Whihc extraction types to follow for which type of data sources.

Hi,
I have gone through many extraction types like LO, Generic , COPA, LIS etc..
Can any one please help me in telling whihc extraction types to follow for which type of data sources.

what do you mean by extraction type? your question is not clear.
if you are looking for weather we can use the full/delta type to extract the data
then you can check in the Check in ROOSOURCE tables in ECC. You can find the various options in DELTA field.

Similar Messages

Logical System Name is defined for which type of Business Sytem

hi
Can some one helps me on this question and explaination.
Logical System Name is defined for which type of Business Sytem ?
a.Third Party
b.Web AS java
c.WebAs abap
d.Standalone java
Thanks
Chandra

Hi ,
Logical System Name is defined for the Business System type WebAS ABAP.
It is used in ALE scenarios when exchanging IDOCs between the particular system and XI. The IDOC adapter will pick up the information from the SLD and it can then be used in the configuration in the Communication Channel (Adapter Specific Identifiers).
Refer to this How-To Guide for more info
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
Regards
Manish

Block material at material type(HIBE) level for movement type "261" & "261"

Hi,
Block material at material type(HIBE) level for movement type "261" & "261".
Requirement: This material type should not issued to the PM orders using above mvt types.
regards,
Venkatesan Anandan

As per standard it is not possible. go for ABAP development

Set up/maintain order type dependent parameters for order type PI01

hello all,
i would like to know how to set up/maintain order type dependent parameters for order type PI01 for a particular plant.
thanks,
maxx

Hi Maxx
Order types are maintained in T Code OPJH
Thereafter go to T Code OPL8 to maintain there dependent parameters and assign it to desired plant
Hope this helps
Rgds

Which type of vedio suport, which type of vedio suport Apple iPod Nano 8GB Black 4th Gen Metallic MB754

which type of vedio suport, which type of vedio suport Apple iPod Nano 8GB Black 4th Gen Metallic MB754

According to this article: iPod nano (4th generation) - Technical Specifications
Video
H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
B-rock

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

"There is no active delta initialization for this IS/ QS/Data Source."

Hi Friends
I am getting this error message while running the infopackage.
" There is no active delta initialization for this IS/ QS/Data Source."
Start Infopackge zpak_xxxxxxx.
There are 2 infopackages aand one ODS Activation brefore this inpackage(it is being updated by that ODS).
Could you please help me in solving this issue.
Thanks.
B V

There is no active Init to ur DS is in place. And hence u need to take an Init.
Try to maintain different IP's one is for the Init and other one is for the Delta.... the one in the PC will be holds good for the Delta..
Try create an Init IP if its not there already and then proceed with the load... if there is no data in the target data target as of now.....
If u have data on the target but some one has deleted the Init flag then u need to check whether all the requests has got posted to the target data target or not.. if not u need to take care of the action accordinly with the initi-Withoutdata transfer and then proceed with the Deltas...
thanks
Hope this helps

Vendor payment doc type KZ looking for account type A which is not defined

Hi Experts
We are processing a Vendor payment where discount is received, howeve, the message "For document type KZ, account type A is not defined' in the job log.
Can anyone please put some light on this error.
Many thanks
Kind regards
Dawn

Hi,
T-code OBA7: there it is defined which doc. type is allowed to use which acount types.
SAP standard for KZ is to use vendor + GL account types.
So check your document that you are going tro post or, if you think its ok, post the same document in a test client and enable doc. type KZ in OBA7 to be used with asset account types to view the result of your posting.
Best regards, Christian

Object type not maintained for message type

Hi,
I am working on chnage pointers for Vendor classification data. when I execute the program RBDMIDOC (BD21) I get the error Object type LIFNR not maintained for Message type.
If anyone has worked on change pointers, please guide me in solving this error.
Thanks
Hari

Hi
Which msg type u r using there.
Regads,
Prasad.

Delta extraction for FI (AR & AP) data sources

I tried extracting the data from 2 standard SAP data sources under FI module for Accounts Receivable.
0FI_AR_10(Customer payment history via delta extraction)
0FI_AR_5 (customer payment history)
The data to be extracted into 0FIAR_C05(payment history) info cube.I assigned the 2 data sources to an info source and pumped the data into the cube via an ODS.Now the problem is with delta extraction.No records are picked in the delta extraction.So I checked in extractor checker RSA3 with delta update mode.I got the following error.
"Could not determine BW release of logical system"
Could some one resolve the issue?Thanks in advance.
Thanks & Regards
Vinay

Hi ,
Please go through 493422 note once . see if suits to your requirement follow it accordingly .
Thanks ,
Anil

Table for List of Active Data Sources

Hello All,
I have a requirement like, to collect List of Active Data Sources from which extractions are happening for the past one year.
Actually i have many Data sources which are in Active State but extractions are happening only on some of the Active Data Sources.
I can collect List of Active Data Sources from Table RSOLTPSOURCE, but how to collect Active Data Sources from which extractions are happening for the past one year.
Is there any such table which satisfies my requirement?
Thanks in Advance!!

Hi Srikanth,
I had similar kind of requirement in my project and I used following approach,
1) We already had a list of all the process chains which extract data from source system. So you also need to get such list if you don't have then goto RSPCLOGCHAIN and get the list of all the active chains.
2)after that goto table RSPCCHAIN and for all of your chains or for a single chain you can put the TYPE as "loading" and you will get list of all the infopackage.
3) Once you get the list of all the infopackages which are loading data from your source system.
4) goto table RSLDPIO and put all your infopackage name and source system you will get the list of all the datasources in OLTPSOURCE field.
Regards,
Durgesh.

SSRS CatalogItem method not working for deploying a shared data source

I have been working with the SSRS CreateCatalogItem method to deploy reports to a SSRS 2012 in SharePoint integrated mode with SharePoint Server Enterprise 2013. I am using Powershell. The CreateCatalogItem method works fine when I deploy RDL files,
but fails when I deploy an RDS. I get an rsInvalidXML1400 error, whatever that is. Here is a cut-down version of my code to establish the bare essentials:
    [String] $reportserver = "server20";
    [String] $url = "http://$($reportserver)/sites/AdventureWorks/_vti_bin/reportserver/reportservice2010.asmx?WSDL";
    [String] $SPFolderPath = "http://server20/sites/AdventureWorks/BICenter/Data%20Connections/";
    [String] $fileFolder = "C:\SiteBackups\BIReports\BIReports\";
    [String] $itemName = "AdventureWorksCube.rds";
    $ssrs = New-WebServiceProxy -uri $url -UseDefaultCredential;
    $warnings = $null;
    $itemPath= $($fileFolder + $itemName);
    $definition = get-content $itemPath -encoding byte;
    try
        $ssrs.CreateCatalogItem("DataSource", $itemName, $SPFolderPath,$False,$definition,$null, [ref] $warnings);
    catch [System.Web.Services.Protocols.SoapException]
        $msg = $_.Exception.Detail.InnerText;
        Write-Error $msg;
I have a workaround whereby I read the XML of the data source file directly and extract the ConnectString and Extension elements then use the text within them to create the data source using the DataSourceDefinition class. My point is not to get a workaround.
I want to establish that the CreateCatalogItem method indeed does not work when used with the ItemType "DataSource". In the code above, if I change the itemType i.e. first parameter of CreateCatalogItem to "Report" and change the $itemName
to the name of an RDL file, it deploys correctly. Has anyone else encountered this behavior or am I doing something wrong here?
Charles Kangai, MCT
author of the following Microsoft Business Intelligence courses:
http://www.learningtree.co.uk/courses/139/sql-server-analysis-services-for-business-intelligence/
http://www.learningtree.co.uk/courses/134/sql-server-integration-services-for-business-intelligence/
http://www.learningtree.co.uk/courses/140/sql-server-reporting-services/
http://www.learningtree.co.uk/courses/146/sharepoint-business-intelligence/
Charles Kangai, MCT

Hello,
We can invoke the SSRS proxy endpoint (ReportService2006.asmx)from PowerShell to publish report definitions (.rdl) and report models (.smdl) to a SharePoint library, but this does not apply to data source (.rds) files.
In order to deploy .rds to SharePoint library without using SSDT, you should convert the .rds file to its .rsds counterpart which is pretty contains same content but in different schema.
If you want to fully automate your deployment, you should write your own converter and perform the deployment by utilizing SharePoint feature framework and SSRS proxy endpoint (ReportService2006.asmx).
Please refer to the following blog about this issue:
PowerShell:Deploying SSRS Reports in Integrated Mode
Deploying Reports in Integrated Mode
Regards,
Fanny Liu
If you have any feedback on our support, please click
here.
Fanny Liu
TechNet Community Support

BW1 transaction for mapping newfield to data source in CRM

Hi,
This will be BW gurus working in the CRM Opportunity area.
Based on my current understanding I have copied the 0CRM_OPPT_H into ZCRM_OPPT_H and wanted to see whether I can map more partner function to map to the data source.
Currently, the following fields are offered by the SAP Delivered data source 0crm_oppt_h in CRM.
PARTNET FUNC    DATA source field     BDOC Mapping bwa1
IN CRM          0crm_oppt_h
Contact person   contact_person    PARTNER-PARTNER_NO
<NOT used>       EXECUTING_CC      PARTNER-PARTNER_NO
configured PF    COMPETITOR        PARTNER-PARTNER_NO
Emp responsible PERSON_RESP       PARTNER-PARTNER_NO
Sales Prospect   PROSPECT          PARTNER-PARTNER_NO
SALES_EMPLOYEE   Employee          PARTNER-PARTNER_NO
Currently we have configured 4 more partner functions for our opportunity transaction, which are not available in the 0CRM_OPPT_H data source. However we shall need these fields to send to BW.
How can we extend the mapping in BWA1 after extending/appending the extraction structure (CRMT_BW_OPPT_H) of the data source? Shall we continue to map these addition fields in the data source to PARTNER-PARTNER_NO as mentioned above? What puzzles us that this is header info and the PARTNER_NO is able to bring info for different partner func.. How this is being possible?
If we also map the same for the additional partner fields will we be able to aviod the BADI/User exit and the code associated that populated these fields?
What is the BKM? How the BWA1 can be used for Extending for more partrner( functions?)
Thanks
AGN

Hi Aswin,
while this is really helpful to enable me to dig into further, the basic question is not yet answered.
Currently the data source 0CRM_OPPT_H are able to extract the following partner data
contact person
prospect
channel pertner
empoyee responsible
However only one( contact person 00000017) is mentioned in our CRM system in the SPRO steps that you have shown.. My first question is how then the data source is able to get the other partner function....
2> Secondly even if I mention all the partner functions in that transaction( as you have mentioned) how do the data source really know where to populate which partner function data.. since the bdoc mapping is Partner-partne_no...
For example if I maintain the following in SPRO
00000017 contact person
00000026 emplyee responsible
How do the data source gets rightly populated ( contact person value in the contact_person field and vice versa).. when the BDOC Mapping for both these two fields are simply partner-partner_no?
Appreciate a detail explanation from you on this.
Thanks
AGN

Problem in filling up the setup tables for 2LIS_11_VAHDR (All SD Data sources)

Hello All,
I have been trying to fillup the setup tables for SD datasources( Application-11 Ex:2LIS_11_VAHDR), but it was not allowing me to do that.
Below are the steps i have followed,
1.Deleted the setup tables using tcode-LBWG- Application-11
2.Cleared the queues in RSA7 and found 0 queues for 2LIS_11_VAHDR D.S by triggereing the I.P till it get zeroes.
3.Checked the data in RSA3-No data found.
4.Filling the setup tables using OLI7BW t-code, got a popu(Data for 2LIS_11_VAHDR has to still transfered)
Do i need clear all the queues for SD-Billings,Orders e.t.c since i have 8 data sources to be cleared apart from 2LIS_11_VAHDR .
Could you please suggest any other option to fillup the setup tables.
Regards,
Siva

Did you run the infopackage twice pertaining to 2lis_11_vahdr.One for delta and another time for repeat delta.As delta queue will hold the records in repeat delta mode as well.
Also in case of Direct Delta --Data is transferred to Base tables and delta queue (RSA7) at the same time.So extraction queue (LBWG )and update tables(SM13) does not come into the picture.
Regards,
AL

Whihc extraction types to follow for which type of data sources.

Similar Messages

Maybe you are looking for