While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

Similar Messages

How to create new field while upgrading from CRM 4.0 to 7.0

Hi ,
How do we create new field on UI and store data into existing field in database?
Is there any option in AET to skip the creation of new field in the database table ?
Custom field is already created in GUI and database table while using CRM 4.0
Now, after upgrading to 7.0 EHP3 , I need to bring this field on the UI .
Using AET may create new field again in the database table.Please suggest.
New filed needed to be created in Marketing Campaign Element Header data.
Thanks
Jayasri

Hi Jayasri,
As a custom fields are already there in crm 4.0. You don't need to use AET again to add field.
These enhancements still exist after the upgrade. Dependent on the enhancement object and type some manual steps are necessary.
For example regarding a single field enhancement for the BP the whole framework is enhanced after the upgrade. There is only one manual step to bring the field on the relevant view(s) via the UI Configuration Tool. For whole BP tables some more manual steps are necessary, these steps are described in the note 1069791 - CRM WebClient UI for EEW enhancements (reference to more notes regarding the EEW after the upgrade).
For set types, we need to generate UI With the help of the UI configuration tool the settypes could become visible in the Web UI.
I didn't understood your scenario, can add little more information why you want to add field by AET if available in DB?
Refer
FAQ - SAP CRM Upgrade from release 4.0 to 7.0
Regards,
Arjun

Changing/Creating Country Field in Address from ESS

Friends,
I am using country version 99 and working on new Implementation of ESS on ECC6.0.
Can any body help me with the following:
- I am not able to Change/Create Country Field in Address from ESS
I got the solution. I need to do the Following:
- viekn field in IT0003 ishould not be empty
- Need to work on report RPUFACEVIEKN and the feature IVWID
Can any one help me how to do this?
Thanks in Advance,
Preethi

Hi,
Please check the threads.
Personnel Information----Tab
java.lang.NullPointerException
Re: PC_UI Switch in T77S0 Table and T582G
PG162 after upgrade
Re: action chanage
Thanks & Regards,
Sandip

Creating new field in a communication structure

Dear All,
I am trying to create new field in a pricing communication structure in the ITEM level. I followed the below mentioned steps to do this.
1. Added MATWA (Material Entered - Material determination) field in the structure KOMPAZ.
2. Activated the structure.
3. Now I need to allocate the new field in the table T681F to the usage and the application area, in which it is to be used. (These are the steps I got from few documents and in the following link [Re: Allowed fields are not showing in the Condition table])
My question is.. How to add this field in T681F table?
Ultimately, I am not getting this field in the Field catalog while creating condition table.

Hi Prem,
I hope you would have added the field MATWA with ZZMATWA as we need to do it with ZZ or YY for custom fields additions in the communication structure.
After doing this, ideally there should not be any problem in adding ZZMATWA in the field catalogue. Try with the following menu path in the IMG
Sales and Dist.->Basic Functions-> Pricing->Pricing Control->Define Condition tables Execute - Add field catalogue.
Or in transaction code VOK0 by selecting the condition tables option in the menu.- Add field catalogue
I hope this helps.
Regards,
Subbu

Structure S955 cannot be enhanced (creating new fields is not possible)

If I try to append in table S950.I am getting error mess like this<b>."Structure S955 cannot be enhanced (creating new fields is not possible)"</b>I have to change any settings?

Maybe this OSS note will help you : Note 527083 - Changes to info structures
https://service.sap.com/sap/support/notes/527083
Regards

Problem in creating new field using AET

Hi ,
We are facing a problem while creating a new field using AET.
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0190611650DB01471683520393954021End?blog=/pub/wlg/12716]
Im following this blog while creating the new field using AET.
After filling all the field details and trying to create a Transport request its going for a runtime error.
The error is happening in class CL_CRM_GENIL_AXT_API
method get_editable_properties.
data lr_field_ext type ref to cl_genil_field_extension.
field-symbols <axt_field_extension> type gtype_field_extension.
data lr_fieldext_ref type ref to if_axt_field_ext_access.
read table axt_field_extension_tab assigning <axt_field_extension> with key ext_bo       = is_key-ext_bo
                                                                          ext_bo_part = is_key-ext_bo_part
                                                                          extension_id = is_key-extension_id.
lr_field_ext = <axt_field_extension>-axt_extension.
if sy-subrc = 0.
While Debugging we can see that the table axt_field_extension_tab is having zero values during the last execution.
But the Zfield is getting generated and the status is in green.
Any suggestions will be highly appreciated.
Regards,
Sijo.
Edited by: sijokjohn85 on Sep 9, 2009 1:00 PM
Edited by: sijokjohn85 on Sep 10, 2009 12:49 PM

Hi,
you posted the same question again in a later post.
Here is my answer:
Hi,
the reason that AET does not work is because there is/are missing entries in one of DB table.
Namely the enhance BO assignment to the UI Object Type.
Could you please tell me, what is the UI Object Type in you current IC application.
In order to figure this out, you can put mouse cursor in one of the field in the UI and then press F2.
Then you can go to SM30 in SAP GUI open the View BSPDLCV_OBJ_TYPE and search for the UI object type.
Select the UI object type and see whether any enhanced BO is defined.
In your case it should be empty, otherwise you can use AET in IC.
And if it is empty we need to figure out which enhanced BO is relevant for the given UI Object Type.
Regards,
Steve
P.S. But still you can raise a CSN message.
The "Create New Field" should be in active mode.

Create New Field - Package is null and non editable

7.0 when choosing the Create New Field in the UI, I get a window where the Package is empty and I can not edit it, the Namespace contains a Z and is not editable.
I select ORDERADM_I but when I select OK I get the message the Package is Required.
I am guessing I need to do something in EEWB? but not quite sure. I did find any other forum questions with this issue.

Hi,
I assumed you are using Application Enhancement Tool.
The prerequesite to use Application Enhancement Tool is you have to maintain the system settings in transaction AXTSYS.
Here you can define a default value, which will be displayed in WebUI.
Regards,
Steve

Is it possible in KM to change "create new file" dialog?

Is it possible in KM to change "create new file" dialog (Folder -> New -> Text File...) on consecution of my own screens(I mean user inputs information, presses next button, then again inputs information and so on)? And if its possible, could you please tell me how to do this. I'm new to KM as well as to SAP EP...

Hi Aliaksei,
the PDF referred to mainly explains how to configure commands (within layout sets etc), but as far as I understand your question, you want to develop your own screenflows / command. First, I definitely would disadvise a beginner in the EP/KM area to start with such a task...
Anyhow, there is a one-step-screenflow-command tutorial on SDN: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/implementing flexible ui one-step-screenflow.article
For more steps, you could start decompiling a command class of a command which is more or less similar to your needs (and the underlying classes) to get further insight.
If you really should get that far and have implemented your own command, you just can switch the implementation class if you want to change the logic for an existing command under System Admin - System Config - KM - CM - UI - Commands - UI Commands - <command in question> Java Class setting.
Hope it helps
Detlev

Create New Field in infotype 0001

Hi
Can any body guide me how to create new field in Infotype 0001,
i want to create two new fields with six reasons in each new field
Thanks

Hi,
his can be acheived through enhancement. Hope these link helps
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4f/d526be575e11d189270000e8322f96/content.htm.
General steps are
Step 1
Using transaction PM01 chose the 'Enhance Infotype tab' and press the create 'All' button.
Step 2
Enter the new fields you wish to add to the Infotype.
Step 3
Once saved and activated the new fields will appear in the Infotype screen and database table
Edited by: Raghu C on Nov 4, 2009 6:15 AM

Create new Security Policy in UME is not available

Hello,
We are on NW CE 7.1 EHP1 and MII 12.1.7 build 47.
I have MII Super Administrator role, few custom roles and I also have Action "Manage_All" and I am able to perform most of the activities on UME but I don't see any option to create new security policies all I can do is modify the Default Security Policy and save it.
It never shows me an option to create new security policy and I am not sure what roles or actions I am missing.
1) Are there any roles or actions that my profile needs to have?
2) Is it something to do with NW CE version or MII version?
3) Has something gone wrong or have we missed some configuration while installing NW CE or MII?
Any suggestions will be of great help
Thanks,
Adarsh

Adarsh,
I am not a NW UME expert, but I know this issue has nothing to do with MII. Not sure if you have rights but providing the Administrators Group for the UME database should allow you to do this.
I would try posting this thread on the NW UME Forum. Modifying policies in NW has nothing to do with MII.
Just to verify what policies are you trying to change, I am assuming they are in NW UME and not MII, is this correct? If they are in MII can you be more specific.
Good luck.

Option to Create new Security Policy in UME is not available

Hello,
We are on NW CE 7.1 EHP1 and MII 12.1.7 build 47.
I have "Administrator" role, "MII Super Administrator" role, few custom roles and I also ensured that "Administrator" role has Action "Manage_All" and I am able to perform all of the activities on UME except that I don't see any option to create new security policies, all I can do is modify the Default Security Policy and save it.
It never shows me an option to create new security policy and I am not sure what roles or actions I am missing.
I need have different security polices for different users based on their roles.
1) Are there any roles or actions that my profile needs to have?
2) Is it something to do with NW CE version?
3) Has something gone wrong or have we missed some configuration while installing NW CE?
I had posted similar question in MII forum but was recommended to post in NW forums.
So any suggestions will be of great help
Thanks,
Adarsh

what is Security Policy ?

NPD Project limit the create new activity button

Hi,
when I go to the Activity tab in a NPD Project, I would like to know if it's possible only the Project team leader user to use the _(create new)_ button (next to the activity name).
Is there a way?
Thanks
Stefano

There is no out of the box way to do that.
If you had to, you might be able to modify the code-in-front to disable or hide the button. Of course, these kinds of changes require you to maintain this customization across all releases, so that isn't ideal.
Otherwise, you could submit an enhancement request

I don't have a "create new list" button in the reminder list when i press edit

I tried to create a new reminder list, I open the reminder app, under Lists, i pressed the 3 bar symbol on the upper right hand corner, then i pressed edit, but there is neither the delete button () nor the "create new list" button. Can someone tell me how to get the create new list button?

I had that problem too!
Do you have a hotmail account that you have connected to?
Because I do and I couldn't make a new reminder list!!
But I fixed it by going to settings and going to mail, contacts and calendar and then under "accounts" i went to Mail and then slided the little dot for reminders to off.
This fixed it for me, hopefully for you too!

Change 'Created' column/field value

I have a business requirement of changing the date of 'created' column/field of selected
document/s in a document library(it has to be changed to current system date). This has to be done by adding a custom button to the ribbon and providing authorization to the button. Please let me know if this is possible?

Hi,
Please refer to the following article.
http://www.learningsharepoint.com/2011/06/13/using-javascript-js-file-in-commandaction-of-custom-ribbon-button-sharepoint-2010/
In the above article, command action is JavaScript function. For example.
<CommandUIHandler
Command=”AboutButtonCommand”
CommandAction=”javascript:ChangeDate();“/>
Create a script file and refer to your command action.
//Referencing the Script
<CustomAction
Id=”AboutFilesButton.Script”
Location=”ScriptLink”
ScriptSrc =”/_layouts/RibbonScripts/ChangeDate.js”/>
You can add the following function to the "ChangeDate.js" file.
function ChangeDate()
var ctx = new SP.ClientContext.get_current();
var list = ctx.get_web().get_lists().getByTitle("CM");
var items = SP.ListOperation.Selection.getSelectedItems(ctx);
var item = list.getItemById(items[0].id);
item.set_item("Created", "2/13/2015"); //change the date
item.update();
ctx.executeQueryAsync(
function () {alert("Created date changed") },
function () {alert ("Error")}
Hope this works for you.
Please don't forget to mark it as answered, if your problem resolved or helpful.

Getting error while creating new fields

hi all,
i am getting an error when i am adding a new field thru eewb to a txn.
error message "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems."
plz helep me out
and i have few doubts
1 in web ui to display these new fields do we need to write a program
2. new field values are stored in table do weneed to create any table ?
3. do we need to write any program so that the values will be stored in tht table?
thanks
madhuri
Edited by: madhuri pasupuleti on Apr 27, 2009 1:33 PM

Hi Madhuri,
For error message "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems."
- Check SAP Market Place for any notes on "CRM_BTX_ADD_NEW_FIELDS"
1 in web ui to display these new fields do we need to write a program
- No need to write any program to display new fields in WEB UI. Using the EEWB will automatically create code behind the screens. All new fields created will be available in base table (example: for business partner - BUT000). You can explore the fields available functionality in WEB UI to populate them
2. new field values are stored in table do we need to create any table ?
- No, EEWB will automatically creates customized structure in code behind the screens
3. do we need to write any program so that the values will be stored in tht table?
- No, I don't know how to add values to the particular field(s) but sure that you don't need to write any program to store the values in customized tables
Cheers,
Peter J.

While adding custom field in urgent change-Create new field button in AET is not coming

Similar Messages

Maybe you are looking for