While doing MIRO Tcode system is very slow

hi experts,
       i am facing big problem, while doing MIRO transaction first screen it is fast after entering the P.O number then system will slow down for loading P.O line items, even scrolling or shifting to one tab strip to another tab strip also it's taking lot of time.
                   2 or 3 line items it was fast. if line items is more than 10 the system will goes slow. so plz anybody tell me the reason. And what i have to do.
   what could be the reason for problem .(There is no abap code involved) PLZ ...
                                   i am waiting for reply.
                                                             Murali Papana.

Hi Murali,
   Try to create index for the tables: BKPF, MSEG AND RBKP.
The fields involved for MSEG: lfbja, lfbnr and lfpos.
                               BSIP: bldat and xblnr.
                               RBKP: lifnr, ivtyp, repart and rbstat.
Try these and pls let me know the status if improved.
Regards,
Aditya.

Similar Messages

After update my iPhone 4 iOS to 4.0.1 my bettery gone so bad. Every 1% goes in every minute while browsing. Also system gone proper slow and 3G conectivity gone very poor. I really want to go back to ios 4.3.4 until these issue is resolved. Please help.

After update my iPhone 4 iOS to 5.0.1 the. Bettery gone so bad. Every 1% goes every minute while browsing. Also system is very slow and 3G. Connectivity gone very poor. I want to go back to ios 4.3.4 until these problem are resolved. Please help.

Just look around the forum posts. Your issue is the number one problem reported by users. There are many suggestions found, some work for some users, others do not.
Some users have reported no battery problems after the upgrade. Others have improved performance after upgrading to 5.0.1 from 5.0. YMMV.
Many of the posts offer suggestions about changing various settings - there are many that affect the battery life.
Once you upgrade the iOS on a device, you cannot go back to a previous version.

Region to pick based on branch vendor while doing MIRO

Dear All,
following is the scenario :
PO is created on branch vendor (with a HO vendor mentioned in master). While doing MIRO, the system automatically replaces the branch vendor with the Head office vendor (as mentioned in master). The region taken for tax purpose is the region of the HO vendor.
Now the requirement is that, while doing the MIRO, the system should pick up the region of the branch vendor and not HO vendor. Will have to create/ write an exit or use substitution.
Can somebody eleborate how should the logic be mapped for exit in connection with substitution?
Thanks,
Tapan

Dear Alok,
Thanks for the reply. We actually already started to work on it. But, as we want to replace HO vendor with branch vendor during MIRO as already mentioned, we are still awaiting what logic should be mapped in substitution as well as exit for that.
It would be great help if you can throw some light on the same.
Thanks
Tapan

While creating Billing, system is very slow..performance issue

Hi,
While creating Billing, system is very slow. How can I debugg and provide the analysis where is the exact problem.
This is showing performance issue.
Waiting for kind response.
Best Regards,
Padhy
Moderator Message : Duplicate post locked.
Edited by: Vinod Kumar on May 12, 2011 10:59 AM

hi,
Chk the links
http://help.sap.com/saphelp_nw04/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
Re: How to create Secondary Index?
How may secondary indices I can create on the ODS?
Deletion of ODS index
Ramesh

While doing MIRO with unplaned cost system is picking accurel G/L account

Dear All,
While doing MIRO with unplaned delivery cost system is picking accural G/L account rather than cost element from PO.
Thanks
KMR

Hi,
It depeneds how the Unplanned Delivery Cost has been configured for the comany code.
SPRO>Material Management>LIV>Incoming Invoice>Configure Unplanned Delivery Cost.
Against Comapny Code put blank if : Unplanned delivery costs are distributed among the invoice items ( here the Materil account or the Account in the PO will be used. )
Put 2 if : Unplanned delivery costs are posted to a separate general ledger account ( here the posting key UPF will be used to determine the g/l account ).
Thanks and Regards

Account dertermination error while doing MIRO for third party PO

Hello,
This is regarding error message while doing MIRO (IR)
There is already a PO in the system with item category S ( Third Party ) &
Acc assignment object u2013 C (Sales order).
For this PO , I could find 10 invoices already posted in the system.
Between when these invoices were posted , there were some changes done to the PO.
But even after those changes , many invoices were posted in the system,
But now , when I try to post the invoice , I am getting the below error message.
the error message is ** Account determination for entry SKPL WRX 0002 _ 1020 not possible** while posting.
Message no. M8147
Diagnosis
The system did not find an account for this transaction. This means that the account determination for key SKPL WRX 0002 _ 1020 is not maintained in MM Customizing (Valuation). The key is made up of:
u2022 Chart of account
u2022 Transaction key (= Posting transaction)
u2022 Valuation grouping code
u2022 Account grouping code
u2022 Valuation class
System Response
The system cannot update a G/L account for this transaction. You cannot post the transaction.
Procedure
Contact your system administrator.
If you have the authorization, check the Account determination in Customizing for Valuation.
Proceed
Note
The relevant posting transaction can be found in Table T030A.
I have checked the entry in OMWD, where valuation grouping code is maintained against the valuation area & company code.
PLEASE SUGGEST ME SOME SOLUTION.
Thanks,
Vinoth

Hi Raman,
Yes, still i am getting error.
before when the invoice is posted , there is no error.
there are some 10 invoices posted already , but there are some changes done in the PO , after that they could post two invoices but for the third invoice , i am getting this error.
when the invoive is posted without error , these are the account movements that are hit
Here
441510 is a vendor account
61799410 is a WBS element G/L account
27411000 is a G/L for tax.
What could have pulled out this WRX error (Account determination for entry SKPL WRX 0002 _1020 not possible ) for me????
can u suggest me some solutions.
Thanks,
Vinoth

Error while doing miro of network purchase order ( no funds center entered/

Hi,
we are facing one problem while doing miro of network service purchase order. System is giving message 'No funds center entered/derived in item 00030'.
We have activated funds management in Jul'10. The said network service PO belong to previous year. Also we have changed
commitment item of GL account related to concerned service order in Jul'10 & posted GRN one in apr'10 & one aug'10.
System is not allowing to cancel the service entry sheet.
Can anybody help on this.
regards
abhishek

we had activated the trace facility for FMDEIRIVE & found that all FC/Commitment item derived correctly. But while posting the document it is throwing an error.
Regards
Abhishek

While doing MIRO, i am getting error:-Tax code V0 country IN does not exist

hi frds,
while doing miro. i am getting this error:-
pls correct me
Tax code V0 country IN does not exist in procedure TAXINN
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
regards,
william

hi
go to ftxp choose tax code v0
here in first input field give 00
then select that field and click on gl acct tab
here mention a gl or go to ob40 and mention gl for the acct key of that field
try finding
Tax code country IN does not exist in procedure TAXINN
on SDN u will get many threads
Tax code XX country IN does not exist in procedure TAXINN (MIRO Error)
conclusion is u must get acct for at least one condition in the tax code
regards
kunal

Purchase order Budget not reversed while doing MIRO

Hi,
Here, we are using funds management for budget analysis with update profile 350 and other setting tick on Goods Receipt only. while doing PR/PO it is coming to commitment budget. Goods Receipt no FM document created.
Strange behavior of system is , while doing MIRO system is not reversing PO budget and updated double consumed in commitment item.
Thanks and Regards
Kaushal shah

Hi,
If you have only GR ticked in OFUP, why would you expect MIRO to have an impact on PO's commitment? As for the fact, that GR document does not create FM posting, you have to check FM assignment of GR and make sure that commitment items are duly defined.
Regards,
Eli

Delivery note of 105 while doing MIRO

Hello,
We follow 103 & 105 movement type while doing MIGO (103 for initial gate entry and 105 for final store entry).
But when we go for MIRO, as a reference document (Delivery Note), it shows document generated at the time of 103 entry.
And while doing MIRO with delivery note of Movement type 105, system does not show any line items to be invoiced.
Can anyone let me know, why system is not picking the delivery note for 105 and picking the delivery note for 103.
Thanks
Prabhjot Singh

Hi,
why do you want reference materials from different po during miro then?
Silas
Edited by: Silas Ngcobo on Mar 31, 2011 12:18 PM

Compaq sr1320nx /win xp after keystroke/command, the system is very slow 10-15 secs. before response

after keystroke/command, the system is very slow 10-15 secs. before response

What I've done is that I reinstalled 10.8.1 and each time, I ran disk utilitiy. It has helped but fter a while, especially when waking up from sleep, EVERY app can take a lot of time to come up, including those already activated. Every click would take at least 5secs to respond... and then the spinning ball comes up.
It's only after the same app was used, then it would be smooth. For example, I run my cursor down to the bottom of the screen where my dock is hidden. It would take a few times of running down before the dock shows up. From that point on, it would would work nicely unless I click on any of those apps in the dock. Then, it would take another 5secs or more before something shows on the screen such as clicking on Mail. It takes more than 5secs before mail pops up. Then, when I click on any mailbox, it would take another 5secs or the spinning ball comes up. From that point on, clicking on Mail is smooth and cicking on the same mailbox is smooth unless I click on a different mailbox or go to preferences, for example.
So, I keep running disk utility almost everyday and now, it works 99% of the time. If it slows again, I run the disk utility. I guess that's the way to go until they come up with a proper fix.
All this housekeeping work reminds me of Windows and the endless defragging and optimising. That was one of the few reasons why I switched to Apple and now...
Dear Mr Steve Jobs, please send some enlightenment to your Apple teams!

Facing problem while doing MIRO

Hi gurus,
I facing problem while doing MIRO, system showing the message "Customization for "company code" J_1iindcus missing in the table"
pls help

Hi,
Please do customization for India Localisation-Phase-II.
In transaction J1IT, maintain company code settings.
J1IT->Global Settings->Company Settings
Reward if useful.

ALSA: snd-via82xx - No sound but system gets very slow

Hello!
I'm using the Onboard sound chip on my Fujitsu-Siemens D1607 mainboard. It' A Sigmatel STAC9758/59 Chip and runs with snd_via82xx module (worked with SuSE 9.1 so far, at least stereo-out but no LineIn). Now when i load the module as discribed in the ALSA howto an unmute Master and PCM i still get no sound, but my system gets very slow (applications start ten times slower, loading websites also takes much more time). But snd_via82xx seems to load without errors.
ArchLinux is uptodate and i'm using a custom Kernel 2.6.7 because i need some special settings for my AVM Fritz!Card DSL.
Does anybody have any hint?
CU ActionNews

Hmm ... is tried it at root only . Strange is that even CD doesn't work. No sound. Unfortunally this config works perfectly under WindowsXP so speakers should work so far. Realy strange .... this is was amixer says:
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'Master Mono',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Headphone +3dB Boost',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Headphone Amp',0
Capabilities:
Mono:
Simple mixer control '3D Control - Switch',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control '3D Control Sigmatel - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 0 [0%]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'PCM Out Path & Mute',0
Capabilities:
Mono:
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [off]
Simple mixer control 'Center/LFE Jack',0
Capabilities:
Mono:
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on] Capture [on]
Front Right: Playback 31 [100%] [on] Capture [on]
Simple mixer control 'Line Input Source',0
Capabilities:
Mono:
Simple mixer control 'LineIn Jack',0
Capabilities:
Mono:
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on] Capture [off]
Front Right: Playback 31 [100%] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Mic Input Source',0
Capabilities:
Mono:
Simple mixer control 'Mic Select',0
Capabilities:
Mono:
Simple mixer control 'Mic1 Jack',0
Capabilities:
Mono:
Simple mixer control 'Video',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Output',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Playback AC97-SPSA',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 3 [100%]
Simple mixer control 'PC Speaker',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 0 [0%] [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Mono Output Select',0
Capabilities:
Mono:
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 15 [100%] [on]
Front Right: Capture 15 [100%] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Exchange Center/LFE',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Front Jack',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',1
Capabilities:
Mono:
Simple mixer control 'Rear Jack',0
Capabilities:
Mono:
Simple mixer control 'Sigmatel 4-Speaker Stereo',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Sigmatel Surround Phase Inversion Playback ',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'VIA DXS',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 30 [97%]
Front Right: Playback 30 [97%]
Simple mixer control 'VIA DXS',1
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control 'VIA DXS',2
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control 'VIA DXS',3
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Should be ok, but perhaps you guys find something wrong.
in dmesg and /var/log/messages i do not find anything uncommon. Most of the messages are status messages from pppd .
CU ActionNews

Error while doing MIRO-Perform Plan price

Hi ,
We are on ECC 6 and we are getting error as "Perform Plan price for the material" while doing MIRO.
*Information:*
Price is different in Purchase requisition and PO&GR.MM03 is having proce control as "S" and the M Master is having both Moving price and standard price.
I tried changing the price through MR21 but still didn't worked.
Pl let me know if you need more info..
Thanks a lot in advance for early reply.
Govind

Hi,
Thanks for the reply. Since we are not using GR feature and we have not reversed the GR anytime.
Regards,
Lovkesh

After upgrading to OS X Mavericks syslogd needs lot of memory and cpu, system is very slow

After upgrading to OS X Mavericks the system is very slow. securityd and syslogd are using 50% of cpu and memory is also used by syslogd and kerneltask (8 GB out of 12). After rebooting the system it runs very well, a view days later (without reboot, only hibernating) the situation is the same.
Looks like a problem in OS X. Any solutions?

I haven't worked out the LDAP messages but I noticed at other times I was seeing lots of album art messages from BlackBerry desktop. I'd already uninstalled the app but it still had processes running. I followed this link to remove completely; http://apple.stackexchange.com/questions/57023/how-to-uninstall-completely-black berry-device-manager
CPU levels have been noticeably lower ever since.

While doing MIRO Tcode system is very slow

Similar Messages

Maybe you are looking for