While charging through usb port i am getting small shock at the edges of my iphone 5??why is this?

I am getting small shock when charging my iphone 5 through usb port?why is this??any solutions??

Bring the phone and USB cable to Apple for evaluation

Similar Messages

  • Charging through USB - load on PSU quest

    I have never used anything which charges through USB before, and tbh, would not have bought the zen micro had I known it didnt come with an adaptor (i'm very suspicious of the whole charging through USB thing)
    So I guess I want some reassurance. I have a 600w PSU, hooked up to a DFI lanParty UltraB, g Ram, 9800PRO gfx card (which has it's own molex connector from the PSU), audigy2, 2 internal HD's, 2 CD/DVD dri'ves and my case is a Lian Li fishtank, with UV spotlights, air pump, blue and UV cold cathodes and I use an air extractor to cool my gfx card.
    So - is the Zen in any danger of overloading my PSU and frying my system? Other USB devices I have - Saitek Eclipse KB, Logitech G5 mouse, Wacom Graphire3, Iomega external powered harddisk and Griffin Powermate.
    is it a risk or am I being paranoid?

    plec: The USB standard allows for a 500mA current (small) to be supplied to any device using a USB port. The Micro or any player that charges via USB will only use that amount to charge as well as sharing with the data connection. You can dedicate all that 500mA to charging the player if you use the latest ..0 or 2.20.05 firmware, then slide the power button to lock the player before connecting to the PC.
    Don't panic, it's not going to overload your PC as the current drain is USB standard and small.

  • TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

  • My iPad2 getting problem while charging through charging adaptor it's getting on off consist sly please hep me in this regard

    My iPad2 getting problem while charging through charging adaptor it's getting on off consist sly please hep me in this regard

    My iPad2 getting problem while charging through charging adaptor it's getting on off consist sly please hep me in this regard

  • How do I get iTunes output through USB port ?

    How do I play iTunes through USB Port ?

    Have you updated both Airport Express units to the latest firmware?

  • My iPhone 5 suddenly stopped getting charged via USB port.

    Does anyone know how to reset this so I can start charging via USB port again?

    Hello beenafromgbr,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting iPhone, iPad, and iPod touch accessories.
    http://support.apple.com/kb/ts2634
    Best of luck,
    Mario

  • Why MY ipad don't charge on usb port, on Macbook pro

    why MY ipad don't charge on usb port, on Macbook pro

    Because the port you're using just isn't putting out enough juice. The Power Adapter which came with your iPad puts out 2A of charging current, while the most powerful USB port on any computer is going to be putting out 500mA at most (and many brands, especially PC laptops, put out considierably less).
    That's why your User's Guide recommends you use the Power Adapter.

  • How can i use labview for communicating with pic18 microcontroller through usb port?

    Hi all,
    I want to make a DAQ card using pic 18 microcontroller which has a built-in usb protocol. I have the firmware of this
    controller which will  make it as a usb device. How can i receive the analog voltages from this DAQ card in Labview? or i mean to say that how i can communicate labview with the Pic 18 microcontroller through usb port? I have also the
    mpusbapi.dll file which is for Visual C++. Can i make changes in this dll file to make it compatible with labview?

    Which labview version do you have. Up to labview 7.1 it was no USB raw communication options. I have heard it did not work well in 7.1, but from 8.x most of the errors were fixed.
    Here is a link it should be useful http://forums.ni.com/ni/board/message?board.id=170&message.id=340676&query.id=365864#M340676
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

    Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

    Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

  • Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    jrburrows wrote:
    Ok, fair enough.  But since Job's death - Apple's control on leaks has been terrible.  I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones.  Because of the vast ammount of leaks.  With the iPad mini leaks, it's 99% sure to come out next week.
    Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
    Amd by "others" I meant other people on iPads - not other devices/manufacturers.  It's possible to do so, I just want to know how.  I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
    No, USB is not the future, you missed the memo about cloud and wireless computing?

  • Battery charging by usb port on PC and adapter which is better

    Please help me
    Battery charging by usb port on PC and adapter (enclosed with IPHONE box )which is better?
    Regards

    Adapter is probably quicker as you have slightly better power than from a USB socket

  • Charging through USB

    can someone tell me how to charge through USB? i've got a muvo2 fm and it says u can charge it through USB but i donno how to or yeah any help aprreciated
    cheers

    Jason-CL wrote:brendan23, We do have player that are charging and doing file transferring at the same time. Like the Zen Micro and MuVo Slim player though it's not on all our player. Last, glad that helps Jason
    Are the other players NOT charging when connected to usb? Weird i thought they all did.. Glad i chose the Micro thenn

  • Xperia L is not charging through USB cable

    HI My Xperia L is not charging through USB cable,i am using original USB cable which is provided by the company in the box, But it was charging through Wall charger.. How can solve this problem

    Step one: pull out the battery Step two: Short the terminals of battery. SImply licking the golden connectors would do so. You would feel salty taste Step three: reinsert the battery and let it charge Magic just happened

  • I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!

    I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!

    You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
    The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
    Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.

  • HT2188 my ipad is stuck on itunes  showing the usb lead and cant get off it touch the screen nothing happens

    my ipad is stuck on itune showing the usb cable but cant get it off

    After a trip to the Apple Store with this problem, I found out that USB connections have different levels of power.  Try changing USB ports, then look for iTunes to recognize the iPad is connected.  Good luck!

Maybe you are looking for

  • Error for Goods receipt

    Hi All, I tried to post goods receipt against a Purchase Order. When i complete all the details as per messages and check the document it says document is OK. When I go to save the document it hives error as " Field text is required for "CoCode" "G/L

  • How can I install window 7 on my Macbook?

    My Macbook is at Lion 10.7.3 and now I want to install window7 on My Macbook through BootCamp. How can I do that? Intruct me please. Thanks

  • Start GP Process through Webdynpro using GP APIs

    Hello, I am using GP APIs to start my process programatically in webdynpro using the link : http://help.sap.com/SAPHELP_NW70EHP1/helpdata/EN/33/198141f906040de10000000a1550b0/frameset.htm The first screen is a Webdynpro For Java Callable Object which

  • Inforecord value not picking in po

    Dear friends,              this is chandra shekar , here i have a problem with inforecord that in inforecord the price is 100 for that discount is 2 % that means the mat price is 98 rupees ok but when i'm creating po the system is picking only 100 ru

  • Recovery after Rootkit Compaq 6710b

    Hello- I recently had to restore a Compaq 6710b after it became infected with a rootkit. I formatted the hard drive and downloaded the disk driver to do this. It now runs an extremely minimal version of XP, but many of the features I am used to are m