While creating change number

At the time of creating change number do i need to give the material numer whose BOM need to be changed using that change number Or while changing the BOM of a material using that change number in the change no. master the material is updated in Object tab.

Dear Behera,
1.At the time of change number creation in CC01,there is no need to mention the material code for which the change number is
going to be used in change/creation of BOM or any other object.
2.But if my understanding is correct means while creation of the change number let's assume you have included the check box
for Gen New(say against Bill of materials as object type) also means,you can use for creation of BOM and not for change of
any existing BOM(In that case you have to include the material code in the material you can BOM tab page in CC01 itself and
save the data,and then only you can use this change number for change).
Correct me if i'm wrong.
Regards
S Mangalraj

Similar Messages

  • Significance of IBase, Component and Product ID while creating Change Reque

    Hello,
    When we create a change request via SOLMAN_WORK_CENTER, we are supposed to provide values for
    1) IBase
    2) Component
    3) Product ID
    Ibase can be defined as the way SAP differentiates in a multiple system (APO, CRM, ECC) environment, the corresponding environment.
    The values corresponding to IBase can be obtained via IB51,52 and 53 tcodes.
    Can the value for IBase obtained via SMSY t code also?
    What does component and Product ID signify?
    Where can we get values for Component and Product ID?
    Is Product ID the same as value we get from menu Option System->Status->Installation Number
    Is it necessary to provide all 3 values (i.e. IBase, Component , Product ID) while creating change request?
    If Not, how will SolMan identify which system the change should point to?
    Or only value for Ibase is enough?
    Thanks,
    Vikas

    Ibase can be defined as the way SAP differentiates in a multiple system (APO, CRM, ECC) environment, the corresponding environment.
    The values corresponding to IBase can be obtained via IB51,52 and 53 tcodes.
    Can the value for IBase obtained via SMSY t code also?
    No
    What does component and Product ID signify?
    Product ID is not mandatory. I actually hide it in the CRMD_ORDER screen.
    Where can we get values for Component and Product ID?
    Is Product ID the same as value we get from menu Option System->Status->Installation Number
    Component  - IB52 as you already mentioned
    Product ID - in a customizing table, I've seen it once but can't remember where honestly. As stated, I don't bother with the field
    Is it necessary to provide all 3 values (i.e. IBase, Component , Product ID) while creating change request?
    The iBase and component are mandatory, odd thing is if you enter the component without entering 1 in the iBase, SolMan will fill the 1 in for you.
    If Not, how will SolMan identify which system the change should point to?
    By the logical components assigned to your maintenance project. You can actually have transports for more than one production assigned to your change document. For instance you could have a BI and ECC transport assigned to the sane change document. Your tak list will have the dev, testing and production systems for each logical component assigned.
    Or only value for Ibase is enough?
    I was having this discussion with someone the other day. Since the logical components assigned to the mianteance project really determines what systems you can create transports for, what is the value of the component field? Best I could determine was when you use the Logon on to System action, it points to the one listed in the component field only. other than that, I'm not sure.

  • Error while creating/changing/desplay cost element

    Gents
    Need urgent help. I am getting a below error while creating/changing/Displaying the cost element.
    Table CI_CSKB is not an active table
    Message no. AD 228
    Kindly help me to get the resolve this issue.
    Thanks and Regards
    Vinay Thakre

    hi
    In Cost Elements (Data is Dependent on Controlling Area), please go to extras and check your controlling area while creating the cost element, and make sure if u r creating Primary CE, it has been created as a G/L account and also make sure you use correct CE Category.
    Thanks
    plz award points if helpful.

  • Enhancement/Exit for transportation zone while creating/changing customer

    Hi,
    I want Enhancement/Exit for chnging transportation zone while creating/changing customer.

    HI,
    I  used inmplicit enhancement .
    and change kna1-lzone
    but still previous value is store.
    no changes made.
    even i changed
    addr_chg = 'X'.

  • No popup to select active implementation cycle, while creating change Request

    Hi,
    I have two active Implementation projects.
    While creating change requests, it is not giving any popup to select the specific cycle.
    It automatically assigns to newly activated Cycle.
    Please advise.
    Thanks & Best Regards,
    Kiran Sathyan

    Hi,
    if you would mention about sap solution manager version, this critical landscape transport and design before you state the problem, this would saved much time.
    Now I dont think so Popup functions applicable for implentation cycles.
    check out http://help.sap.com/saphelp_sm40/helpdata/en/1a/c39742042fc86ae10000000a155106/frameset.htm
    and regarding closing the project cycle check this out below informations,
    933705 - Closing inconsistent project cycles
    Change Request Management scenario: Usual questions and known errors
    question 10.
    Make sure you closed open tasks, chk in tcode scma
    Thanks
    Jansi

  • Error while create/change configuration an application

    Hi,
    while doing the configuration application.
    when i am trying to create/change configuration an application.
    i am getting following error.
    Error:
    Service cannot be reached
    What has happened?
    URL http://os1gvzg.gemsconsult.com:8000/sap/bc/webdynpro/sap/configure_application call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system RT1 with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:os1gvzg_RT1_00-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    Your SAP Internet Communication Framework Team
    can anybody help me out.
    thanks in advance,
    Kiran.

    Hi,
    please check [documentation|http://help.sap.com/saphelp_nw2004s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm]
    grtz,
    Koen

  • Problem while creating change document

    hi all
    i am creating change document for master data like project type , project applicant
    but i am unable to complete it as i am very new to ABAP
    can any one give me step-by-step procedure to do the same?
    I have followed the procedure given in sap Liabrary i.e.
    1 -  Define the change document object
    2 -  Check in the Dictionary, whether the data elements of the fields which are to
          be logged are flagged appropriately.
    3 -  Generate the update.
    4 -  Program the appropriate calls in your program.
    But then i got stucked on point 4...what exactly I need to do in that?
    Regards
    Sheetal

    Hi,
    The table you have used is having the key which comprises both MANDT and ID. However, while writing the code you must have used only the ID. The system takes MANDT and ID both as the key fields.
    This may be the reason of the error you are encountering.
    Thanks,
    Jyoti

  • Thread was being aborted Exception while creating large number of Sites in SharePoint 2013

    Hi All,
    I am getting threading exception while creating a large extent of sites in SharePoint 2013. I am reading data from an excel file and then looping each row. The sites are creating for first two rows then i am getting exception. This code working fine in dev
    server but not in UAT server. I tried with changing maxRequestLength in web.config but not working. And also followed the below link.
    http://support.microsoft.com/kb/928756
    My code as follows-
    private void CreateSites(DataRow dr)
                try
                    using (SPSite site = new SPSite(OtherSiteCollection)) // I am creating sites in another site collection
                        using (SPWeb web = site.OpenWeb())
                                SPWeb newWeb = null;
                                SPWebTemplateCollection templates = site.RootWeb.GetAvailableWebTemplates(1033);
                                SPWebTemplate template = (from SPWebTemplate m in
                                                              templates
                                                          where m.Title == "SiteTemplate"
                                                          select m).FirstOrDefault(); //Here i am using custom template
        string siteName = dr["Site Name"].ToString();
                                newWeb = web.Webs.Add(siteTitle, siteTitle, siteDescription, 1033, template, true, false); //Getting exception here.
                                newWeb.Update();
                                newWeb.Dispose();
                catch (Exception ex)
                    lblMsg.Text = "Exception in create sites : " + ex.Message + ";" + ex.StackTrace + ";" + ex.ToString()
    I am getting error as-
    Exception in create sites: Thread was being aborted.;   at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent,
    String& bstrWebTemplate, Int32& plWebTemplateId)
       at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32& plWebTemplateId)
       at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate)
       at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate)
       at Microsoft.SharePoint.SPWeb.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWeb.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, SPWebTemplate WebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere)
       System.Threading.ThreadAbortException: Thread was being aborted.
       at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32&
    plWebTemplateId)
       at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32& plWebTemplateId)
       at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate)
       at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate)
       at Microsoft.SharePoint.SPWeb.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWeb.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, SPWebTemplate WebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere)
    Thread was being aborted.;   at System.Threading.ThreadAbortException: Thread was being aborted.
    Can anyone please help. Thanks!
    dinesh

    If you do this from a Console application, does it succeed?
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • BADI ME_PROCESS_PO_CUST is not triggering while creating/changing PO

    Hi,
    I am new to BADIs,
    I am trying to implement BADI ME_PROCESS_PO_CUST in ECC 6.0. I have done the implementation and activated. I kept a break point in PROCESS_ITEM method, but the BADI is not triggering while creating or changing the PO. Please advice me what could be the reason behind this?
    I used the SQL trace but i couldn't get the BADI ME_PROCESS_PO_CUST in the list.
    thanks in advance
    Regards
    Jagadish

    hello jagdish,
    implement   this user exit.....
    MM06E005...
    go to     EXIT_SAPMM06E_017   in that   then you can put a break point in the user defined function module.....
    or use
    BREAK  'C5133392'  (use your user in place of C5133392)....it will stop here while creating PO or changing PO...
    now you can do whatever you want to do in create or change PO using this function exit......
    perform the validations on import parameters.....to create  or change ....and activate the project....
    hope this will give you some idea and help

  • CHARM - Ibase while creating change request document

    Dear All,
    When we open the transaction, crmd_order to create change request, the ibase / component came by default as 0 / 0. I want that field to be blank, so that we can make that as mandatory field.
    regds,
    CB

    Hi Yunus,
    Your probably have changed the transaction type SLFN to a the customer namespace Z or Y. If this is the case you MUST also "Define Mapping Rules for Copy Control".
    Goto SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Change Management -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management ->  Define Mapping Rules for Copy Control.
    Once at this point in the IMG make a copy of SLFN -> ZLFN. This will resolve your problem.
    Kind regards,
    Latief

  • Error while creating change request via solman support desk message

    I have configured CHARM and my change req. is working for urgent correction, I have tested the entire workflow.
    however when i try to create a new change req. via support desk message --> create a change request open
    I get following error
    An action was terminated due to an exceptional situation.
    Message no. SOCM_ACTION_LOG 090
    Diagnosis
    An exception has been triggered in PPF action processing.
    System Response
    Action processing has been terminated. The status of the transaction is still incorrect.
    Procedure
    You cannot execute the action until the cause of the error has been removed.
    The error messages will be kept until the transaction is next checked for subsequent analysis.
    Procedure for System Administration
    If necessary, analyze other messages in the application log for the incorrect transaction. To analyze the termination, you can activate the breakpoints in the checkpoint group socm_exception.
    Additional Information:
    Exception CX_SOCM_PRECONDITION_VIOLATED occurred (program:
    CL_HF_HELPER==================CP, include:
    CL_HF_HELPER==================CM00A, line: 29).
    pls help

    Hi Yunus,
    Your probably have changed the transaction type SLFN to a the customer namespace Z or Y. If this is the case you MUST also "Define Mapping Rules for Copy Control".
    Goto SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Change Management -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management ->  Define Mapping Rules for Copy Control.
    Once at this point in the IMG make a copy of SLFN -> ZLFN. This will resolve your problem.
    Kind regards,
    Latief

  • Task is taking more time, while creating more number of jobs in PLSQL.

    Hi,
    I want to know regarding distributing a task to no. of scheduler jobs. On which basis we should have to define no. of jobs and also what will be advantage or disadvantage of increasing the number of such jobs for a particular task ?

    Hello,
    Looks like you have a 1:M relationship from TableA to TableB, with a 1:1 back pointer from TableB to TableA. If triggering the 1:M relationship is causing you delays that you want to avoid there might be two quick ways I can see:
    1) Don't map it. Leave the TableA->TableB 1:M unmapped, and instead just query for relationship when you do need it. This means you do not need to call tableA.addTableB(tableB), and instead only need to call tableB.setTableA(tableA), so that the TableB->TableA relation gets set. Might not be the best option, but it depends on your application's usage. It does allow you to potentially page the TableB results or add other query query performance options when you do need the data though.
    2) You are currently using Lazy loading for the TableA->TableB relationship - if it is untriggered, don't bother calling tableA.addTableB(tableB), and instead only need to call tableB.setTableA(tableA). This of course requires using TopLink api to a) verify the collection is an IndirectCollection type, and b) that it is hasn't been triggered. If it has been triggered, you will still need to call tableA.addTableB(tableB), but it won't result in a query. Check out the oracle.toplink.indirection.IndirectContainer class and it's isInstantiated() method. This can cause problems though in highly concurrent environments, as other threads may have triggered the indirection before you commit your transaction, so that the A->B collection is not up to date - this might require refreshing the TableA if so.
    Change tracking would probably be the best option to use here, and is described in the EclipseLink wiki:
    http://wiki.eclipse.org/Introduction_to_EclipseLink_Transactions_(ELUG)#Attribute_Change_Tracking_Policy
    Best Regards,
    Chris

  • Insufficient privileges while creating change set.

    Hi,
    I'm trying to setup CDC in Async Distributed HotLog mode with source 9i (9.2.0.7) and stage 10.2 database. Change source was created successfully, but when i run DBMS_CDC_PUBLISH.CREATE_CHANGE_SOURCE it gives error
    ORA-01031: insufficient_privileges
    ORA-09512: at "SYS.DBMS_CDC_PUBLISH", line 560
    It does create the propagation on source db for this change set and then gives this error. I'm following the chapter 16 of data warehousing guide to set it up. Have checked all privileges and I can't seem to figure this out. Has anyone faced something similar? what am i missing here?
    Regards.
    Ali

    Hi Ali,
    I had the same thing with plain Streams (dbms_streams_adm.add_Table_rule).
    The user with wich you set it up should have DBA role (that's somehow the requirement from Oracle, I would rather see some specific system-privileges in stead of having the whole DBA role to be granted). Another thing is that I wanted to create a package with functionality to setup my Streams environment. But in then the first time you would add table or schema rules, it creates the Capture or Apply process. And for that you need specific rights that are granted through the DBA role. But the Oracle rights-implementation prevents privileges granted via a Role to be used in a stored pl/sql-procedure. To be used in a stored-procedure you need the specific rights granted directly. That's another reason I'm not fond of the requirement of having to grant the DBA role.
    So grant the DBA role to your user, if not done allready, or if you use a stored procedure to setup your cdc then do the first call directly from an sqlplus script and not within your stored pl/sql code. Subsequent calls can then be made from your stored-procedure.

  • Change type field active mode while selecting Change number type

    Dear All,
    Our requirement is to get the list of Change type in the CC01 T-code when we click the change master. When we select ECR then we are getting the change list of change type. But, when we select the change master as type, then change type is coming as grey field. So we want the list of change type in change master
    Please suggest
    Regards
    Honyal

    Any input ?????????
    please
    Regards
    Honyal

  • Saving of different Material code in the system while Creating material

    Hi,
    Anyone can help me in following .
    While creating material number, there should be some User exit which is going to change the logic for saving of material number in the system.
    Example:
    Division and material Group should be added into the predefined number range.  Number range defined for raw material is 100000 to 199999. If division is 1A, and Material group is M01. The first number generated by system is 100000 , where as during saving into the table NUMBER SHOULD BE saved as 1AM01100000 & we must be able to work on the new number.
    If any query pl .revert.
    MG.

    Hi manish,
    This is possible using enhancement.
    Use the User Exit MGA00001
    and code the below like :
    cmara-matnr = cmara-matnr+7(11).
    CONCATENATE cmara-matkl cmara-spart cmara-matnr into cmara-matnr.
    set PARAMETER ID 'MAT' field cmara-matnr.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = cmara-matnr
    IMPORTING
    OUTPUT = cmara-matnr
    Hope it will solve your problem.

Maybe you are looking for