While booking the parts to own stock

Hi,
Need urgently the part 123456 from vendor managed inventory 123456789 to complete orders.
Trying to book the parts to own stock -getting an error message
> Pur. info rec ######## pur org is flagged for deletion
> Consignment movement posted without value
Thanks

REmove deletion indicator from info record and maintain a valid price in the info record.

Similar Messages

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

How to find all the parts used from stock for 1 machine

Dear Sap community,
I'm trying to find all the spare components that are used for 1 specific machine.
If I look in the work orders under components it only gives the components that are orderd.
But I would like to find the components that come out of stock. I asked the stockkeeper and he said he writes it all in the work orders but we can't find it back.
It would be nice to just find it on the work order but it would be easier if I could just choose a machine and then find all the spare parts used from stock.
So my question is can I find all the spare parts used for 1 machine or just find the spare parts in the work order?
Thank you for any help you can provide in this situation,
Michael Claes

Hi,
In addition to puneet's information:
Training and Event Mgmt infotypes:
    Prices (Infotype 1021)
    Availability Indicators (Infotype 1023)
    Capacity (Infotype 1024)
    Depreciation Meter/Validity (Infotype 1025)
    Business Event Info (Infotype 1026)
    Site-Dependent Additional Info (Infotype 1027)
    Address (Infotype 1028)
    Business Event Type Info (Infotype 1029)
    Procedure (Infotype 1030)
    Mail Address (Infotype 1032)
    Name Format (Infotype 1034)
    Schedule (Infotype 1035)
    Costs (Infotype 1036)
    Billing/Allocation Info (Infotype 1037)
    Business Event Blocks (Infotype 1041)
    Schedule Model (Infotype 1042)
    Demand (Infotype 1060)
    Web Link (Infotype 1061)
    Knowledge Link (Infotype 1062)
    Business Event Group Info (Infotype 1063)
Thanks,
Anil.G

Configurator Error- Warning while booking the Sales Order

Hello All,
I am working on Order Management. When i try to book the order using (wf pkg) some times it is throwing an error saying "Configurator error" But when i open the configurator its not a Error message, its jsut a Warning. So, i have to manually click on the CONFIGURATOR, clicking on PREVIEW Configurator, and FINISH Button each time.
Is there any API which can ignore this warning and proceed with Booking the order automatically. (Unless there is an Error, not the warning)
It would be really helpful for me, as i am doing this manually, almost 100 Orders daily.
Thank you,
Aush

You are probably getting the error because the order selections were not valid and therefore you could not book the order.
When you open the configurator and click finish, it may APPEAR that you did not do anything. But in reality, when you click Finish, your selections are changing. Some of the selections are done automatically by rules so some of your incorrect selections are getting fixed by simply opening the configurator and clicking on Finish.
You can verify that by opening the configurator but instead of Finish, click on Cancel. And then try to book the order. You will probably get an error because you did not let the auto-rules fix the errors in your order.
If you want to avoid doing this 100 times a day, you need to look at the process that is creating the order lines in ENTERED state. Your problem is somewhere there.
Hope this helps,
Sandeep GAndhi

Getting errors while booking the orders.

hello all,
please can any one help on following errors while boking the orders.
1)invalid header id
2)orkflow activity Schedule has failed. Please fix the errors and retry the activity from the Order Form or the Workflow Monitor.
3)ORA-01403: no data found.
what might be the cause for these errors.
Please help me
Thank You.

Hi
This error is due to wrong apps initilaization in the code.
thank you.

SAP LSO course date while booking the courses

Hi All,
We have a requirement as follows.
We have a course name as SAP HR Training , course date as 01.08.2014, no of participants as 25 and course sign on date(last date till which courses can be booked) as 23.07.2014.
The booking for a course can be done till the course sign on date and not afterwards.
Do we have any standard configuration settings in SPRO where we can find the course sign on date or any date which we can use to prevent the booking of courses after a certain date.
Thanks,
Aditi

Hi Aditi
Please check if BADI LSO_CHECK_BOOKING can be of your help in this case.
Regards
Chetan

Transfer Posting from Own stock to customer stock

Hi ,
I have two storage location. Now i wanted to transfer stock from one storage location to other , but while transferring the stock should be received against a sales order in the receiving storage location.
For e.g.. i have a storage location in the plant and another one in port. I want to transfer stock from the plant one to the port one.So when the goods are received in Port storage location it is received against a sales order that is booked against a sales order. can this be done?
how to do this?
ram.

try it with movement type 412, I can enter a receiving storage location different from the issueing storage location while doing the transfer posting own to customer stock

Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

"There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
PC - W7 Pro 64 bit, 16GB RAM etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>

While creating the Transfer Order system is not picking Sale order stock?

Hi All,
In the B2B process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
Regards.

C S Javali
Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
Regards
Pradeep

I'm having some trouble transferring audio books to my iPhone. It usually takes 3 or 4 tries to get all the parts transferred. I didn't use to have this problem - all parts would transfer in one try.

I'm having some trouble transferring audio books to my iPhone. It usually takes 3 or 4 tries to get all the parts transferred. I didn't use to have this problem - all parts would transfer in one try.

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

Error while loading the planning book

Hi There,
I am getitng the below error while loading the data in planning book
"Error for COM routine using application program (return code 40,016)
Error reading data - Planning book cannot be processed further"
Ran /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_LCM_REORG but its not working , still getting the same error.
Could you please advise?
Thanks,
Krishna

Hi Krishna,
Looks like a key figure might be incorrectly created or there might be a problem in aggregation/disaggregation of key figures due to numerous number of CVCs.
Regards
JB

ERROR WHILE POSTING THE STOCK OF MATERIAL

Dear experts
while posting the stock of material iam getting the error 'number ranges for transevent type WA in year 2011 does not exist.
what transaction should be used .
Thanks & Regards.
Erfan.

Dear,
First of all please go to T-code FBKP, click on Document Type, double click on document Type "WA" and check what is the value in Number Range.
For Example there it is 01, then got to FBN1, enter company code and give give 01 and against this maintain number.
Hope this helps!!!
Br,Vivek

Error while Releasing the Stock from Quality-CRTD CHCR SPRQ

Hai Experts
While releasing the stock from Quality i got error like function cannot be caried out,
The Material Status CRTD CHCR SPRQ.
Thanks
Rajakarthik

Rajakarthik
It looks like the status you mentioned are of inspection lot.
CRTD mean created status of inspection lot.
CHCR means characterstics required. in your case the the material master inspection view says characterstics required however your inspection plan does not have any cahracterstics.
assign the characterstics to inspection plan & both the status of inspection lot will change. you will be then able to process the inspection lot to move the stock from quality to unrestricted.
Regards
Mahesh

While doing the backup via iTune, my contacts in iPhone AND iPad have been completely wiped out. They are still all available on my Address Book on my Mac. Any idea what happened and how to resolve this ?

While doing the backup via iTune, my contacts in iPhone AND iPad have been completely wiped out. They are still all available on my Address Book on my Mac. Any idea what happened and how to resolve this ?

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

While booking the parts to own stock

Similar Messages

Maybe you are looking for