While adding Sales Order

Hi,
I need to add sales orders through my add-on.
I could add the sales orders.
But, when I'm adding lines to the sales order, I'm getting the following issue:
"There is a difference between the document total and its components.[Sales Order - Rows-Warehouse Code ][line 0] [Message 439 - 133]"
This error occurs only for some of the sales order lines, others are getting added.
Please help me with this.
Regards
Mohana

For your information, I have the same problem and I do GetByKey a Sales Order set the DownPaymentAmount either I set it to DocTotal or any other amount I get the error
Edited by: Marc Roussel on Nov 10, 2010 3:02 PM
Edited by: Marc Roussel on Nov 10, 2010 3:03 PM

Similar Messages

How to block the material qty to 1 while creating sales order (VA01)?

Hi All,
Scenario : We have 20 Materials each with 100 qty in Plant. In the sales order we should have all the 20 materials with qty one. The sales order should throw an error if the material qty is more than 1 and should not allow to create a sales order.
so is there any transaction code where we can block the entire material qty to 1 from the same plant while creating sales order?
Note: We should not set in MM01 "Minimum order qty". Assume we have 100 material in plant we can't set for each material one by one "minimum order qty".Instead of that is there any option to set the whole material qty to 1 as minimum while creating sales order?
Kindly guide me how to proceed.
Thanks,
Renjith

If you have access to idoc before calling the processing Function module, Adding header text segments E1EDKT1 and E1EDKT2 to the idoc will create the header text.
Regards
Sridhar

Changes in Netprice(KOMP-NETWR) While Creation Sales Order(VA01)

Hi expert ,
My issues while creating sales order(Va01) is :
i have added two conditions types namely YVAT and YNBT in Condition , while calculating netprice (NETWR) its picking both values for YVAT and YNBT , i want only netprice excluding YVAT and YNBT , for example
NETPRICE is 3000.00
YVAT      is      50.00
YNBT      is       30.00
NET         is       3080.00
but i want to display only 3000.00 in NET(KOMP-NETWR)
please suggest is there any user exit to do this calculations.

Hi,
I'm not sure if you need to update ADRC table - the address number is usually the the customer's address and is picked automatically.
Also the transport zone is picked automatically based on the customers address or on the shipping conditions in the Sales Order.
Transportation Zone (LZONE) also exists in the partner function (VBPA) and the shipping partner (VTPA) - in case you need to suggest a different route for shipping other than the one determined automatically.
To change this - change both the internal tables table xvbpa and xvtpa (after reading with sales order and item from structures vbak and xvbap) in USER_SAVE_DOCUMENT_PREPARE in the include MV45AFZZ.
But, I'm not sure if the Address Number (determining the shipping point) would be independent of the Transp Zone, though it's changed in the exit.
Regards,
Anil.

Error while running sales order

HI ...ALL ..
In va01 while creating sales order for particular sales area , one error message is coming that material is not maintained in particular storage location . It is actually a scrap material .And in its material master view storage location is not maintained ....
Pls advice ...

Hello Sundar,
Please try creating the storage location view in MM02 and also check if th4e storage location is added under MMSC for that particular material...
Check whether material is extended in that SLOC or not ?
Hope this helps...
Robin.

Statistics Currency Error while posting Sales Order (No: V1453)

Hi Sappers,
I am in process of making a company in SAP ERP SD - IDES, and while posting Sales Order, after I input Sold to Party, PO no, Del Plant and Incoterms and I press ENTER: The error comes up as:
Statistics: The currency from in INR for date 25.11.2011 could not be determined.
Kindly suggest a possible solution.
Thanks
Rahul Tikku

Hi,
Just go to "OBD2", select the Accounts group of your customer and "Double Click" on it, then "Double cliick" on "Sales Data" > Further goto, "Sales" and check if "Currency" field is suppressed. if so then change it to required or optional Entry. save and update you customer master in XD02. Then try your process.
Reagrds
DSR

How to restrict the order reason in Tcode Va01 while creating sales order

Hi Gurus,
My requirement is
while creating sales order in VA01
if order type is Zvol
than the list of order reasons has to be restricted.
Now 15 are coming from OVAU tcode
I need only 5 from these.
Thanks & Reagrds
kals.

Hi,
By doing the user exit in IW32 we achieved the requirement of restriction of maintenance order TECO functionality if any Service Entry sheet pending with reference of maintneance order.
regards
JKM

How to bring in the Open Sales Orders while performing Sales Order Conv

Hi,
Could you give some suggestions on the below:
How to bring in the Open Sales Orders while performing Sales Order Conversion in R12.
Thanks
Pravin

See http://ramugvs.wordpress.com/2011/08/27/how-to-stage-and-import-an-order-using-order-import-api-apps-wms-ebiz-11i-r12/
Sandeep Gandhi

Error determining posting period(infostructure S008,Variant Z2,RC3) while creating Sales orders from Inbound IDOCS

Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan

Thank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan

Error while creating sales order

while creating sales order for a particular plant there is error coming
NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
PLANTXVBAK-VKBUR.
Intailly I have check the no series we have internal no series for all plant,the
number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
kindly guide me for the same.

Hi Sanjay
This is regarding number ranges defining and assigning tips which you can follow as below:
Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
Here you provide the system a specific Number range as follows:
Number range Key Start Number range End Number Range+Current Number
For Example: If you want to propose the following Number Range
*1 9000076000 9000076999 0
The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
*1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
Here , by making this , you are assigning a Key to a Number Range Series.
All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
The Assigning Part is done as follows:
The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
This can also be reached in IMG by:
Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
Besides this:
If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
Similarly,
If a new Plant is created then Billing Number Ranges are required to be maintained.
Regards
Naren

Error while creating sales order with ref to contract

while creating sales order, with refernce to contract system is giving a message
Configuration not possible for material : Reason 3 --> Help
Message no. V1360
and the message is as follwed can any one explain
Diagnosis
This may have been caused by one of the following:
1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
3. A configuration profile has not been maintained
or
A configuration is not permitted for the material
or
4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).

Hi
I think you have both Variant configuration and BOM.
Pls ensure the following.
1. BOM masterdata is maintained for the variants
2. Variant configuration is configured correctly
Configuration profile is created for the material
Knowledge base object and run time version are available
3. Maintain materials as not relevant for delivery or dont give delivery quantity as 0
Once you are sure that these are in proper shape, you can start creating order. The problem wont come.
Reward points if it helps you.

Error while processing sales order as factory calendar missing.

"factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

Hi Malik, How are you? I'm sorry to trouble you,
Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
the topic "How to update Factory Calendar in SRM", and might I have the same
problem. It's with the "factory calendar".
In transaction va02 when I choose a Delivery Date, and I sent it to process, as
a result in the "shipping tab" it calculated to the first item one date, and to
the rest one date different. I don't know What it happen?
I debugged the program and I saw that to the first item use to calculate the
date is the function 'APO_SCHEDULING', and to the rest item use
'SD_SCHEDULING', and until here I come.
How can I do to what the dates calculated are the same? or What would be the
problem?
I need the dates calculated are equal.
I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
correct?
Thanks In Advance,
My best regards,

Error while raising sales order

Hi all,
I have created a make-to-order material with item category group and general item cetegory group 0001.
While raising sales order for that material (make-to-order) item category TAK.
I got a error stating that plant is not assigned to controlling area.
can anyone help me out in this regards.

hi pavan,
pl check this on settlement rule :
The settlement rule consists of the sender and the settlement distribution rule which includes the settlement receiving accounts, distribution factor, settlement type, and validity period. You can change the settlement rule manually.
There are two possibilities for settling sales orders. You can either:
Settle to a business segment
In this case, the settlement rule is determined automatically. You can only use this method of settlement if CO-PA is activated.
Settle to a general ledger account
In this case, you enter the settlement rule and the general ledger account number manually in the sales order.
To change the settlement rule, choose Edit ® Settlement rule.
For more detailed information about settlements and especially about processing settlement rules, see the CO Cost Object Controlling documentation.
Please consult your FI guy so that he can help you configure a settlement profile.
regards
sadhu kishore

Error while saving sales order

Hi I am encountering below error message while saving sales order:
Warehouse
Specify export data in material master
Then I go to material master to check foreign trade export tab, and I had maintained commodity code export group, country of origin and region of origin, what did I miss? Help.

Hi,
Check whether you have activated legal control data for the Sales Order type configuration in Foreign Trade.
If the Order type is activated then the following error message can pop up unless you maintain in material master.
See whether export legal control data is activated or not for the order type.
In IMG Sales and Distribution>Foreign trade>Legal control section
Regards,
Saju.S

Error while create sales order

Hi,
Please help.
I am facing error while create sales order.
No item category available (Table T184 OR VERP )
Message no. V1320
Diagnosis
No item category could be determined for the combination OR VERP .
System Response
The system does not allow further processing of this item.
Procedure
Check the entries in table T184 by means of which item category determination is controlled.
If you do not have the authorization to do this yourself, contact your system administrator.

Hi,
Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
Path
SPRO-SD-sales-sales douments-sales document item-assign item categories.

Error throwing while creating sales order

Dear all,
While on sales order creation,We have entered order type,sales organization,distribution channel,divison,
on entering sold to party,presssing enter,error is throwing as
No customer master record exists for sold-to party
actually customer master record is already created,
We need to extend the sales area then only system is allowing to create sales order,
Is there is any setting missing in configuration ?
Thanks
Jeyakanthan

hi,
can be done in two ways
1, only for the paticular customer
goto XD01 and extend the customer by entering new sales area above
and the already exisisting sales area in the reference
2,common distribution channel and common division(this is for all the customer created in that particular sales area)
IMG>sales and distribution>master data
regards
senya

While adding Sales Order

Similar Messages

Maybe you are looking for