While closing the application, I hope we press home button twice and then just push upward the particular application which we would like to close in iOS 7, Ryt? But sometimes the screen of the particular application is not seen bit the icon alone shown?

Kindly Read my question.

I have heard of this before. Apparently, the guys at the Apple Store and some employees claim it is simply a bug but will be fixed in the near future. If it bothers you that much, just close and reopen multitasking.

Similar Messages

How do I turn off open apps? You use to be able to press the home button twice and then hold the app icon until is vibrated and then turn it off.

How do I turn off open apps? You use to be able to press the home button twice and then hold the app icon until is vibrated and then turn it off.

WOW - Can't this be a flashing message in the forums since it's been asked about a 1,000 times now.

TS3367 when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. sugges

when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. suggestions??
i have also tried facetiming with several other people. the same thing has hapened every single time and it has always worked just fine until that 800 number called me.

Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
http://www.apple.com/support/systemstatus/

I just purchased a iphone 4s. Now I would like to sync it to my PC but first need to upgrade to 10.5 or higher. I can not update my current version I get an error windows installer failed to ...... what can I do?

I want to sync my new iphone4S to my PC XPS Dell, window 7, 64bit. I have tried repeatedly but always get the error message: Windows installer has encountered a problem and can not install program ( or something close to that).
What can I do? It is a brand new laptop and have have already been working with a older version itunes and can sync my touch without problems.
Please help!! I do not want to lose all of my songs and apps> Thanks Chris

It would help to post this in a more proper form. This is for the iTunes family of stores.

Press home button once and Siri pops up

I don't know but it just started happening yesterday. Everything I press on the home button Siri pops up and I have to play and slowly tap the home button to get to my home page and even to get to multitasking. I already tried a soft reset and it didn't change anything . Should I go to the apple store? Or is there a fix I can do? Thank you in advance.

Setup new iPad
1. Turn on iPad
2. Set Language; tap arrow on top right
3. Set Country; tap Next
4. Enable Location Service; tap Next
5. Setup WiFi (connect to internet)
6. Setup as new; tap Next
7. Sign-in with Apple ID
8. Agree with Apple Terms and Conditions
9. Enable iCloud
10. Enable Find My iPad
11. Register iPad
12. Start using iPad

I just recieved an iPad mini iOS 7 and currently use an Android 2.2 phone which I would like to share stuff by way of bluetooth. It says that they are paired, but won't connect. Are they not compatible? Or is there some app that makes it work?

I have been able to pair them, but they wont' connect. Is there a compatibility issue? Or is there some app that I can get to make it work?

iOS does not support file sharing over BT. To the best of my knowledge, there are no apps that will allow sharing from iOS to Android over BT but, I could be wrong.
You can use a service such as DropBox. Or just email things.
Best of luck.

HT201335 I tapped the home button twice, saw the apps, scrolled left to right, still do not see the air play icon

I am trying to mirror my iPad 2 with my Apple TV . I hit the home button twice, scrolled through the app icons but still do not see the air play icon? I did check to confirm that both devices are on the same network.

Yes they are both on the same network and I enabled air play on the TV. I finally located the icon on my iPad last night and succeeded in mirroring. It seems the instructions from apple were confusing me. They said tap the home button twice and then scroll to the right. The icon however is on the left side of the screen and shows as what I would call a button as opposed to an icon, located among the buttons of a mini player. Anyway, found it last night and now am enjoying the mirroring feature. Thanks for all the help.

White screen when pressing home button and getting text

Strange thing, hopefully software bug. I press the home button to check time and all that shows is a white screen. It's not the white screen of death because I can simply press the sleep button and then go straight back to what I was doing, pressing home button, etc. and it's fine. I've even taken a screen shot of it with iPhone. All that appears is my true wallpaper, as if it didn't know it wasn't already showing it. Also, it's very random. I can't reproduce. It's pretty minor as I can quickly getout of it but I want it clean.
I've restored, restored as new, reset, turned on/off, everything I can think of. Any ideas?
I also have the speaker distortion bug many are talking about (blown speaker sound).
I have a genius bar appointment Sunday so I'm curious what they say.

I suggest going through the usual troubleshooting steps:
1. Reset the phone by pressing both home and sleep/wake buttons until the Apple logo appears (ignore red slider).
2. Setting > General > Reset > Reset All Settings
3. Restore in iTunes using a backup.
4. Restore as a new iPhone
5. Take it to the Genius Bar.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone.

HT1414 My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?

My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

Camera problem app, its giving me this purple images then the app freezes i press home button its goes fine back home screen it just the CAMERA APP ITSELF. i did RESTORE

camera problem app, its giving me this purple images then the app freezes i press home button its goes fine back home screen it just the CAMERA APP ITSELF. i did RESTORE

I've found a new way .. I restart the phone manually. And it works. But sometimes , the Problem reappears and sometimes it doesn't . But when it does , its just too annoying. Therefore, restarting the phone manually is a temporary solution. But what's the permanent solution for it? Let's wait and hope that someone comes up with one.
And I hope this restarting hint solves your problem too.
P.S- instagram or any other app won't make a difference. That's what i think .. Cz I don't have that app on my iPhone.

Decimals not seen in the query...

Hi Guys,
I have a problem with the query..
I have loaded a KF with 2 decimal places in the cube.
But when I run a query created on the cube, the digits after the decimal place are not seen in the query.
For e.g. the value of the KF in the cube is 9.85...but in the query, it is seen as 9
please let me know where do i need to make the changes.
FYI..the unit of the KF is %. Has this got anything to do with the problem ?
thanks in advance,
Punkuj...

Hi Aby,
Sorry, i just missed to mention this imp point :
I had done the operation that you have suggested :
I am getting the following output :
In the Cube : 9.85
in the query ( after the decimal selection) : 9.00
I hope that clears my problem..
Thanks..
Punkuj

Is there any app to quit from application with out pressing home button every time

is there any app to quit from application with out pressing home button every time?

Months ago my home button was screwed up, and I was worried. I'd have to wait atleast for a week to get it repaired as I was busy with my exams. So I found a solution. Goto Settings->General->Accessibility.
Scroll down, and under "Physics & Motor", select "Assistive Touch". Toggle it on, and you get lots of options. You don't need to click the home button all the time. It is a very simple widget like stuff, that stays no matter what app you're using and you can do various functions with it. Initially, it's irritating as you see it everywhere. But it fades itself out and appears when needed. After you get used to it, it's really helpful.

HT2506 How do I drag an image around in the view, once it's magnified larger than the viewing area? I can imagine a simple "hand" tool like in Adobe PDF Reader doing this, but it's oddly missing in this application, quite a shame.

How do I drag an image around in the view, once it's magnified larger than the viewing area? I can imagine a simple "hand" tool like in Adobe PDF Reader doing this, but it's oddly missing in this application, quite a shame.

@Csound1 how is my mac relevant? I'm talking about software not hardware.
@Kurt Lang sorry, I composed the message when looking at "Preview" application help on this site, the fact that it missed the context here, is another issue I have with Apple's "famous" UI/UX design...
So for the record, I'm talking about the "Preview" app that comes bundles with Max OSX.

While closing the application, I hope we press home button twice and then just push upward the particular application which we would like to close in iOS 7, Ryt? But sometimes the screen of the particular application is not seen bit the icon alone shown?

Similar Messages

Maybe you are looking for