While displaying Local currency(JPY)....

Hi,
Here when I was displaying local currency for JPY the amount is displaying 188.76 instead of 18,876.
Can any body tell me why it is so.
I am displaying in ALV.
Can I know how to overcome out of this in ALV and in normal reporting.
Thanks in advance.
Message was edited by: Deepak333 k

Hi
check the table TCURX for enter JPY, in this table you can see how many decimals are allowed for a currency.
There is zero decimals for JPY, so 18,876 are stored as 188.76.
If you wrote: WRITE '188.76' CURRENCY 'JPN', you'll see 18,876.
So in your catalog table, for the field amount, you should indicate the reference currency field (CFIELDNAME and CTABNAME) or set JPN in the field CURRENCY.
Max

Similar Messages

How SAP captured the RAW MAT amount from Local currency to JPY.

Hi All,
I've class 1 material when perform maintained receipt found the RAW Mat material was posting wrong figure when convert from Local Currency RM to JPY.
Exp: my RAW MAT amount is material standard price x qty.
Let said my standard price is RM9.61 and the qty is 180 so that my Raw Mat amount is RM1729.80 and exchange rate is 3.718 form JPY to MYR when i display it on document currency the amount show in JPY is 46,440 instead off 46,525.
But when i cancel the document the system do captured the correct amount 46,525.
How sap get this Raw Mat amount?
Thanks in advance.

MYR = Malaysia Ringgit.
The RAW MATT price is correct when in Local Currency which is in MYR but there are the variance when convert to others currency like JPY and USD.

Error while saving the service order "Error determining Local currency"

Hi Gurus,
I am facing a strange proble, while adding components to my service order. The system throws error " Error determining local currency: ER type 'M' date 05.11.2007 from SGD to RMB RC 4 ".
the customer is from singapore and am issuing the material from local plant (every where SGD is maintianed as the currency). We have maintained the exchange rate also between these currencies.
Can anybody throw some light on this issue????
Prase

Closed the thread...

F110 - how to display the local currency

Hi Friends,
I am running the F110 - automatic payment program , after run the proposal i need to show the total amount of document in local currency in the edit or display proposal list how it is possible.
please advice me asap.
Thanks
Pd

Hi,
When you are in edit or display proposal, go in the menu in Goto => Display total.
You can choose the summarization levels, and when you choose Currency you see the total amount in the column "Local currency amount" (at the right of the screen).
I hope it's what you search.
Good luck
Regards
Valerie

Problem with amount displayed in local currency.

Hi Experts,
We have an invoice in XDR/PLN currency (exchange rate: 3,50).
Then we are making a posting with clearing and in result we have a clearing document in EUR/PLN currency (exchange rate: 3,70).
In one line item we are making a posting with an asterisk u2018*u2019 to clear selected open items.
In this line item the amount in EUR currency shows for example 0,10 EUR and amount displayed in local currency (PLN) shows 100 PLN which is value not consistent with exchange rate.
Line item which is causing such difference displayed in EUR shows u201Cnew amountu201D, but this line item displayed in local currency (PLN) shows u201Cold valueu201D from a XDR/PLN document.
This issue causes 0,10 EUR -> 100 PLN u201Cdisplayingu201D problem in an asterisk u2018*u2019 line item.
Why this line item shows the u201Cold valueu201D in local currency from XDR document ?
Thanks in advance,
Konrad Dobrowolski.

Can anyone help ?
I can provide more details if needed.
Best regards,
Konrad Dobrowolski.

FS10N local currency display only

HI SCN ,
In our scenario we have posted a FI Transaction in $1000 in USD .The GL account in FS00 is maintained with USD . The local currency maintained is EUR.
IN FS10N , the report show only EUR and no values under USD.
Let me make it more clear - The FS10 N show say 10 line items under AED. When i select the USD , its showing blank .
What could be the reason ? Please help.
Please note : Its working fine with FS10 and drilldown in FS10N
thanks
Praveen

Hi,
Try changing the display currency from FS10N output. Click F6 from FS10N output to shuffle the currencies. You can find the details of the displayed currency in ALV header.
Note: In overview screen, you can display only one currency at a time.
Thanks,
V V

Setting Local Currency as default display in all accounting document displa

Hi,
I have a Requirement where I am looking to set Local Currency as default display in all accounting document display screen.
Can you please help me here.

Hi,
I already followed this but this is not working. I still getting the FB03 figures by default in the Document Currency only and I have to Click the Display Currency Button to see the Figures in the Local Currency.
Is there is any way by which the Document display in Local Currency only and I don't have to press Display Currency Button to see them in the Local Currency.

"Error in determining Local currency" while saving the service order.

Hi Gurus,
I am facing a strange proble, while adding components to my service order. The system throws error " Error determining local currency: ER type 'M' date 05.11.2007 from SGD to RMB RC 4 ".
the customer is from singapore and am issuing the material from local plant (every where SGD is maintianed as the currency). We have maintained the exchange rate also between these currencies.
Can anybody throw some light on this issue????
Prase

Closed the thread...

Transaction:FS10 Safety supplies:local currency Balances display

Hai,
It is little bit urgent.
I would like to extract data from FS10(safety supplies:Local currency Balances display)..
What is the table name for it?
This is my report format:
GL Descr. OP Balance purchase issues closing balance.
With Regards,
Jaheer,Yanbu,KSA.

Hi,
Try Tcode - FBL3N.
Check report S_ALR_87012282 and then change the layouts as per your requirement.
Tables - FAGLFLEXT (GL totals) OR FAGLFLEXA (GL line items)
OR
Tables BKPF and BSEG.

Getting error while posting the invoice "Different Local currency "

Hello All,
User created Non MRP PO with CNY currency for China and cost center entered which belongs to US country.
User posted invoice for this PO and then he understood that cost center which has been entered in the PO was wrong.
and he tried to cancel the invoice with Tcode MR8M and with MIRO credit Memo as well.
But getting error "Different Local currency from CNY to USD"
How this can be solved,pls suggest.
Thanks...
Trupti

hi
please check that you might have changed the currency of PO
please reset it and then reverse the MIRO
Note 592312 - MIRO: Termination M8396 'Different local currency'
Edited by: Kunal Ingale on Nov 12, 2010 8:15 AM

Balance in local currency while doing MIGO

Hi Gurus,
Below is the message which I am receiving when doing MIGO. Can some body let me know how to solve this
Balance in local currency
Message no. F5703
Diagnosis
A balance exists in local currency "INR" with the following details:
Exchange rate type "10", amount " 82.39-" and currency key "INR".
The data in local currency is transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
There is probably an error in the calling application.
The GL account is "Only in local currency" check box is checked. OB08 settings are also maintained

Hi
The error is in GL code
GO to FS00 GL Master, for your GL
Go to Control Tab and remove the check box which reads "Only Balance Local currecy"
Consult you FI teams once
Niti Narayan

Difference in Local currency and Group currency Balance

Hi,
I have a query where ...
Company code has 2 currencies ;Group currency is USD and Document Currency is GBP
This GL account is zero balance account . It has alredy set up in Document spitting customization setting
Through FB03 normal view we can see the zero balance but while displaying the document general ledger view with option of group currency ; it is showing zero balance for the local currency and balance amount for group currency USDu2026
Can I get any suggesion where should I need to check for this?
Thanks in Advance

Hiten,
We are on ECC6.0. For us the problem is ongoing production orders.
Based on SAP notes about excluding zero balance orders from settlement process, I tried to close such orders but system does not allow it as it sees the parallel currecy balance.
Thanks,
Sanjay Wagh

0.01 price difference local currency amount (not due to forex)

Hi All,
I have this strange system behaviour.
In foreign currency, it has no issue. But when see in local currency, it has price difference which is not due to forex.
The exchange rate used is 7.79594
ithe 4 GR lines in foreign currency
14,006.00
9,870.00
14,194.00
3,948.00
where the total foreign amount is 42,018.00
the 4 GR lines in local currency
109,189.98
76,945.96
110,655.62
30,778.38
where the total calculated by system is 327,569.94
BUT, if you calculate yourself, it should be the below where total is 327569.81.
109189.94
76945.93
110655.57
30778.37
Both amount giving the difference of 0.12. (line item of GRC cannot set off due to difference of 0.12. GR 327,569.94 and IR 327,569.82).
Now, during IR, the foreign amount is same which is 42,018.00 and exchagne rate also the same 7.79594 but the GRC amount is credited 327569.82.
But if you see in PO history in me23n, the amount at IR line is 327569.81.
When I see the document in local currency, it throws out credit of 0.01.
My question is,
1) why during GR, the amount calculated manually and system different by 0.12?
2) why during IR, the local amount with addition of 0.01, which is 327569.82 whereas in PO history in me23n, it is showing 327569.81. Why FI document figure and PO history tab IR line different by 0.01?
Thanks

Hi Calesta,
While the currencies have decimals exceeding 4places, then system would many times dismayed while converting and displaying between the local and the foreign currencies. Pls check if you have defined decimal places for the currencies as per your requirement.
Finally the concern is in the acc doc entries either in MIGO or MIRO. If the difference you are getting is affecting your accounting due to exchange rate differences etc you can configure automatic posting by TE key KDR in OBYC
Regards
Shiva

Suppress leading spaces while displaying an amount field in a Smart form

Hi all,
In a smart form, I am using fields like KONV-kbetr and VBAP-netwr each of them currency type and 2 decimal places. I want to suppress the decimal places and also the leading spaces while displaying these fields in a smartform cause when this field is inserted in a sentence, a lot of gap is there between the field and the words of the sentence. I dont want to change the field length cause it can be that huge in some cases.
Please help.
Thanks ,

Hi, if you would place it in a sentence, it would be an option to concatenate the text and values into one string and then condense it.
concatenate <text> <value> into lv_sentence.
condense lv_sentence.
but another way is to use codes for displaying values in smartforms:
This is from a smartforms PDF i have..
Output Options for Field Contents
Use the Formatting options to adapt the value of a field before printing it. You can enter the
relevant parameters directly behind the field name. Make sure to write the short forms of the
different options in uppercase letters. Some of the options can be combined.
General Information
The formatting options are not suited for all data types of fields (for example, for character fields
you need no exponential representation). You must distinguish between numeric fields and
character fields.
Numeric Fields
If specified, the system first evaluates the length (<length>).
If no length is specified, the system displays the value in its overall length.
The trailing blank indicates a positive sign. To suppress it, use formatting option S.
Any offset <offset> specified is ignored.
Sequence of evaluation: (<length>), sign to the left(<),Japanese date (L), suppress blanks (C),
right-justified display (R), insert fillers (F).
Character Fields
By default, the system displays the value of a field in its overall length, but truncates trailing
blanks.
Sequence of evaluation: suppress blanks (C), <offset> and (<length>), right-justified display (R),
insert fillers (F).
Overview
Formatting Options for Fields
Syntax Description
&field+<offset>& Skips <offset> places of the field value (character fields only). If the
offset is greater than the length of the value, nothing is displayed.
&field(<length>)& Sets the output length to <length>.
&field(*)& If the field is defined by a Data Dictionary type, Smart Forms set the
output length to the value specified there.
&field(S)& Suppresses the sign
&field(<)& Displays the sign to the left of the number
&field(.<nat.number>)& Limits output of decimal places to <nat.number>
&field(E<nat.number>)& Displays the field value with the fixed exponent <nat.number>. The
mantissa is adapted to this exponent by shifting the decimal
character and inserting zeros.
SAP Smart Forms (BC-SRV-SCR) SAP AG
Output Options for Field Contents
72 April 2001
&field(T)& Suppresses thousand indicators when displaying fields of types
DEC, CURR, INT, and QUAN.
&field(Z)& Suppresses leading zeros of numbers
&field(I)& Suppresses display of initial values
&field(K)& Deactivates a conversion routine specified in the Data Dictionary.
&field(R)& Right-justified display. Use this option only when specifying an
output length as well.
&field(F<filler>)& Replaces left-justified blanks in the value by the fill character <filler>.
&field(L)& Converts and a date field to a local date and displays it. The date is
then formatted using edit mask JPDAT.
Since this representation uses Japanese characters, use it in the
Japanese version of the SAP System only.
&field(C)& The system takes the field value as a sequence of words separated
by blanks. Option C shifts these words to the left and leaves only
one blank inbetween as separator. Any leading blanks are
suppressed. This effect corresponds to that of the ABAP statement
CONDENSE.

FAGLB03 - *"No Authorization for Transfer Prices, Third Local Currency"*

Hi Experts,
I am getting error while process the line item avilable in the T.Code FAGLB03- New GL Display.
When I am double clicking any line item the system giving this below error.
"No Authorization for Transfer Prices, Third Local Currency"
Hope it would be same gap in the configuration level.
Experts, please advice asap.
Warm Regards,
Sivakumar Sathiyamoorthy

Hi,
Note 1238115 - FAGLB03: Authorizations not always checked
Sorry for inconviniecy caused
Regards,
jigar

While displaying Local currency(JPY)....

Similar Messages

Maybe you are looking for