While doing delivery batch is showing in two storage location

Dear All,
I have following senario in WM:
First I will create Packing order for my End product, here batch will generate.
For this Material Quality is active that is Insp type 04.
Here i will do LT10- I will transfer to Final Bin that is Finish Goods storage location say SL01.
After this i will go for QA32 and here I will cleare the quality and transfer to FG storage location SL02.
Now i will check the stock for the batch. but here i am observing the stock for the batch one is with stock indicator with 'Q' and one more stock without 'Q'
Now I want to delivery the material how i can delivery? here i am getting that material in two starage locations SL01 and SL02.
here which one i should consider for delivery.
Please guide.
Thanks in advance.

Are you talking aobut storage locations or storage bins?
First I will create Packing order for my End product, here batch will generate.
For this Material Quality is active that is Insp type 04.
I guess this posts the receipt into Q status in storage type 901 with dynamic bin of the packing order.
Here i will do LT10- I will transfer to Final Bin that is Finish Goods storage location say SL01.
So you move your goods while they are in Q-status.
After this i will go for QA32 and here I will cleare the quality and transfer to FG storage location SL02.
Now i will check the stock for the batch. but here i am observing the stock for the batch one is with stock indicator with 'Q' and one more stock without 'Q'
QA32 resets the Q-status at IM level.
If you have not yet changed the status in WM too, then you transfer just unrestricted use stock to your final bin, hence you have your batch in to different bins, one with with q status and one with unrestricted use status.
You have to execute LU04 to process the status transfer as well in WM. This will then clear the situation. Best is to o this before you move stocks.
Now I want to delivery the material how i can delivery? here i am getting that material in two starage locations SL01 and SL02.
here which one i should consider for delivery.
you can only consider unrestricted use stock in the bin where the material physically resides.

Similar Messages

Error message while doing delivery

I am getting an following message while doing delivery
Material 20000019 doesnot exist in storage location DLPT 2120
Storage location was deleted since material was not maintained correctly
No Schdule line is due for delibery upto the selected date
Please guide me with the solution.

Dear Sanjay,
First of all, I would like to suggest to check the "Organizational Level" data, with which Material was created in T. Code: MM01.
Check the "Plant", along with "Sales Org" and "Dist. Chnl" in T. Code: MM02
Also, check the "Strorage Location" in T. Code: MM02
Select the Views: Sales: General Plant data/storage location and then go to organizational elements and enter the plant and storage location, save it.
Also, on to the same screen up there, in Menu-Bar:
Enviornment --> Sock Overview
It will lead you to Screen: MMBE
Check Stock for the Material.
Best Regards,
Amit
Note: I am a bit confuse with your statement:
Storage location was deleted since material was not maintained correctly
Do you mean that, You have removed "Strorage Location - DLPT 2120" from the Material Master "20000019"?

While doing MIGO transaction system showing error: Check table169P the entr

Hi experts,
while doing MIGO transaction system showing error: Check table169P the entry BP01 does not exit.
pls do needful.
Thanks&Regards
sreenivas.p

Hi,
Please specify Whether you are doing Blocking of Invoices or what?
As the T169P is A Parameters Invoice Verification, so you can check the values for T169P table in SE16 so that you will get Clear idea regarding company code BP01 in which the stochastic block is active with Threshold value for stochastic block...
Please check....
For maintaining Entries please go to OMRG maintain Company code and Threshold value as per client requirement so that This will specifies the degree of probability that an invoice is stochastically blocked.
Regards,
Ninad Kshirsagar

Two storage location concept in EWM AFS ROD.

Hi Experts,
This post looks very old so opening a new thread.
http://forums.sdn.sap.com/thread.jspa?threadID=1563967
As mentioned I would like to know the working of AFS and ROD storage locations in EWM.
ROD -- F1 Unrestricted in putaway ,      AFS -- F2 -- Available for sale.
1. I can perform goods receipt for both the storage location using inbound delivery.
              For ROD stock will go to stock type F1
              For   AFS stock will go to stock type F2.
2. As per the information I can not perform goods issue from ROD ie I can not create a Outbound delivery to issue the goods from ROD storage location.
3. If any goods issue is needed I should transfer the goods from ROD storage location Stock type F1 to AFS storage location in EWM, may be by transfer posting.
Does these points make sense ?
Regards
Shashank
Edited by: Shashank Balooni on Aug 11, 2011 2:47 AM

Self:
In EWM we have to use two storage locations : 0001 (ready on dock ) and 0002 (available for sale )...
In configuration ewm : availibility group 001 + 0001 and availibility group 002 + 0002
                                 availibility group 001 + F1 and availibility group 002 + F2
Create delivery and confirm the warehouse task : stock moves to 001 F1 , Storage type maintained in Warehouse process type > and this will trigger receipt in 0001 at IM
Later when the goods receipt is posted in EWM from delivery the stock will move from 001 / F1 to 002/ F2 in 0002 store in IM
Hope this helps !
shashank

Transfer of stock between two storage locations within a plant in two steps

Hi,
We have a plant 6400 & we have two storage locations 6401 & 6402. Each storage location belongs to a department which are located at some distance from one another.
The material to be moved from one storage location to another using a truck.
For the above mentioned process can we have the following process
(1) In first posting the material is issue from the storage location to a transit
(2) In second posting the material from the transit is received into the storage location
I am looking for a feature that is possible between two plants, can we have a similar feature available within a plant.
Warm regards,
Umesh

Hi Umesh,
It would be a business decision i suppose. If those 5 nos. are lost / damaged in transit & needs to be scrapped, then the ownership needs to be decided first. If it lies with the sender, then reverse the 5 nos. (MB1B mvt is 314) & then proceed with your scrapping or if it lies with the receiver then receive the 5 nos & then proceed with the scrapping.
Posting in system is one aspect, but a clear business rule is the key factor. So discuss with your materials mgmt personnel to define the process flow.
Hope the above helps.
Regards,
Vivek

Stock transfer order between two storage locations in IS Retail

Hi,
I want to have a Stock transfer order between two storage locations in the plant.
I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
Tnx
Lior

Hola.
Voy a contestar tu pregunta en espanol. Debes crear al centro emisor como deudor en la transaccion WB02 y ampliar a la organizacion de compra.
Posterior, debes crear al centro receptor como acreedor en la transaccion wb02.
Cesar Moreno. Funcional MM Retail.

STO- delivery document not commiting materials from storage location.

While creating an STO PO and delivery to move a material from a storage location in Plant 0003 (plant 0003 consists of 30 storage locations and 3 Shipping Points (1 for each of the Depots)), we are facing 0 stock issue.
We can change the Shipping Point in the STO PO to the Depot the material is coming from but no place to identify the Storage Location from which we are pulling.
The STO PO commits the material and provides a commit date.
We are using VL10B to create the Delivery > the Delivery fails and the log says "440000 0010 Only 0 EA of material 772-8760-876 available". There is material in 3 different Storage Locations in that Plant.
Does a delivery document consider shipping point only and not the storage location (sloc) inventory?
Do we need sloc-shipping point tie-up one to one?
We have inventory in both Storage Locations for MRP and for NO MRP.
Any advice, not sure if we are missing anything in config!
Thnx!
Points will be rewarded.

Check the following in OPJJ
The checking rule(for delivery it is B in std SAP) and avaiability check(from material master) combination
in the storage loc check sub screen
NO storage loc inspection check box is activated or not?
If it is not activated then system will check as per storage loc specified in delicvery, if activated, then system will check and give commitent at plant level
One more check is
In table TVKOL, is the storage loc is determined through shipping point/plant/stog condition combination?
IS so this storage loc is taken for checking

Inspection lot for Mvt type 311 between two storage location only

Hello all,
I want to create an inspection lot only whenever my material transfer between two particulars storage locations. e.g if i have multiple storage locations, then i need an inspection lot to be created whenever my material transferred from say X S.Loc to Y S.loc only. For other transfers i don't need to create an inspection lot even from Y to X.
For more clarity, suppose i have ten storage locations. i have also created one storage location for my Lab. So I want an inspection lot to be created only when my material transfer to my Lab storage location from any other storage location, not when i transfer from my LAB to any other S.Loc or between two S.Loc other than LAB.
I have activated inspection type 08 but it does not have a restricition on S.Loc.
So please suggest some solution for the same.

Dear Amit
In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
So whenever you want inspection lot to be created use Z11.
You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
Regards
Gajesh

How to get delivery address in STO for the storage location

Hi All,
We have to create STO from the reservation using MRP run. While system is creating the STO we need to populate the storage location address as delivery address (not the plant address ). How we can do that? what are teh settings required for this setup? please hlep in that.
Regrads,
Khan

Hello...
You can select the storage location in the line item itself which is adjecent to Plant for the line item.
Regards
Suresh

STO - Delivery to be created from specific storage location

Hi,
My requirement is after STO creation stock would be consider from a specific Storage Location and if stock is not available in that specified storage location system should throw an error at the time of delivery creation(VL10B) or delivery would be created for the available stock in the specified storage location.
Please advice what configuration to be done to achieve this functionality.
Thanks,
Victor

Dear Venkatesh,
Thanks for your prompt reply,
But I could not find the Storage Location field in Purchase Order Header, checked in field selection layout 'UBF' and in table 'EKKO', wherein a Storage location field is available in Item Overview next to the receiving Plant.
Plz help me out,
regards,
urendra

While doing RMA, Reference field shows Return Orders as well....

Hi,
While testing RMA Functionality, I came across few issues (questions). I need help from all OM Gurus.
1) When entering RMA Order, once enter the order and go to line, on the reference field, I am trying to link it to Original sales order. Once I select the Sales Order as Reference, I am able to see all the orders placed by that customer. SURPRISINGLY, it also shows the RMA Type of orders as well. Does it an intended functionality?
2) If the Original sales order line is having 10 qty, when I enter First RMA by giving reference to the original one, it by default populates item number and qty. Now, I override the qty column with lesser qty lets say 5 and process the line. Now when I create another RMA by referencing the RMA order to the same line, it again populates the qty field to 10 only. Ideally, it should populate 5 only as 5 we have already received. Though, we are getting an error saying that it should not be greater than original sales order. But how associate will come to know how many qtys are pending to return?
3) While entering an original sales order, I have overridden the price from 100 to 80. Now, when I am creating an RMA, it is showing the price as 100 only. I guess there is some functionality called Calculate Price Flag with three options but I am not able to understand what it is actually doing.
Any help will be highly appreciated.

1) The Intended Functionality is when you select "Reference Column" for any RMA Line, it will ask you for Reference Type (Lets say you are selecting Sales Order) then it will ask you for Order Number and Line Number. So, this is how Linking the RMA Line with any Sales Order goes.
2) You have to goto the Original Sales Order -> Select Line -> From Actions Button, select Additional Line Information -> Return Tab. Here, you will get all the RMA or Returns information which are link to this Sales Order Line.
3) Regarding Calculate Price Flag, the Pricing tab enables you to specify whether the new order or order line is copied at the original pricing or is repriced. To reprice, you can specify the pricing date. If you choose to reprice the order or order line, manual discounts and charges are removed and automatic discounts and charges are recalculated. If you choose to retain original pricing, all discounts and charges are retained and the Calculate Price Flag is set to Freeze Price for order lines and Partial Price for return lines. Additionally, you can choose to set the Calculate Price Flag to Partial Price by selecting the corresponding radial button on the Pricing Options Tab.
When the destination order type while copying an order is RMA, Order Management will set the Calculate Price Flag to P for the copied
order lines even if you specify At Original Price within the Pricing Options tab copy window.
Hope it may help you.
Regards,
Khan.

Error while doing delivery. Please advice

Hi friends,
I have created multiple line items in a sales order, with the same header data and material. The schedule line date is also same.
In that, i have selected two line items for delivery. When i check the error log it is showing an error message " Delivery split due to header data ZUKRL"
Checked the copy controls header: Order requirements is 602, Combination requirmt is 051, header data is 602
Item: Order requirements is 601,Item data is 101
Requires your advice, so that i can have the above said scenario.
Thanks in Advance
Prasad

the order combination check box for these both line items is not ticked
This may not be the reason since in your first post you had indicated that from one sale order and for two line items delivery had been created and they were splitting.
So as I said above, compare both the line items in the sale order for the following:-
a) Ship to Party
b) Confirmed date
c) Inco terms
d) Transportation Group
e) Shipping Point
f) Requirement Type
thanks
G. Lakshmipathi

Error while doing Delivery split.

Hello Gurus,
My client's requirement is as follows:
I have a sales order containg two line items of 900EA each. I have to split this into 3 deliveries(300 EA of each item). I am trying to do it by VLSP. I have entered the delivery No. and split profile and two items appear. When i put quantity 300 and select one item and simulate, an error comes RUNTIME error.
Pls guide me if iam missing out on any step?
I want three DOs having 2 Items each with 300EA(QTY).
Regards,

Hi,
You can directly use VL01n for Delivery creation...
Enter Shipping point and Sales Order Number..
In the Delivery Screen you will get 2 line items...
Here you can change the Delivery Quantity as per your requirement (300EA out of 900EA in your case..)
Next time do the same thing and in this case you will get remaining Quantity of 600EA..
Again change the Delivery Quantity to 300EA and so on...
Hopr it will help..
Thanks & Regards,
HP

Error while doing delivery of STO

Hi All,
i am creating delivery of STO (Intra company) using T-code Vl10B.
I am getting given below Error messages.
1. Shipping is not allowed for SO "ABCD" & DC "XY" from Plant "ABCD".
2. 00010 delievry from Plant "ABCD" for Material "ABC" is not possiable.
Please suggest where i have missed the configration.
Thanks
PKY

Hi,
You might need to check if the plant is assigned to the respective sales order, please check if the plant is assigned to the combination of Sales Org and Dist chanl in the IMG( Enterprise structure -> assignment -> sales and distribution -> assign Sales organization u2013 distribution channel u2013 Plant.
If the plant does not exist, please assign and check.
Thanks,
Srini,

ITEM CATEGORY PROBLEM WHILE DOING DELIVERY IN VL10B

Hi gurus,
I was trying to do replenishment delievery w.r.t a stock transfer through sd route. In vl10b when i processed background delivery, it's generating n error log , which reads
No Item category exists (Table T184 ZNL 0001 V )
Where as in item category determination it was already there for Delivery item category
ZNL NORM V ZNLN
ZNL NORM CHSP ZNLN
pLEASE GUIDE

Hi
This is the assignment you have made
ZNL NORM V ZNLN
ZNL NORM CHSP ZNLN
I believe, you have entered the Item Category in the column immediately next to Usage colum. Leave that field blank and place the item category in the colum second to Usage column and try.
Thanks,
Ravi

While doing delivery batch is showing in two storage location

Similar Messages

Maybe you are looking for