While checking the plant in SPRO data is not displayed on the screen.

hi dear all frnds,
i am facing the problem in SPRO customization, the screen is showing the blank and dataless when i click on
Define, copy, delete, check plant field.
pls. help me to come out from this prob.
thnx in advance.
bst rgds,
rajesh

Hi,
You mean you are getting organizational object plant with all icons below it for change copy and all.
From the list,
Select structure --> navigation --> say tick to all.
You will get the list of plants.
Cheers,
Sridhar

Similar Messages

Error while checking the rate data through installation

Hi everyone,
I am facing an error message while checking the rate data for an installation:
"Internal error: Error when reading internal table IEGER in ISU_O_DEVICERATE_OPEN".
Please guide.
Thanks and Regards

Hi,
The error comes from FM ISU_O_DEVICERATE_OPEN include LEG70F40 line number 2555.
It is giving error on following code of line in FM.
      find the serialno.
        loop at ieger into eger_wa
          where equnr = reg_wa-equnr
          and   ab   <= reg_wa-ab
          and   bis >= reg_wa-ab.
          exit.
        endloop.
        if sy-subrc <> 0.
          perform close_object changing obj.
          mac_msg_put 'E890(E9)' 'IEGER' 'ISU_O_DEVICERATE_OPEN'
                                 space space input_error.
          if 1 = 2. message e890(e9) with ' ' ' ' ' '. endif.
        endif.
I think that you are not checking the active installation. Check whether that installation has proper ebtry in table EASTS.
Try changing
BIS     BISZEITSCH     DATS     8     0     Date at Which a Time Slice Expires
AB     ABZEITSCH     DATS     8     0     Date from which time slice is valid
data for the installation.
If this dosent work then debug the program by putting break point on the mentioned line and check.
Regards,
Pranaya

Error while checking the command ttcwadmin -status

Hi
Getting error while checking the status of timesten cluster agent
Any clue
[ttadmin@VFS1UUP02 bin]$ ttcwadmin -status
TimesTen Cluster status report as of Wed Jun 26 15:03:42 2013
(ttCWAdmin:) crsctl.c(715): TT48004: clsssinit failed with status = 3.
*** glibc detected *** /timesten/tt1122/TimesTen/tt1122/bin/ttCWAdminCmd: double free or corruption (out): 0x00007fffcc7c6b00 ***
======= Backtrace: =========
/lib64/libc.so.6[0x34b14760e6]
/lib64/libc.so.6[0x34b1478c13]
/timesten/tt1122/TimesTen/tt1122/lib/libttcrs.so(crsAgentCtl+0xa6e)[0x7f6f32b71316]
/timesten/tt1122/TimesTen/tt1122/bin/ttCWAdminCmd[0x4062be]
/timesten/tt1122/TimesTen/tt1122/bin/ttCWAdminCmd[0x402784]
/lib64/libc.so.6(__libc_start_main+0xfd)[0x34b141ecdd]
/timesten/tt1122/TimesTen/tt1122/bin/ttCWAdminCmd[0x4020ca]
======= Memory map: ========
00400000-0040c000 r-xp 00000000 fd:0f 263189                             /timesten/tt1122/TimesTen/tt1122/bin/ttCWAdminCmd
0050b000-0050e000 rw-p 0000b000 fd:0f 263189                             /timesten/tt1122/TimesTen/tt1122/bin/ttCWAdminCmd
0050e000-00510000 rw-p 00000000 00:00 0
00906000-009a4000 rw-p 00000000 00:00 0                                  [heap]
34b0c00000-34b0c20000 r-xp 00000000 fd:07 135526                         /lib64/ld-2.12.so
34b0e1f000-34b0e20000 r--p 0001f000 fd:07 135526                         /lib64/ld-2.12.so
34b0e20000-34b0e21000 rw-p 00020000 fd:07 135526                         /lib64/ld-2.12.so
34b0e21000-34b0e22000 rw-p 00000000 00:00 0
34b1000000-34b1002000 r-xp 00000000 fd:07 135534                         /lib64/libdl-2.12.so
34b1002000-34b1202000 ---p 00002000 fd:07 135534                         /lib64/libdl-2.12.so
34b1202000-34b1203000 r--p 00002000 fd:07 135534                         /lib64/libdl-2.12.so
34b1203000-34b1204000 rw-p 00003000 fd:07 135534                         /lib64/libdl-2.12.so
34b1400000-34b158a000 r-xp 00000000 fd:07 135527                         /lib64/libc-2.12.so
34b158a000-34b1789000 ---p 0018a000 fd:07 135527                         /lib64/libc-2.12.so
34b1789000-34b178d000 r--p 00189000 fd:07 135527                         /lib64/libc-2.12.so
34b178d000-34b178e000 rw-p 0018d000 fd:07 135527                         /lib64/libc-2.12.so
34b178e000-34b1793000 rw-p 00000000 00:00 0
34b1800000-34b1817000 r-xp 00000000 fd:07 135532                         /lib64/libpthread-2.12.so
34b1817000-34b1a17000 ---p 00017000 fd:07 135532                         /lib64/libpthread-2.12.so
34b1a17000-34b1a18000 r--p 00017000 fd:07 135532                         /lib64/libpthread-2.12.so
34b1a18000-34b1a19000 rw-p 00018000 fd:07 135532                         /lib64/libpthread-2.12.so
34b1a19000-34b1a1d000 rw-p 00000000 00:00 0
34b2000000-34b2083000 r-xp 00000000 fd:07 131322                         /lib64/libm-2.12.so
34b2083000-34b2282000 ---p 00083000 fd:07 131322                         /lib64/libm-2.12.so
34b2282000-34b2283000 r--p 00082000 fd:07 131322                         /lib64/libm-2.12.so
34b2283000-34b2284000 rw-p 00083000 fd:07 131322                         /lib64/libm-2.12.so
34b4000000-34b4016000 r-xp 00000000 fd:07 135243                         /lib64/libnsl-2.12.so
34b4016000-34b4215000 ---p 00016000 fd:07 135243                         /lib64/libnsl-2.12.so
34b4215000-34b4216000 r--p 00015000 fd:07 135243                         /lib64/libnsl-2.12.so
34b4216000-34b4217000 rw-p 00016000 fd:07 135243                         /lib64/libnsl-2.12.so
34b4217000-34b4219000 rw-p 00000000 00:00 0
34b4800000-34b4816000 r-xp 00000000 fd:07 135531                         /lib64/libgcc_s-4.4.7-20120601.so.1
34b4816000-34b4a15000 ---p 00016000 fd:07 135531                         /lib64/libgcc_s-4.4.7-20120601.so.1
34b4a15000-34b4a16000 rw-p 00015000 fd:07 135531                         /lib64/libgcc_s-4.4.7-20120601.so.1
7f6f2d4f0000-7f6f2d513000 rw-p 00000000 00:00 0
7f6f2d513000-7f6f2d515000 r-xp 00000000 fd:10 2104758                    /u01/app/11.2.0/grid/lib/libskgxn2.so
7f6f2d515000-7f6f2d614000 ---p 00002000 fd:10 2104758                    /u01/app/11.2.0/grid/lib/libskgxn2.so
7f6f2d614000-7f6f2d615000 rw-p 00001000 fd:10 2104758                    /u01/app/11.2.0/grid/lib/libskgxn2.so
7f6f2d615000-7f6f2dcdf000 r-xp 00000000 fd:10 2104742                    /u01/app/11.2.0/grid/lib/libhasgen11.so
7f6f2dcdf000-7f6f2ddde000 ---p 006ca000 fd:10 2104742                    /u01/app/11.2.0/grid/lib/libhasgen11.so
7f6f2ddde000-7f6f2de00000 rw-p 006c9000 fd:10 2104742                    /u01/app/11.2.0/grid/lib/libhasgen11.so
7f6f2de00000-7f6f2de06000 rw-p 00000000 00:00 0
7f6f2de06000-7f6f2dead000 r-xp 00000000 fd:10 2104735                    /u01/app/11.2.0/grid/lib/libocr11.so
7f6f2dead000-7f6f2dfad000 ---p 000a7000 fd:10 2104735                    /u01/app/11.2.0/grid/lib/libocr11.so
7f6f2dfad000-7f6f2dfb0000 rw-p 000a7000 fd:10 2104735                    /u01/app/11.2.0/grid/lib/libocr11.so
7f6f2dfb0000-7f6f2e053000 r-xp 00000000 fd:10 2104718                    /u01/app/11.2.0/grid/lib/libocrb11.so
7f6f2e053000-7f6f2e152000 ---p 000a3000 fd:10 2104718                    /u01/app/11.2.0/grid/lib/libocrb11.so
7f6f2e152000-7f6f2e154000 rw-p 000a2000 fd:10 2104718                    /u01/app/11.2.0/grid/lib/libocrb11.so
7f6f2e154000-7f6f2e15f000 r-xp 00000000 fd:10 2104764                    /u01/app/11.2.0/grid/lib/libocrutl11.so
7f6f2e15f000-7f6f2e25f000 ---p 0000b000 fd:10 2104764                    /u01/app/11.2.0/grid/lib/libocrutl11.so
7f6f2e25f000-7f6f2e260000 rw-p 0000b000 fd:10 2104764                    /u01/app/11.2.0/grid/lib/libocrutl11.so
7f6f2e260000-7f6f2e261000 r-xp 00000000 fd:07 132252                     /lib64/libaio.so.1.0.1
7f6f2e261000-7f6f2e460000 ---p 00001000 fd:07 132252                     /lib64/libaio.so.1.0.1
7f6f2e460000-7f6f2e461000 rw-p 00000000 fd:07 132252                     /lib64/libaio.so.1.0.1
7f6f2e46c000-7f6f30a3e000 r-xp 00000000 fd:10 2104660                    /u01/app/11.2.0/grid/lib/libclntsh.so.11.1
7f6f30a3e000-7f6f30c3d000 ---p 025d2000 fd:10 2104660                    /u01/app/11.2.0/grid/lib/libclntsh.so.11.1
7f6f30c3d000-7f6f30dd3000 rw-p 025d1000 fd:10 2104660                    /u01/app/11.2.0/grid/lib/libclntsh.so.11.1
7f6f30dd3000-7f6f30df8000 rw-p 00000000 00:00 0
7f6f30df8000-7f6f31081000 r-xp 00000000 fd:10 2104768                    /u01/app/11.2.0/grid/lib/libnnz11.so
7f6f31081000-7f6f31180000 ---p 00289000 fd:10 2104768                    /u01/app/11.2.0/grid/lib/libnnz11.so
7f6f31180000-7f6f311c2000 rw-p 00288000 fd:10 2104768                    /u01/app/11.2.0/grid/lib/libnnz11.so
7f6f311c2000-7f6f311c4000 rw-p 00000000 00:00 0 Aborted (core dumped)
Regards
Siva Kumar

The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
The only disks created are
[root@SFV9699 dev]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
And these disks are showing part of that group also.. Not quite sure how this happened..
what abt dropping this group.. will anything work.

TF244069: An error occurred while checking the provisioning status of the reporting database schema for a PWA instance.

The command TfsAdmin ProjectServer /RegisterPWA causes next error:
TF244069: An error occurred while checking the provisioning status of the reporting database schema for a PWA instance.
Project Server returned the following error: "Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized.".
(type ProvisionException)
Exception Stack Trace:    at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionPwaDBSchema.HandleSoapException(SoapException soapException, String errorResourceString)
   at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionPwaDBSchema.IsDBSchemaProvisioned()
   at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionManager.Provision()
I installed SharePoint 2013 and Project Server 2013 as farm and TFS 2012 and my account has permissions everywhere. I read article
http://msdn.microsoft.com/en-us/library/gg412653.aspx and gave full permissions for TFS account to SQL and Project, Project app pool account to SQL, but still have an error.
How can I find out what exactly permissions are not enough???

The problem was in claims authentication. Changed to Windows and all worked out.

CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
Seb

Hi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hi. My phone screen broke and I had it replaced from a phone shop. The guy said that while changing the screen and phone was blocked. It is now disabled for like 23,000,000 minutes and I can't restore it cause I dont have all the data sync to my computer.

Hi. My phone screen broke and I had it replaced from a phone shop. The guy said that while changing the screen and phone was blocked. It is now disabled for like 23,000,000 minutes and I can't restore it cause I dont have all the data sync to my computer. Is there anything I can do or can Apple do something if I give them the correct password?

As you had the iPhone opened by an unauthorised repairer ( Apple do not replace screens on iPhone 4)
Apple will not provide any service or support
Take it back to the "phoneShop" and tell them to fix it
You have no other alternatives
or try this
http://support.apple.com/kb/HT1212

Taking a screenshot while touching the screen with iOS6

Hello,
Ever since I updated my iPhone 4S to the new iOS6 I noticed I can't take screenshots while touching the screen, for example - if I want to take a screenshot of a text message while rolling up the screen (so that only a certain part of the screen will be in the picture) I can't do it - the screenshot saved would be of the whole screen. Same goes with every application (Whatsapp, Snapchat etc.).
Does anyone know what can I do? Is it a problem with my device, or is it some kind of a bug in the iOS6?
Thanks ahead.

Your cellular or wireless may have dropped when the call came in. Especially when driving.
Cheers

HT5137 My Ipad's screen is not react my touch commands, while in the screen the time and battery information is shown and working.

My Ipad's screen is not react my touch commands, while in the screen the time and battery information is shown and working.
It is not even swiched off. the button in the right above side caanot do it. Could you please, help me as soon as possible.

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Korean data is not displaying in BI system

Hello BI Experts,
Do you have any idea or some settings in BI system as korean data is not displaying in BI ODS, while source system in correct data. Korean data is displaying # value in PSA and ODS.
Thanks,
Sapna

hi,
as mentioned in earlier post ,you need to have your system unicode enabled,
check in menu -> system->status...in your BW system field called unicode system
Also try running program program RSCPINST - which is used to set the language setting to load the data.
if the chain language setting is not maintianed for loading :
click on Add button ->Key :KO and Language :korean->save it
try to load the data again and check it
hope it helps
regards
laksh

Numeric data is not displayed in BI Publisher 11g report

Hi,
I'm using Oracle BI 11g (11.1.1.6.0).
I'm experiencing a serious issue with numeric data in reports created with Publisher.
When I define the query in the data model, numeric data gets declared as "integer" (even if it should be "double"). Anyway, when creating the layout all data is correctly shown.
The issue emerges when I run the report in interactive mode: numeric data is not displayed at all.
If I run it in HTML mode or other, I get proper results.
I tried to explicitly CAST numeric data in the query to number(21, 6) but I get no different result.
Any help or suggestion is warmly welcome.
Thanks,
Cristina

Yes, assuming that you are using the Standalone version, following are some excerpt from user guide.
10g see Oracle® Business Intelligence Publisher
Report Designer's Guide
Release 10.1.3.4
Part No. E12187-01
Chapter 6 Building a Data Template
Supported Column Types
CLOB (conditionally supported)
The CLOB must contain text or XML. Data cannot be escaped inside the CLOB column.
And for 11g see
Oracle® Fusion Middleware
Data Modeling Guide for Oracle Business Intelligence Publisher
Release 11g (11.1.1)
Part No. E18862-01
Chapter 3 Creating Data Sets
Using Data Stored as a Character Large Object (CLOB) in a Data Model
BI Publisher supports using data stored as a character large object (CLOB) data type in
your data models. This feature enables you to use XML data generated by a separate
process and stored in your database as input to a BI Publisher data model.
Use the Query Builder to retrieve the column in your SQL query, then use the data
model editor to specify how you want the data structured. When the data model is
executed, the data engine can structure the data either as:
• a plain character set within an XML tag name that can be displayed in a report (for
example, an Item Description)
• structured XML
Cheers,
ND

Navigational Attribute data is not display in Cube level and reporting

Hello ALL
Iam facing a problem like,I created Navigational attribute and I selected that navigational attribute in cube level also but data is not display in cube level.
What will be the problem?Pl help me out.
regards
balaji

Hi Dinesh
You mean base characteristic means loading data after creating Navigational attribute?Is it this way,(orelse can u tell me about this base characterstic)
Yes after making that particular attribute as a navigational attribute I loaded data in master data tables.
How to run Attribute change run?can u give me steps
regards
balaji

Error while checking the status of Oracle Cluster ware

Hi
I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
-bash-3.2$ ./crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
-bash-3.2$
But when I ran below one:
-bash-3.2$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE sfv9699 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE sfv9699
ora.crf
1 ONLINE ONLINE sfv9699
ora.crsd
1 ONLINE OFFLINE
ora.cssd
1 ONLINE ONLINE sfv9699
ora.cssdmonitor
1 ONLINE ONLINE sfv9699
ora.ctssd
1 ONLINE ONLINE sfv9699 OBSERVER
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE sfv9699
ora.evmd
1 ONLINE INTERMEDIATE sfv9699
ora.gipcd
1 ONLINE ONLINE sfv9699
ora.gpnpd
1 ONLINE ONLINE sfv9699
ora.mdnsd
1 ONLINE ONLINE sfv9699
So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
Alert <server_name>.log
2012-10-20 15:37:51.408
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:52.968
[crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:52.984
[crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:53.471
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:53.472
[ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
CRSD.log
2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[   CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.969: [    GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
2012-10-20 15:37:52.978: [ OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprinit: Could not open raw device
2012-10-20 15:37:52.981: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.983: [ OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
2012-10-20 15:37:52.984: [ CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [    CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
2012-10-20 15:37:52.984: [    CRSD][3563381328] Done.
=======================
I see in the above log that saying ASM instance is down and failed to open +DATA .
But the asm instance up and running
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
+ASM1            STARTED
And we havent created any disk named DATA before the installation. We have created only below two disks
SQL> select name,header_status from v$asm_disk;
NAME HEADER_STATUS
ASM_DATA MEMBER
FLASH_RECOVERY MEMBER
But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
SQL> select name,state from v$asm_diskgroup;
NAME STATE
DATA MOUNTED
Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
[root@SFV9699 bin]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
Seems like its trying to read the old disk DATA.
we have done asmscanning too with oracleasm scan disks. but no use.
Where I can remove the old entry of DATA disk.
It would be a great if a quick response get.
Thanks
SHIYAS M

The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
The only disks created are
[root@SFV9699 dev]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
And these disks are showing part of that group also.. Not quite sure how this happened..
what abt dropping this group.. will anything work.

Portal Runtime Error while checking the Transaction in Portal

Hi all,
We r in the phase of setting the configuration of Portal. We did the the template installer but when iam checking the transactions in Portal ( System Administration--> Support--->SAP Apllication) , it is throwing me the following error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Missing Property 'ClassName' in property file for layer'Transaction/WinguiSSOLayer'..
See the details for the exception ID in the log file
Can anybody help me in this regard.
Thank in Advance.

Hi Niyati,
I guess check through -->
Under "Personalize > User Profile" the checkbox "Activate Accessibility Feature" must be unchecked!
as, people earlier also faced this issue and SAP provided this solution.
Also an alternative solution for this is like --
Go to:
<Drive>\usr\sap\<SID>\JC<Instance No.>\j2ee\cluster\server<Server No.>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\property\Transaction
and see the content of the 'WebGuiSSOLayer.properties' file.
One of the entries is ''ClassName'. The value on a 'valid' portal is: com.sapportals.portal.sapapplication.itsdetection.ITSDetectionLayer
If it's not the case, then go to:
<Drive>\usr\sap\<SID>\JC<Instance No.>\j2ee\cluster\server<Server No.>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
rename the file 'com.sap.portal.appintegrator.sap.par.bak' to 'com.sap.portal.appintegrator.sap.par' open the par file and edit the file ''WebGuiSSOLayer.properties' (add the relevant entry for ClassName).
Save the file (still with the par extension)
Restart the portal (if everything is OK then the bak extension will be added to the filename).
Just try this, hope it works.
Reward points if helpful
Regards,
Shailesh Nagar
Edited by: Shailesh Kumar Nagar on Jan 22, 2008 7:16 AM

Am not able to open photoshop now, please check the screen shot. It showing "up to date" ??

Hi I unistalled my creative cloud and installed adobe cs5 tools (including photoshop and all) then i uninstalled that and again installed "creative cloud" but from that moment i am getting this message above photoshop app "up to date" .Please check the attached image. Previously am able to click and open photoshop app but now am not able to click there.

Is Ps present in /Applications or not?
If not then please Run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
Restart your system and then try installing Ps again.
Regards,
Ashutosh

Error while checking the flow of bpel process in bpel console

Hi Experts
I have created one bpel process which invokes task manager for approving or rejecting the leave request. I ve successfully deployed the bpel process and also able to test approve or reject the leave request . But i am facing one error
when i am initiate a bpel process and started to check the flow of that bpel process in bpelconsole it gives me some error message in small pop up like
error : Internal/ bug ( #589 )
\u017E is not defined
i click Ok and after this no error and all working well.
Thanks.

A quick answer is:
1. make sure you defined the Application/Integration Server in your developer (user/pass you have - if not oc4jadmin then one the IT gave you).
2. Deploy your project to that server.
3. Choose the correct domain in the Console when deploying.
Is this what you wanted to know???

While checking the plant in SPRO data is not displayed on the screen.

Similar Messages

Maybe you are looking for