While Activating the Object(0GL_Account) is locked with Conversion

Hi All,
Please provide the solution that when am trying toActivate or to edit the object 0GL_account. It is not getting activated and throwing an error.Am facing the folowing error:
An error occurred in the program:ORA-20000: Insufficient privileges
ORA-06512: at "SYS.DBMS_STATS", line 2150
ORA-06512: at
Error when activating InfoObject 0GL_ACCOUNT.
Characteristic 0GL_ACCOUNT is blocked by conversion
Please check the same and provide the necessary to be taken to solve the error.
Thanks&Regards,
Vijayashanthi.

Have you deleted the master data before activation?
Also You might have to carry out object conversion in t-code RSRV.
ALso refer to thread brfore doing any changes
info object activation problem
Regards
Pankaj
*********Assign pts if helpful

Similar Messages

Error while activating the object from change list in IR

Hi Friends,
I am trying to activate a mapping object taken from History.But I am getting error "version management was unable to execute the last action because temporary internal lock has been set" while activating from change list.
Regards,
Suresh.

Hi Suresh,
have a look at the integration builder start jsp. There is a Link "Administration". On this page, on the left side, you can click on "lock overview" and check if your object is locked. Then you can remove this lock.
Best Regards
Sven

How to align Objects to a path while scattering the objects in even spaces with decreasing size?

Hello
I am facing following trouble:
I am suppose to draw a spiral and on this path i want to align a symbol to it (in my case a circle).
Now i have found two ways how to to it.
First i can use the Brush palette and then apply my symbol to it. but then the problem is the size of the circles are all same but i need the circle to get smaller towards the center of the spiral
Second approche i took, i used the blending options between two objects that i also attach to a path. So i could resolve the issue about the decreasing size but now another problem has appear: The gaps between the circles are not same. I would like to have even spaces.
So now my question is: How can I resolve this my problem?
For better visualising my problem, you can check out this screenshot here: http://goo.gl/PEvZI
If anyone can give me a hint or a tip i would be very appreciating it.
Thanks in advance...
Regards,
Natla

Before you apply the Transform Effect, store the circle as a Symbol. Then, after finding a set of Transform settings you like, drag the resulting object to the Graphic Styles palette. The resulting Graphic Style will not include the basic Appearances (stroke, fill) of the circle; it only stores the Transform Effect. In the palette, the Graphic Style will appear to be blank, but it will contain the Transform Effect. That way, you can apply the Graphic Style to any other object with one click.
Same thing works if you first merely Group the circle and apply the Transform Effect to the Group. But storing the circle as a Symbol also lets you use the Replace Symbol command to instantly swap in/out any other Symbol.
Symbol swapped for one containing an isometric cube:
Symbol swapped for one containing a Lens Flare object:
JET

ERROR WHILE ACTIVATING THE DATASOURCE

Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

Error while activation the Datastore Object

Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
Yash

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

Error while activating the ods ( prod.issue)

Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
<b>Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.</b>
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
Rakesh

Hi Rakesh
The error message
"Key value exists in duplicate (not allowed by the ODS object type)" in the snap you sent, means you set the ODS for unique records. Thats why its not allowing a second with the same value, which is already in the ODS.
Please check your ODS settings, if 'Unique Data Records' is checked or not.
Sorry for my late response!
Regards
GSK

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

SID Generation Error while activating the DSO.

Hello Gurus,
Am trying to load the data to a dso in FIGL, the data is getting loaded to the dso very fine, this is extracting data of 1700000. But the problem is while activating the dso it throws an error "Activation of M records from DataStore object.
In dump error, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
SQL error in the database when accessing a table.
So please advice me to solve this problem would be appreciated and reward points.
Arun

Hello Arun kumar,
That's easy you have errors in the field 0REF_KEY3.
Since it is a DSO it let's you load everything but in the time of the activation it complains!
The system is trying to generate a new SID for the master data of the InfoObject 0REF_KEY3 with that value (or values) and since it has garbage on it (invalid characters like "!", etc.) it gives you that short dump.
Try to find that record, change it in PSA and reload the request again.
TCode-E3//Rec.Typ-CO
The system don't like that string for generating the SID. Try to eliminate "//" and "." from it. (for test purposes you can simple change it to nothing and see if it passes the load and activate again)
Try to see if you have more records like those and fix them too.
That should work.
Please assign points if it helps,
Diogo.

Error : While Importing the Objects in Quality

Dear all,
I'm facing some error while transporting the Objects to quality server. The error's like
Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Activation Mode)
Source system RD1100LS does not exist
Source system RD1100LS does not exist
Source system RD1100LS does not exist
Source system RD1110LS does not exist
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
Anyone suggest me how to solve this error..,
Thanx in Advance..
Regards,
Saran

Hi saran,
Check the source system connectivity of the Quality system. Also check whether you have transported the datasources related to those objects that you transported from DEV to QAS.
First you need to transport the Datasources created in R/3 and then replicate them in QAS/Prod and then transport the objects in BW from DEV to QAS/Prod.
Check all these things and if still the problem persists... Refer to the below threads which may help u...
Transport Problem - Reference to Transfer Structure not available
No Source system exist
Assign points if this helps u...
Regards,
KK.

While activating the ODS i'm getting these errrors

Hi All,
While activating the ODS i'm getting these errrors,
1) The creation of the Export Datasource failed
2) RFC Connection to the source system is damaged --- no metadata upload
3) Error when activating ODS object
What would be the reasons.............?
Plz Reply back me on [email protected]
Regards,
Kiran

Hi,
Im finding a similar issue but with task SDE_ORA_GLJournals,
the code is :
AND DECODE(, 'Y', GL.LEDGER_ID, 1) IN ()
AND DECODE(, 'Y', GL.LEDGER_CATEGORY_CODE, 'NONE') IN ()]
the parameters are also fine in the parameters file.
Has anyone found a solution or an explanation for this?
Thanks a lot, regards
Nestor

Failure while activating the transfer rules

Hi,
While activating the transfer rules, in that process when the system is trying to activating the transfer structure an error is occuring.
Following is the error log.
FREELISTS 004
FREELIST GROUPS 01)
PARTITION BY RANGE (PARTNO)
PARTITION "/BIC/B00077630000000000002" VALUES LESS THAN
(0000000002))
ORA-00604: error occurred at recursive SQL level 1 ORA-01654: unable to extend index SYS.I_CON1 by 1
DDL time(___1): .......167 milliseconds
The SQL statement was not executed
Table /BIC/B0007763000 (Error adjusting the database)
Table /BIC/B0007763000 was not activated
Obj_act >>(___1): ..00:00:01 hh:mm:ss
Following is the log from System Log(SM21) for the same
BY2 Database error 604 at EXE
BY0 > ORA-00604: error occurred at recursive SQL level 1#ORA-01654
BY0 > unable to extend index SYS.I_CON1 by 1065 in tablespace SYST
BY2 Database error 604 at EXE
Every time when I try to activate the transfer rules, it generates a new table "/BIC/B000xxxxxxx".
Let me know if any more details required.
Though there is a SAP Notes(513758) with Symptom which is same as our problem, its of not much use. It only says search for other SAP Notes with KeyWords from error log. We couldn't find a relavant SAP Notes sofar.
Please guide us in resolving the issue.

Hi Aswani,
To further prevent this from occuring, you should assign a BASIS person to monitor the BW system using tcode <b>DB02</b> and watch out for critical objects prior loading process. That way, this error could have been prevented.
You can also device a way to predict which table spaces are needed to adjusted on a scheduled basis based on your actual data growth.
--Jkyle

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Error while activating the request of DSO upload

Hi all,
While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
Is it because no translation exists,if so what should be done for the same.
Thanks in advance,
Chintu.

hi Chintu,
it seems unit BBL not exist in your bw system,
you can update the unit master from r/3,
have you performed 'transfer global setting' ?
check in r/3 table t006a (t006*), if exist you can
rsa1->source system->right click r/3 source system
'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
this update should be scheduled periodic, menu program->run in background and schedule periodic job.
if BBL not exist in r/3, you can manualy maintain,
transaction CUNI.
hope this helps.

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while activating the copy of the standard module

Hi,
I wanted to create a copy of the module material_read_all and so I copied the entire function group.
Now when I am trying to activate it , I am getting syntax error saying that the field does not exist in the global declarations. When I double click on the field name it takes me to another modules of the same function group where the said field is an export parameter.
I cross checked with the standard module and there also no explicit declaration is given. I also tried declaraing the variable again and then activating.But on doing it I got different results from both the modules for the same input and so I had to delete and create it again.
The same thing is happening with other modules also which I am trying to copy.
Can anyone please help me with this.
For copying the function group I entered the main program name in se38 and clicked on copy. It then asked me to copy the modules so I just added 'Z' before the modules to make a duplicate copy.
It is very very urgent.
Thanks in advance
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 11:50 AM

Hi,
I have tried activating all the includes individually and then the main program. But still I am getting the errors. While activating the includes on checking for the syntax error it showed error but on clicking on activating it got activated. But same thing sis not working for the main program.
I also tried with 'activate anyway' but even after that syntax errors are there with the field decalrations.

While Activating the Object(0GL_Account) is locked with Conversion

Similar Messages

Maybe you are looking for