While Doing Production Order Settlement "Complete Allocation structure" :

Dear Experts
I am Getting This Problem ,
please give me A suitable Solution.
I am created Another Allocation Structure And Assigned to Settllement Profile . But it is not trigering. Not Capturing That allocation
Complete allocation structure Z1
Message no. KD503
Diagnosis
During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
Cost element 40512006 cannot be assigned to a settlement cost assignment in allocation structure Z1, and therefore it cannot be assigned to a settlement cost element.
Procedure
Possible solutions are as follows:
u2022 If the posting under cost element 40512006 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
Edited by: rajamallu on Jul 2, 2010 10:41 AM

Hi,
within allocation structure customizing you create assignments for allocation structure Z1.
Each assignment has a source (cost element, cost element range, cost element group).
The cost element 40512006 is not included in the source definition of allocation structure Z1 but there are values to be settled available on your sender.
Thus they cannot be settled and thats why the message occurs. So maintain alloc. structure Z1 completely.
Best regards, Christian

Similar Messages

Error while doing production order settlement

Hi frds,
When I am doing the production order settlement, I am getting the following error
" There are no accrued amounts; settlement is not possible".
The status of the order is TECO CNF DLV PRC BASC BCRQ GMPS MANC.
Rajnish

Rajnish,
Please check if there is cost balance for the order, to me it looks like the order is already settled. In the order display mode (CO03) menu bar Goto->Costs->Balance.
If balance exists then the problem may be related to the settlement period used in the Intial screen of transaction KO88. Please check the cost incured period and use the same period as settlement period.
Regards,
Prasobh

Error while doing investment order settlement

Dear all,
My client has not settled certain line items in the
previous year for some Investment orders. Now when he
is carrying out settlement (KO88), for the current
period, he is getting error message " AW 624"(first
settle items from the previous year in the previous
year). How can he settle previous years item in the
current year since FI & CO periods are all closed for
prev. year.
The settlement rule is AUC in this case.
Thanks in adv.
Vijaya

Hi
As per note 82514:
If you simply want to settle the unsettled values from the previous year
in the current year, proceed as described in Notes 425601 and 819197. If
settlement for the previous year is no longer possible, due to concluded
fiscal years in FI and CO, or the reporting problems described above
have to be avoided due to settlement in the previous year, settlement in
the current fiscal year is then particularly necessary.
As far as I know, if note 425601 is fully implemented, AW624 should
become editable in OBA5. Could you please check if the coding has been
correctly applied? Especially below steps need to be done manually:
As a prerequisite for Transaction OBA5, you must first of all implement
the program corrections of note 425601 and insert the following
table entries :
o As of Release 4.6: Use Transaction SM31 to include application
       area 'AW' into table V_T100SA.
o Start Transaction SM31 to include the following entry in table
       T100S:
       'Application area    MsgNo    Allowed      Standard   Switch off'
        AW                  624      EWI          E           'X'
Regards
Javier Reviriego

Message no. KD503 - Complete allocation structure K1 for Internal Order

Hi,
During Internal order settlement through KO88 I am getting this error as :
Message no. KD503 - Complete allocation structure K1
Diagnosis :
During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters). Cost element 430500 cannot be assigned to a settlement cost assignment in allocation structure K1, and therefore it cannot be assigned to a settlement cost element.
Procedure :
    Possible solutions are as follows:
    o   If the posting under cost element 430500 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
    o   If the posting was made correctly, you can do the following:
a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose
    "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure. If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
-   You can update allocation structure K1
The same configuration in Development Server there is no error but problem occurs in Quality server. Here the process is Internal Order creation - Creation of Reservation through MB21- Goods Issue against reservation through MB1A and finally settlement through KO88. During settlement this error occur. In configuration setting of allocation structure under Internal Order I have mentioned only revenue settlement (as per business) against assignments. Under source mentioned cost element group and under settlement cost elment Receiver Cat is "CTR" and tick "By Cost Element".
During MB1A i.e, goods issue accounting entry is generated as
81(Dr). 430500 Constimptuion Saprae and Stores
99(Cr). 310411 Inventory Machinery and Spare.
During settlement this debit figure should credit. But not allowiing to credit. Even in configuration under settlement cost element if I remove the tick of "By cost element" and mention secondary gl account whose cost element category is 21, still showing the same error in QA server. What may be the probabale solution ? Even if i remove allocation structure K1 from settlement profile 20 still same error exist. How this link gets during settlment inspite of removing allocation structure from settlement profile...
NB.. COPA is not implemented in our company. So PA structure should not arrise here....
Thanks & regards,
Samrat
Edited by: Samrat Roy on Aug 30, 2010 7:28 PM

Hi Samrat,
The issue is very simple.. Cost element 430500 is posted in your IO...
While settling you have 2 options... Either you can credit the original GL account 430500.. This happens when you tick "By Cost element".. This you have done already...
2nd option is not to tick "By Cost element" and assign a secondary cost ele category 21...
But for any of these options to work, you have to include GL 430500 in the "source"... The above 2 options apply only to those GL accounts which are mentioned in the "Source".... for rest of the GL accounts, system gives this error
Include 430500 in your "source" cost ele group.. Error will be resolved
Regards
Ajay M

After production order settlement, where does the cost go?

Dear Experts,
I understand after we did the "order settlement" for production order, the cost will be settled to material manufactured from the said production order. Say, the total cost is $10,000 to produce 1000 units of finished goods (FG), then the cost settled to each individual FG at $10 each, am I right? Where can I see the settled cost in the material master?..
I checked in the cost center report, S_ALR_87013611, I can see the cost Credited from "production" cost center with a breakdown in settlement cost element such as machine hour, setup and personnel hour. I understand the other side of Debit was to the production order, and only after order settlement, I'm not sure which cost center will be Debited.
That would be the CO side, how about the FI, would there be any cost posted to the GL side after production order settlement to the material?
Please advise..
regards,
Abraham

Hi Abraham,
It's not the button i mentioned. I was just trying to take u to the accounting document from the settlement screen. well just drill down the settlement screen and u'll get it. No big deal.
But more important is the concept. I'll share my understanding here. (cost by production order)
Any value that flow into controlling module should have a cost object. Here production order is the cost object.
First u create a production order (cost object) for say 1 unit of X with a std price of Rs. 10
Std price comes frm material master as a result of std cost estimate
U start production - Raw materials are consumed - 2 qty x Rs.3.
Entry RM Consumption Dr Rs. 6    Inventory Cr Rs.6 (Prod order is debited with Rs.6)
Activity (Let's say machine hours - 3 Hrs x Rs.2) According to the routing it was 2 hrs but actual production took 3 hrs.
Entry - None - But production order is debited with Rs. 6.
When production is complete for 1 qty of X, entry flows
Finished Goods Dr Rs.10    Change in Stock Cr. Rs.10 (Production order is credited with Rs.100
Abraham, now visualise both sides of the production order. It will have debit of Rs.12 and credit of Rs.10.
Now accountant sees the production order and confirms the values are ok and puts the status of TECO to the order. which means the order is technically complete.
Now when u run the order settlement, this production order is picked up by the system (due to it's status). System sees difference between debit and credit of Rs 2.
So it cedits the production order with Rs. 2. Now both debit and credit of production order is equal (Rs.12)
Entry Price diff A/c Rs,2     Change is stock A/c Rs.2
Now this rs. 2 is settled to COPA. It does not flow to material.
Reason: in a std costing system materials are valued at standard cost and
Hope this helps. Do revert in case of doubts.
Best Regards
Vimal

WBS settlement issue:Complete allocation structure A1.Message no. KD503

hi all
I created an WBS 600041 and through FB60 posted the JV by assigning the WBS 600041.
Then I saw in CJI3 the posting is done and it is showing there and I created a settlement rule and gave the 100 % cost settlement on AUC and saved it. Now when I go to CJ88 and do the actual settlement and gave all the parameters for full settlement and execute it is giving the following error
Complete allocation structure A1.Message no. KD503
Is this problem due to cost elements? How do I go about it.please suggest.
kind regards
Aman

HI,
Check your allocation structure OKO6 transaction. see whether your allocation structure is having the expense cost element you posted listed in it
OKO6- select your allocation structure-Assignments-source
Here the GL account should be listed
Regards,
Radha

We are getting the following error "Complete allocation structure GA"

Hi,
Please help on the below issue:-
We are carrying settlement of order (Period end activities ) for CO88 . We are getting the following error complete allocation structure GA.
Please guide us.
Regards
Srinivas

Hi,
Go to Allocation structure and maintain the Source and Settlement cost element for various cost groups in the structure.
And maintain this Allocation Structure in the settlement profile for your Production/Process orders.
Regards
Balaji

Complete Allocation Structure A1

Hi everyone,
I have a problem concerning settlement of orders. Running transaction va88 gives me an error message stating that I should complete allocation structure a1. However, this is not the allocation structure I want to use. The message says that I can assign a different allocaton structure to the sender by chosing Settlement Rule --> Goto --> Settlement Parameters in the master data of the sender.
Now my question is where to find the master data of the sender!? Thanks for your help!
Regards,
Martin

Hi,
I have solved this issue now. Changed the allocation structure. Now I still have one problem concerning an account which is not maintained in the strucutre. However, to assign this cost element to the right part of the structure is something my controlling people have to figure out.
Thanks anyway for all you help.
Regards,
martin

Complete Allocation Structure A1 in K088

Every month end, we settle IO unused supplies to inventory accounts (using KO88) but last July 2011 until today, system prompts this error: "Complete Allocation Structure A1"? Can anyone please help me resolve the error? Upon checking the settlement allocation structure, the master data and parameters seems all accurate. Please help resolve this issue. Thank you all in advance.

hi Gracey
your error msg. must be showing some cost element missing in the allocation structure.
Kindly maintain the same in A1...
Check the link below
Message no. KD503 - Complete allocation structure K1 for Internal Order
Regards,
Divraj

Production order settlement info

Hi,
In production order settlement category is MAT.Some times it is CTR .But costing varient is PPP2.In settlement configuration i check that Allocation structure is A1 ,PA transfer sture is A1 butdefault object trype is blank . So how system take it MAT some times CTR sometimes and wt is the impact and wt is the meaning of this thing when production settlement i is happened ?
Thanks & Regards,
Debashis

HI,
You can check order type in the Production or Maintenance order as Type.
Check the Order Type in T.code KOT2 and view details for your order type in which you can see the settlement profile. The settlement profile(T.Code OKO7) will have the Default object MAT or CTR etc.
Costing variant doesn't have any relevance.
Generally all maintainence order will be settled to cost Center.
And Production Order will be settled to Material.
At the settlement all the costs incurred for the production order will be settled (Moved) to respective Finished product if it is MAT and for Cost center if it is CTR.
The accounting entries for production order will be
Price Difference F.G A/c DR
To Change in Stock A/c Cr
or Vice versa.
Regards,
Raj

Production order Settlement to COPA

Hi,
How production order settlement will flow to COPA? Kindly help me by providing the Process flow for this.
I have ticked on settle to settlemtn COPA in settlement profile, and also assigned Pa transfer structure to profile, then system give below error
Enter a PA transfer structure
Message no. KD044
Diagnosis
A PA transfer structure is required for settlement to profitability
analysis.
If any body has any idea then pleas inform me.
Harry

Hi,
Please ensure that following:
1. Create the Settlement Profile. Make sure the settings are correct like valid receivers Segment should be made mandatory.
2. Make sure that the allocation sturcure is created correctly with all the cost elements and value fields
3. Please assign this allocation structure to Settlement Profile
4. in KOT2 assign the settlement profile to Order type
Once this is done, you are through with the settings and you will be able to do the settlement
Best Regards
Surya

Complete allocation structure Z4 Message no. KD503

Complete allocation structure Z4
Message no. KD503
Diagnosis
During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
Cost element 90001000 cannot be assigned to a settlement cost assignment in allocation structure Z4, and therefore it cannot be assigned to a settlement cost element.
Procedure
Possible solutions are as follows:
If the posting under cost element 90001000 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
If the posting was made correctly, you can do the following:
a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure.
If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
You can update allocation structure Z4
Please help resolve error below.
What do I need to reverse?
Is there a different way to enter actual cost for this?
What do you think is missing in my allocation structure?

Hi paul
This error message you are getting KD503
This message comes up at the time of settlement of the order when you are transferring the cost from on cost object to the other. Here you are giving the final cost settlement on the asset so the final asset is where all the cost is going to get settle for the cost which you have taken in the internal order. you have to define a roadmap for the cost elements which is carrying the cost from the IO to the final asset.
The resolution Is do the following: go to KO88 and explore the juke box where you have booked all the jv take note of all those cost elements now come to KSES and here under Z4 allocation structure give CO area and go to source tab and give the range of cost elements that you have used in ko88 and save it
This will resolve your issue.
Kind regards
Arman
SAP FICO

Error while creating Production order without BOM

Hi Guys,
While creating production order without a BOM i am getting the following error in the error log.
Error: BOM for material xxxxxx does not contain any valid items
Message no. CO636
Kindly help.
Regards,
Sid

Dear customer,
could you check in the master data screen of the order if one BOM has been selected?
please coudl you check your customizing the following transactions:
OPJM
OPJI
what do you have in 'BOM slection field' MRP4 view of the header material?
Please check if with this info you can find the missing data to explode the BOM
regards
Maria

Production order settlement in case of non valuated material

Hello guys,
Our client wants some of the materials have to be non valuated. These materials are raw materials and SFG also. We can assign UNBW material types to those materials.
I have created one material for test purpose. It doesn't contain the accounting view so as no valuation class. BOM of it , doesn't contain any component as client doesn't want to show any consumption on production order.While creating the order for that material system asks for the settlement rule. I skip that step and create the order. I do GR for the same.
My question is, is production order settlement essential for these orders? What if we don't settle the order. No activity type has been assign to the work center.
Kindly give ur valuable inputs.

Hi,
No need to create material as UNBW type.
Normal ROH, HALB, FERT material type we can achieve this.
In the BOM of FG or SFG goto item detail screen there is a tick mark in costing.
Remove the tick by OS23 - BOM status.
Now you can do your production as regular. But cost will not get update.You can do regular settlement also.
Regards,
Dharma

Prt availability.while creating production order

while creating production order. system checking PRT availabilty
if PRT is not there system throws warning msg
PRT: Item: 0010 Material TESTPRT1 plant BP01 is not available.
Message no. CF301
Diagnosis
You are attempting to use a PRT. However, the current status of this PRT does not permit you to use it.
how can change into error msg.........
thx in advance

Hello,
I've checked the WUL of the message CF301 and found:
CALL FUNCTION 'CO_FU_FHM_AVAILABILITY_CHECK'
       EXPORTING
            index_imp             = affhd_sav-indbt
            tco11_imp             = tco11_tmp
       IMPORTING
            fhm_not_available_exp = fhm_not_available_tmp.
FHM verfügbar
IF NOT fhm_not_available_tmp IS INITIAL.
    CASE affhd_sav-fhmar.
      WHEN material.
        MESSAGE i301 WITH affhd_sav-psnfh
                          affhd_sav-matnr
                          affhd_sav-fhwrk.
      WHEN sonstige.
        MESSAGE i302 WITH affhd_sav-psnfh
                          affhd_sav-sfhnr.
      WHEN dokument.
        MESSAGE i303 WITH affhd_sav-psnfh
                          affhd_sav-fhmnr.
      WHEN equipment.
        MESSAGE i307 WITH affhd_sav-psnfh
                          affhd_sav-fhmnr.
      WHEN OTHERS.
        MESSAGE a886
                WITH sy-repid
                     hlp-fname.
    ENDCASE.
I'm afraid the attribute is hardcoded to be warning.
BR,
Tiemin

While Doing Production Order Settlement "Complete Allocation structure" :

Similar Messages

Maybe you are looking for