While creating RAC database on IBM AIX 5.3 following errors occur.

Hi,
I am creating a Oracle database on following configuration IBM AIX 5.3 box:
OS: IBM AIX 5.3
DB: Fresh installed Oracle 9.2.0.1 upgraded to Oracle 9.2.0.7 (Patch)
While creating a RAC database on the above server i got following errors:
ORA:00603 : ORACLE SERVER SESSION TERMINATED BY FATAL ERROR
ORA-27504 : IPC error 380 OSD context
ORA-27300 : OS system dependent operation : if_not_found failed with status:0
ORA-27301 : OS failure mesage: error 0
ORA-27302 : failure occured at:skgxpbaddr9
Licence high water mark = 0
Can any 1 help me out.Are the above error related to OS or something is wrong with the OS cluster / RAC. I tried creating single instance database on either of the server which are in cluster, no success.
Also 1 more thing i would like to add is that iam able to create single instance database on server which are not in cluster.
Any help regarding the above error is appreciated.

This is a bug (for patchsets 9.2.0.6 and higher), see metalink:
UNABLE TO START RAC INSTANCE AFTER APPLYING PATCHSET 9.2.0.6 ON AIX
Note:300218.1
Werner

Similar Messages

  • Oracle not available while creating RAC database

    Hi,
    I have got 2node Oracle 10gR2 RAC installed on solaris 10 and am using NFS for keeping clusterware and database files.
    cluvfy with pre dbinst option ran successfully.
    Now while creating RAC database through DBCA, I am getting Oracle not Available error message. No relevant message written in alert log.
    Can you suggest me as to what to do to resolve the issue please.
    Thanks in advance.

    Do you see any kind of logs under $OH/cfgtool*/dbca/..may be it will help with some pointers. If that doesn't give any useful information, try to startup nomount the instance using a sample init.ora file to see if reports anything in the alert log.
    Thanks
    -Chandra

  • RAC installation with 12c database on IBM AIX server 7.1(64bit)

    Dear Team,
    We have to configure the RAC with oracle 12C database on IBM AIX server 7.1(64bit).
    We are new to the RAC setup with 12c installation. So kindly provide the metalink id for proceeding the above installations.
    Thanks
    Kumar

    Hi,
    Refer this document also,
    RAC and Oracle Clusterware Best Practices and Starter Kit (AIX) (Doc ID 811293.1)
    Regards,
    krish.

  • DBCA ERROR WHILE CREATING A DATABASE

    While creating a RAC database using DBCA, DBCA gave the folling error -
    "Virtual IP address is not configured for cluster node "pdb1". Run
    "/opt/app/oracle/product/10.2.0/oracle/bin/vipca" as "root" user to configure
    it before performing the "create Database opration"
    I couldn't find vipca in oracle home.
    So, i started vipca from crs home as a root user and i got the following error
    while configuring the VIP -
    " CRS-0211: Resource 'ora.pdb1.vip' has already been registered"
    Thanks,

    A bit old but still useful info for Raw Device
    http://www.fors.com/orasupp/unix/37914_1.HTM
    If you are using 10gR2 consider use ASM instead.

  • ERROR:"IBM AIX RISC System/6000 Error: 2: No such file or directory" on RAC

    RMAN> show all;
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '/cdrs/rman/back_%p%d.%s' CONNECT 'SYS/pass@bosst1';
    CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT '/cdrs/rman/back_%p%d.%s' CONNECT 'SYS/pass@bosst2';
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/app/oracle/product/9.2/dbs/snapcf_bosst.cf';
    RMAN>
    RMAN> backup database;
    input datafile fno=00038 name=/dev/rvg01_lv032
    input datafile fno=00041 name=/dev/rvg01_lv035
    input datafile fno=00044 name=/dev/rvg01_lv038
    input datafile fno=00047 name=/dev/rvg01_lv041
    channel ORA_DISK_2: starting piece 1 at 20-MAY-07
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on ORA_DISK_2 channel at 05/20/2007 10:06:52
    ORA-19504: failed to create file "/cdrs/rman/back_1BOSST.13"
    ORA-27040: skgfrcre: create error, unable to create file
    IBM AIX RISC System/6000 Error: 2: No such file or directory
    RMAN>
    $ touch /cdrs/rman/back_1BOSST.13
    $ ls -l /cdrs/rman
    total 0
    -rwxr-xr-x 1 oracle dba 0 May 20 09:47 abc
    -rw-r--r-- 1 oracle dba 0 May 20 10:50 back_1BOSST.13
    $
    OS : AIX 5.2 with HACMP cluster
    DB: 9.2.0.7
    I executed the "Backup database " command on BOSST1.
    Would you please tell me where is the problem?
    Regards
    Faruque

    hi,
    do you actually have any space on that file system?
    rgds
    alan

  • APP-RG-09518: An error occurred while creating a database link

    Hi All,
    While creating a database link in Oracle EBS from one instance to another instance for transferring FSG reports
    Go to Any GL Setup responsibility...Setup>System>Database links > Create new database link
    Prior to the above...below steps should be done on the server.
    1.grant create database link to <apps.user>; (on db server)
    2.source tns entry should be in destination tns file and destination tns entry in source tns file. (check tnsping after entry)
    3.*make sure destination tns entry of 8.0.6 oracle home should be in source tns file* (Because we are creating db link for the application)
    4.Run the Program FSG Report.
    Regards,
    Harish Muramshetty.

    Hi,
    I have solved the issue as below:
    This error was started when I install a software which I have made myself and it uses sql server compact edition 3.5.  
    I saw when I manually replaced the sql related files from "C:\Program Files (x86)\Microsoft SQL Server Compact Edition\v3.5" with the files which  my software setup had "version 3.5.5386.0" then the error started. And if copy back the latest version 3.5.8080.0
    then it disappear. So use latest sql files in your software too.
    My software was replacing the the latest files with older version. 
    Muhammad Arshad Awan

  • Gating error while creating standby database in oracle 11g

    Dear Gurus
    I am getting following error while creating standby database. My database version is oracle 11g 11.2.0.1 in Redhat 5.2
    RMAN> duplicate target database for standby from active database;
    Starting Duplicate Db at 10-MAY-12
    using channel ORA_AUX_DISK_1
    contents of Memory Script:
    backup as copy reuse
    targetfile '/oracle/product/11.2.0/dbhome_1/dbs/orapworcl' auxiliary format
    '/oracle/product/11.2.0/dbhome_1/dbs/orapwstdb' ;
    executing Memory Script
    Starting backup at 10-MAY-12
    using channel ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 05/10/2012 15:44:18
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/10/2012 15:44:18
    ORA-17629: Cannot connect to the remote database server
    ORA-17627: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
    ORA-17629: Cannot connect to the remote database server
    RMAN>
    Regards
    Rabi

    Hello;
    Generally for the connection to work you need to add something like this to the listener.ora file :
    (SID_DESC =
        (global_dbname = STANDBY.hostname)
        (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
        (sid_name = STANDBY)
    )You should stop and start the listener on the Standby after adding this. Also your tnsnames.ora must be correct on both the primary and the Standby.
    Also you need an INIT for the Standby side :
    STANDBY.__db_cache_size=343932928
    STANDBY.__java_pool_size=4194304
    STANDBY.__large_pool_size=4194304
    STANDBY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
    STANDBY.__pga_aggregate_target=281018368
    STANDBY.__sga_target=834666496
    STANDBY.__shared_io_pool_size=0
    STANDBY.__shared_pool_size=469762048
    STANDBY.__streams_pool_size=0
    audit_file_dest='/u01/app/oracle/admin/PRIMARY/adump'
    audit_trail='db'
    compatible='11.2.0.0.0'
    control_files='/u01/app/oracle/oradata/PRIMARY/control01.ctl','/u01/app/oracle/oradata/PRIMARY/control02.ctl'
    db_block_size=8192
    db_domain='SOME.DOMAIN.COM'
    db_flashback_retention_target=2880
    db_name='PRIMARY'
    db_recovery_file_dest_size=2147483648
    db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
    diagnostic_dest='/u01/app/oracle'
    dispatchers='(PROTOCOL=TCP) (SERVICE=PRIMARYXDB)'
    log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
    open_cursors=300
    pga_aggregate_target=277872640
    processes=150
    remote_login_passwordfile='EXCLUSIVE'
    sga_target=833617920
    undo_tablespace='UNDOTBS1'
    log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=STANDBY'
    log_archive_dest_2='SERVICE=PRIMARY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) '
    LOG_ARCHIVE_DEST_STATE_1=ENABLE
    LOG_ARCHIVE_DEST_STATE_2=DEFER
    LOG_ARCHIVE_MAX_PROCESSES=30
    FAL_SERVER=STANDBY
    STANDBY_FILE_MANAGEMENT=AUTO
    DB_UNIQUE_NAME=STANDBYFinally
    startup nomount
    Start RMAN and issue duplicate command
    $ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
    RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
    Keys to success
    1. New Standby start NOMOUNT on new password file. ( On Oracle 11 you must copy and rename the file from Primary server )
    2. Hard coded listener on new Standby server.
    3. Correct tnsnames.ora files.
    4. Correct duplicate command.
    Please consider closing some of you old answered questions
    Best Regards
    mseberg
    Edited by: mseberg on May 10, 2012 7:06 AM

  • Things to be aware while doing SAP Upgrade on IBM AIX

    Hi,
         We are migrating from HP Unix platform to IBM AIX through our new project.
        Could you please let me know the risks of doing SAP Upgrade on IBM AIX Platform and  things to be aware while doing SAP   Upgrade on IBM AIX.
    Regards,
    Farhana

    Hi,
    You need to refer to respective system copy guide and upgrade guide to know about pre-requisites before doing migration and upgrade on AIX platform.
    Practically there are no major issues seen on AIX platform during migration as well as during upgrade.
    Hope this helps.
    Regards,
    Deepak Kori

  • The following error occured while searching for on-premises exchange server

    I've previously posted this under the Exchange Forums - Exchange Server 2010
    I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
    did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
    When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
    No problems - [email protected]
    Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
    Add a user account and assign a user role
    Getting "Unexpected error occurred" when Setting up an e-mail account for user
    Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
    The user account is created ok just no e-mail address is created for the user
    I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
    When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
    The following error occurred when searching for the On-Premises Exchange server
    When I try to open Microsoft Exchange Management Shell, I get a similar error
    I've download & run EMTShooter which just identifies there is an error & gives me the same error
    I've installed & re-installed WinRM IIS Extensions
    I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
    Still cannot connect to Exchange
    I've trawled through the internet for two days checking & testing every solution but no luck
    I've checked every setting against another Windows SBS 2011 Server we've installed & works
    I cannot find a difference
    Can someone help me or point me in the right direction?
    Peter Ralphs

    Thanks for the reply Larry
    I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
    or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
    Here's the original error I was getting when opening Exchange Management Console
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I got similar error when trying to access the Exchange Management Shell
    VERBOSE: Connecting to SERVER.myd.local
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
    For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],                          
    PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionOpenFailed
    When I opened the Exchange Management Console this week, the error had changed slightly
    Initialization failed
    The following error ocurred while searching for the on-premises Exchange server:
    [server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
    see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
    I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
    This is the result of the Health Check Scan
    Organization: First Organization
    Default Global Address List Changed
    The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
    -eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
    -eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
    Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
    The default public folder database is remote
    The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
    Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
    Server: SERVER
    Disk timeout changed
    Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
    Client RPC binding found
    The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
    One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
    Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
    I also noticed that the Health Check stated that "The default public folder database is remote"
    Has this something to do with it ?
    Regards
    Peter

  • "The following errors occurred while trying to open this page." Why?

    Dear all,
    I'm running an online store at http://bubblething.com. I created it with iWeb 08. It crashed and I've been trying to recreate it, partly from images retreived by Apple from their "webarchive" and partly with images created fresh. I But I keep getting a dropdown error box saying "The following errors occurred while trying to open this page." Then there's a list of the missing images, and the images are all crossed out on my page. This seems to be happening unpredictably, sometimes just a few days after I've worked on the page. What's happening? Is it because somehow I've moved files, and the links to the images are broken? Please help!

    Safari > Preferences > Privacy > Cookies and website data:
    Click “Remove All Website Data” button.
    https://support.apple.com/en-us/HT203370

  • WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

    I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
    in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
    I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
    but that didn't gain me anything.
    I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
    I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
    PowerShell Error:
    Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (:) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionStateBroken
    winrs Error:
    Winrs error:
    WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config.

    Hi Adam,
    I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
    WSMAN/<NetBIOS name>
    WSMAN/<FQDN>
    If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
    Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
    If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
    just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
    If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
    this to learn a bit more about selective trusts and whether or not it's affecting you.
    Cheers,
    Lain

  • Following error occurs while oracle client 10g installation on Linux 5

    Following error occurs while oracle client 10g installation on Linux 5
    [oraclient@SVHJ0678 client]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-04-14_02-30-53AM. Please wait ...[oraclient@SVHJ0678 client]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-14_02-30-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)

    user8862191 wrote:
    Following error occurs while oracle client 10g installation on Linux 5
    What is Linux 5? Do you mean Oracle Enterprise Linux (OEL) 5 ???
    [oraclient@SVHJ0678 client]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-04-14_02-30-53AM. Please wait ...[oraclient@SVHJ0678 client]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-14_02-30-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)

  • Cisco SSL VPN "The following error occurred while attempting the file operation: Unable to view the contents of the Domain/Workgroup. "

    Hey People, 
    Ive set up an SSL Clientless VPN on the Cisco 2821. Ive set up WINS, and the NBNS entries in the VPN config. When i log onto the VPN , i can access the file servers by typing in their names in the network fi
    le box, but when i click browse network and select the network name i get the following message
    "The following error occurred while attempting the file operation:
    Unable to view the contents of the Domain/Workgroup. "
    Has anyone come accross this before?
    Im using Windows Server 2008R2 for the DC, Windows Server 2003 R2 For WINS and File Sharing. 
    The connection goes WAN->BROADBANDROUTER>CISCO2821
    Any helo would be much greatly appreciated. 
    Thanks in advance! 

    Please see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=An+error+occurred+while+attempting+to+establish+an+Applications+File+Server+connection+with+the+node&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • HT4623 When i try to update...after a while it will give me a message saying that(( an error occurred while downloading the ios 6.1.2))

    When i try to update...after a while it will give me a message saying that(( an error occurred while downloading the ios 6.1.2))
    while the wifi is working normally, and i updated my ipod and it worked normally.
    I think i have a problem with my iphone..
    Please helpe to solve this issue.
    Thank you.

    Something temporarily wrong with your internet connection?
    Be aware that this is a very large file to download, it needs a strong consistent internet connection.
    Have the iPhone on the charger cable too.
    In the meantime read the threads in this forum about the visibility item and some other possible issues on the 4 and 4S (although a large number of people have these issues, it is still a minor percentage, but anyhow, be aware).

  • TS3694 I have tried to update my ipod to version 5.1.1 and everytime while backing up, around the same spot it says, An error occurred while backing up this ipod. (-43) would you like to continue to update this ipod? Continuing will result in the loss of

    to version 5.1.1 and everytime while backing up, around the same spot it says, An error occurred while backing up this ipod. (-43) would you like to continue to update this ipod? Continuing will result in the loss of all data

    Try a manual install, as outlined in link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

Maybe you are looking for