While deleting the query is shows error: errors: components (version A )

Hello All,
when deleting the query from Bex Query designer it shows the below error message but its showing using TC rszdelete.
using the BI AddON 7.X,Support Package 11,Revision 634.
Status Messages
errors: components 4lsxxxx (version a) do not exist on the database
errors: Element 4lsxxxx (version b) do not exist on the database
errors: components 4lsxxxx (version b) do not exist on the database
double the log it showing
Diagnosis
You have attempted to open query 4LT1JF8BXKJMK73TNIY15TRF0 from the Query Designer. However, this query does not exist in the database in the system to which you have made a connection.
System Response
Opening the query was terminated.
Procedure
Make sure that you have connected to the correct BW system. Note: The query may have been deleted by another user.

Hi,
>lower support package 5 its not showing the error message
:-D
SAP develops sometime bull ****.
=> there is no reason to show this message in the front end.
=> Sometimes I don't understand SAP procedure.
Nobody is interesting in this message. I have deleted this query. It's normally that this query isn't on the server now.
=> I know this message since years.
=> but nobody create a OSS message, or SAP corrects this feature.
Sven

Similar Messages

While executing the query getting an error u2018Page Not Foundu2019 in the bowser.

Hello,
I opened a Bex Query in Query Analyzer and clicked on the Execute button to execute the query in our portal site. But I am getting an error u2018Page Not Foundu2019 in the bowser.
As I am new to BI,Kindly guide me through the steps.
what all setting needs to be done?
Regards,
Rachel

Hi,
The Path is C:\WINDOWS\system32\drivers\etc\hosts
You need to update "host file" in your server/in your PC. So ask Network people to do it and also you need to change your browser LANsettings.
Eg: 11.11.8.161 BWQ1 BWQ1.***.com
Like above you need to change in your host file.
Thanks
Reddy
Edited by: Surendra Reddy on Nov 27, 2008 8:12 AM

While deleting query it shows error: errors: components (ver A)do not exist

Hello All,
when i delete the query from Bex Query designer i am getting the below error but its working fine with TC RZDELETE.
SAP BI AddON 7.X,Support Package 11,Revision 634
Status Messages
errors: components 4lsxxxx (version a) do not exist on the database
errors: Element 4lsxxxx (version b) do not exist on the database
errors: components 4lsxxxx (version b) do not exist on the database
when i double click the message it shows
Diagnosis
You have attempted to open query 4LT1JF8BXKJMK73TNIY15TRF0 from the Query Designer. However, this query does not exist in the database in the system to which you have made a connection.
System Response
Opening the query was terminated.
Procedure
Make sure that you have connected to the correct BW system. Note: The query may have been deleted by another user.
Edited by: Ranga123 on May 18, 2011 3:00 PM

Hi,
>lower support package 5 its not showing the error message
:-D
SAP develops sometime bull ****.
=> there is no reason to show this message in the front end.
=> Sometimes I don't understand SAP procedure.
Nobody is interesting in this message. I have deleted this query. It's normally that this query isn't on the server now.
=> I know this message since years.
=> but nobody create a OSS message, or SAP corrects this feature.
Sven

While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Error While downloading the file A server Error has occurred, please try again later Downloading Yahoo mail Application Attachments Trying to download My Photos and movie 3 items so i can delete them all

I have icloud and a new iPhone5 ! They work good , took pictures and a few short movies, plugged in my phone to my iMac transfered Items to iPhoto then inported items to iMovie. when getting to know what i was doing i decided to delete pictures and movies i no longer wanted. when i looked for a few missing items i opend Finder and there some where buyt i had already trashed them and deleted the doubles. Still could not find missing pictures and movies 3 items and today after calling yahoo about a different complant with sending feed back for Yahoo mail Applications login . i opened up Attachments Not the Large Attachments just Attachments and there were the 3 items i had been hunting for to Trash and delete. the mail Attachments file does not have the Option to delet Files and photos and movies. When i tried to Download the 3 items a window shows up that says Error While Downloading the Files, A Server Error has occured, please Try Again later. nothing works how do i remove the Trapped photo and movie Blank Files and trash them? Onece they get into my downloads i can do something with them as i understand. That part of it kind of keeps me in Question also because why should i have to down load my own files of Attachments / Pictures and movies if they are comming from my iMac? How much better is iLife11 then iPhoto08 and iMovie08 . Thanks Greg

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Database Error while running the query.

Hi,
While running the query in webi rich client i am having a "database error IES 10901 and WIS 10901" , it is showing that the data source name not found and default driver is not specified.
I am trying to generate report from efashion universe which is in .unx format, same client version and universe is running fine on another machine (webi rich client).
PS: The above mentioned universe is running fine on my BI launch pad, the problem is with webi rich client only.
Please help!!

Hi,
Which Database your are using .
As explained by Yuvraj You need to install driver for specific database .
Ask for client or (your Database ) driver from administrator .
After installation you can see your database Driver in following path
Control Panel\System and Security\Administrative Tools\Data Sources (ODBC)
See in Drivers Tab .
If you are using oracle & client is install on your system then Check TNS Names File in NETWORK folder .

RC 8 error while transporting the query from Dev to Qa - Element missing

Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
     Start of subsequent processing ... 20110517070025
     End of subsequent processing... 20110517070045
Kind regards,

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

Error while deleting the confirmation- Reason has to be entered for 102

Hi,
When i try to delete the confirmation for Goods, an error -"A reason has to be entered for movement type 102" is occuring. I have maintained the reason for rejection in the document tab at the line item level while deleting the confirmation.The reason for movement field is mandatory in R/3 system for movement type 102. I have maintained this reason for rejection that has maintained in the R/3 system in the SRM config and able to select that during deletion of confirmation, but still i am getting this error. Please suggest.
Regards
GGL

sorry for the very late reply..
Note 1345896 - Error due to reason for movement when deleting the GR in EBP
When we try to delete a goods confirmation with the Reason for Rejection text in SRM, we get the error "A reason has to be entered for movement type 102" (M7 325) thrown from the backend R/3 system.
Other terms
M7 325, RREJ, Reason for Rejection, MOVE_REAS, c_subtype_ca, LBBP_CFF60, FORM mapping_gr_for_backend.
Reason and Prerequisites
This is caused by a program error
it helps aothers too

Error While deleting the Profit Center

Hi I am getting the below error while deleting the Profit center. Please help me how to fix this issue...
Profit center Scenario was activated in New GL Accounting
what configurations do i need to change to fix this error? Kindly advise me..
Thanks
Kishore

Dear,
while deleting the profit center we have to requrie follow the steps
1) OBR1 - Reset Transaction data
2)OBR2 - Reset the master data
3)OKKS - Set Controlling Area
4)OKC3 - Delete Transcation Data
5) KL14 - Delete Activity Types
6)OKE5 - Profit center De - Active
7)OKE1 - Profit center Transcation data delete
8)OKE2 - profit center delete
if if you follow above steps easily we can make the delete the profitcenter and we donot have to activate profitcenter
i hope solve you r problem
With regards /G chandu

Error while deleting the agreement

Hi,
I am facing the following error while deleting the agreement.
There was an error deleting agreement.
Error -: AIP-16015: Delete of Internal Delivery Channel Usage failed with error: Cannot delete Internal Delivery Channel Usage which is referenced by Participant Delivery Channel
Error -: AIP-16011: Cannot delete Internal Delivery Channel Usage which is referenced by Participant Delivery Channel
We are getting the same error while deleting the individual TP participants from the agreement.
I don't have any agreements deployed on the B2B.
Can you please let me know the reason for this error?
Regard,
Ravi Shah

Please refer B2B Error:- AIP-16015 and AIP-16016 when deleting a TP Agreement

Error while deleting the Master data

Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
Hirdesh

Hi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad

Error while running the query on web.

Hello Friends
I am getting the error message "Result set too large (1056716 cells); data retrieval restricted by configuration (maximum = 500000 cells)" while executing the query on the web in BI 2004s. How can this be resolved.
Any help in this regards is appreciated and points will be assigned.
Thanks.

Hi Rishi,
Maybe your queries returned too large volume of data.
So, if possible,
1, create some filter on your query to reduce the transferred data
2, chaange your query structure (reduce the items on the column or low)
and your error message seemed to be generated from BEx Analyzer...
does web report have "cells"?
if BEx Analyzer, the limit of cells volume is inneviable.
and if you use BEx Web, do you know note1008619?
this note describe about the limit of data volume on web applications.
Hope it help,
Kanako

Receiving SQL Error: INTERNAL_ERROR while executing the query

Dear All,
I am receiving the below error while executing a query.
SQL Error: INTERNAL_ERROR
Diagnosis
The database system registered an SQL error. As available, the error number and a description are included in the short text. Possible causes for SQL errors include:
Overflow of database objects such as buffers, temporary tablespaces, rollback segments or data containers/tablespaces.
->These problems can generally be eliminated by system administrators.
Missing generated database objects such as tables or views based on inconsistent or inactive InfoCubes or InfoObjects. Examples of this include the view of the fact table for an InfoCube or the attribute SID table (X/Y table) of a characteristic.
-> These problems can generally be eliminated by a BW administrator.
SQL requests with incorrect content.
-> Problems of this type are generally programming errors.
System Response
Procedure
Contact your system administrator.
Procedure for System Administration
If there is no error description, look for one in the reference from the database producer.
Decide on the correct category for the SQL error and check if it can be eliminated. Generally the error can also be found in the syslog (transaction sm21). From there, transactions sm51 and sm50, the developer's trace log of the work process can be determined and the erroneous statement can be viewed in the log. This procedure is described in SAP Note 568768.
Notification Number DBMAN 257
I verified the table spaces and also done RSRV Repair of InfoObjects and InfoCubes and didnt find any error. But I am receiving this error for one particular month and remaining months are executing fine. Any ideas why i am receiving this error.
Regards
Ravi Y

OSS Note 1305568:
Symptom
A data mart query that
you want to execute within a data transfer process (DTP), for example, terminates with the
SQL error -1013 "Too many order columns".
The following is displayed in the monitor log of the data transfer process:
Error while extracting from source xxxxxx (type InfoProvider)
Message number RSBK 242
Exception CX_SQL_EXCEPTION occurred (program:
CL_SQL_STATEMENT==============CP, include:
CL_SQL_STATEMENT==============CM004, line: 32).
Message number RS_EXCEPTION 000
SQL error: POS(3306) Too many order columns
Message number DBMAN 257
Error reading the data of InfoProvider xxxxxx
Message number DBMAN 305
You have already implemented Note 1065380.
Other terms
CX_SQL_EXCEPTION, message number, RS_EXCEPTION 000, DBMAN 257, RSBK 242,
RS_EXCEPTION 000
Reason and Prerequisites
The MaxDB internal limit of 4016 bytes or 128 fields for GROUP BY columns was exceeded.
Solution
When you implement these corrections, no aggregation is performed for the data (GROUP BY) if the limits of the MaxDB database have been exceeded.
The limit values for the aggregation bahavior can also be manually reduced if there are problems with the default values.
Two RSADMIN parameters are provided for this.
MAXDB_MAX_GROUP_BY_FLDS is the maximum number of GROUP BY fields. The default value is 128.
MAXDB_MAX_GROUP_BY_LEN is the maximum total length of the GROUP BY fields. The default value is 4000.
SAP NetWeaver BI 7.00
Import Support Package 21 for SAP NetWeaver BI 7. 00 (SAPKW70021) into your BI system. The Support Package is available when Note 1270629"SAPBINews NW 7.00 BI Support Package 21", which describes this Support Package in more detail, is released for customers.

No Data Shown because an error occurred while running the query

Discoverer 10gR2 using Plus on Firefox:
I have one workbook. The first sheet summarizes by Vendor. Parameters are Type, Category, Vendor (all optional) and mandatory date range.
The second sheet summarized by Vendor and Model. Parameters are Type, Category, Vendor, Model (all optional) and mandatory date range.
All parameters except the extra "Model" are shared between the sheets.
When I run the Vendor sheet, parameters pop up, I put in dates and leave the rest blank. Results display. Yeah!
When I then run the Model sheet, parameters pop up again (because it has one more parameter). Dates carry forward, leave the rest blank. I get the error No Data Shown because an error occurred while running the query. Refreshing does not help.
If I click back to the Vendor sheet, then come back to the Model sheet, no parameter screen and the query runs.
Booooo.
Have tried multiple DBs, multiple EULs, multiple underlying data sources, replacing the offending parameter with a whole new one, no difference.
Has any body run into this behavior? Is there an answer?
-- Ron Olcott, Business Intelligence Product Manager

What about trying this. On the parameter definition, you have a section on the bottom left of the Parameters window, called "Do you want to allow different parameter values for each worksheet?". When you say in your posting that all but the Model parameter is shared, I assume you mean that you have set this section value to "Allow only one set of paratmeter values for all worksheets". Try setting this to "Allow different parameter values for each worksheet". See if that might make a difference for you. If that works, you may have to leave the option at this, as the lesser of your evils. From my limited experience, the "Allow only one set of parameter mvalues for all worksheets" is a bit flaky in how it works. So I pretty much have gone to always saying to allow different parameter values for each worksheet. Hope this helps a bit. If worse comes to worse, if you have not done so already, log a service request with support and see what they say. Good luck.
John DIckey

Error: An error occurred while preparing the query in openquery on ServiceNow ODBC Link Server

Hi Team,
Greetings of the Day!!!!!
I have a created a link server on SQL Server 2008 R2 databse of Service Now ODBC driver. And written a stored procedure using openquery to get the data from link server.
Now problem is that, when i have scheduled that stored procedure in sql jobs. When this job runs automatically then we are getting below error while when i start the job mannually then it's not giving error.
An error occurred while preparing the query "..........."
Please help me to resolve this issue.
Regards,
Brijendra Pandey

Hi Fanny,
I had reviewed the job history. I am getting below message where as table is exist in the database.
Message
Executed as user: NT AUTHORITY\SYSTEM. OLE DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:incident not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE
DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:sysapproval_approver not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE DB provider "MSDASQL" for linked
server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:problem not found.[10129]". [SQLSTATE 01000] (Message 7412). The step succeeded.
Regards,
Brijendra Pandey

While deleting the query is shows error: errors: components (version A )

Similar Messages

Maybe you are looking for