While app run with foregin vendor

hai gurus,
          in app running T code F110 payment to foreign vendors in edit propsal showing error  *error in creating payment document , read job log*

Hi,
Check if there already a proposal created with same Parameters,  Delete tht earlier Proposal and rerun the New Proposal .
Thanks
Goutam

Similar Messages

  • How to app run for foreign vendors and customers please tell the steps

    hai every body this is raj
    i am asking how to create the foreign vendors and how to apprun for foriegn vendors please tell the steps
    and another questions is how to run app for customers t

    Lets say your company code is in country IN.  Every vendor you create (using XK01, lets say) with a country other than IN is a foreign vendor for your company code.  To enable APP for foreign vendors, make sure you check the checkbox 'Foreign Business Partner Allowed' in 'Payment method in company code' in T Code FBZP.  If the vendor invoice is in a foreign currency, make sure you include that currency as permitted currency for that payment method.
    To run APP for customers, your 'Payment method in country' in FBZP must be for incoming payment.

  • Downpayments should auto reduce while APP run, net amount only need to pay?

    Hi
    We are in Go-Live phase. Client requirement is as follows:
    After P.O. Creation, Down Payment will be made with reference to respective of that P.O.
    MIGO & MIRO will be done as per business process (Here while doing MIRO Down Payment existed against that P.O. warning   message is coming)
    ***Actual requirement is here before clearing the Down Payment, Client wants to run Automatic Payment Programe.  So, here after reducing the Down Payment amount only net Outstanding amount only system should pick up in this Programe run.
    How it is possible?  Suggetions are highly appreciated at the earliest........
    Regards
    Chinnu

    Hello Vinila
    I am appreciating for your valuable inputs.  But here every thing is ok as you suggested.  But whenever i am making vendor down payment thru F-48 and after posting the document, it is immediately system setting "block for payment - A" in block indicator.
    So, here is the actual issue, whenever i am removing the block indicator "A" in the document then in F110 it is working properly.  But directly i am unable to edit after proposal running from F110.  Why the system authomatically setting block indicator for this document only.  Where is the actual issue i am unable to understand.
    If any body know to rectify this issue, kindly revert back me ASAP.
    Regards
    Chinnu

  • Turn off screen while apps run Need help

    I'm running the SiriusXM app to stream music but I don't want the screen to keep after I choose my station. Does anyone know of a way to blank the screen? Is there a setting so when there is no touch activity it goes blank?
    Also If you switch tabs it won't keep running the music in the background?  I have a choice tunes or surf but not both?
    Thanks
    I'm here you wish you were too

    You should be able to just tap the power button to turn off the screen.  The app should keep running just fine. 
    If it doesn't, that's a problem with the app.  I also have a music app in the Android Market and it is possible for the programmer to grab what are called "sleep locks" to enable the screen to be turned off without losing required resources like WiFi and the CPU.  My app lets the screen dim, but not go off... however, the user can turn the screen off and the app keeps working.

  • HT201304 What happens if you are disputing an in-app purchase with a vendor that is in CHina and is not understanding your issue and refuses to add the disputed purchase or refund the purchase?

    I made an in app purchase and the game (Happy Farm) crashed but I completed the purchase on my iPad's Home screen because the Confirm purchase window popped up before I could relaunch the game.  When I launched the game the purchase (which was Gems) was not showing so I took a screen shot of the game window showing 211 diamonds, which was the amount I started with, (the purchase was for 258 gems so my total should be 499).  I then took a screenshot of myhome screen showing the time of day.  I went back to the game repurchased the same amount, the app did not crash this time and I was credited with correct about of gems 211 +258  = 499... Took a snapshot of that screen.  went back to my home screen and took a screen shot to show the time again.  Well after sending Happy Farm all of this evidence, they responded that they gave me all the gems and I just used them all.  I don't believe that they understand that my app crashed and during the 1st transaction and I clicked the Buy button (in the Confirm purchase window) on my Home screen not in the App, got charged but did NOT recieve the gems when I relaunched the app.  I have more proof than most people and they are still calling me a liar... I need intervention from iTunes App store and I don't know how to get them to mediate this dispute. Do you know how I can get in touch with the App store?

    https://getsupport.apple.com/Issues.action

  • Will All Types of Windows Apps Run With BootCamp?

    I am fed up with the quality of Windows hardware and computers and am considering the purchase of a MacBook Pro to use with both operating systems. I am a long time user and developer on both OSX and Windows. My question is, can I expect programs such as Microsoft Visual Studio with all of its add-ins and other development software to work correctly running Windows 7 on the Intel Mac? I have heard horror stories about using Parallels and I don't mind rebooting to change operating systems, but I also don't have the time to deal with any additional issues other than what I am going to face anyway with these programs running in native windows. Will they run on the Mac as well as they run on a Windows box?

    Graphic drivers are often a pain to install, and some Windows updates have been tricky or not worked.... .NET Framework update was one such.
    Yes, "it should" but due diligence, backups, and I would say the same for Mac or any OS.

  • No Internet Access while Apps configure with Static IP - How to resolve?

    Dear Legends,
    I have installed a development instance which my configuration as follows:
    OS - Oracle Enterprise Linux 5.7 64 bit
    Instance - R12.1.3
    HDD - 500 GB
    RAM - 8GB
    IP - static - 192.168.1.10
    Subnet mask - 255.255.255.0
    Gateway - 192.168.1.1 --> router ip
    I need to setup a static ip only, but if i setup a static ip am able to access instance but no internet access, so that if i need to do any automation work like cron and sendmail is not working. How do i resolve this?
    1. I tried to setup a static ip configuration as editing the /etc/hosts and entry as
    192.168.1.10 hostname alias
    2. edited the resolv.conf for adding a nameserver as follows
    search hostname
    nameserver primary dns
    nameserver secondary dns
    but these entries are not available when i issue a service network restart
    3. Edited /etc/sysconfig/network-scripts/ifcfg-eth0
    # Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
    DEVICE=eth0
    BOOTPROTO=none --> even i have changed this to STATIC/none but no change
    HWADDR=B8:88:E3:30:1A:ED
    ONBOOT=yes
    TYPE=Ethernet
    USERCTL=no
    IPV6INIT=no
    PEERDNS=yes
    HOSTNAME=devl.rel.net
    IPADDR=192.168.1.10
    NETMASK=255.255.255.0
    GATEWAY=192.168.1.1
    Since i'm trying to update my old threads if it is similar to this but i dont find any old threads, please kindly request you to provide your valuable suggestions.
    Regards,
    Karthik Singh

    karthiksingh_dba wrote:
    Hi Hussein,
    As per your request i am continuing this thread in the followiing link HOW TO ACCESS MY VISION INSTANCE GLOBALLY? is it correct?
    Regards,
    Karthik SinghYes.
    Thanks,
    Hussein

  • App run complete configuration

    hi,
    this is jana,i wants to know the configuration of app run with stuff,pls forward me

    Hi,
    Before configuring APP you must have created your House Bank through FI12
    APP complete config is done in only one T-Code FBZP.
    1. Select your company code in Button- All Company Codes
    2.If you want to put any minimum amount for Incoming or Outgoing payment in APP mention in Button-Paying Company Codes
    3.Create a Payment Method in the country, or you can copy the Payment Method from the respective country. Eg. Let suppose you want to create a Payment Method for country IN select the existing payment method of your interest and copy.
       -here you have different options select according to  your requirement
       - You can have different document types for Payment and for Clearing
      <b>Note:</b> In the Payment Medium section give any name of your choice for the Payment medium program , but start with "RFFO" Eg: RFFOIN_C.  By specifying the program name here, you prevent the form from being printed by mistake using a program that is defined for another payment method.
    Enter the allowed Currencies for the method.
    4. Define the Payment Method in company code at Button-Payment Methods in Company Code.
        - Here you can have the maximum amount restriction
        - Grouping options at the payment run
        - In the <b>Pyt.Adv.Ctrl</b> Button you can control the no.of line items to be   printed on the payment advice.
    5. Determine the banks used for payment @ Button- Bank Determination
       - Select your company code and give the order for Bank Selection for the payment
       - Mention the House Banks and the GL accounts to be posted on payment
       - You can restrict the funds available per bank for the method in Available amounts
    6. you can retrive already created house baks @ Button -House Banks
         <b>Note:</b> You can also create a house bank here.
    It is very simple to configure the APP
    After configuring the APP, mention the applicable Payment Methods in the Vendor and Customer master records in the Payment Transactions Section of Company code Data.
    Pl. revert for queries
    Thanks
    VK

  • APP Run Date Field

    Hi Experts,
    Why does the drop down of the run date field in APP (f110) showing previous run dates? What is the logic behind not using a date picker?
    Thanks in advance,
    Em Jay

    Hi Em Jay
    It means the dates were used for periviouly APP run, so that is the reason it shows you. So here logic is if you give the previous date which is appear in the drop down list, you can see the status of your APP run with reference of Date and identification.
    Example :
    Parameters have been entered,
    Payment proposal has been created,
    Payment run has been carriedout
    Regards
    Dileep

  • Multiple payment methods in APP run

    Hi,
    Can we create APP run with multiple payment methods example- Cheque and Bank Transfer in the same run. Kindly suggest.

    Hi Nabin Ji,
    As mentioned by others, mention the payment method for cheque and bank transfer in the parameters tab and also maintain the respective payment programs in the last tab Printout/Payment media.
    In FBZP, you define a Payment program for each payment method.
    You can execute multiple payment methods.
    Regards,
    Kavita

  • I had problem with my apps,they open for a while and closes with in seconds i cant acess them

    i had problem with my apps,they open for a while and closes with in seconds i cant acess them and i had this with all apss,expect apple apps

    Do you have a lot of apps? Did you use a lot of apps recently? If so, many of them may still be resident in memory even if you aren't currently using them. Double-tap the home key and you should see the app tray with a list of most recently used programs. Press and hold the icons in the tray and remove the ones you don't use often to remove them from memory. Powering off and then back on might also help.
    My wife's iPod does that sometimes, and it's usually because we run out of memory due to apps remaining in memory even when not used. The suggestion above is how we normally fix the problems.

  • I am having problems with migration assistant (windows pc to Mac 2011) When I get to the 'Quit other applications' box and click continue, nothing happens. There are no other apps running - any ideas, please?

    I am having probems with migration assistant. Trying to transfer data from a windows laptop to iMac 2011. It was working fine when I did the set-up yesterday, but it was going to take hours to transfer some videos so I quit the process with the intention of doing it again at a later stage. However today I find that everytime I get to the 'Quit other applications' box on the Mac and click 'continue', nothing happens. Have checked mission control and confirmed no other apps running. Tried several times with the same result every time. Migration Assistant running on my laptop with the 'Waiting for mac to connect' box displayed. Mac is connected to wi-fi OK as able to use Safari and access internet. Any ideas, please?

    Thanks for your suggestions. Have managed to get Migration Assistant working but now have a new problem, i.e. where does it save the transferred files?!! Searched a few forums and it seems it saves it under your old username, or suchlike. Anyway I tried logging on as a new user using my old user name but there were only a handful of files there, couldn't locate the majority of stuff from my old laptop. Anyway I don't intend to go through any more hoops with MA - will just save the important stuff to an external drive and transfer it that way. Not impressed with MA at all. I thought it was supposed to be a user-friendly tool to simplify the transfer from pc to Mac - not my experience, I'm afraid!

  • I have my Calendar app syncing with iCloud.  Every time I open it it says, "Moving Calendars to Server Account..."  It runs and runs and does not stop.  As a result, I cannot access my calendars.  Please help.

    I have my Calendar app syncing with iCloud.  Every time I open it it says, "Moving Calendars to Server Account..."  It runs and runs and does not stop.  As a result, I cannot access my calendars.  Please help.

    I have the same problem, I tried the solution of Dr Cox but that didn't work as he said go to system preference then mail, contacts etc. but I don't have that.  Can someone help?
    Elaine

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

    I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
    However...
    I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
    I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
    The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
    Any help please on this would be appreciated!
    Pete

    See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
    tt2

Maybe you are looking for