While doing union operation, i am getting the following eror.

While doing union operation, i am getting the following eror.
Solution for the following error
"Numbers of columns and their data types must be consistent across all criteria and Result Columns"

Hi...phani..thanks for the response..
Report 1: TopN values... working fine
Report2: >TopN values working fine.
when i union the 2 the result is: all records, and i got it.
ReQ: i have to add the remaining Records of >N at the end of the report, represents Others: xxxx
My ReQ:
Col1 Col2 Col3 # of Srs %Of Srs
ABC Complaint Operation 200 40%
CDF ACD Part Availability 100 20%
Others 300 40%
suppose for first column in result tab,
Formula tab: case when saw_4>10 then 'Others' else saw_0 end.
when i put the above condition in Result columns i am getting the error.
Error: Numbers of columns and their data types must be consistent across all criteria and Result Columns

Similar Messages

  • While doing  F-32 i am getting the The difference is too large for clearing

    Dear Gurus,
    I am getting the below message while clearing customer open items in f-32.
    The difference is too large for clearing.
    Regards,
    Prasad

    When you are clearing the Debit and Credits in F-32, You need to see the below things.
    1. Bothe Debits and Credits are mathcing, means Negatives and Positives are matching or not.
    2. If there are any discounts line items automatically generating coming
    3. Forex transactions are also there
    4. Just check the entire program again
    Thanks

  • Does anyone know why I get the following error message when I select the Save All action?

    New to using Robohelp 10
    Error Message

    Probably, the file root.fpj (in your project root) is read only or
    corrupted.
    Check whether the file is read only and make it readable.
    Perhaps the root.fpj got corrupted. You can fix that with the following
    script: http://www.wvanweelden.eu/product/missing-topics-fixer
    Kind regards,
    Willam

  • While consuming a webservice I am getting the following error :

    Exception occurred in communication framework:Error in HTTP Framework:500SSL Peer Certificate Untrustedhttps://test:44315/sap/bc/srt/wsdl/flv_10002A111AD1/bndg_url/sap/bc/srt/rfc/sap/z_ws_test/001/z_ws/ztest?sap-client=001
    Exception of class CX_PROXY_GEN_ERROR
    Please suggest what might be the issue??
    Thanks
    Siju

    Hi,
    See if the Note:367831.1 from Oracle Metalink can help you
    Cheers
    @Manesh
    Sorry for duplicate, I don't refresh the page before posting ...
    Message was edited by:
    Legatti

  • While doing a export I am having the following error:ORA-1406....

    EXP-00008: ORACLE error 1406 encountered
    ORA-01406: fetched column value was truncated
    EXP-00000: Export terminated unsuccessfully
    We have:
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
    PL/SQL Release 10.2.0.2.0 - Production
    CORE 10.2.0.2.0 Production
    TNS for HPUX: Version 10.2.0.2.0 - Production
    NLSRTL Version 10.2.0.2.0 - Production

    Hi,
    See if the Note:367831.1 from Oracle Metalink can help you
    Cheers
    @Manesh
    Sorry for duplicate, I don't refresh the page before posting ...
    Message was edited by:
    Legatti

  • I am getting the following error...

    Hi All,
    I am getting the following error while loading the data into data targets. The data was loaded into PSA , but while loading into data targets am getting the following error message , kindly rectify it.
    Processing in Warehouse timed out; processing steps mising
    Diagnosis
    Request processing in the BI system is taking a long time and processing step Second step in the update has still not been executed.
    System Response
    Caller is still missing.
    Procedure
    In the process overview in the BI system, check whether processes are running in the BI system under the background user.
    If this is not the case, check the short dump overview in the BI system.
    Thanks in advance,
    Ravi Alakuntla.

    Dear Ravi,
    You are getting the message of time out because you must be loading huge volume of data and BW runs for a specific peroid of time and then it gives a dump with message as processing is overdue.what you can do is first you should drop the indexes of the cube and then you should manually load the data-packets.I think you can again load the failed data package.select the failed data package in the monitor screen.then go to edit(on upper left next to monitor).In Edit select Init update then select "settings for further update" now select that process should be run in the background.Now right click on the failed datapacket and select Manual update.
    Hope this works for you.
    With Regards,
    Prafulla

  • While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54).  What does this error mean and what can I do about it??

    While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54).  what does this error mean and what can I do about it??

    The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

  • I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

    I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

    Hello Drake, I suspect one or more of the Drives needs repairing, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • I get the following error message day in and day out, what does it mean -- what can I do to make it go away? The server responded: "403" to operation CalDAVWriteEntityQueueableOperation.

    I get the following error message day in and day out, what does it mean -- what can I do to make it go away? "The server responded: “403” to operation CalDAVWriteEntityQueueableOperation."

    Now it keeps saying that it is restored but there is still no music or video on it. And a new error is coming up that says "We could not complete your iTunes store request.The iTunes Store is temporarily unavailable. Please try again later."

  • After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

    After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Yours Bengt W

  • I am using a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). How can I get a faster response?

    I am trying to create a virtual engine within a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). This does not however allow realistic engine speeds. How can I overcome this? I have access to a PCI-MIO-16E-4 board.

    andyt writes:
    > I am using a timed while loop and am unable to get the loop to run at
    > a speed of less than 1ms (I am currently using the Wait(ms) function).
    > How can I get a faster response?
    >
    > I am trying to create a virtual engine within a timed while loop and
    > am unable to get the loop to run at a speed of less than 1ms (I am
    > currently using the Wait(ms) function). This does not however allow
    > realistic engine speeds. How can I overcome this? I have access to
    > a PCI-MIO-16E-4 board.
    Andy,
    Unless you use a real time platform, getting extactly 1 ms loop rate
    (or even less) is impossible. It starts getting troublesome at about
    0.1 Hz for standard operating systems.
    I'd tackle your problem with "if i mod 10 == 0 then sleep 1 ms".
    Of
    course this is jerky by design.
    HTH,
    Johannes Nie?

  • While creating customer master  i am getting the Communication error

    Hi experts,
    while creating customer master  i am getting the  Communication error with the external tax system (VERTEX_MS0018)    please tellme how to solve this issue
    Regards,
    Anil prasad
    Edited by: prasadanil on Sep 16, 2011 12:52 PM

    hI Prasad,
    It seems you are maintaining the address data for a country with jurisdiction code. Different external control systems can behave in different ways.
    1. You entered a jurisdiction code that matches the postal code but not the city (possibly due to a typo).
    a) Behavior when you use Taxware: There is no message and data can be saved.
    b) Behavior when you use Vertex: Due to the incorrect city, no comparison jurisdiction code can be determined and message TAX_TXJCD861 is issued with a text from the vertex system that may be unintelligible.
    2. You do not enter a jurisdiction code, but you do enter a postal code and a city that does not match the code (possibly due to a typo).
    a) For Taxware: If the jurisdiction code could not be explicitly determined, a selection dialog box containing the relevant tax jurisdiction codes for the postal code appears. You select one. This and the corresponding city are transferred.
    b) For Vertex: The TAX_TXJCD861 message is issued (behavior as in 1b). Other terms TAX_TXJCD861, TAX_TXJCD101, TAX_TXJCD107.
    For resolving this issue, you can check SAP Note 677850 - Address data: Check/new determination jurisdiction code.
    Hope you will resolve the above issue with these inputs.
    Let me know if you need any further details.
    Ravi.

  • While trying to burn a DVD off IMovie 09 I get the following message while trying to prepare: Unable to prepare project for publishing because an error occurred (-2125)

    While trying to burn a DVD off IMovie 09 I get the following message: Unable to prepare project for publishing because an error occurred (-2125)  Happened several times even after deleting and starting over. 

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Yours Bengt W

  • When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not a

    When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)

    Maybe a Preferences reset can help:
    Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
    Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
    Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.  
    In the Reset Settings dialog box, select one or more of the following options:  
      Reset Preferences 
    Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
    Purge Entire Thumbnail Cache
    Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
    Reset Standard Workspaces
    Returns Adobe predefined workspaces to their factory default configurations.
    Click OK, or click Cancel to open Adobe Bridge without resetting preferences.   

  • While partitioning in Lion 10.8, I get the following error message: I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:  DiskManagementTool has died

    I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
    DiskManagementTool has died. Disk Utility will need to be restarted.  The log shows the following:
    2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
    2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
    2012-09-10 11:20:51 -0700:      2 partitions will be created
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700:      Partition 1
    2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
    2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
    2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
    2012-09-10 11:20:51 -0700:           Do not erase contents
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700:      Partition 2
    2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
    2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
    2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700: Beginning partition operations
    2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:55 -0700: Disk Utility started.
    Does anyone have any thoughts?  Cant find anything on the web with this

    I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
    DiskManagementTool has died. Disk Utility will need to be restarted.  The log shows the following:
    2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
    2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
    2012-09-10 11:20:51 -0700:      2 partitions will be created
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700:      Partition 1
    2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
    2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
    2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
    2012-09-10 11:20:51 -0700:           Do not erase contents
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700:      Partition 2
    2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
    2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
    2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
    2012-09-10 11:20:51 -0700:
    2012-09-10 11:20:51 -0700: Beginning partition operations
    2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
    2012-09-10 11:20:55 -0700: Disk Utility started.
    Does anyone have any thoughts?  Cant find anything on the web with this

Maybe you are looking for