While creating Billing, system is very slow..performance issue

Hi,
While creating Billing, system is very slow. How can I debugg and provide the analysis where is the exact problem.
This is showing performance issue.
Waiting for kind response.
Best Regards,
Padhy
Moderator Message : Duplicate post locked.
Edited by: Vinod Kumar on May 12, 2011 10:59 AM

hi,
Chk the links
http://help.sap.com/saphelp_nw04/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
Re: How to create Secondary Index?
How may secondary indices I can create on the ODS?
Deletion of ODS index
Ramesh

Similar Messages

I installed yesterday iCloud , since the performance the system is very slow with pinwheel at every clic

I installed iCloud yesterday, since the system is very slow, with pin wheel at every click
What can I do?

I would ask in the dedicated iCloud forum. Good luck. https://discussions.apple.com/community/icloud

Accounts determination error is coming while create billing.

Hi Experts,
Accounts determination error is coming while create billing for Account Assignment Group A4 . In some cases only this error is appearing . I m a ABAPer I got this case and I m debugging the code . Can anyone suggest me what all the things i need to check to know the root cause . This error is coming very rarely but I want to find the reasons. I saw some of scn post bt it was not clear .
Please suggest briefly what w'd be the probable cause of this error and how to correct it.
Thanks in advance

Hi Dharmkrit,
In one of your earlier posts, you have mentioned that you have assigned G/L accounts by selecting table 1. This is probably where you might be going wrong.
Please follow the below steps to cross check your entries and you should hopefully have a solution.
(1) First of all, start from the account determination procedure and check which procedure is assigned to the billing type.
(2) Check the account determination type that is maintained in the procedure.
(3) Check which access sequence assigned in that condition type
(4) Check which table/tables have been maintained in the access sequence
* In most probability, you would have maintained a different table in the access sequence while you are trying to assign your G/L accounts to some other table
* Also, since you say that this error is only for a particular account determination type, check if you have maintained the correct combination of application/chart of account/Customer account assignment group/material account assignment group/G/L account in the correct table. However, this combination of fields depends on the table that you have used in the condition technique.
I suggest that you write your entries down while checking the flow. This will give you a clear picture if a connection is missing somewhere in the condition technique.
The customer/material account assignment groups are just keys (two digit codes) and their determination has nothing to do with Z1/Z2/A1 or any other code that you have defined in the system. The main determination is purely based on the condition technique and how correctly you have maintained the connections between the tables, access sequences, types and procedures. Just recheck these entries and you should be able to resolve the issue.
Hope this helps
Regards,
Sumita Mittra

Error while creating billing documents

Hi,
While creating billing documents I am getting error message as
Maintain customizing for excise and series group determination
Message no. 8I619
I have check the setting for CIN it is OK excise and series group are maintain properly so what can be the proble,
regards,
zafar

Hi,
Check once again customizing
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Thanks
Chidambaram

Create Excise invoice(J1IIN) document while creating billing document using bapi BAPI_BILLINGDOC_CREATEMULTIPLE

Dear Experts,
My scenario is:
We have batch split scenario, where the parent line item of billing document has 0 quantity and its subsequent item (item with batch number) holds actual quantity data.
When we create billing document using VF01 against delivery document, system creates billing document along with excise invoice document (J1IIN Document). And in excise document contain same number of line items that of billing document. Please see the below attachment:
Biiling document screen shot:
While creating billing document, the J1IIN Document created automatically. Below is the screen-shot for the same.
Now the issue is:
When we create billing document using BAPI: BAPI_BILLINGDOC_CREATEMULTIPLE system creating only billing document and not creating excise invoice document.
When we create excise document manually using J1IIN the zero quantity line items are excluded in excise invoice document.
Please see the below screen-shot for the same; The z quantity line items are missing.
We want excise document to be created while creating billing document using BAPI BAPI_BILLINGDOC_CREATEMULTIPLE. Or is there any other BAPI for the same purpose.
Customization is also maintained for creating excise invoice document automatically.
Regards,
Rajesh Sadula.

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Lion: very slow performance of my macbook pro

very slow performance.
went to terminal, did the top command, and got following results (mind you, ONLY have Safari and of course Terminal open):
Processes: 96 total, 4 running, 9 stuck, 83 sleeping, 419 threads      19:07:17
Load Avg: 1.99, 1.81, 1.59 CPU usage: 2.36% user, 5.21% sys, 92.41% idle
SharedLibs: 1660K resident, 0B data, 0B linkedit.
MemRegions: 15947 total, 2662M resident, 47M private, 209M shared.
PhysMem: 695M wired, 2175M active, 1083M inactive, 3953M used, 13M free.
VM: 250G vsize, 1093M framework vsize, 699065(68) pageins, 1724738(881) pageouts
Networks: packets: 70104/55M in, 66648/10M out.
Disks: 966630/9347M read, 327765/18G written.
PID   COMMAND      %CPU TIME     #TH #WQ #POR #MREG RPRVT RSHRD RSIZE
4058 top          5.2   00:03.32 1/1 0    28   29    912K   216K   1620K
4055 bash         0.0   00:00.02 1    0    20   23    356K   216K   1112K
4052 CVMCompiler 0.0   00:00.30 1    0    30   69    7780K 220K   16M
4051 login        0.0   00:00.08 2    1    33   63    928K   216K   2184K
4049 Terminal     0.3   00:01.34 7    3    128+ 164+ 7580K+ 13M    15M+
4042 ocspd        0.0   00:00.02 1    0    26   33    420K+ 276K   1376K+
4041 WebProcess   0.0   00:04.35 7    3    119 201   16M-   10M    26M-
4039 Safari       1.1   00:09.44 12   3    193 413   47M-   20M    81M-
3958 spindump_age 0.0   00:00.02 2    2    38   55    356K   220K   1100K
3956 spindump     1.3   00:42.93 16/1 13   228 145   46M+   15M    53M+
3953 aosnotifyd   0.0   00:00.18 3    1    53   279   2064K 3532K 6156K
3939 AddressBookM 6.8   06:59.11 4    1    68   4067+ 2131M- 3308K 1554M-
3895 lsboxd       0.0   00:00.06 2    2    49   69    1156K 6820K 3292K
3031 cookied      0.0   00:01.36 2    1    42   82    2028K 268K   3
every minute or so the computer blocks, every 3 or 4 hours I have to restart etc.
any suggestions?

ok, stopped syncing in System preferences and even (horror) deleted the file which reappeared in seconds.
now waiting to see if stopping the syncing helps - though computer is now working a bit better, the info on Activity Monitor would indicate it is not a real improvement
473           AddressBookMobileMeSharingAgent          me          1,4          4          1.020,0 MB          Intel (64 bit)
312           helpd          me          0,4          65          358,9 MB          Intel (64 bit)
0           kernel_task          root          1,1          76          336,6 MB          Intel (64 bit)
459           Mail          me          0,4          9          276,2 MB          Intel (64 bit)
194           java          root          0,1          30          162,4 MB          Intel (64 bit)
405           Safari          me          0,5          12          120,0 MB          Intel (64 bit)
407           Safari Web Content          me          0,2          7          100,3 MB          Intel (64 bit)
195           WindowServer          _windowserver          0,5          7          64,4 MB          Intel (64 bit)

InDesign CC 2014 very slow performance when dragging images and changing text

InDesign CC 2014 very slow performance when dragging images and changing text.
Running on 2010 Macpro 2.4GHz. 8GB RAM. Any solutions? I've read through many forums on this and tried several fixes.

Have exact same issue on my Windows 7 machine. Resetting preferences is a workaround.
So I start InDesign whilst holding down these keys.
Ctrl + Alt + Shift (Windows) or Cmd + Ctrl + Opt + Shift (Mac)
Whilst inDesign is usable again with this fix- I have to do it every time so it trashes all my preferences so NOT GOOD long term fix. Otherwise InDesign freezes and can only be stopped by forcing a quit.
I have manually deleted the preference files and I have created a brand new admin account - but still no luck - will be onto support tomorrow

Why the system is very slow than before

I have two computers, One is desktop, another is laptop,but I met the problems about the performance for the two
computers, from last Monday, two computers speed are very slow, after I checked the task manager, I found the service(ntoskrnl.exe) used the 60-70% CPU resource, but why the ntoskrnl.exe cause this? I also download the tools and analysised it, but it seems
that no useful information,how to find the root cause?
summary all the information as below
1.Suddenly this problems happened
2. I closed the AVP (Kaspersky antivirus software), but it seems no improved for the performance
3. I have closed the Windows search service, but no change for this
4\I use the maxthon and Firefox browse
, all the same thing happened.
you can download the Log file from http://1drv.ms/WwTBhU

Hi,
Any update in this thread?
http://social.technet.microsoft.com/Forums/windows/en-US/ce42930b-f0f3-4df7-a621-d8f9d59109b4/why-the-system-is-very-slow-than-before?forum=w8itpronetworking
Regards
Yolanda Zhu
TechNet Community Support

Change in document type while creating billing document from sales order

While creating billing document from Sales order it is creating with document type RV which is standerd one but i want to change Document type.
How can i change it?
Regards
Raj

Hi
If you use another existing document type, check that it has a number range suitable to you. Else create a new 'z' type and assign an entirely new number range, not used in the other doc types.
It is useful to make the FI document number the same number. If I understand from the forums, the FI number range must be external. Search the forum for this. It is very useful for the Finance people.
Kind regards
Dawn
Edited by: Dawn Verrell on Sep 9, 2010 4:10 PM

Compaq sr1320nx /win xp after keystroke/command, the system is very slow 10-15 secs. before response

after keystroke/command, the system is very slow 10-15 secs. before response

What I've done is that I reinstalled 10.8.1 and each time, I ran disk utilitiy. It has helped but fter a while, especially when waking up from sleep, EVERY app can take a lot of time to come up, including those already activated. Every click would take at least 5secs to respond... and then the spinning ball comes up.
It's only after the same app was used, then it would be smooth. For example, I run my cursor down to the bottom of the screen where my dock is hidden. It would take a few times of running down before the dock shows up. From that point on, it would would work nicely unless I click on any of those apps in the dock. Then, it would take another 5secs or more before something shows on the screen such as clicking on Mail. It takes more than 5secs before mail pops up. Then, when I click on any mailbox, it would take another 5secs or the spinning ball comes up. From that point on, clicking on Mail is smooth and cicking on the same mailbox is smooth unless I click on a different mailbox or go to preferences, for example.
So, I keep running disk utility almost everyday and now, it works 99% of the time. If it slows again, I run the disk utility. I guess that's the way to go until they come up with a proper fix.
All this housekeeping work reminds me of Windows and the endless defragging and optimising. That was one of the few reasons why I switched to Apple and now...
Dear Mr Steve Jobs, please send some enlightenment to your Apple teams!

Very slow performance in Lightroom 3??

I just upgraded to Lightroom 3.0 and I am very suprised how slow it is!?! I don't have a very large library and I'm on two reasonably new computers yet the difference from Lightroom 2 (snappy performance) to Lightroom 3 (VERY sluggish) is quite suprising..
I'm using it on a XP and a Vista system with the same results...
Is anyone else experiencing this???
Thanks,
Ken

I've noticed a slow down in performance with Lightroom 3 as well. As far a looking around the forum for older threads, ...found older lightroom 1 and 2 threads.
Your Title "Very Slow Performance in Lightroom 3??" fits what I'm looking for just perfectly.
Jim

Portal Runtime Error while creating new system in portal content

Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file

Hi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6

Hi
Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file
thanks in advance
Rock

hi,
check the log file and let me the the error.
manish

Error while creating SOURCE SYSTEM

Hi All,
I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
<b>Error in source system RXX_100
Message no. RSAR502
Diagnosis
With Remote Function Call to system RXX_100 error Screen output without connection to user. ccurred.
Procedure
Remove the cause of the error.</b>
Kindly provide me suggestions and DOCS related to the same.
Suitable points will be awarded for replies.
Expecting your kind reply,
Vineeth

Hi ,
In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
973555 - System must be open for creating/connecting source systems
Thanks,
Shanaka

Error while creating MDM system on Portal

Hi All,
I am trying to create MDM system in EP. MDM is 5.5 SP06. EP is 7.0 . We have upgraded the MDM sca files on Portal from SP05 to SP06.
While creating the system , after entering the server, we are getting the following error.
com.sap.mdm.internal.protocol.manual.ServerException: File failed a crc check
Please help
Regards
Shilpa

Hi Shilpa,
If this is your MDM build version 5.5.63.80 SP06. It means you are using MDM 5.5 SP06 Patch3 hotfix 80.
You need to find the Sca file of compatible with this version.
So they should be
- MDMJAVAAPI06_03.sca
- BPMDMAPPLN06_03.sca
- BPMDMTECHN06_03.sca
The hotfix number can slightly differ but the Support pack and patch number must match.
You need to follow this link:
http://service.sap.com/swdc
(download MDM support packages) Download>support packages and patches>entry by application
group>sap netweaver>sap mdm>sap mdm 5.5>Entry by component>Portal content
Then select which MDM portal content you want and check what is the version of those available sca files.
based on the availablity of the sca files you need to upgrade/downgrade or server.
As compatibility between the server version and sca files is a must for proper functioning.If its not possible to change your mdm server version then you can ask your Basis team to hunt the matching sca files for you.
Hope It Helped
Thanks & Regards
Simona Pinto

While creating Billing, system is very slow..performance issue

Similar Messages

Maybe you are looking for