microphone for recording videos with my ipad version 8.2. Do anyone have a suggestion?

    Hi gentleone,
    You likely have polarized sunglasses. If you turn your iPad from portrait to landscape (or vice versa) you'll be able to see your screen. I've experienced that with my sunglasses... The workaround to rotate it 90 degrees works for me
    Hope this answers your question!
    ~Joe

  • Which Operating System works best with CS3?

    Just want your thoughts. Since I am having some minor
    compatibility issue with CS# and XP Home, I was told that the best
    way to rectify this is to upgrade to XP Pro SP2. I am wondering if
    it wouldn't be better to upgrade to Vista Home Premium SP1. What
    are your thoughts?

    You could always upgrade to a Mac. Sorry just had to through
    that in there.
    On the Windows side, as of right now, you will only be able
    to get XP Pro until June 30th. Support is slated to end around 2010
    I believe.
    Personally it depends on who you ask and what your computer
    is capable of. If your computer is fairly new and can upgrade to a
    maximum of 4 gigs (the limit set by a 32-bit OS) I would say go for
    the Visa Home Premium 32-bit edition. If you are unsure of how much
    you can upgrade your computers memory check out www.crucial.com and
    use the memory finder tool. It will install an application and tell
    you the current and maximum memory configuration allowed for your
    machine.
    If your computer is older and cannot upgrade that far I would
    say go get an XP Pro upgrade before MS stops selling it.

Maybe you are looking for