Whicj log file locates the problem?

Everywhere on the Internet it states to check your log file to see what causes any problems (kernel errors, apps unexpectedly quiting, etc.) with the OS. The problem is there are so many log files; which do I need to review to find the problem?

Crash logs are located in ~/Library/Logs/CrashReporter and /Library/Logs/CrashReporter. They are best viewed via the Console.app. Launch it, select File->Open Quickly, and navigate to each one. Additionally, review the Console and System logs for other pertinent information, using the Console.app.

Similar Messages

  • Cannot shrink log file 2 because the logical log file located at the end of the file is in use ?

    HI,
    I am getting this error frequently.. any recomendations :
    Executed as user: DB0\sqlservices. Processing database: dbin [SQLSTATE 01000] (Message 0) 
    Cannot shrink log file 2 (DB_log) because the logical log file located at the end of the file is in use. [SQLSTATE 01000] (Message 9008) 
    Processing database: DB_ [SQLSTATE 01000] (Message 0)  DBCC execution completed. If DBCC printed error messages, contact your system administrator. [SQLSTATE 01000] (Message 2528) 
    Cannot shrink log file 2 (DB_log) because the logical log file located at the end of the file is in use. [SQLSTATE 01000] (Message 9008) 
    Processing database: DB [SQLSTATE 01000] (Message 0) 
    DBCC execution completed. If DBCC printed error messages, contact your system administrator. [SQLSTATE 01000] (Message 2528) 
    Backup, file manipulation operations (such as ALTER DATABASE ADD FILE) and encryption changes on a database must be serialized. Reissue the statement after the current backup or file manipulation operation is completed. [SQLSTATE 42000] (Error 3023) 
    Processing database: DB_AC [SQLSTATE 01000] (Error 0)  
    [SQLSTATE 01000] (Error 0)  DBCC execution completed. If DBCC printed error messages, contact your system administrator. [SQLSTATE 01000] (Error 2528). 
    The step failed.
    Please give any receomendations to avoid this error in future :
    Yangamuni Prasad M

     
    Hi Yangamuni,
    Are there any progress?
    Please have a look on the below threads with the similar issues as yours:
    http://www.sqlservercentral.com/Forums/Topic652579-146-1.aspx
    http://social.msdn.microsoft.com/forums/en-US/sqldatabaseengine/thread/ae4db890-c15e-44de-a2af-e85c04260331
    The solution is change the recovery mode to SIMPLE, shrink log files and then change to the FULL recovery mode.
    Thanks,
    Weilin Qiao
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

  • I get the following error: Error log file location: /Library/Logs/Adobe/Installers

    I get the error U44M1P7 Error log file location: /Library/Logs/Adobe/Installers
    Does anyone have an idea what I need to do?  Thanks

    Did you ever find a solution? I am in sort of the same boat. I even had an Adobe rep try to help me. For some reason my Adobe App Manager does not work on my Macbook. It orginally did but one day it just would not launch. After numerous attempts of uninstalling and re-installing without success, the only workaround solution was to create another user on my Macbook and install the Application Manager on that user's account. I can then download the apps / programs and updates from there. When I log out of that user and back into my main account the Adobe programs work....well most of them. I have noticed that certain programs, like Muse will launch and work correctly under my second user account but it will not luanch without error on the main account.
    The fact that no one at Adobe seems to be able to provide a solution is frustraing. Everything worked fine one day, then its all messed up. Switching users is not an ideal solution at all.

  • I get ERROR U44M1P7: Error log file location: C:\Program Files (x86)\Common Files\Adobe\Installers

    When updating Photoshop CS6 (Creative Cloud) I get ERROR U44M1P7: Error log file location: C:\Program Files (x86)\Common Files\Adobe\Installers. Initial Installation and actual funcioning wuith no problem, only on updating. I have tried several times with same error.

    Hi Alberto Pomares,
    Please refer the KB Doc : http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

    Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
    Sequence of events:
    The main error message is always:
    An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
    Yesterday, I opened Disk Utility and verified the disk. Got this error:
    Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
    I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
    Starting manual backup
    Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
    Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
    Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
    Deep event scan at path:/ reason:must scan subdirs|new event db|
    Finished scan
    Found 145601 files (11.88 GB) needing backup
    16.1 GB required (including padding), 620.77 GB available
    Copied Zero KB of 11.88 GB, 0 of 145601 items
    Copied 0 files (Zero KB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
    Ejected Time Machine network volume.
    Starting automatic backup
    Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
    Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
    Does anyone know what the problem is here and what I should do?
    Thanks,
    Tery

    You have repaired your boot drive (which is good) but have you repaired your time machine drive?  I don't own a Time Capsule so I don't know if disk utility can operate on it.  If it can, you should repair it as well.  You may need to erase it and start a new backup.  That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

  • Where to keep the log file and the mdf/ndf

    Hi ,
    While going through the book of Kalen Delaney "inside sql server"  I got statement  "A general recommendation is to put log files onto their own physical disk. Here I am bit confuse that we have to keep log file in same hard
    disk separate derive or in separate hard disk itself. On My DB server has only one hard disk, with three logical partition, so if I keep my log file MDF on different derives will I get the performance.
    Thanks in advance for reply........
    Regards Vikas Pathak

    @sateesh : but as per link "http://msdn.microsoft.com/en-us/library/bb402876.aspx"
    This rule checks whether data and log files are placed on separate logical drives. Placing both data and log files on the same device can cause contention for that device and result in poor performance. Placing the files on separate drives allows the I/O activity
    to occur at the same time for both the data and log files.
    This is probably as this is the best they can do. Checking that the logical drives are actually two different physical disks is little out of scope from what you can do in SQL Server.
    It is also worth pointing that the rule specifically refers to spinning disks. SSD disks do not have this problem.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Can FTP-access to field point log file interrupt the running program?

    Can FTP-access to field point log file interrupt the running program?
    We have a problem where our factory process control program on a Field Pointer suddenly stops the process. We are running the development system on a PC, wich deploys the program on the Field point, with user interface on the PC. Quite often the process stops for no apparent reason. I'm not sure right now if the control program on the Field Point is still running or if it stops. We use FTP from a distant PC (over VPN) directly to the Field Point to check if the process is running, by looking for date and size of log files produced during running process. I've never opened och copied any log file during process run, because this I'm sure this would cause problems for new log entries to be written. But can the mere looking at the log folder via XP-pros ftp-functionality cause the Field Point to have problems writing data to a log file?
    I'm not sure how windows XP pro handles "my network places" when it comes to FTP, it look that it keeps some kind of local copy of the folders, or at least the files opened.
    Next version of the program will have only basic functionality on the Field Point, leaving logging etc. to another program on the PC, but right now we are stuck with this system.
    Ola A

    It turned out that the problem lies in the harware of the production machine, it was not a labiew-program problem at all!
    Ola

  • Message in alert log file during the startup of the DB

    Hi,
    i have two instances, i have the same warning in the alert log file during the startup of the DB:
    Oracle instance running on a system with low open file descriptor limit.
    Tune your system to increase this limit to avoid severe performance degradation.
    The db_files parameter was at 1024 for the two instances, i have set it to 300 for the first instance and 550 for second, the message for the first instance was droped(it's ok), but the message was there in the alert log for the second instance.
    The two instance are on the same machine.
    The number of the open file limit on the linux machine is equal to 1024.
    I have shutdown the first instance (with db_files=300) the problem persits for the second instance (with db_files=550).
    My question is how to determinate the right value of db_files parameter to avoid this message.
    Regards.
    Message was edited by:
    learn

    Increase the max number of open file on Linux or decrease db_files.
    f the OS limit is 1024 db_files would have to be >= 472 for the message to be printed. t is printed if an instance is configured to access more datafiles than the OS-specific limit on the number of files that can be open in a single process. In this case the server will re-cycle the file descriptors.
    Vadim Bobrov
    Oracle Database Tools
    http://www.fourthelephant.com

  • Log file location settings

    Is it possible to change the log file locations, both master log file (from hyperion_home\essbase\essbase.log) and individual application log files (from their respective applicaiton folders), to some completely different locations. If yes, then what are the files that need to be configured or what settings need to be done for that. Thanks a lot...

    I like the idea, but I don't believe there are any settings for this (unless they are undocumented, and I doubt it).Perhaps you could do something in the O.S. to cause a replication or redirection to occur. Seems feasible, at least.

  • Log file location

    I would like to change the log file location for the Weblogic.log,
    access.log and jdbc.log. I tried setting the last two in the properties
    file but WL didn't seem to take them. Do I have to use the double back
    slash stuff? and what about the weblogic.log?
    Thanks
    - Tom

    Hi,
    look at this class:
    java.util.logging.FileHandler and study the pattern. This allows you to change the log file location.
    L.P.

  • Ttcwerrors.log and ttcwmesg.log file locations

    Is there an option we can set in the ttcrsagent.options file to change the location of the ttcwerrors.log and ttcwmesg.log files?
    We can change the location of the daemon user and error log files by setting the -supportlog and -userlog options in ttendaemon.options, so we were hoping we could do the same in ttcrsagent.options.
    Thanks,
    -Jules

    Unfortunately, no. The ttcw log file location is not configurable
    Simon

  • OSB log file location

    OSB log file location
    Where can I see the OSB logs if I use Report -> log action?
    Can somebody give me the name and location of the log file?

    Figured this out. It writes to weblogic admin server log:
    eg:
    C:\bea\user_projects\domains\ServiceBusTutorial\servers\AdminServer\logs\ServiceBusTutorial.log

  • Oracle 8 ver 8.1.7 log file location

    Dear all
    Do you know where is the Oracle log file location in OpenVMS platform? Please advice. Thanks

    8i is no longer available to download, it is only available at the oracle intranet under explicit request. I advise you to ask your Oracle representative for a copy of 8i. Here in the forum I suggest you to post a new thread at the download forum, and let people there know you want to have 8i for downloading at otn.
    I have seen several, certainly a lot of requests of 8i media, here in the forum, but not on the download section. I encourage you to let people who is monitoring this site to let them know your request.
    Download forum: Downloads Issues
    ~ Madrid.

  • Ultiboard log file location

    Ultiboard log file for back annotation - after installing 10.1 I copied my projects from the "My Documents\National Instruments\Circuit Design Suite 10.0" to
    "My Documents\National Instruments\Circuit Design Suite 10.1".  So far so good, but the log file still appears to be written to the old location.
    How do I get it to write the log to the new location?   The path settings in Ultiboard are pointing at the new location!
    I managed to work out how to relocate the user database ...
    Thanks
    Dave

    Hi Dave,
    I don't know of a setting that'll allow you to point the log file to another path, Ultiboard always put the log file in the same path as your project.
    Tien P.
    National Instruments

  • Log file location for FC 3510

    Does somebody know whats the default log file location for a FC3510 connected to solaris 8 machine?
    thanks.

    You need to enable specific logger for the same:
    http://identityandaccessmanager.blogspot.com/2011/02/setting-up-log-level-in-oim-11g.html
    Loggers:
    oracle.iam.request
    oracle.iam.requestactions

Maybe you are looking for

  • If I use a family member's upgrade in the family plan, will they lose their unlimited data?

    Hi there. So since my birthday is next week, and I'm on a family plan with my parents and 2 brothers, they're letting me use someone's upgrade to get the iPhone 5 since my upgrade isn't due until November. The upgrade that's available now is my older

  • EA3500 in bridge/repeater mode - can't get it working!

    Hi all, I have a EA3500 as my primary wireless router. I have cable service and my EA3500's WAN port is connected to my cable modem. I have a few devices (NAS, etc) connected to LAN ports via Ethernet and other devices that connect wirelessly. With t

  • ZipEntry with special characters

    Hi folks, I wrote a little servlet that lets you choose some files from the server and then you can download them all packed in one zip file. It works perfectly if the filenames contain no special characters, but if the filename contains german Umlau

  • Issues with New PFCG role

    Hi Experts, I have created a new Business role ZBP_MKT_MAN and PFCG role ZSAP_CRM_UIU_MKT_PROFESSIONAL. However the authorisations are not getting copied from SAP_CRM_UIU_MKT_PROFESSIONAL to ZSAP_CRM_UIU_MKT_PROFESSIONAL properly. Can someone guide m

  • Copy not allowed..only link.  Bug?

    I am following the Java Studio Creator Field Guide book, and in it, you are told to select the Copy radio button (as opposed to Link) when setting a URL for an image. Well, on my setup, copy is greyed out (disabled). Is this a bug, or is there someth