While activating the ODS i'm getting these errrors
Hi All,
While activating the ODS i'm getting these errrors,
1) The creation of the Export Datasource failed
2) RFC Connection to the source system is damaged --- no metadata upload
3) Error when activating ODS object
What would be the reasons.............?
Plz Reply back me on [email protected]
Regards,
Kiran
Hi,
Im finding a similar issue but with task SDE_ORA_GLJournals,
the code is :
AND DECODE(, 'Y', GL.LEDGER_ID, 1) IN ()
AND DECODE(, 'Y', GL.LEDGER_CATEGORY_CODE, 'NONE') IN ()]
the parameters are also fine in the parameters file.
Has anyone found a solution or an explanation for this?
Thanks a lot, regards
Nestor
Similar Messages
-
Error while activating the ods ( prod.issue)
Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
<b>Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.</b>
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
RakeshHi Rakesh
The error message
"Key value exists in duplicate (not allowed by the ODS object type)" in the snap you sent, means you set the ODS for unique records. Thats why its not allowing a second with the same value, which is already in the ODS.
Please check your ODS settings, if 'Unique Data Records' is checked or not.
Sorry for my late response!
Regards
GSK -
Error while activating the ODS (high priority ticket)
Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
RakeshHi,
ODS activation error
Re: ODS Activation Failed with Status 5
ODS activation is failing with incorrect with status 5 erro
Re: Error Activating the ODS data
ODS Activation error
Regards,
San! -
Error while activating the ODS
Dear Experts,
Please help me out,
I am facing one problem while activating the ODS of 0FIGL. Data is uploaded successfully into the ODS but while activeting the ODS, it gives the following error message :
Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
Value 'SWITCH 24 PORT MANAGED -I' (hex. '00530057004900540043004800200032003400200050004F00') of characteristic 0DOC_HD_TXT
SID determination finished for InfoObject 0DOC_HD_TXT
I have also read out all the related post & also applied them in this but still the position is same.
also in RSKC, all the characters are allowed.
please suggest.
Thanks in advance
Neha
Process 000090 returned with errorsHi,
Pliz go thru below article for restricting Invalid chars.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
It might give u an idea or solve your issue.
Thanks,
Jitender. -
When I am activing the ODS object I getting an error as
STDO : Log could not be written on output device T.
and in Msg Txt:
The creation of export Datasource is failed
RFC connection to source system BW2CLNT800 is damaged ==> no Metadata upload
RFC connection to source system BW2CLNT800 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
These r the msg I am getting.
Pls provide me a soultionsHi,
Refer the below links:
Re: ODS activation failed
Re: ods activation error
/message/3075199#3075199 [original link is broken]
With rgds,
Anil Kumar Sharma .P -
DBIF_RSQL_INVALID_RSQL Error while activating the ODS Object
Hello BW Friends,
We have used the Extractor 2LIS_11_VAHDR and enhanced and coded the user exit to extract the data to the required field. Extractor is working fine and able to get the records but when we tried to schedule a data load in BW the request was shown green in the ODS and when saw it in monitor it is still yellow and zero in PSA and the processing hasn't completed. When i tried to activate it manually there is a short dump generated with this error, DBIF_RSQL_INVALID_RSQL. If any one of you has encountered same problem please let us know. Appreciate your prompt response on this.
Regards,
RajeshRaj,
I misunderstood your question.... check whether source system job is processing or not? what about any blocked TRFC'sin SM58.
try to find root cause... ODS activation is not a problem... load is not finished you tried to acivate the request still in the process Yellow.
try to check in Monitor details tab page messages...
All the best.
Regards,
Nagesh Ganisetti.
Message was edited by: Nagesh Ganisetti
Message was edited by: Nagesh Ganisetti -
Data Laoded successfully, giving error while activating the ODS
Hi,
Process Chain is running daily for loading and activating the data into the ODS.
Today the data loaded successfully but the data is not getting activation. I then tried to activate the data manually but still it not trying to get activated.
I check it the Status tab, it is also giving the same Procedure to activate the data manually.
I checked in the Details Tab. It is displaying Errors as :
1. Error getting SID for ODS.
2. Task 0049 for parallel SID assignments terminated with errors.
3. Activation of data records from ODS terminated.
4. System error occured (RFC call)
Please any one help in this issue.
Thanks & Regards
Jagannadha RajuHi,
This is probably because you loaded transaction data before master data and tried activating it.Load the relevant master data, perform the change run and retrigger activation.
It should work.
Else there is a workaround. You can try editing out/blanking out those values in PSA and loading and activating. This will work.
Also try repairing the ODS object in RSRV.
When you activate multiple requests tick the activate serially check box.
thanks,
JituK -
Error while activating the datasource [UD Connect]. getting error as '&'
Hi Friends,
I am trying to get the data from a SQL source through UD connect.
I do the proposal and map all the info objects to the respective columns.
When i acticate the data source i am getting the error as
'&' and Error while Error when activating DataSource 'ZEFF_ENTRY UD_ECUBE'
Please do tell why such errors occur and also the solution to handle such errors.
Thanks in advance.
VeenaHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy -
Error while activating the ODS "Request No longer Exist in ODS".
Hi All,
I had deleted one request from four ODS's before completely loaded from R/3. Now when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
But when i am manually activating this it is not giving me any error.
Please suggest solution for the same.
Regards,
Rohan ShahI had deleted one request from four ODS's before completely loaded from R/3.
Before deleting the request make QM status red and then delete.
when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
Already you have deleted the request. How can you activate the same request?
Have you loaded the data again?
With Regards,
Kishore.
Edited by: Siv Kishore on Apr 22, 2009 3:58 PM -
Error while activating the infoobject 0MATERIAL
Hi Experts,
Iam trying to activate 0MATERIAL infoobject.
But while activating the particular infoobject iam getting few errors saying that
InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIAL
InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BD) of characteristic 0MATERIAL
Please help me out in activation of the infoobject.
Thanks in Advance
ARUNHi,
The object has been used in the Material classification Data source as well(1CL_OMAT001_BB) as per ur thread....
In this case.. u need to make sure that the mapping to this object at the transfer rules are maintained properly or not.. if not try to maintain this object mapping properly in Tranfer rules and check the object is been used in the 0Material as well....
Activate the Infosource once u does these changes.. and check 0Material gets activated properly or not..
Also use use this program for activating ur object:
RSDG_IOBJ_ACTIVATE
thanks
Assign points if this helps -
Error Wjile activating the ODS
Hi Gurus,
I am facing an error while activating the ods please find the message shown in the job log .
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000024 incorrect with status 9 in rsodsacstreq
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000025 incorrect with status 9 in rsodsacstreq
Request REQU_74JUNZ5CM70EWN1XKSP0W5KWI, data package 000026 incorrect with status 9 in rsodsacstreq.
Please suggest how to activate the ods,
Regards,
VikramHi Vikram,
Check data in Data Package 24,25 and 26 there is error in some of the data. this u will find Details tab.
Delete the request from the ODS and
then EDIT the data in PSA and load the data in the ODS again.
then Activate it.
Then it wont fail.....prior to these find the records for which the activation is failing....so that u can edit in PSA.
Thanks,
Nagesh. -
Getting error while activating the smart form
hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is comingRefer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam -
Hi experts,
while activating the data in the ODS , I am getting the following errors.
"System error ocurred(RFC Call)"
Activation of data records from ODS object XXX terminated
"Task 0031 for parallel SID assigment terminated with errors"
"Task 0021 for parallel SID assigment terminated with errors"
"Task 0009 for parallel SID assigment terminated with errors"
"System error ocurred(RFC Call)"
Task 004 2for parallel SID assignment terminated with errors.
When I saw the dump I found the following message
How to correct the error
"MESSAGE_TYPE_X" C
"SAPLRSATREE " or "LRSATREEF28 "
"RSATREE_START_ACTIVATION"
I
Information on where termination occurred
The termination occurred in the ABAP program "SAPLRSATREE " in
"RSATREE_START_ACTIVATION".
The main program was "SAPMSSY1 ".
The termination occurred in line 536 of the source code of the (Include)
program "LRSATREEF28 "
of the source code of program "LRSATREEF28 " (when calling the editor 5360).Hi Kris,
Do u have any red requests in ur ODS Manage. This error is caused when u have red requests and still u r trying to activate the data in the ODS.
Or Probably u have check the check box for bex reporting in setings of ods, Uncheck it and ur error will go.
Try these and let us know
Regards
Majeed -
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Error while activation the Datastore Object
Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
YashHi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish
Maybe you are looking for
-
I want to know how I can assembly the adresses so that I can send everything the same day. Otherwise, I can't remember to whom I have (or have not!) sent my e-mails. I need to do that some times a year, when I send invitations för me little art-galle
-
HP Pavilion Elite e9120y bios does not recognize any cd/dvd/bluray or hard disk drives
I erased my hard disk to install Windows 7. Now my computer intermittently does not recognize that there are any drives attached to the sata ports. I go into BIOS pressing F10 and it does not list any drives at all. I have a DVD burner and a blura
-
Firmware update 1308.0001 for lumia 620 rollout
i would like to know what the regional distribution order is for lumia firmware updates. I have a lumia 620 from hongkong and i live in australia. no update so far . and i make sure to check like twice a day has anyone in australia or in any other re
-
How to Recursively Sum a Sum?
Sorry, everyone, this is driving me nuts. I have the following query, which gives me the relative percentage of [INDEX MARKET CAP]. SELECT *, [INDEX MARKET CAP] * 100/SUM([INDEX MARKET CAP]) OVER() as [%] FROM [S&P_Emerging_SmallCap_(US_Dollar)] So,
-
Need link to upload my yearly subscription to acrobat proXI to a mac ibook Thank you
Does anyone have the link I need to upload my online subsciption for acrobat Pro XI onto a mac ibook?