While creating stock using tcode: mb1c
THE ERROR : "POSTING PERIOD 001 2012 IS NOT OPEN"
how to resolve the above ticket
Edited by: b.sasibhushanam on Jan 10, 2012 12:46 PM
Moderator message:
Locked. Reason: basic question which has been discussed many times....
Please try to search and find answer on your own. If you cannot, please come back by providing a correct description of your problem.
And please use capitals properly.
Please also read forum rules.
Edited by: Csaba Szommer on Jan 10, 2012 8:34 AM
Hello Sir,
Please change the Period using the current date in the T-Code MMPV.
Regards,
Yawar Khan
Similar Messages
-
Error while creating stock using tcode: MB1C
Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not existHi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu -
While creating new stock using Tcode-MB1C
Dear sir,
I am getting an error - posting period 001 2012 is not open.
Thanks in Advance,
Sasi.
Edited by: Csaba Szommer on Jan 11, 2012 6:59 AMhi, basic question (should check old threads before posting questions).....
check below thread
while creating stock using tcode: mb1c
yogesh -
Error while creating form using tcode HRFORMS.
Hi All,
I am trying to create a payslip in tcode HRFORMS. while generating the program I am getting an error message stating "Generated program /1pyxxfo/znr_pay_stmt_prnt contains syntax errors".
Has anybody faced these type of error. Do I need to do any config set ups before using tcode HRFORMS? Please help me in this regard.
Thanks,
V.NagarajuHi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu -
Created a material and want to post by using tcode mb1c, not allowing.?
friends i have a problem here, i created a material for my sales order. i wanted to post like 100 of them in my storage location. so i used tcode mb1c, entered the storage location , plant along with the movment type 561 . it goes in and there i enter the material and and the number to be posted (number of materials) .while saving it it gives the error ."posting period 008 2007 is not open" i had earlier encounterd with error saying some previous dates were closed and i used to closed the previous periods by tcode mmpv and bring it to the present date. but this is the first time when i am seeing that the present period is closed . . i tried with omsy and mmrv also. but i dont know what to do now. how can i open current months posting. i am in sd. dont have much idea about what mm guys do. please help .
Hi Seema,
In general, after creating ES, Cstmr,Matrl we need to execute MMPV before posting material. But in your case the periods are already closed, could be bcz some FICO consultant might have worked on it. But in order to resolve your problem u give a try to following prcdr.
Go to TCode OB52 [Posting Periods] and in the EIGHT column under heading YEAR change it to 2007 for the ROW "+"[Account Type]. Then proceed to MB1C.
In addition to this U may come across No. Range issue for which U uses TCode-FBN1; here for the current Yr. [2007] U have to give the No. Range for the interval appearing in the Error, eg 49,50,51...
Still if the problem persists consult a FICO for some alterations on the same screen [TCode-OB52].
Hope it might help U and reply the same to me
Regards. -
Error while uploading stock using Mb1c and migo
Hi
Following error is showing,while uploading stock using Mb1c and migo
Return code 8 is not permitted with BAdI 'FAGL_PERIOD_CHECK'
Can anyone help me?/
ThanksHi
You will need the help of an abaper in solving this , as a BAdi FAGL_PERIOD_CHECK - Posting Period Check has been activated.
Please check the implementation of the BAdi , i feel that it has not been implemented properly.
This Business Add-In (BAdI) enables you to extend the existing check of open posting periods.
The result of the period check is provided to you as a parameter (CH_SUBRC). In your implementation, you can derive this parameter again (for example, if a posting is rejected under a certain condition).
The following values are allowed for parameter CH_SUBRC:
0 Posting allowed
4 Period & is not open for account type & and general ledger &
6 No authorization for posting period & &
This is a custome developemnt , so only the ABAper present at your end will be able to resolve it.
Thanks & Regards
Kishore -
Error in creation of stock thro Tcode MB1C
Hi,
while creation of stock thro Tcode MB1C i got the error posting period mentioned as 12/2002 to 11/2002.
I tried using Tcode OMSY to update my company's period and year as current year but it is grayad out.
Please advise
Regards
RamyaHi,
OMSY setting is used only for once & for all to fix up the Initial Period and Year for a company code for material management. After setting in OMSY, nobody should touch this setting.
Now 1st check in MM side in MMRV t.code which period open for your company code & back posting allowed or not. If period 11 & 12 not open, you can open in t.code MMPV
And also check in FI Side in t.code OB52 which period is open for in all Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts types . If periods 11 & 12 not open, you can open for all account types.
Note:
Check your fiscal year variant for your company code in OBY6 t.code. If it is K4 , then open periods {Period start from January(01) & end in December(12)}. If it is V3 , then your periods {Period start from April(01) & end in March (12)}
Regards,
Biju K -
Error while create stock without order_MB1C_Mov 521
Dear Experts,
we have creating new plant with reference to old plant. While create stock through MB1C with movement type 521, system given the error message "Busi area 1A not allowed for CoCode 1100; Check whether Busi area is blank" Message no. /EACA/GL_TOOLS006.
Please help
Regards
BK GAIKWADSorry to late replay,
We have tray to use another movement, but same error message occurred. Also we have already assign the plant in OKB9 & OMJ7. please advice.
Regards
BK GAIKWAD -
Getting error while creating subsite using custom template in sharepoint2013
Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Entity Attributes are not populating while creating EO using EO wizard.
Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
SagarikaPlease ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ -
Scrollbar appearing while creating pdf using AlivePDF
Hi,
I am facing a problem while creating pdf using AlivePDF.
I have a VBox on which I am adding multiple pages. If the content overflows it shows scrollbar. All this is working fine.
[PHP]
<mx:VBox x="0" y="80" width="705" height="560" id="content"></mx:VBox>
[/PHP]
When I create the pdf using the following code it shows scrollbar in generated pdf (attached screenshot) while I want all the content without scrollbar
[PHP]
var pg:DisplayObject;
pg = content.getChildAt(i);
var pdf:PDF;
pdf = new PDF (Orientation.PORTRAIT, Unit.POINT, Size.LETTER);
pdf.setDisplayMode(Display.FULL_WIDTH);
pdf.addPage();
pdf.addImage(pg, new Resize(Mode.FIT_TO_PAGE, Position.CENTERED ),0, 0, 0, 0, 0, 1,true,'PNG',100);
[/PHP]
Please suggest what changes should I make to fix this.If the report didn't change, then perhaps the data did. Check
to make sure the data being supplied to the report is as expected.
I have run into mysterious errors where an expected value was of
the wrong type or a required value was now blank. It is also
possible to have existing logical errors in an iif() or other
dynamic evaluation expression that was not previously examined;
until now. So, is there any unexpected or exceptional data the
report cannot handle? -
Problem creating basic views while creating materials using idocs?
hello,
I am facing an issue while creating materials using idocs. The problem is that the basic view does not get created whereas other views are present. The function module used is idoc_input_matma01 and the basic idoc type is MATMAS03.
Looking for help. Thank youHi Madhu,
Actually i recieve an idoc from PI containing data required for cretion of the material via an idoc. This idoc is then processed to create the required material.
The material gets created with appropiate data in various tables(mara, makt) but when we view material in mm03 we cant see the basic data views. -
Problem while creating assets using BAPI
Use table enhancement BAPI_TE_ANLU
Diagnosis :The BAPIs for creating and changing assets currently support only those customer enhancements that relate to the user fields created using SAP enhancement AIST0002.
Can anybody give the appropriate solution why this error is coming while creating assets using BAPI.Looks like you are trying to transfer custom fields into the asset master data that were not added following the steps in enhancement AIST0002.
Using EXTENSIONIN parameter, you can transfer user fields from the asset master record. However, it is not possible to transfer fields that are updated in user-defined tables. Only user fields that were defined using SAP enhancement AIST0002 and are automatically updated in table ANLU can be udpated in this way. This means you have to use table extension BAPI_TE_ANLU.
Enhancement AIST0002 contains function module EXIT_SAPL1022_001 as a component in which user fields can be implemented.
The documentation ( BAPIPAREX) of the structure that forms the basis for this parameter contains additional information about using this parameter.
Please check how table ANLU has been enhanced and also go through the documentation of enhancement AIST0002.
Regards,
Shyam -
Issue while removing stock using MB1C - 562
Hi,
Our client has few materials for which batch number is captured in small alphabets and now when we are trying to remove stock using MB1C - 562 system gives error of Deficet Qty as it automatically changes small letters to CAPITAL letters as soon as we press enter on MB1C. We are doing stock removal activity as client is migrating from old SAP system to ECC and we have to remove stock data from old system.
We are using an ABAP program for removing stock but in background it uses MB1C - 562 mvt type but for few materials we are getting this issue of small letters.
Please let me know if there is any way we can remove these stock records with small letter batch number via 562 mvt type
Thanks,
VihaanAs I already said: no matter what movement type you use, you cannot make SAP posting this batch number.
Find out the way how this stock was posted into SAP. and use the same way to get it off SAP.
I think you have to convert the batch number into capital letters before you can goods issue the stock. For this you may need to create an own report that does a hard update in SAP tables MCHA, MCH1 and MCHB (maybe more ... I cant look into your system, you may have to contact SAP to get help which tables need to be amended or which conversion exit needs to be switched off) -
Error while creating Resource using GDS
Hi
Iam trying to create Resource using GDS and it is throwing me error
clresource: (C189917) VALIDATE on resource egateq00-haegate_reg-res, resource group egateq00-rg, exited with non-zero exit status.
clresource: (C720144) Validation of resource egateq00-haegate_reg-res in resource group egateq00-rg on node uhegateq02 failed.
clresource: (C891200) Failed to create resource "egateq00-haegate_reg-res".
This is the command I executed
rclresource create -g egateq00-rg -t SUNW.gds
-p Scalable=false -p Start_timeout=120 -p Stop_timeout=120 -p Probe_timeout=30
-p Port_list="23001/tcp" -p Start_command="/egateq00/scripts/reg_START.sh" -p Stop_command="/egateq00/scripts/reg_STOP.sh"
-p Probe_command="/egateq00/scripts/reg_PROBE.sh" -p Child_mon_level=1 -p Network_resources_used=egateq00-lh-res -p Failover_enabled=FALSE
-p Stop_signal=15 egateq00-haegate_reg-res
The log under /var/cluster/logs/DS says following
07/01/2008 17:56:43 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
07/01/2008 17:56:43 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
07/01/2008 18:13:23 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
07/01/2008 18:13:23 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
However, I can open these scripts and run it from anywhere. I also tested these scripts and they all work fine. They are all set to chmod 777 , so everyone should have execute permission
Iam not returning any return value from these Start and Stop script , is that the why it is failing
thanksHi
I disabled the PMF as described on the http://blogs.sun.com/TF/entry/disabling_pmf_action_script_with. This is what I did
1>Added following line in the top of my Start script
while getopts 'R:G:' opt
do
case "${opt}" in
R) RESOURCE=${OPTARG};;
G) RESOURCEGROUP=${OPTARG};;
esac
done
sleep 60 &
/usr/cluster/bin/pmfadm -s ${RESOURCEGROUP},${RESOURCE},0.svc
2>While creating the resource , I used property for Start_command="/egateq00/scripts/reg_START.sh -R %RS_NAME -G %RG_NAME"
Now , after doing this , My RG is not getting lost. Also , in the message file I do not see the errors of "Start script failed to stay UP"
However, My Application is not started either.
This is what the message file says
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_validate> completed successfully for resource <egateq00-haegat
e-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
Jul 3 16:43:32 uhegateq01 Cluster.CCR: [ID 973933 daemon.notice] resource egateq00-haegate-reg-res added.
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_svc_start> for resource <egateq00-haegate-reg-res>,
resource group <egateq00-rg>, node <uhegateq01>, timeout <120> seconds
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_svc_star
t>:tag=<egateq00-rg.egateq00-haegate-reg-res.0>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, .
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_svc_start> completed successfully for resource <egateq00-haega
te-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 2% of timeout <120 seconds>
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_monitor_start> for resource <egateq00-haegate-reg-re
s>, resource group <egateq00-rg>, node <uhegateq01>, timeout <300> seconds
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_monitor_
start>:tag=<egateq00-rg.egateq00-haegate-reg-res.7>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1
, ...)Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_monitor_start> completed successfully for resource <egateq00-h
aegate-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
4>Also , in the /var/cluster/logs/DS , I see the Start script started succesfully
07/03/2008 16:43:32 uhegateq01 START-INFO> Start succeeded. [egateq00/scripts/reg_START.sh -R egateq00-haegate-reg-res -G egateq00-rg]
5>Also , in the /var/cluster/logs/DS , I see the Probe script returning 0 , but this is wierd because it should return Non zero number. When I run the Probe script from the command line , it is returning me non zero value when the application is down
07/03/2008 16:43:35 uhegateq01 PROBE-INFO> The GDS monitor (gds_probe) has been started
07/03/2008 16:44:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:44:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:45:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:45:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:46:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:46:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:47:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:47:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:48:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:48:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:49:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:49:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:50:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:50:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:51:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:51:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:52:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:52:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:53:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:53:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:54:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:54:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:55:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:55:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:56:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:56:35 uhegateq01 PROBE-INFO> The probe result is 0
Maybe you are looking for
-
Can I create a dynamic dictionary object in WF using SPD?
I am creating a list of task in a loop. I need to store the taskIDs in a dictionary object. How can I do this? The loop looks like: Loop N times-->Create a task-->Add Task1-TaskID to Dictionary object-->Loop Example of how the dictionary object shoul
-
Hello all, We are storing some images in Oracle 9i as BLOB type. The actual size for most of them is about 150K (0.15MB). However, when the upload is complete the size of each file in db is approximately 3.5 MB. Is something is wrong with table defin
-
Scrollable Frame causing viewer on iPad 1 to close
Hello, I am about to launch my magazine on the iPad, just need to send the App for Apple's approval. Unfortunately I am facing the problem above when changing orientation on iPad 1, and I don't like the idea of launching a "buggy" product. The scroll
-
CC Desktop App won't open...
CC website shows the Desktop App is working fine, but it will not open on my end. Even after update?
-
Focus switch to finder after Security Update 2006-001
Just updated with Security Update 2006-001 on PB G4 running 10.4.5. While running Safari or Mail or any App. and not using the app (like when reading a webpage or mail message) the focus of the OS switches to the Finder after about 10 seconds or so.