While adding some fields to the exixting report

I am getting the following error while try to add some fields to the existing report.
Invaid page size.

Hi,
enable confine mode and expand the frames and then add fields .
--Basava.S

Similar Messages

Error while adding new field in the Segment type thru WE31.

Hi All,
I want to add one field in the Z segment type using WE31.But i am getting the error message as
'Current segment definition <segment name> can no longer be changed and The current segment definition
is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
The current segment defenition which i am trying to change got the SAP release of 45B. But the system has upgraded to Ecc6 recently.
I tried going to the edit menu and cancel the release, but still it is not allowing.
Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
Points will be rewarded
regards,
neslin.

Hi
You can create a new version. This will not create any problems. You might not be able to cancel the release because of upgrade.
Thanks
Vijay

To show a special field on the ME2K report

Hi everyone,
The question is about adding a field in the ME2K report. In the layout is needed the PO status, that is wether the PO is still open/completed or not. I was taught dynamic selection can be used to filter by the 'Delivery Completed' criteria, however the info does not appear on the report when doing this way. Is there a way, excl. programming a new transaction, to have the 'Delivery Completed' field appearing on the report? Are special fields available for ME2K?
Many thanks and regards,
SB

to close

Adding fields to the standard Report

hi ,
could u plz tell me what r the guidelines we have to follow
while adding fields to the standard Report. (Ver ECC 6.0)
in QA32 Tcode, after executing it will generate a report there i hv to add it.
I could find structure of that main final table, i hv appended desired field also,
Now im looking into Enhancement spot for it, is there any method to do it.
Plz hv eye on it.
Regards
Vivek

Hi ,
this is the exact answer for your question.
Go to the inclide RQALVF14 in this there is a perform call_listviewer_f14, in this the output is displaying using REUSE_ALV_GRID_DISPLAY function module . before this do like this ..
modify the output table p_object_tab like this .
the output table is of structure QALS_D02 you can extend this by appending a structure with the custom fields and there is an enhancement ( i have checked it) in this routine call_listviewer_f14 in RQALVF14. Create an enhancement in this routine at the start of the routine and modify the output table using your custom code in it , then you wil get the data as well as fields into fieldcatalog,.
Regards,
Venkat Appikonda.

How to have some fields in the header of the report

Hi All,
we would like to have some fields in the header of the report (every page but the first page), but Word won’t let you insert fields into the header. Are there any work arounds to do something like that?
Thanks,
Vandana

'Insert Menu -> Field' does not work for headers.
Try this. Say if you want to insert a XML tag named TRX_NUMBER in header. Put <?TRX_NUMBER?> in the header. This will display TRX_NUMBER tag in header.

I want to add some fields in the report of FBL5N, Can anybody tell me how ?

I want to add some fields in the report of FBL5N, Can anybody tell me how to do it?
The fields are sales order, delivery, order quantity, net value and others.
I can only find the shipment number in FI document.
Thank you very much.

Dear Jie,
Billing document number can be displayed in customer line item display
(FBL5N) and not in G/L line item display (FBL3N).
The value of VBELN is saved in table BSEG. So, this means, you
have to define the field BSEG-VBELN as a special field in table
T021S. Then you can use it in FBL3N, because then the report looks
directly in BSEG-VBELN.
For further information,please read the SAP note 207436. You don't have to
implement the coding corrections, if they are already in your system
with the hotpackage. But it explains very detailed the system
behaviour. The example in the note with field EBELN could be
replicated on your field VBELN.
About the MEINS field, please refer to 1-U_MEINS (bseg-meins field).
The SAP note 215798 may also be helpful.
Mauri

Reg: Adding field in the msci report

Dear All,
               In our business process, we are using msci report with user defined say example S966, our requirement is to add the new field in the existing report,
              I have found that field in mc18
             Incorporated that field in key figures in mc22,
           But it is not showing in the report,
Please tell me what else to do to get that field updated in the report.
Regards,
ram

Hi all,
          Any contributions plz........
regards,
ram

While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

View Customer number field in the FBL3N report

Hi All,
Is it possible to view the Customer Number Field in the FBL3N report??
Please revert asap.
Rgds,
Kunal Vichare
Moderator: Please, search SDN

Hello
Please find the process for adding additional field in FBL3N
SPRO->FA->GLA->GL->Line Item->Display line item with ALV->Define Special Fields for finding and sort data
Added the additional field for Customer account number.
Table Field name Field lable
BSEG KUNNR Customer
Thanks
Kameshwar Rao

Addition of new fields in the standard report QM15

Dear Experts,
i need to add new fields to the standard report t.code QM15 which display the list of items: selection of notifications.
the fields i want to add are:
1. batch no
2. Sample no
3. Main vendor
4. text for CDR
plz let me know how can i do this. if any one can help me with screenshoot doc. this is really helpfull.
Thanks
Sachin
Moderator message: "spec dumping", please work yourself first on your requirement.
Edited by: Thomas Zloch on Sep 28, 2011 9:45 AM

Hi,
Have you added the selection text for the field ? also check the activation status.
Regards
Bikas

In BDCs, after adding one field to the screen, which one is the better proc

Hi,
My client requirement In BDCs, after recording the legacy data by using MM01, After some time adding one field to the screen, How can we record the for the new field.
If any one knows pls help me total process.
Warm regards,
Venkat.

Identify the screen in which this new field is added and simply add one more line to add the bdc record for this field in that screen.
If the screen is also entirely new, then you have to identify the previous screen, the okcode to go to this new screen and finally the next screen and the okcode to go to the next screen along with the field BDC record.
I don't think it is necessary to redo all the recording as long as you can follow the existing code.

Add fields to the standard report QM15

i want to add fields to the standard report.
t.code QM15 which display the list of items: selection of notifications.
the fields i want to add are:
1. batch no
2. Sample no
3. Main vendor
please let me know how can i do this. if any one can help me with screenshot doc. this is really helpful.
Thanks

Hi experts,
I have done with the z** creation of the standard report. I also create the z*include for the standard includes which are in the standard program. But I not able to find the fieldcatlog or include where I can add my new fields.
But I tried with one structure tht is standard structure in tht standard report so i make it as z*structure and I append my new fields to this structure. I debug the report and this works fine and also shows output, but at output when I change the layout to see these new fields it shows dump.
Then I tried with one more thing to give the positioning to my new added fields. (This is what u can say column positioning ).
When I execute this,it goes to dump screen.
Now I don't what to do with this.
If any one like to see the code. Plz let me know I will post the code.
Or if any one have any document on this plz share. Or any other solution.
Thanks in advance.
Thanks
Sachin

How to create new subsite while adding new item to the list by using javascript?

hi,
I hav a task ie, when I add item to the list then subsite will create with that list item title and description . So By using javascript, I have to create subsite while adding new item to the list.
Help me to solve this.
Thank you,

Is your item getting added through Javascript client object model ? If yes, you can write in the success delegate of your list creation method the logic to create the subsite.
function CreateListItem()
var clientContext = new SP.ClientContext.get_current();
var oList = clientContext.get_web().get_lists().getByTitle('List Name');
var itemCreateInfo = new SP.ListItemCreationInformation();
this.oListItem = oList.addItem(itemCreateInfo);
oListItem.set_item('Title', 'My New Item!');
oListItem.set_item('Body', 'Hello World!');
oListItem.update();
clientContext.load(oListItem);
clientContext.executeQueryAsync(Function.createDelegate(this, this.CreateListItemOnSuccess), Function.createDelegate(this, this.onQueryFailed));
function CreateListItemOnSuccess() {
var subsiteTitle = oListItem.get_item('Title');
//Logic to create a subsite
function onQueryFailed(sender, args) {
I have added a sample flow for the above scenario. Have a look at the following lnk for how you can craete a subsite using ecmascript.
http://ravisoftltd.wordpress.com/2013/03/06/sharepoint-2010-create-site-with-ecma-script-with/
Geetanjali Arora | My blogs |

To edit the field in the ALV report

Hi,
    i want to edit the field of the ALV report what i need to do for that..
Thanks & Regards
Ashu Singh

hi,
check the code,
REPORT zalv_fcat.* Output table T006 structure declarationTYPES : BEGIN OF ty_t006.
        INCLUDE STRUCTURE t006.
TYPES : END OF ty_t006.*Internal table and wa declaration for T006
DATA : it_t006 TYPE STANDARD TABLE OF ty_t006,
       wa_t006 TYPE ty_t006.*declarations for ALV
DATA: ok_code               TYPE sy-ucomm,
fieldcatalog for T006
      it_fielcat           TYPE lvc_t_fcat,
fieldcatalog for fieldcatalog itself:
      it_fielcatalogue           TYPE lvc_t_fcat,
      it_layout           TYPE lvc_s_layo.*declaration for toolbar function
DATA:   it_excl_func        TYPE ui_functions.
Controls to display it_t006 and corresponding fieldcatalog
DATA: cont_dock TYPE REF TO cl_gui_docking_container,
      cont_alvgd     TYPE REF TO cl_gui_alv_grid.*controls to display the fieldcatalog as editable alv grid and container
DATA: cont_cust TYPE REF TO cl_gui_custom_container,
      cont_editalvgd     TYPE REF TO cl_gui_alv_grid.*intialization event
INITIALIZATION.*start of selection event
START-OF-SELECTION.
LOCAL CLASS Definition for data changed in fieldcatalog ALV
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS handle_data_changed
      FOR EVENT data_changed OF cl_gui_alv_grid
      IMPORTING er_data_changed.
ENDCLASS.                    "lcl_event_receiver DEFINITION
LOCAL CLASS implementation for data changed in fieldcatalog ALV
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
ENDMETHOD.                    "handle_data_changed
ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION*data declaration for event receiver
DATA: event_receiver TYPE REF TO lcl_event_receiver.*end of selection event
END-OF-SELECTION.*setting the screen for alv output for table display and
*changed fieldcatalalogue display
SET SCREEN 600.
On this statement double click it takes you to the screen painter SE51. Enter the attributes
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
*Go to SE41 and create status 'STATUS600' and create THE function code 'SUBMIT'
*and 'EXIT' with icons and icon texts
Also create a TitleBar 'TITLE600' and give the relevant title.&----
*&      Module STATUS_0600 OUTPUT
MODULE status_0600 OUTPUT.
SET PF-STATUS 'STATUS600'.
SET TITLEBAR 'TITLE600'.
CREATE ALV GRID CONTROL IF DOES NOT EXISTS INITIALLY
IF cont_dock IS INITIAL.
    PERFORM create_alv.
ENDIF.ENDMODULE.                             " STATUS_0600 OUTPUT* PAI module of the screen created. In case we use an interactive ALV or
*for additional functionalities we can create OK codes and based on the
*user command we can do the coding as shown below
*&      Module USER_COMMAND_0600 INPUT
MODULE user_command_0600 INPUT.
CASE ok_code.
    WHEN 'SUBMIT'.
*TO GET THE CURRENT FIELDCATALOGUE FROM THE FRONTEND
      CALL METHOD cont_alvgd->set_frontend_fieldcatalog
        EXPORTING
          it_fieldcatalog = it_fielcat.
*refresh the alv
      CALL METHOD cont_alvgd->refresh_table_display.
*to Send Buffered Automation Queue to Frontend
      CALL METHOD cl_gui_cfw=>flush.*Exit button clicked to leave the program
    WHEN 'EXIT'.
      LEAVE PROGRAM. ENDCASE.ENDMODULE.                             " USER_COMMAND_0600 INPUT&----
*&      Form CREATE_ALV
&----FORM create_alv.*create a docking container and dock the control at the botton
CREATE OBJECT cont_dock
      EXPORTING
           dynnr = '600'
           extension = 100
           side = cl_gui_docking_container=>dock_at_bottom.*create the alv grid for display the table
CREATE OBJECT cont_alvgd
      EXPORTING
           i_parent = cont_dock.*create custome container for alv
CREATE OBJECT cont_cust
      EXPORTING
           container_name = 'CCONT'.
*create alv editable grid
CREATE OBJECT cont_editalvgd
      EXPORTING
           i_parent = cont_cust.* register events for the editable alv
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_data_changed FOR cont_editalvgd. CALL METHOD cont_editalvgd->register_edit_event
    EXPORTING
      i_event_id = cl_gui_alv_grid=>mc_evt_modified.*building the fieldcatalogue for the initial display
PERFORM build_fieldcat CHANGING it_fielcat it_fielcatalogue.*building the fieldcatalogue after the user has changed it
PERFORM change_fieldcat CHANGING it_fielcatalogue.*fetch data from the table
PERFORM fetch_data.*    Get excluding functions for the alv editable tool bar APPEND cl_gui_alv_grid=>mc_fc_loc_append_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_insert_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_cut TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_asc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_dsc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_subtot TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_graph TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_info TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_print TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_filter TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_views TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_export TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_paste TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_find TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_copy TO it_excl_func.
*Alv display for the T006 table at the bottom
CALL METHOD cont_alvgd->set_table_for_first_display
    CHANGING
      it_outtab       = it_t006[]
      it_fieldcatalog = it_fielcat[].
optimize column width of grid displaying fieldcatalog
it_layout-cwidth_opt = 'X'.* Get fieldcatalog of table T006 - alv might have
modified it after passing.
CALL METHOD cont_alvgd->get_frontend_fieldcatalog
    IMPORTING
      et_fieldcatalog = it_fielcat[].to Send Buffered Automation Queue to Frontend CALL METHOD cl_gui_cfw=>flush. Display fieldcatalog of table T006 in editable alv grid
CALL METHOD cont_editalvgd->set_table_for_first_display
    EXPORTING
      is_layout            = it_layout
      it_toolbar_excluding = it_excl_func
    CHANGING
      it_outtab            = it_fielcat[]
      it_fieldcatalog      = it_fielcatalogue[].
ENDFORM.                               " CREATE_alv
*&      Form fetch_data
FORM fetch_data.* select data of T006
SELECT * FROM t006 INTO TABLE it_t006 UP TO 50 ROWS.
ENDFORM.                               " fetch_data
*&      Form BUILD_FIELDCAT
FORM build_fieldcat CHANGING it_fldcat TYPE lvc_t_fcat
                                   it_fcat TYPE lvc_t_fcat.
Fieldcatalog for table T006: it_fldcat
to generate the fields automatically CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'T006'
    CHANGING
      ct_fieldcat            = it_fldcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.*----
Fieldcatalog for table LVC_T_FCAT:it_fcat
Generate fieldcatalog of fieldcatalog structure.
This fieldcatalog is used to display fieldcatalog 'it_fldcat'
on the top of the screen. CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'LVC_S_FCAT'
    CHANGING
      ct_fieldcat            = it_fcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                               " BUILD_FIELDCAT
*&      Form CHANGE_FIELDCAT
*after the user has modified the fieldcatalogue we build another fieldcat
*for the modified alv display
FORM change_fieldcat CHANGING it_fcat TYPE lvc_t_fcat. DATA ls_fcat TYPE lvc_s_fcat. LOOP AT it_fcat INTO ls_fcat.
    ls_fcat-coltext = ls_fcat-fieldname.
    ls_fcat-edit = 'X'.    IF ls_fcat-fieldname = 'COL_POS' OR ls_fcat-fieldname = 'FIELDNAME'.
      ls_fcat-key = 'X'.
    ENDIF.    MODIFY it_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM.                               " CHANGE_FIELDCAT
ref:saptechnical tutorial.
Regards,
Anirban

How do I add a playlist to iTunes Match so that it'll appear on my Apple TV? It was appeared on it before but ever since I added some CDs to the playlist, it won't show anymore. Please help.

How do I add a playlist to iTunes Match so that it'll appear on my Apple TV? It was appeared on it before but ever since I added some CDs to the playlist, it won't show anymore. Please help.

When new content is added to a playlist it has to be updated for it to be available across devices. If it's content that isn't matched the playlist is removed from the cloud. Did you make sure to access store - update iTunes Match? It should do it automatically after a few minutes but the odd time I have to force it.
Other than that may want to try reboot, log out/in.

While adding some fields to the exixting report

Similar Messages

Maybe you are looking for