Whiet Space in FCC

Hi
In my output file after FCC , for a particular record i am getting white spaces before certain fields, which are not coming as part of the data.
What could be creating the white spaces?
regards
krishna

Hi Krishna !
First of all, are you sure that those spaces are not coming as part of the source data? take in account that messages in sxmb_moni, using that screen interface renders xml data trimming spaces..you should export that xml message file from sxmb_moni to your local workstation and check the real content with a text editor.
When you say that you are getting white spaces before certain fields..are you using a field delimiter or fields are delimited by length? what is the current output and what should be the expected one? could you give me an example?...one or two lines will do it.
Thanks,
Regards,
Matias.

Similar Messages

How to handle preceding space characters in file to file(FCC on both sides)

Hi All,
We have scenario with file to file (FCC on both sides).
Issue is: Sender side we are converting source file (CSV) into XML. But while converting it is ignoring preceding spaces.
Example:
Suppose Source file(CSV) contains one record as mentioned below ( for ur understanding purpose I mentioned 'X' instead of space. )
XXXXXXXXXX12345 78945 23548 23446
The above record is getting converted into XML as
<text>12345 78945 23548 23446</text>
But we need the record to be converted into XML as mentioned below
<text>XXXXXXXXXX12345 78945 23548 23446</text>
i.e we need spaces before "12345" also.
As both sender and receiver having same structure, we are not using any mapping also.
Please suggest in this regard.
Thanks & Regards,
Nagaraju

Hi,
In your sender content conversion use the parameter:
NameA.fieldContentFormatting nothing
For further ref:
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
Regards,
Manjusha

How to handle space in incoming file during fcc

Hi all,
I have a scenario of file to proxy. In this case the incomming file is space delimited and it begins with space too i.e. every new line item has a space in the begining I have to remove that space. How can i handle it...please help.
The fcc I am using is mentioned below:
Record.fieldSeparator '0x32'
Record.fieldNames a,b,c,d
Record.endSeparator 'nl'
Record.additionalLastFields ignore
ignoreRecordsetName true.
Thanks
Shivangi

This is my input payload
<?xml version="1.0" encoding="utf-8" ?>
- <ns:BRItemPrice_MT xmlns:ns="urn:test">
- <Record>
<VendNum>888700 0611593 0046.0800 00000838081 00014</VendNum>
<CCITEM>0033861</CCITEM>
</Record>
- <Record>
<VendNum>888700 0611597 0048.0000 00000838084 00014</VendNum>
<CCITEM>0033869</CCITEM>
</Record>
- <Record>
<VendNum>888700 0611599 0046.0800 00000838085 00014</VendNum>
<CCITEM>0033887</CCITEM>
</Record>
</nstest_MT>
And the fcc iI'm using is as below:
Record.fieldSeparator '0x32'
Record.fieldNames VendNum,CCITEM,CCCOST,HSITM,UPC
Record.beginSeparator '0x32'
Record.endSeparator 'nl'
Record.additionalLastFields ignore
ignoreRecordsetName true
Please help.
Thanks

Field names with spaces in target file using fcc

Hello Friends,
My target structure fields:
MT_Target
ItemNo, ItemName, ItemQuantity, AmountValue, TotalAmount
My requirement here is - In the target file - these fields should be generated with space. Shown as below:
Item No, Item Name, Item Quantity, Amount Value, Total Amount
How can i achieve this.
Thanx
S.

if i understood u correctly u want to have a header line in ut target file same as that ur field names but with a space in between??
if yes the use :
NameA.addHeaderLine=3
NameA.headerLine =Item No, Item Name, Item Quantity, Amount Value, Total Amount
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm

Receiver FCC parameter to preserve spaces

Hi Gurus,
Our scenario is using Outbound (IDoc to Fixed Field Length Flat File) and we are using File Content Conversion
However upon testing, the spaces are not being preserved in the flat file. We tried to map fields with Constant number of spaces (e.g. 5 char field mapped with Constant having value 5 spaces) but it is not working, space is still not preserved in the flat file generated.
For those that have encountered this scenario, what did you do with this issue? As i've said the scenario is fixed field length flat file so the field lengths still have to be in the flat file even if the field has no value
Hoping for your kind response

Hi,
It may happen that the spaces are coming and u cannot see in the editor.
Goto SXMB_MONI of PI system and check the payload after mapping(Target Payload).
Right click on the payload and open it... then see if spaces are coming in the payload or not
Babu

Disk space used much larger than actual files

I noticed this morning that Terminal was giving a warning about running out of swap space, which I thought was odd, as /var/vm was only at around ~10GB, but later when I tried to install some updates, I noticed that it said I only had 1.8MB free on my hard drive. I ran a df -h and it showed %iused at 100%. I immediately deleted some logs to free up a few megabytes of space and started hunting for what could have been hogging all my disk space, I seem to remember having 60GB free last time I checked. I was deleting a few small files, when I noticed this
bash-4.2# du -h -d 1
6.2M ./.DocumentRevisions-V100
584K ./.fseventsd
583M ./.Spotlight-V100
0B ./.Trashes
31G ./Applications
2.1M ./bin
20K ./cache
3.8G ./data
5.0K ./dev
34M ./Developer
1.3M ./EFI
1.0K ./home
8.9G ./Library
1.0K ./net
0B ./Network
185M ./opt
12G ./private
1.5M ./sbin
0B ./Shared Items
4.1G ./System
52G ./Users
4.9G ./usr
4.0K ./Volumes
117G
So apparently, according to du, I am only using 117GB of my hard drive. I immediately ran this
bash-4.2# df -h
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/disk1 297Gi 283Gi 14Gi 96% 74220526 3630455 95% /
devfs 200Ki 200Ki 0Bi 100% 692 0 100% /dev
map -hosts 0Bi 0Bi 0Bi 100% 0 0 100% /net
map auto_home 0Bi 0Bi 0Bi 100% 0 0 100% /home
So my question is how is it that all of my files combined are using 117GB, including swap, but according to df, Disk Utility and Finder I am using 283GB? I am using FileVault 2, if that helps
Here's some more data
bash-4.2# diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 31DE1089-1F50-45A1-81C8-D42D61DB2EAC
 =========================================================
 Name: Internal Hard Drive
 Status: Online
 Size: 319213174784 B (319.2 GB)
 Free Space: 16777216 B (16.8 MB)
 |
 +-< Physical Volume B22747BA-EF78-4BB2-A2ED-57A8A3C39C5E
 | ----------------------------------------------------
 | Index: 0
 | Disk: disk0s2
 | Status: Online
 | Size: 319213174784 B (319.2 GB)
 |
 +-> Logical Volume Family 80EF550B-053A-4DAF-8CC0-45D832CA8865
 Encryption Status: Unlocked
 Encryption Type: AES-XTS
 Conversion Status: Complete
 Conversion Direction: -none-
 Has Encrypted Extents: Yes
 Fully Secure: Yes
 Passphrase Required: Yes
 |
 +-> Logical Volume 43CA4685-144B-450C-A2AD-30643D38D310
 Disk: disk1
 Status: Online
 Size (Total): 318877626368 B (318.9 GB)
 Size (Converted): -none-
 Revertible: Yes (unlock and decryption required)
 LV Name: Internal Hard Drive
 Volume Name: Internal Hard Drive
 Content Hint: Apple_HFS
Also, according to Activity Monitor I have 804MB of RAM free, but my VM size is 430GB. It also says Swap Used: 2.85GB, however /private/var/vm is at 8GB.
System profile is here:
Audio:
 Intel High Definition Audio:
 Audio ID: 31
 Headphone:
 Connection: Combination Output
 Speaker:
 Connection: Internal
 Line Input:
 Connection: Combination Input
 Internal Microphone:
 Connection: Internal
 S/PDIF Optical Digital Audio Output:
 Connection: Combination Output
 External Microphone / iPhone Headset:
 Connection: Combination Output
 HDMI / DisplayPort Output:
 Connection: Display
 Devices:
 AirPlay:
 Manufacturer: Apple Inc.
 Output Channels: 2
 Current SampleRate: 44100
 Transport: AirPlay
 Built-in Input:
 Default Input Device: Yes
 Input Channels: 2
 Manufacturer: Apple Inc.
 Current SampleRate: 44100
 Transport: Built-in
 Built-in Output:
 Default Output Device: Yes
 Default System Output Device: Yes
 Manufacturer: Apple Inc.
 Output Channels: 2
 Current SampleRate: 44100
 Transport: Built-in
 Soundflower (2ch):
 Input Channels: 2
 Manufacturer: ma++ ingalls for Cycling '74
 Output Channels: 2
 Current SampleRate: 44100
 Transport: Unknown
 Soundflower (64ch):
 Input Channels: 64
 Manufacturer: ma++ ingalls for Cycling '74
 Output Channels: 64
 Current SampleRate: 44100
 Transport: Unknown
 After Effects 10.0:
 Manufacturer: Apple, Inc.
 Current SampleRate: 0
 Transport: Unknown
 AirParrot:
 Input Channels: 2
 Manufacturer: squirrels
 Output Channels: 2
 Current SampleRate: 44100
 Transport: Unknown
Bluetooth:
 Apple Bluetooth Software Version: 4.1.4f2 12041
 Hardware Settings:
 Address: C8-BC-C8-F0-BC-A5
 Manufacturer: Broadcom
 Name: niles-macbook
 Firmware Version: v41 c822
 Bluetooth Power: On
 Discoverable: Off
 Vendor ID: 0x5ac
 Product ID: 0x8218
 Services:
 Bluetooth File Transfer:
 Folder other devices can browse: ~/Public
 State: Enabled
 Bluetooth File Exchange:
 Folder for accepted items: ~/Downloads
 When other items are accepted: Ask
 When receiving items: Prompt for each file
 State: Enabled
 Devices (Paired, Favorites, etc):
 mouse:
 Address: d4-9a-20-81-10-c2
 Type: Mouse
 Firmware Version: 0x84
 Services: Apple Wireless Mouse
 Paired: Yes
 Favorite: No
 Connected: Yes
 Manufacturer: Apple (0x3, 0x31c)
 Vendor ID: 0x5ac
 Product ID: 0x30d
 EDR Supported: No
 eSCO Supported: No
 Incoming Serial Ports:
 Bluetooth-PDA-Sync:
 RFCOMM Channel: 3
 Requires Authentication: No
 Outgoing Serial Ports:
 Bluetooth-Modem:
 Address:
 RFCOMM Channel: 0
 Requires Authentication: No
Diagnostics:
 Power On Self-Test:
 Last Run: 9/4/13 5:28 PM
 Result: Passed
Disc Burning:
 HL-DT-ST DVDRW GS23N:
 Firmware Revision: SB10
 Interconnect: ATAPI
 Burn Support: Yes (Apple Shipping Drive)
 Cache: 2048 KB
 Reads DVD: Yes
 CD-Write: -R, -RW
 DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
 Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
 Media: To show the available burn speeds, insert a disc and choose File > Refresh Information
Ethernet Cards:
 ethernet:
 Type: Ethernet Controller
 Bus: PCI
 Vendor ID: 0x10de
 Device ID: 0x0d7d
 Subsystem Vendor ID: 0x106b
 Subsystem ID: 0xcb89
 Revision ID: 0x00a1
 BSD name: en0
 Kext name: nvenet.kext
 Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/nvenet.kext
 Version: 2.0.19
Firewall:
 Firewall Settings:
 Mode: Allow all incoming connections
 Firewall Logging: Yes
 Stealth Mode: Yes
Graphics/Displays:
 NVIDIA GeForce 320M:
 Chipset Model: NVIDIA GeForce 320M
 Type: GPU
 Bus: PCI
 VRAM (Total): 256 MB
 Vendor: NVIDIA (0x10de)
 Device ID: 0x08a0
 Revision ID: 0x00a2
 ROM Revision: 3533
 Displays:
 Color LCD:
 Display Type: LCD
 Resolution: 1280 x 800
 Pixel Depth: 32-Bit Color (ARGB8888)
 Main Display: Yes
 Mirror: Off
 Online: Yes
 Built-In: Yes
Hardware:
 Hardware Overview:
 Model Name: MacBook
 Model Identifier: MacBook7,1
 Processor Name: Intel Core 2 Duo
 Processor Speed: 2.4 GHz
 Number of Processors: 1
 Total Number of Cores: 2
 L2 Cache: 3 MB
 Memory: 4 GB
 Bus Speed: 1.07 GHz
 Boot ROM Version: MB71.0039.B0E
 SMC Version (system): 1.60f6
 Serial Number (system): 4505005NGP6
 Hardware UUID: 147BC83C-F831-52F6-976D-66749236DA55
 Sudden Motion Sensor:
 State: Enabled
Locations:
 Automatic:
 Active Location: Yes
 Services:
 Wi-Fi:
 Type: IEEE80211
 BSD Device Name: en1
 Hardware (MAC) Address: c8:bc:c8:f0:d8:32
 IPv4:
 Configuration Method: DHCP
 IPv6:
 Configuration Method: Automatic
 Proxies:
 Exceptions List: *.local, 169.254/16, 192.168/16
 FTP Passive Mode: Yes
 HTTP Proxy Enabled: No
 HTTP Proxy Port: 6515
 HTTP Proxy Server: 68.37.6.66
 SOCKS Proxy Enabled: No
 SOCKS Proxy Port: 9999
 SOCKS Proxy Server: localhost
 IEEE80211:
 PowerEnabled: 1
 RememberJoinedNetworks: 1
 RequireAdminIBSS: 0
 RequireAdminNetworkChange: 0
 RequireAdminPowerToggle: 0
 SMB:
 NetBIOSName: niles-macbook
 Ethernet:
 Type: Ethernet
 BSD Device Name: en0
 Hardware (MAC) Address: dc:2b:61:fc:1c:ec
 IPv4:
 Configuration Method: DHCP
 IPv6:
 Configuration Method: Automatic
 DNS:
 Server Addresses: 127.0.0.1
 Proxies:
 Exceptions List: *.local, 169.254/16
 FTP Passive Mode: Yes
 SMB:
 NetBIOSName: niles-macbook
 VPN (PPTP):
 Type: PPP
 IPv4:
 Configuration Method: PPP
 IPv6:
 Configuration Method: Automatic
 Proxies:
 FTP Passive Mode: Yes
 PPP:
 ACSP Enabled: Yes
 Authorization Name: vpnbook
 Authorization Password: A6935819-8F9B-4A32-A9E6-B7B3B69CAA86
 Authorization Password Encryption: KeyChain
 CCP Enabled: 1
 CCP MPPE 128 Enabled: 1
 CCP MPPE 40 Enabled: 1
 Display Terminal Window: No
 Redial Count: 1
 Redial Enabled: No
 Redial Interval: 5
 Remote Address: euro195.vpnbook.com
 Use Terminal Script: No
 Dial on Demand: No
 Disconnect on Fast User Switch: No
 Disconnect on Idle: No
 Disconnect on Idle Timer: 600
 Disconnect on Logout: No
 Disconnect on Sleep: No
 Idle Reminder: No
 Idle Reminder Time: 1800
 IPCP Compression VJ: No
 LCP Echo Enabled: Yes
 LCP Echo Failure: 15
 LCP Echo Interval: 20
 Log File: /var/log/ppp.log
 Verbose Logging: Yes
 SMB:
 NetBIOSName: niles-macbook
 Bluetooth DUN:
 Type: PPP
 IPv4:
 Configuration Method: PPP
 IPv6:
 Configuration Method: Automatic
 Proxies:
 FTP Passive Mode: Yes
 PPP:
 ACSP Enabled: No
 Display Terminal Window: No
 Redial Count: 1
 Redial Enabled: Yes
 Redial Interval: 5
 Use Terminal Script: No
 Dial on Demand: No
 Disconnect on Fast User Switch: Yes
 Disconnect on Idle: Yes
 Disconnect on Idle Timer: 600
 Disconnect on Logout: Yes
 Disconnect on Sleep: Yes
 Idle Reminder: No
 Idle Reminder Time: 1800
 IPCP Compression VJ: Yes
 LCP Echo Enabled: No
 LCP Echo Failure: 4
 LCP Echo Interval: 10
 Log File: /var/log/ppp.log
 Verbose Logging: No
 SMB:
 NetBIOSName: niles-macbook
Memory:
 Memory Slots:
 ECC: Disabled
 BANK 0/DIMM0:
 Size: 2 GB
 Type: DDR3
 Speed: 1067 MHz
 Status: OK
 Manufacturer: 0x80AD
 Part Number: 0x484D54313235533654465238432D47372020
 Serial Number: 0x0973B606
 BANK 1/DIMM0:
 Size: 2 GB
 Type: DDR3
 Speed: 1067 MHz
 Status: OK
 Manufacturer: 0x80AD
 Part Number: 0x484D54313235533654465238432D47372020
 Serial Number: 0x0933B66D
Network:
 AirPort:
 Type: AirPort
 Hardware: AirPort
 BSD Device Name: en1
 Has IP Assigned: Yes
 IPv4 Addresses: 192.168.1.5
 IPv4:
 Addresses: 192.168.1.5
 ARPResolvedHardwareAddress: 00:26:b8:5d:6b:ed
 ARPResolvedIPAddress: 192.168.1.1
 Configuration Method: DHCP
 Interface Name: en1
 Network Signature: IPv4.Router=192.168.1.1;IPv4.RouterHardwareAddress=00:26:b8:5d:6b:ed
 Router: 192.168.1.1
 Subnet Masks: 255.255.255.0
 IPv6:
 Configuration Method: Automatic
 DNS:
 Domain Name: homenetwork.internal
 Server Addresses: 192.168.1.1
 DHCP Server Responses:
 Domain Name: homenetwork.internal
 Domain Name Servers: 192.168.1.1
 Lease Duration (seconds): 0
 DHCP Message Type: 0x05
 Routers: 192.168.1.1
 Server Identifier: 192.168.1.1
 Subnet Mask: 255.255.255.0
 Ethernet:
 MAC Address: c8:bc:c8:f0:d8:32
 Media Options:
 Media Subtype: Auto Select
 Proxies:
 Exceptions List: *.local, 169.254/16, 192.168/16
 FTP Passive Mode: Yes
 HTTP Proxy Enabled: No
 HTTP Proxy Port: 6515
 HTTP Proxy Server: 68.37.6.66
 SOCKS Proxy Enabled: No
 SOCKS Proxy Port: 9999
 SOCKS Proxy Server: localhost
 Sleep Proxies:
 1 Printer 1:
 Marginal Power: 60
 Metric: 703560
 Portability: 35
 Total Power: 63
 Type: 70
 Service Order: 0
 Ethernet:
 Type: Ethernet
 Hardware: Ethernet
 BSD Device Name: en0
 Has IP Assigned: No
 IPv4:
 Configuration Method: DHCP
 IPv6:
 Configuration Method: Automatic
 DNS:
 Server Addresses: 127.0.0.1
 Ethernet:
 MAC Address: dc:2b:61:fc:1c:ec
 Media Options:
 Media Subtype: Auto Select
 Proxies:
 Exceptions List: *.local, 169.254/16
 FTP Passive Mode: Yes
 Service Order: 1
 VPN (PPTP):
 Type: PPP (PPTP)
 BSD Device Name: ppp0
 Has IP Assigned: Yes
 IPv4 Addresses: 172.16.36.248
 IPv4:
 Addresses: 172.16.36.248
 Configuration Method: PPP
 Destination Addresses: 172.16.36.1
 Interface Name: ppp0
 Network Signature: VPN.RemoteAddress=euro195.vpnbook.com
 Router: 172.16.36.1
 ServerAddress: 93.115.84.195
 IPv6:
 Configuration Method: Automatic
 DNS:
 Server Addresses: 195.60.76.114, 195.60.76.115
 Supplemental Match Domains:
 Supplemental Match Orders: 100000
 Proxies:
 FTP Passive Mode: Yes
 Supplemental Match Domains:
 Supplemental Match Orders: 100000
 Service Order: 2
 Bluetooth DUN:
 Type: PPP (PPPSerial)
 Hardware: Modem
 BSD Device Name: Bluetooth-Modem
 Has IP Assigned: No
 IPv4:
 Configuration Method: PPP
 IPv6:
 Configuration Method: Automatic
 Proxies:
 FTP Passive Mode: Yes
 Service Order: 3
Power:
 Battery Information:
 Model Information:
 Serial Number: W0043T3DRE1KB
 Manufacturer: SMP
 Device Name: bq20z451
 Pack Lot Code: 0
 PCB Lot Code: 0
 Firmware Version: 201
 Hardware Revision: 000a
 Cell Revision: 164
 Charge Information:
 Charge Remaining (mAh): 4995
 Fully Charged: Yes
 Charging: No
 Full Charge Capacity (mAh): 5137
 Health Information:
 Cycle Count: 97
 Condition: Normal
 Battery Installed: Yes
 Amperage (mA): -1105
 Voltage (mV): 12162
 System Power Settings:
 AC Power:
 System Sleep Timer (Minutes): 0
 Disk Sleep Timer (Minutes): 10
 Display Sleep Timer (Minutes): 1
 Wake on AC Change: No
 Wake on Clamshell Open: Yes
 Wake on LAN: Yes
 Current Power Source: Yes
 Display Sleep Uses Dim: Yes
 PrioritizeNetworkReachabilityOverSleep: 0
 Battery Power:
 System Sleep Timer (Minutes): 25
 Disk Sleep Timer (Minutes): 10
 Display Sleep Timer (Minutes): 1
 Wake on AC Change: No
 Wake on Clamshell Open: Yes
 Display Sleep Uses Dim: Yes
 Reduce Brightness: Yes
 Hardware Configuration:
 UPS Installed: No
 AC Charger Information:
 Connected: Yes
 ID: 0x0100
 Wattage (W): 60
 Revision: 0x0000
 Family: 0x0085
 Serial Number: 0x00fce157
 Charging: No
Printer Software:
 Printers:
 Printers:
 Path: /Library/Printers/Brother/Filter/commandtobrother.bundle/Contents/Info.plist
 Version: 1.0.5
 Path: /Library/Printers/Brother/Filter/rastertobrother145.bundle/Contents/Info.plist
 Version: 1.0.4
[Trimmed]
 Path: /Library/Printers/Samsung/PDEs/JobRetention.bundle/Contents/Info.plist
 Version: 1.05
 Path: /Library/Printers/Samsung/PDEs/JobSetting.bundle/Contents/Info.plist
 Version: 6.0
 Path: /Library/Printers/Samsung/PDEs/Output.bundle/Contents/Info.plist
 Version: 1.05
 Path: /Library/Printers/Samsung/PDEs/Printer.bundle/Contents/Info.plist
 Version: 1.05
 Image Capture Devices:
 Image Capture Devices:
 Path: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/Info.plist
 Version: 1.5.1
 Path: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/Resources/DeviceInfo.plist
 Version: 1.5.1
 Path: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/Resources/DeviceMatchingInfo.plist
[Trimmed]
 Path: /Library/Image Capture/Devices/HPScanner.app/Contents/Resources/DeviceMatchingInfo.plist
 Version: 1.9.2
 Image Capture Support:
 Image Capture Support:
 Path: /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Info.plist
 Version: 2.3.0
 Path: /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Resources/DeviceInfo.plist
 Version: 2.3.0
 Extensions:
 Extensions:
 Path: /System/Library/Extensions/AppleMobileDevice.kext
 Version: 3.3.0
 Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/AppleATAPIStorage.kext
 Version: 3.1.7
 Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/AppleXserveRAID.kext
 Version: 3.1.7
 Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/FireWireStorageDeviceSpecifics.kext
 Version: 3.1.7
 Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/SonyXDCAMDriver.kext
 Version: 3.1.7
 Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/USBStorageDeviceSpecifics.kext
 Version: 3.1.7
 Path: /System/Library/Extensions/AppleUSBTopCase.kext
 Version: 237.1
 Path: /System/Library/Extensions/BJUSBLoad.kext
 Version: 2.1.0
 Path: /System/Library/Extensions/CellPhoneHelper.kext
 Version: 1.2.6
 Path: /System/Library/Extensions/hp_fax_io.kext
 Version: 5.5.0
 Path: /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
 Version: 2.6.0
 Path: /System/Library/Extensions/hp_Inkjet3_io_enabler.kext
 Version: 3.3.0
 Path: /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDEventDriver.kext
 Version: 1.8.1
 Path: /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDEventDriverSafeBoot.kext
 Version: 1.8.1
 Path: /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDUserClient.kext
 Version: 1.8.1
 Path: /System/Library/Extensions/IOStreamFamily.kext/Contents/PlugIns/IOStreamUserClient.kext
 Version: 1.1.0
 Path: /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBHIDDriverSafeBoot.kext
 Version: 4.4.5
 Path: /System/Library/Extensions/IOVideoFamily.kext/Contents/PlugIns/IOVideoDeviceUserClient.kext
 Version: 1.2.0
Printers:
 Printer 1:
 Status: Idle
 Print Server: Local
 Driver Version: 1.0
 Default: Yes
 Shared: Yes
 URI: dnssd://Printer%201._ipp._tcp.local./
 PPD: HP Officejet Pro 8100-AirPrint
 PPD File Version: 1.0
 PostScript Version: (3010.000) 0
 CUPS Version: 1.6.2 (cups-327.6)
 Scanning support: No
 Printer Commands: none
 CUPS filters:
 image/urf processed in Printer:
 Fax support: No
 PDEs:
Serial-ATA:
 NVidia MCP89 AHCI:
 Vendor: NVidia
 Product: MCP89 AHCI
 Link Speed: 3 Gigabit
 Negotiated Link Speed: 1.5 Gigabit
 Description: AHCI Version 1.30 Supported
 TOSHIBA MK3255GSXF:
 Capacity: 320.07 GB (320,072,933,376 bytes)
 Model: TOSHIBA MK3255GSXF
 Revision: FH415B
 Serial Number: 90TFF00PS
 Native Command Queuing: Yes
 Queue Depth: 32
 Removable Media: No
 Detachable Drive: No
 BSD Name: disk0
 Rotational Rate: 5400
 Medium Type: Rotational
 Partition Map Type: GPT (GUID Partition Table)
 S.M.A.R.T. status: Verified
 Volumes:
 disk0s1:
 Capacity: 209.7 MB (209,715,200 bytes)
 BSD Name: disk0s1
 Content: EFI
 disk0s2:
 Capacity: 319.21 GB (319,213,174,784 bytes)
 BSD Name: disk0s2
 Content: Apple_CoreStorage
 Recovery HD:
 Capacity: 650 MB (650,002,432 bytes)
 File System: Journaled HFS+
 BSD Name: disk0s3
 Content: Apple_Boot
 Volume UUID: 9938BA16-8F0C-3D96-829A-2AF41E6A4C76
 NVidia MCP89 AHCI:
 Vendor: NVidia
 Product: MCP89 AHCI
 Link Speed: 3 Gigabit
 Negotiated Link Speed: 1.5 Gigabit
 Description: AHCI Version 1.30 Supported
 HL-DT-ST DVDRW GS23N:
 Model: HL-DT-ST DVDRW GS23N
 Revision: SB10
 Serial Number: KZ1A8TA3628
 Native Command Queuing: No
 Detachable Drive: No
 Power Off: Yes
 Async Notification: No
Software:
 System Software Overview:
 System Version: OS X 10.8.4 (12E55)
 Kernel Version: Darwin 12.4.0
 Boot Volume: Internal Hard Drive
 Boot Mode: Normal
 Computer Name: niles-macbook
 User Name: System Administrator (root)
 Secure Virtual Memory: Enabled
 Time since boot: 2 days 19:13
Storage:
 Internal Hard Drive:
 Available: 15.79 GB (15,792,230,400 bytes)
 Capacity: 318.88 GB (318,877,626,368 bytes)
 Mount Point: /
 File System: Journaled HFS+
 Writable: Yes
 Ignore Ownership: No
 BSD Name: disk1
 Volume UUID: 5A09BE44-23E3-301A-9831-E1C07F058FAB
 Logical Volume:
 Revertible: Yes (unlock and decryption required)
 Encrypted: Yes
 Encryption Type: AES-XTS
 Locked: No
 LV UUID: 43CA4685-144B-450C-A2AD-30643D38D310
 Logical Volume Group:
 Name: Internal Hard Drive
 Size: 319.21 GB (319,213,174,784 bytes)
 Free Space: 16.8 MB (16,777,216 bytes)
 LVG UUID: 31DE1089-1F50-45A1-81C8-D42D61DB2EAC
 Physical Volumes:
 disk0s2:
 Media Name: TOSHIBA MK3255GSXF Media
 Size: 319.21 GB (319,213,174,784 bytes)
 Medium Type: Rotational
 Protocol: SATA
 Internal: Yes
 Partition Map Type: GPT (GUID Partition Table)
 Status: Online
 S.M.A.R.T. Status: Verified
 PV UUID: B22747BA-EF78-4BB2-A2ED-57A8A3C39C5E
Thunderbolt:
 Thunderbolt: No hardware was found.
USB:
 USB Hi-Speed Bus:
 Host Controller Location: Built-in USB
 Host Controller Driver: AppleUSBEHCI
 PCI Device ID: 0x0d9d
 PCI Revision ID: 0x00a2
 PCI Vendor ID: 0x10de
 Bus Number: 0x24
 Built-in iSight:
 Product ID: 0x8507
 Vendor ID: 0x05ac (Apple Inc.)
 Version: 4.42
 Serial Number: 8JAC2190MDCJ5A00
 Speed: Up to 480 Mb/sec
 Manufacturer: Apple Inc.
 Location ID: 0x24600000 / 2
 Current Available (mA): 500
 Current Required (mA): 500
 USB Hi-Speed Bus:
 Host Controller Location: Built-in USB
 Host Controller Driver: AppleUSBEHCI
 PCI Device ID: 0x0d9d
 PCI Revision ID: 0x00a2
 PCI Vendor ID: 0x10de
 Bus Number: 0x26
 USB Bus:
 Host Controller Location: Built-in USB
 Host Controller Driver: AppleUSBOHCI
 PCI Device ID: 0x0d9c
 PCI Revision ID: 0x00a1
 PCI Vendor ID: 0x10de
 Bus Number: 0x04
 USB Bus:
 Host Controller Location: Built-in USB
 Host Controller Driver: AppleUSBOHCI
 PCI Device ID: 0x0d9c
 PCI Revision ID: 0x00a1
 PCI Vendor ID: 0x10de
 Bus Number: 0x06
 BRCM2070 Hub:
 Product ID: 0x4500
 Vendor ID: 0x0a5c (Broadcom Corp.)
 Version: 1.00
 Speed: Up to 12 Mb/sec
 Manufacturer: Apple Inc.
 Location ID: 0x06600000 / 3
 Current Available (mA): 500
 Current Required (mA): 94
 Bluetooth USB Host Controller:
 Product ID: 0x8218
 Vendor ID: 0x05ac (Apple Inc.)
 Version: 0.41
 Speed: Up to 12 Mb/sec
 Manufacturer: Apple Inc.
 Location ID: 0x06630000 / 6
 Current Available (mA): 500
 Current Required (mA): 0
 Apple Internal Keyboard / Trackpad:
 Product ID: 0x0236
 Vendor ID: 0x05ac (Apple Inc.)
 Version: 0.90
 Speed: Up to 12 Mb/sec
 Manufacturer: Apple Inc.
 Location ID: 0x06300000 / 2
 Current Available (mA): 500
 Current Required (mA): 40
Volumes:
 net:
 Type: autofs
 Mount Point: /net
 Mounted From: map -hosts
 Automounted: Yes
 home:
 Type: autofs
 Mount Point: /home
 Mounted From: map auto_home
 Automounted: Yes
Wi-Fi:
 Software Versions:
 CoreWLAN: 3.3 (330.15)
 CoreWLANKit: 2.0.2 (202.10)
 Menu Extra: 8.1 (810.9)
 configd plug-in: 8.4 (840.22.1)
 System Information: 8.3 (830.5)
 IO80211 Family: 5.3 (530.4)
 Diagnostics: 2.0 (200.24)
 AirPort Utility: 6.3.1 (631.4)
 Interfaces:
 en1:
 Card Type: AirPort Extreme (0x14E4, 0x93)
 Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.100.17)
 MAC Address: c8:bc:c8:f0:d8:32
 Locale: FCC
 Country Code: US
 Supported PHY Modes: 802.11 a/b/g/n
 Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
 Wake On Wireless: Supported
 AirDrop: Supported
 Status: Connected
 Current Network Information:
 XZ2PB:
 PHY Mode: 802.11g
 BSSID: 00:26:b8:5d:6b:f2
 Channel: 6
 Country Code: US
 Network Type: Infrastructure
 Security: WEP
 Signal / Noise: -58 dBm / -91 dBm
 Transmit Rate: 54

The 300GB partition is the partition I am booting off of, and the one I was writing about. Disk0s1 is the EFI partition, 210MB. The other Internal hard drive is the core storage physical volume, already mounted, mounted in the image. Recovery HD is the 650MB system recovery partition.
I rebooted to the recovery partition and used Disk Utility to verify the volume, it said everything checked out alright.
In disk utility, the top entry has this data
 Name : Internal Hard Drive Capacity : 319.21 GB (319,213,174,784 Bytes)
 Type : Logical Volume Group Available : 16.8 MB (16,777,216 Bytes)
 Disk Status : Online Used : 319.2 GB (319,196,397,568 Bytes)
However the other entry, right below it has this
 Mount Point : / Capacity : 318.88 GB (318,877,626,368 Bytes)
 Format : Encrypted Logical Partition Available : 202.18 GB (202,175,160,320 Bytes)
 Owners Enabled : Yes Used : 116.7 GB (116,702,466,048 Bytes)
 Number of Folders : 241,519 Number of Files : 1,246,454
So I guess the reboot fixed my problem, df -h now shows 37% used, but the logical vomume group still shows only 16MB free. Anyways, things seem to be working now.

Handling flat file conversion with spaces inbetween at sender side

Hi,
 I am facing some problem in configuring the sender JMS adapter file content conversion. Please find the structure of my file below
010AG 07/17/2007 000130800 TOZ07/17/200710:48:46
010AU 07/17/2007 006682800 TOZ07/17/200710:48:46
010-Record key
AG-Metal code
07/17/2007 -price Date
000130800 -pricevalue
TOZ-Unitofmessure
07/17/200710:48:46-Unitofmessure
there are 2spaces inbeween 1and 2nd fields and one space beween 2nd and 3rd ,one space between 3rd and 4th fileds
I declared my source data strucute like below
<source_MT>
<PriceData>
 <Metal code>
 <price Date>
 <pricevalue>
 <Unitofmessure>
 <shipDate>
</priceData>
</source_MT>
I am using this PDF to configure my serder communication channel https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b7
. but i got struck up in declaring these two fields as i need deal with spaces.
xml.NameA.fieldNames
xml.NameA.fieldFixedLengths
It would be great if sombody tell me how ican decalre content conversion rules for the file
Thanks
sudheer

Hi,
Please check some links on FCC.
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani

Error in sending file using FCC

Hi all,
i am doing the file content conversion scenario from saptechnicalcom
my message type is as follows:
MT_File_Cont_Conv
     Record
        Emp_Header
          Key
          Emp_Id
          Emp_Name
File is not picked up by the sender file adapter and in RWB communication channel monitoring i am getting the following error:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'Emp_Header.keyFieldValue': no value found
anybody plz provide me some input to rectify this error
regards
sandeep sharma

>
sandeep sharma wrote:
> hi
> FCC parameters are as follows
>
> Document Name:                    MT_File_Cont_Conv
> Recordset Name:                      Record
> Recordset Structure:                   Emp_Header,1
> Recordset sequence:                    Ascending
> Recordset per message:                 1
> Key Field Name:                         Key
>
>
>
>
> Emp_Header.fieldFixedLengths                   1,6,10
> Emp_Header.endSeparator          'nl'
> Emp_Header.fieldNames          Key,Emp_Id,Emp_Name
> Emp_Header.keyFieldValue                      1
> Emp_Header.keyFieldInStructure                 ignore
make sure there is no white space before or after
Emp_Header.keyFieldValue and also the value 1
Even a single whitespace can cause an issue

Sender File Adapter FCC Question

Hello folks!!
I am trying to configure a FCC for Sender file adapter and wanted to consider a Line feed Carriage return line which will look as below to be a empty tag in XML. After Line 4 there will be a blank line which identifies the start of next record. I tried using Field.MissingLastFields , Field.endSeparator etc., Perhaps I am not using the correct value. Any help appreciated.
Line1
Line2
Line3
Line4
Line1
The expected XML is as below:
<Record>Line1</Record>
<Record>Line2</Record>
<Record>Line3</Record>
<Record>Line4</Record>
<Record></Record>
<Record>Line1</Record>

Hi Greg
Thanks for your feedback. I tried and it didn't work. below is the FCC i have in sender adapter
RecordSetName = RecordSet
RecordSetStructure = Dummy,*
Dummy.fieldNames = Record
Dummy.endSeparator = 'nl'
Dummy.missingLastfields = add
Dummy.ignoreRecordsetName = true
Dummy.fieldSeparator = 'nl' and also I tried with Dummy.fieldFixedLengths = 255 .
Still I don't get the empty tag for the blank line in the file, so my output is still same . Please note the blank line doesn't have a space so if I place the cursor and move to next in blank line it will go to next line ( Carriage return and line feed).
Please suggest .

Unable to configure file adapter using FCC for Multilevel hierarchy

Hi Experts,
Can anyone help me in configuring the Receiver file adapter with FCC for the structure given below
<Root>
<Level1>
 <Ele1>
 <Ele2>
 <Level2>
 <Ele2_1>
 <Ele2_2>
 <Level2a>
 <Ele2a_1>
 <Ele2a_2>
 </Level2a>
 </Level2>
</Level1>

Hi dineshmale,
I have do this Multilevel hierarchy before. FCC can directly configure this scenario. But I don't know you output format. What my format shown below(here i use '#' instead of space):
Level1_Field1##Level1_Field2##Level1_Field3##Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
#######################################Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
Level1_Field1##Level1_Field2##Level1_Field3##Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
#######################################Level2_Field1##Level2_Field2##Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
#################################################################Level3_Field1##Level1_Field2
FCC Parameter:
Recordset Structure: Level1,Level2,Level3
Level1.fieldSeparator = (2 spaces)
Level2.beginSeparator = (some spaces according to the length of the fields in Level1)
Level2.fieldSeparator = (2 spaces)
Level3.beginSeparator = (some spaces according to the length of the fields in Level1and Level2)
Level3.fieldSeparator = (2 spaces)
Level3.endSeparator = \n
There are some points:
1. the endSeparator for Level1 and Level2 doesn't work.
2. the first begin separator in Level2 and Level3 doesn't work.
3. The last field of super node and the first field of child node is separated by the (child).fieldSeparator.
4. ....
What's more, I have write a blog of FCC For Hierarchical Structure in Receiver Channel just now. So it need two days for Approval. Let me know for any issues.
Edited by: guKidd on Dec 14, 2010 7:52 AM
Edited by: guKidd on Dec 14, 2010 7:54 AM

Re:Remove Recordset in FCC?

Hi All,
I am working on File to IDOC scenario where I am getting error in Sender File CC. I see the payload contains recordset where in my DT,MT I didnt mentioned any recordset in my strcuture:
DT is as below:
DT_DATA
--Row
Field1
Field2
In payload it shows as below:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Data xmlns:ns="http://sap.com/interface">
- <Recordset>
- <Row>
<Field1>ZOR</Field1>
<Field2>2030009716</Field2>
In my FCC I have the following parameters:
Document Name MT_DATA
Document Name Space http://sap.com/interface
Document Offset <BLANK>
Recordset Name <BLANK>
Recordset Namespace <BLANK>
Recordset Strcuture Row,*
Recordset Sequence Asending
Recordset per message <BLANK>
KeyFiledName <BLANK>
KeyFieldType <BLANK>
How can I get rid of <Recordset> tag in payload???
Thanks
Rajeev

I see the payload contains recordset where in my DT,MT I didnt mentioned any recordset in my strcuture:
How can I get rid of <Recordset> tag in payload???
If not seen already have a read of this help section:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/6713ec3f914ddee10000000a1553f7/content.htm
From the above section:
u25CB ignoreRecordsetName
A <Recordset> element is inserted in the XML structure for each recordset structure. This level is not always required, particularly
if the recordset only contains one structure definition.
If you set the parameter to true, the <Recordset> element is not inserted.
Regards,
Abhishek.

Tab Delimited File Using Receiver FCC

Hi Experts,
I need to generate a Tab Delimited File Using Receiver FCC. I have achieved the same by copying the tab length from a notepad and used the same in name.fieldSeparator parameter.
The other below mentioned values for name.fieldSeparator didnu2019t produce the expected result:
name.fieldSeparator=u2019htu2019
name.fieldSeparator=u2019\tu2019
name.fieldSeparator=u2019 0x09u2019
So just need to know if my approach for achieving this is fine or not.
Thanking you in advance.
Aditya.

Verma,
name.fieldSeparator=u2019 0x09u2019
I see a space after the first comma. Try removing it and give a try.
'0x09' with no spaces.
Regards,
---Satish

FCC:Receiver File Adapter

Hi
This is regarding a FCC in receiver File Adapter
My requirement is as follows :
I have the following source structure
DT_Source
Structure
Field 1
Field 2
Field 3
The target file to be created will contain all the 3 fields mapped directly from the source.
but in additional to these 3 fields it will also contain 3 constants ..which aren't coming from the source.
Do I need to include that in the Target data type and map them as constant values in the mapping or can the addition of constant values be taken care of in the File Content conversion ?
thanks
Dev

Thanks Shabarish
So you mean once i get a sample file , according to the blank spaces in the resultant i should have a corresponding field in my target Message type and map it toa constant white spaces ??
ok I have one last question
Can the FIle(on the receiver side ) be a mix of values which are fixed as well as variable lenghs ??
i.e
a typical line item in the file will be like this
Field1,Field2,Constant1,       ,Constant2,Field3,      ,Constant3,Field4,Constant4
where Field1 and Field3 are fixed length fields with the constants and field 4 and field5 are of variable lengths ????
thanks
Dev

Sender File with FCC coming with empty file

Hi Experts,
Scenario: File(FCC) to Proxy
Error: CSV file picking up from source directory but its showing empty in sender CC (Actual file contains data in source directory) and find below attached Conversion parameters. Please let me know if any changes in the configuration.
Document Name: MT_Legacy
Document Name space: http://retails.com/pi/LEGACY/Purchasing/TECHNICAL_DATA
Recordset structure: Header,,Items,
Recordset sequence: Ascending
Keyfiled names: NumFacture,Constant
ignoreRecordsetName----
true
Header.fieldNames----
a,s,d,f,g,e
Header.keyFieldInStructure----
ignore
Header.keyFieldValue----
05
Header.endSeparator----
nl
Header.fieldSeparator----
Similar to Items also
Query: is this error related to source file (unexpected format) or Sender File CC configuration.
Regards,
FHM

Hi HK,
I see that there are two keyfield names in your content conversion. Are they for different nodes?
" Keyfiled names: NumFacture,Constant "
Yes...those are coming from two different nodes like one from Header and another one from Items.
And also the you have provided key field value as 05 and what about the other key field?
Another key field value have given 43
one more thing Key filed value must be always constant right?
Thanks,

FCC parameters on reciever side

Hello,
I am doing IDOC-File scenario.
source IDOC strucutre is
DEBMAS06 which has the following strucuture
DEBMAS06
BEGIN
EDI_DC40
E1KNA1M
 <fields>
 custom_segment
 <fields>
I have reciever data type as ..
new_cust
Root
<fields>
<fields>
What are the FCC parameters I can use to get '|' delimted file on the destination file?
the field delimited with empty space shud be there even if there s no source data comign in
venkat.

Hi !
Please look thru this one too..
http://help.sap.com/saphelp_erp2005/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm
for idoc related settings in r/3 refer the below link...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
Check this:
http://****************/Tutorials/XI/IDocToFile/IDocToFile1.htm
See the below links to get the idea mapping
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
for more details about your scenarios 
For any IDOC scenario u can use the corresponding link below.
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi --> ALE configuration for pushing idocs from SAP to XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983331,00.html
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html---->serialization
/people/alessandro.guarneri/blog/2006/11/26/content-based-serialization-dynamic-queue-name-in-xi
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm ->IDOC Bundling
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters Idoc 2 file
Try to Use Idoc packaging. also see the below links
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm - collecting IDocs without BPM
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
Thanks !!!
Questions are welcome here!!
Also mark helpful answers by rewarding points 
Regards
Abhishek Agrahari

Whiet Space in FCC

Similar Messages

Maybe you are looking for