While Configuring Siebel Server we are getting "Unable to Connect to Gateway server" error in siebel 8.2.2.14

Hi
While Configuring Siebel Server we are getting "Unable to Connect to Gateway server" error in siebel 8.2.2.14
Our OS is windows 2008 R2 64 bit,Orcale client is 11g 32 bit and Oracle DB is in 11g.We are also able to connect to DB using ODBCSQL.
Please help.
Regards
Shuvendu

Hello Shuvendu,
Thanks for using Oracle Communities.
About your error, there could be many reasons, To start with, please have following knowledge article to know possible reasons.
C028: "Unable to Connect to the Siebel Gateway Name Server" Logged By Configuration Wizard (Doc ID 1391312.1)
I hope it helps.
Best Regards,
Chetan
P.S. If any one of the provided responses has been correct or helpful it would be great if you could mark them as appropriate.

Similar Messages

When sent reviews, repeatedly getting "unable to connect to review server" msg

My company is now using Acrobat's review tools for document signoff. However, 80% of the time I get the "unable to connect to review server" message, even when I'm opening the document from the server itself. As a result, I am unable to participate in the dynamic review process.
Can anyone suggest any solutions that will allow me to avoid this issue? Our IT department is stumped because I do have access to the server, always make sure that I'm logged in before opening the document from any attachment, and even open the review documents directly from the server. I'm using Acrobat 9 Pro.
Help!

Hi Steve,
Thanks for the suggestion but we're not using the Acrobat.com server. We have instead elected to host review documents on our own internal server (we deal with government contracts and our internal compliance rules don't permit hosting such documents on outside servers). Because of that, I thought this was an Acrobat application issue, not an Acrobat.com server issue.
Chris

TS1424 I am trying to download an app but i am getting unable to connect to itune store error message.

I know alot of people got this error message while trying to download app. Any solution yet?

Most often a connection error. Since you are (I assume) seeing this on your iPad, the solution that often solves this is to reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart. Once back up, try again and see if there is still an issue.

Sharepoint Integrated SQL Reporting - Unable to connect to the server that is specified......

This is driving me crazy. I have Reporting services implemented on several sites in Sharepoint. For some reason just one site refuses to work. I see all the features are there. I can create data sources.
When I try to create a report I get :
"Unable to connect to the server that is specified in the URL,
http://help.site. Make sure that the server is running, the URL is correct, and you have permission to use the server"
I'm using my domain admin account, I know know this works on every other site. I know I haven't forgotten the general setup of the service.
The only difference is this site allows "anonymous" connections. Has anyone heard of an issue about using anon and reporting services? Either way I authenticate before I login but that doesn't have an effect.
David Jenkins

Thank you forums!!!!
I found an existing thread.
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/d815b9fb-3431-490d-bd51-e7e21fcb788e
1) Opened up IIS
2) Expanded my intranet folder
3) Expanded _vti_bin
4) Highlighted "ReportServer"
5) Double Clicked on Authentication
6) Disabled "Anonymous Access" to the reporting folder itself
7) Opened report builder 3.0 and typed in http://intranet.company.com" BOOM instant connection :D
David Jenkins

HP Photosmart 7520 unable to connect to web services error

I've used my HP Photosmart 7520 for years without issue scanning to email. Now I get "Unable to connect to Web Services" error message. I've done all the procedures listed in the blog, including changing the manual DNS server configuration and still get the same error. Help!

Hi @ajbond77,
Welcome to the HP Support Forums. I understand that you are getting a connection error message when attempting to use the scan to email feature of your Photosmart 7520 printer.
If you have already set a manual IP address and manual DNS servers, then please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Unable to Connect to DB Server Error while configuring UDDI 3.0 in BizTalk 2013

Hi Team ,
While configuring BizTalk UDDI 3.0 , i am getting an error "unable to connect to DB Server. " In BizTalk 2009 , hotfix was available , but could not find any for BizTalk 2013
DB Server : SQL Server 2012 64 bit
Please help me to fix this
Abhijith

Got the solution
We need to proceed in such a way that DB component alone need to be installed in DB Server. Rest in BizTalk Application Servers
FYI
http://tjthompson5150.blogspot.in/2010/04/esb-toolkit-20-multi-server.html
Abhijith

[Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

TS3899 I have a hotmail account set up on my ipod, but in the past two weeks I have had issues trying to pull up mail. I get a "unable to connect to the server" message. Any Ideas?

I have a 4th gen ipod toch. As of the past two weeks I have been unable to receive my hotmail on the ipod. I get a "unable to connect to the server" message and all older emails are now gone.

I have a 4th gen ipod toch. As of the past two weeks I have been unable to receive my hotmail on the ipod. I get a "unable to connect to the server" message and all older emails are now gone.

TS3899 I am unable to get mail, I am getting an error message that says cannot get mail, the connection to the server failed.

I am unable to send or receive mail. I am getting an error message that says, cannot get mail, the connection to the server failed

Hotmail IS having problems:
http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
http://www.engadget.com/2013/08/14/outlook-outage/
http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
http://mashable.com/2013/08/14/outlook-down/
http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125).

I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125). I'm running iMovie 09 v. 8.0.6 on a iMac with OSX v 10.6.8, 2Ghz core duo, 1GB 667 Mhz DDR2 SDRAM. Any ideas why?

That particular error comes up for a number of reasons, sometimes it's the size of the movie you're trying to export. Bengt Wärleby a longtime contributor to the iMovie Discussion Group has advised a number of people on this error code, so I am going to link to his latest advice he's given to anyone trying to export to DVD from iMovie: Bengt's tips for great DVDs.
Specifically, try bypassing Share to iDVD by using Share to Media Browser instead.
In the Share to Media Browser dialog box choose the Large Size.
When(If?) it gets through that process, quit iMovie altogehter then go to iDVD.
Create a new project and click on the Media button near the lower right hand side of the Project Window.
Then click the Movies button in the Browser window just above that.
Under the iMovie star icon you should see the name of the project you shared out from iMovie.
Drag that into the project and burn the DVD.
If it's still to large or you get the same -2125 error code trying to Share using the Medium size instead. But again if you really get stuck consult Bengt Warleby's User tips:
Bengt's tips for great DVDs

I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?

I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?

Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

HT204053 I keep getting a message to accept the terms and conditions of icloud and when I click on it it tells me the "unable to connect to the server."

I updated to ios 7 and keep getting a message to accept the terms and conditions of icloud and when I try to do this, I get the message "unable to connect to the server". This message pops up quite frequently.

GB
Message was edited by: gail from maine

Unable to connect to administration server from essbase console,

Hi All..
After successfully completely installation and configuration of essbase 11.1.2.3 iam unable to connect to administration server from essbase console,
and also while connecting to oracle database it says "oracle not found".
essbase 11.1.2.3 is installed in windows 2008 server R1.
kindly help us.

Hi John
and thanks again for the reply
These log files has following information
and rest of files are empty in the specified path.
        HyS9RaFrameworkAgentOut :
Java App Loader V1.3 (C)2006 by Hyperion Inc.
$> java -cp . -Dloader.application=xxx.app com.brio.one.common.utils.Loader [arguments]
> Reading application file 'C:\Oracle\Middleware\EPMSystem11R1\common\raframeworkrt\11.1.2.0\bin\agent.app'...
> Loading classes...
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/wksagent.jar ...OK
file:C:/Oracle/Middleware/modules/javax.activation_1.1.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/foundation.jar ..........OK
file:C:/Oracle/Middleware/oracle_common/lib/java/shared/jsch/0.1.37/jsch-0.1.37.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/iona63.jar ..................OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/comutil1_01.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/eiengine.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/misc/11.1.2.0/servlet-api.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/JakartaCommons/jakarta-commons.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/logJavaUtil.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/javax.zip ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/bqservice.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/bcel-5.1.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/scorecard-search-api.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/waservices.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar ...OK
file:C:/Oracle/Middleware/modules/com.bea.core.apache.velocity.dep_1.4.jar ...OK
file:C:/Oracle/Middleware/modules/com.bea.core.apache.velocity_1.4.jar ...OK
file:C:/Oracle/Middleware/modules/javax.mail_1.4.jar ...OK
> Creating URLClassLoader...
> Setting New Context ClassLoader...
> Loading Main class 'com.oracle.cmc.Agent'...
> Getting 'main' method...
> Starting application...
       HyS9EssbaseStudio_epmsystem1-syserr:
INFO    Server configuration file: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties.
06:38:01 07/05/13 INFO    Logger configuration file: C:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bin\logging.xml.
06:38:01 07/05/13 INFO    Starting up.
06:38:01 07/05/13 INFO    Oracle Essbase Studio Server. Version 11.1.2.3.000, Build 4386, March 26 2013. Copyright © 2008 - 2013, Oracle. All rights reserved
06:38:14 07/05/13 (system) INFO    Root folder for flat datasource files has been created: `C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\.\datafiles`.
06:38:14 07/05/13 (system) WARNING Failed to load driver for sap.
06:38:14 07/05/13 (system) WARNING Failed to load driver for teradata.
06:38:14 07/05/13 (system) WARNING Failed to load driver for netezza.
06:38:17 07/05/13 (system) SEVERE Unable to establish connection to MySQL server: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server..
06:38:19 07/05/13 (system) SEVERE Unable to establish connection to MySQL server: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server..
06:38:19 07/05/13 (system) SEVERE Catalog.CannotInitializeStorage=Cannot initialize catalog storage. Make sure the server.properties file contains the correct information.
   -------------- Exception --------------
   com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Cannot initialize data storage engine.
at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:91)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:104)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:198)
at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:81)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)
at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1507)
at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:233)
at com.hyperion.cp.server.RequestListener.init(RequestListener.java:174)
at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:214)
at com.hyperion.cp.server.ServerMain.main(ServerMain.java:296)
Caused by: com.hyperion.cp.driver.util.DriverConnectionException: Cannot establish connection to MySQL server.
at com.hyperion.cp.driver.adapters.sql.mysql.MySQLConnection.createSQLConnection(MySQLConnection.java:130)
at com.hyperion.cp.driver.adapters.sql.SQLConnection$ConnectionPool.<init>(SQLConnection.java:1229)
at com.hyperion.cp.driver.adapters.sql.SQLConnection.construct(SQLConnection.java:450)
at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:113)
at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)
at com.hyperion.cp.server.QueueableTask.setMetadataConnection(QueueableTask.java:53)
at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:73)
... 11 more
Caused by: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.mysql.jdbc.Util.handleNewInstance(Util.java:411)
at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1116)
at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:344)
at com.mysql.jdbc.ConnectionImpl.coreConnect(ConnectionImpl.java:2333)
at com.mysql.jdbc.ConnectionImpl.connectOneTryOnly(ConnectionImpl.java:2370)
at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2154)
at com.mysql.jdbc.ConnectionImpl.<init>(ConnectionImpl.java:792)
at com.mysql.jdbc.JDBC4Connection.<init>(JDBC4Connection.java:47)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.mysql.jdbc.Util.handleNewInstance(Util.java:411)
at com.mysql.jdbc.ConnectionImpl.getInstance(ConnectionImpl.java:381)
at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:305)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:207)
at com.hyperion.cp.driver.adapters.sql.mysql.MySQLConnection.createSQLConnection(MySQLConnection.java:123)
... 17 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:218)
at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:257)
at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:294)
... 32 more

[Solved] Samba log spam: Unable to connect to CUPS server

Hi everyone,
I'm running into an annoying issue with samba. I don't have any printers installed, and probably won't. However smbd complains to no end in /var/log/errors.log about not being able to connect to a cups server:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: Samba name server ASAKURA is now a local master browser for workgroup MYGROUP on subnet 192.168.1.121
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:32:22 asakura smbd[4552]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4552]: Unable to connect to CUPS server localhost:631 - Connection refused
Apr 18 12:32:22 asakura smbd[4553]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4553]: Unable to connect to CUPS server localhost:631 - Connection refused
Those last two lines get spammed constantly.
I've done a little bit of research into the matter, and followed the steps here to try to resolve the problem: http://www.davekb.com/browse_computer_t … server:txt
Unfortunately it doesn't appear to make any difference.
Here is my /etc/samba/smb.conf:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = MYGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = no
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
; [homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
; [printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[shared]
path = /media/shared
valid users = foosoft
public = no
writable = yes
[tomato]
path = /media/data1/tomato
valid users = foosoft
public = no
writable = yes
show add printer wizard = no
printing = none
printcap name = /dev/null
disable spoolss = yes
I'm totally out of ideas here, anyone have a tip on what I could try next?
Last edited by FooSoft (2009-04-18 19:52:28)

glad you posted it first i had the same problem.
However, samba was complaining that
printing = none
was invalid. I removed that line and it works great.
thanks
Last edited by lio (2009-10-16 00:20:14)

I have a ipad mini and it says that it has perect wifi yet when i go into safari it says unable to connect with the server how can i fix this?

I have a ipad mini and i have had it for less then a year, it says that i have perfect wifi up in the left corner where the wifi is always at but when ever i go into the built in safari it says that it is unable to connect with the server. How can i fix this because with out it connecting to the server or internet it is kind of useless to me. I do have ios7 if that helps

The wifi symbol only indicates the presence/signal strength of wifi. Not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

While Configuring Siebel Server we are getting "Unable to Connect to Gateway server" error in siebel 8.2.2.14

Similar Messages

Maybe you are looking for