While debuging rfc I'm getting some problems..

HI Guys,
While Debugging RFC's, when passing values to parameters they are entering to BAPI Return,but for some values they are not entering to BAPI Return..
Its very Urgent..Please Rectify As soon as possible
With Regards
kirankp

Hi,
I guess this problem is specific to the BAPI which you are invoking remotely.
It might be giving different output returns on different inputs parameters.
Please provide more detail for making the problem more clear, if issue aint resolved.
Regards,
Tanveer.
<b>Please mark helpful answers</b>

Similar Messages

Mini is getting some problems

For awhile now, my lil ole mini has been having some issues with varies programs: Firefox, Safari & iTunes. the problem is, im getting the beach ball more frequently then ever now and 99.9% of the time, i have to end up force quiting the program. not only that, but my mini has been acting a lil slow now lately. I checked my activity monitor and nothing out of the ordenary. I leave it running 24/7 and have it sleep at night during the essential hours. I also use YASU from time to time, and still, i have been having some problems. I love my mac, OS X is much more reliable than my two windows PC's but im finding it hard to keep on getting beach balled every so often. any programs or tricks i can do to fix this problem?

And I would suggest upgrading your RAM, it makes a huge difference.
Also shutting down your computer once in a while (every 2 or 3 days) does do it good. And make sure it's not overheated.
Although more RAM always will make your Mini more responsive, 512 MB should be more than adequate if you're not doing anything really mindblowing.
Also, I don't think shutting down the Mini is going to give you much benefit, unless it is indeed overheated.
As the previous poster recommended, checking/fixing permissions and using those two cleanup programs should help. If not, post back here and we can go through more steps.

I'm getting some problems with mDNSResponder

These messages keep appearing in the log:
6/22/11 5:21:34 PM mDNSResponder[16] ERROR: mDNSPlatformWriteTCP - send Broken pipe
6/22/11 5:21:34 PM mDNSResponder[16] ERROR: mDNSPlatformWriteTCP - send Broken pipe
6/22/11 5:21:34 PM mDNSResponder[16] tcpConnectionCallback: error writing
The symptoms seem to be that it apache cannot retrieve some files (this is happening mostly with css files for some reason)
Running 10.5.8
Apache 2.2.17
PHP 5.2.15
Setup:
I have my system set up with some virtual hosts for some web sites I'm developing. In my /etc/hosts file, I have the following:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1    localhost miishka.local miishka transadvice.miishka.local transadvice portfolio.miishka.local portfolio inabwiki.miishka.local inabwiki inabwww.miishka.local inabwww ttwiki.miishka.local ttwiki
255.255.255.255    broadcasthost
::1             localhost
fe80::1%lo0    localhost
# other machines
192.168.1.1    router lynksys
192.168.1.100    paladin.local paladin macbook lappie
An example of one of the vhosts is:
<VirtualHost *:80>
    ServerName ttwiki.miishka.local
    ServerAlias ttwiki
    ServerAdmin tamara@localhost
    DocumentRoot "/Users/tamara/Sites/tamaratemple.com/subdomains/wiki/httpdocs-dev"
    ErrorLog "/Users/tamara/Sites/tamaratemple.com/subdomains/wiki/logs/error_log"
    CustomLog "/Users/tamara/Sites/tamaratemple.com/subdomains/wiki/logs/access_log" combined
</VirtualHost>
If just browse to the web page http://twiki/, i get the contents but not the styles. Looking at the source, the style sheet declaration is:
<link type="text/css" href="http://ttwiki/pub/skins/marinee.mine/style.css" rel="stylesheet">
If I use curl on that same link, I can obtain the css file no problem.
So I'm pretty stumped.

Try here > Can't connect to the iTunes Store
and here > iTunes for Windows: Network Connectivity Tests

Error while debugging a FM to get pricing condition details

Hi,
when debugging the FM PRC_PD_HEAD_SHOW ( SPC_GET_PRICING_CONDITIONS ) to get the pricing condition details i am getting an error java debugging back end on sapdevsystem is waiting for port 8003.
Is this bcoz java not properly installed in my system. Can anybody pls tell me how to solve this issue.
Thanks,
Leena

Did not get any answer.. so found all the dates by particular tables a*** from pricing.

Get Some Problems when Installing Exchange 2003 Portlet

Hi,
I am trying to setup exchange 2003 portlet, all the prerequisitions are done. I follow the installation guide (http://www.oracle.com/technology/products/ias/portal/point/exchange2003/installation.html) and all works well till to step 6(Test the ASP page access to the sample Exchange 2003 mailbox). I am sure all the parameters passing in the url are correct, but still get and http not found error.
I have referenced the thread here(Re: Installing Microsoft Exchange 2000 Portlets which said that the cdo lib should be registered first. But i still have this problem after i have register the exchange server 2003's cdo lib which version should be 1.21. So i am wondering whether the cdo version is restricted, if it does, which cdo version should i use in Exhcange 2003 environment? the 2000 one?
i will appreciate anyone who gives me suggestions or hints to solve this problem.
Thanks in advanced.

Hi,
Are you looking for Customizable portlets (Task,Calendar,Mail,Contact) for Exchange Server 2000/2003 on Oracle Portal Server ?
do let me know..
nJoy Work
~Neeraj Sidhaye
try_catch_finally @ Y !
ExtremePortal @ Gmail dot com

I am trying to register on windows azure using credit card and getting some problem.

Hi,
I'm trying to register on the Windows azure and everything works fine until I get into the Payment Information (Step #3) screen. I’m trying to pay with my Master Card but I receive the following
error message:
We can't authorize the payment method. Please make sure the information is correct, or use another payment method. If you continue to get this message, please contact your financial institution.

Hi,
It is a common issue for registration. It is really hard to find where is wrong. What I can suggest you is first double check the credit card information which is valid and correct. Check your LiveID with correct and enough data to meet any related
information during registration. Of course, make sure the country of the credit card is available in the list of Windows Azure. Also as the message says you can consult the financial institution for the payment method. You can try these channels for help:
https://support.microsoft.com/oas/default.aspx?gprid=17024&st=1&wfxredirect=1&sd=gn
http://support.microsoft.com/gp/customer-service-phone-numbers
Thanks,
QinDian Tang
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

In BAPI creation iam getting some problem plz help me in this issue?

Hi All
    I am new to BAPI.
    I did one program by watching the below link
    http://www.saptechies.com/step-by-step-procedure-to-create-bapi/
    By watching that tutorial iam able to develop up to the creation of BAPI.
    While the releasing of my BAPI object its showing the following error
    Released object types must be transportable.
    While the releasing the method its showing the following message
    Object type components have higher release level than oject type.
    If any one knows how to resolve this issue please help in this topic
    Thanku.
Regards,
K.S.L.Neelima.

Hi Neelima,
As the error message shows: Released object types must be transportable
This means you have saved the object type also as local object under $tmp. You should not do this. Create the object type under any dev package and then try releasing it. This will work for sure.

Enhancement not detected while debugging

I have a standard program SDORDE01, in which i need to add one field.
I have made an enhancement but there is no data in that field.
while debugging,enhancement is not getting detected.
can somebody please help??

Hi,
i had the same issue . I put a break <userid> statement and transported to QAS. in QAS i used the <userid> to test it. then the spot started functioning. After that I commented the break point and transported again.
regards
aromal

Facing some problem while configuring Workflow Manager 1.0.

Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh Agravat

Rajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation.

I am getting some errors while distilling the post script file.

I am getting some errors while distilling the post script file. please check and suggest me, how to control this?
<PDFX ISO="15930-1:2001" COMPLIANT="true">
PDF/X Compliance Report
1. Summary
   Warnings: The total found in this document was 0.
   Violations: The total found in this document was 0.
   No problems were found in the document.
   This document passes PDF/X-1a:2001 compliance checks.
</PDFX>
Regards,
Jack

@Jack – you were using a joboptions file by Distiller to convert a PostScript file to a PDF/X-1a.
What you get is no error message, just a report, that everything went ok. And in this case I cannot see any advantage using PDF Export for printing to PostScript/distilling to PDF. Ok, maybe one, CS5 and above would export in a background process.
To prevent InDesign flattening transparency, you could use PDF/X-4 as your export setting. You cannot use writing to PostScript for that task.
Check including tags for tagged export to prevent misalignment of text because of a strange bug with PDF Export when you are using 9pt text on 12pt leading or text with a ratio of 9/12 for point size and leading in multicolumn text frames.
Uwe

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 250
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Stickies    Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    npsf_cef: Version: sf 3.3.1.1 [Click for support]
    Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
    DivX HiQ
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 999.86 GB
        Total number of backups: 60
        Oldest backup: 2012-07-15 01:16:54 +0000
        Last backup: 2015-03-29 19:28:06 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        97%    rapportd
         3%    WindowServer
         1%    mds
         0%    fseventsd
         0%    distnoted
Top Processes by Memory: ℹ️
    155 MB    Safari
    120 MB    Finder
    86 MB    rapportd
    86 MB    WindowServer
    69 MB    mds_stores
Virtual Memory Information: ℹ️
    12.56 GB    Free RAM
    2.53 GB    Active RAM
    428 MB    Inactive RAM
    1.66 GB    Wired RAM
    1.04 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 06:00:15 PM    Self test - passed
    Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
    Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
    Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
    Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
    Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
    Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
    Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
    Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

While installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

while installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

I am running Windows 7 and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...

While debuging rfc I'm getting some problems..

Similar Messages

Maybe you are looking for