While activating Transfer rules....

Hello BW gurus,
I am extracting CO Transaction Data from SAP R/3 into BW. I replicated 0CO_OM_CCA_1 standard Data Source into BW and assigned BI Content 0CO_OM_CCA_1 Info Source .
1) In the Transfer rules , all the fields from Data Source got mapped to the fields in Communication structure , other than those  fields I find some fields(extra) in communication structure which are empty, I mean those fields did not get mapped . 
1) what is the reason behind it , what is the main concept ?
2) how do I map these extra fields in communication structure ,and activate Transfer rules?
Points will be alloted ,
Thank you .

Hi Prarthana,
It is not mandatory that all the fields in Communication structure get mapped to the fields retrieved from source system. You can have extra fields in the communication structure means you can map some more fields from source using another data source by assigning same Infosource.
Without mapping them, you can activate Transfer rules and load data.
You can map them and load data into other fields using another datasource.
Hope this helps u...
Regards,
KK.

Similar Messages

  • Error while activating transfer rules needs help.

    The error while activating 0FI_AP_6 transfer rules is listed below.
    ''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

    Hi
    The problem is with your data source replication.
    Activate your data source & replication too.
    Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
    If not so, Activate your transfer rule manually.
    Regadrs
    Saravanan.ar

  • Error while activating transfer rules

    Transfer method 'TRFC with PSA' is not supported by the source system
    Message no. RSAR508
    Diagnosis
    The PSA transfer method is used to transfer data from source system GBQ480 to transfer structure 0ASSET_ATTR_G4. Source system GBQ480 does not support a PSA transfer.
    Procedure
    Define the PSA in the source system.

    Change Transfer method to PSA in Transfer rules and then activate. If PSA is selected, you will not face this error.
    If you still face this error even after changing Transfer method, check below thread.
    Transfer method 'TRFC with PSA' is not supported by the source system
    Edited by: koundinya karanam on May 22, 2008 12:47 PM

  • Problem while transporting transfer rules in BW 3.5

    Hi All,
    I have a problem while transporting transfer rules in BW 3.5.
    I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
    The selections   T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
    Diagnosis
    You need to select an individual DataSource based on the selection conditions
    InfoSource =
    Source System =
    Object Version = T
    Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
    although the select event is not unique.
    Procedure
    Check the objects to which the selection applies.
    Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
    Message no. RSAR436
    Diagnosis
    Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
    However, no DataSource mapping refers to this transfer structure.
    System response
    The transfer structure was not activated or deleted.
    Procedure
    Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
    Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
    Regards
    Lakshmi

    Hi Lakshmi,
    Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
    Also make sure that the Transfer rules are active before it is transported.
    Hope it helps!
    Regards,
    Pavan

  • Error : Activating transfer rules

    Hello Experts,
    I get the message "Error Generating Program" while activating the transfer rules.
    The detailed error message refers to RSAR245 or note 636217. Note refers to table row size being exceeding 1962 bytes. But my transfer structure row size is below 300 bytes.
    Any suggestions appreciated.
    Thanks,
    Sweatha

    Hi Sweatha,
    Sometimes I have experimented this kind of error when activating transfer rules. It seems that there is some content in the buffer that provokes this error. I suggest you to log off the system, login again and try to activate the transfer rules.
    Regards,
    Andreu

  • Error while activating update rule in Inventory

    I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
    Recieved an error while activating update rule  0RT_C17 2LIS_03_BF in Inventory module.
    When I checked the routine ,it shows the following error.
    Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
    I am not usre how to resolve this.
    Kindly reply asap.

    1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
    2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
    3. Then try to migrate you datasource and activate you update rules.
    it may help you
    Regards.
    Rambabu

  • Error while activating Transfer Structure

    Hi Expert,
    we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
    Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
    Message no. EA201
    Diagnosis
    An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
    System Response
    The operation was canceled.
    Procedure
    Please check whether the relevant entry already exists
    I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
    I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
    Regards,

    Hi Dubey,
    I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix  this.
    Thanks,
    Renu

  • Error while installing transfer rules for 0PM_C03 from Business content

    Hi All,
    When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
    "Mapping between 2LIS_17_I3HDR  2LIS_17_ORDER is inconsistent".
    Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR  is the datasource.
    Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
    Kindly help...

    Hi,
    The datasource and infosource can have different names no issue with that.
    and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
    Regards,
    Rathy

  • Error message while upgrading transfer rules

    hi
    while migrating transfer rules to transformations
    i am getting
    automatic time convension not possible for source field kmonth.
    i say continue and continue i got transformations
    whjat is this message how can i solve

    Hi,
    Please check the settings for the mappings in the Transfer Rules. Also, have you made some settings for "kmonth' ?

  • Error while activating transfer cules of 0CUSTOMER_TEXT in BI 7

    Hi,
      I am finding the following error while activating 0CUSTOMER_TEXT in BI 7
      1.  Transfer structure 0CUSTOMER_TEXT_BA does not exist and
      2.   Data element for TXTMD could not be created.
      Can you please suggest me how to resolve these issues ?

    did you replicate ur 0CUSTOMER_TEXT as 7.0 datasource, then you need to use transformations and not transfer rules. if you dont want to use 7.0 Ds, then go to RSDS and recover the datasource to 3.x(menu options). then you can use 3.x dataflow.

  • Error while activating Trnasfer rules

    I am getting the following error, while activating Infosource. Can you please help me identifying the solution
    Syntax error in GP_ERR_RSAPTM2_____________, row 43 (-> long text)
    Diagnosis
    "ZOXID30058" must be a flat structure. You cannot use internal tables, strings,references, or    ...

    Hi,
    Usually this occurs when even the SOURCE SYSTEM is not configured properly. Recently I had the same issue. If the source system is newly configured, meaning other tran structures / rules are working fine then don't go over this process.
    1. Drop the Source System
    2. Re-Create the Source System.
    3. For other than PC Files, "Replicate the DataSources" in the Source System.
    4. Try mapping the transfer rules / structure and activate it.
    Also check the SAP Note no :147195
    Hope this works.
    Regards
    Pavan Prakhya

  • Error while activating transfer structure and communication structure.

    Hi all,
    I am getting an error while activating the transfer structure, I have the same datasource comming from a 2nd instance of R/3 and its working fine with the 2nd source.
    I mean same datasource comming from two R/3 instances and connecting to one infosource.
    <b>Maximum length of segment is 1000 characters, current length is 2567</b>
    Please let me know.
    thanks,
    Sabrina.

    Hi Sabrina...
    there is an OSS Note (120446) related to your problem, but it seems related to a very old release (what's yours ?)
    Anyway, it suggests:
    "the transfer method in the transfer rules must be set to TRFC with ODS"
    Hope it helps!
    Bye,
    Roberto

  • What are the objects need to collect while moving transfer rules to quality

    Hi All,
    In production data loads we have faced alpha conversion errror for the customised object ,so chkd transfer rules in that the conversion box is not chkd for that particular infoobject.So i have chkd that box in dev and activated the transfer rules.So now to transport to quality what are all the objects i need to select ?.
    If i drag drop the transfer rules in transport connection it shows like none of them are selected even infoobjects,infosource,source system and the selection box is inactive for transfer rules.
    So please provide me inputs how to goahead....Thanks

    Hi,
    While activating the transfer rules(after changes)-it proposes you the request number .. that u can transport to target systems.
    Else, using transport conn--> select only necessary objects in grouping --> find ur transfer rules and transport it.
    you can expand all the objects and check only required ones (uncheck others and source sys, coz ss cant be transported)
    Thanks,

  • Activating Transfer Rules

    Hi All,
    After activating the Transfer Rules (means ) what will happen in bw side .  I mean what about psa & Transfer structure?  In the backend of the system exactly what happens while activating T.R's?(what structure formats will create).
    Its my interv ques.  Pls help me.
    Thanks inadvance,
    K. Yogeswaran.

    Hi,
    When you activate transfer rules your BW will create an extract structure, a PSA table, generate a program to write the extracted records into your PSA, generate a program for the transformation of your extract structure into the communication structure (you TRules).
    The PSA table is having exactly the same structure than your extract structure. Now imagine that you had data already in your PSA table.  If you remove a field from your extract structure, that would mean remoiving a field from your PSA table.
    Since you will loose data, the system will generate a new version of your PSA table. You can check the PSA table versions in table RSTSODS. Adding a field to the extract structure won't result in a new PSA table.
    hope this helps
    Olivier.

  • Transport Error while moving Transfer rules - RS_ISMP_AFTER_IMPORT for object type(s) ISMP ( )

    Hello Experts
    Strucked up with an issue while transporting the Transfer rules that are created for an UPFILE source system.
    Transport is included with  list of Data source Replica, Transfer rules, Transfer structure and Info Package.
    My data Source : ZVPRCRDT for an UPFILE
    Below is my error screen :
    Tried to resolve the error by moving the Data source Replica as an individual Transport.
    Still see the same error and my data source is active in the current system.
    Looking for a resolution to find out the root cause.
    Any help is appreciated...

    Thanks for your response Ram.
    My Source System UPFILE is in active mode.
    Unsure why system is throwing error as source system assignement was inconsistency.
    All fields are mapped perfect with one-one relation.
    Worked by reassigning the UPFILE - source system to the data source but still i m seeing the same error : Data Source doesnt exist in source system of version A.
    Transported the DS alone to Quality initially where i m unable to find the transported data source in my quality(target). DO i need to perform replicate meta data ...something like that in quality so that imported data sources will get refreshed?
    If so can you let me know the approach.
    Thanks

Maybe you are looking for