While doinh Miro Cenvat clearing excise not flowing.
Dear all ,,
we have one po in that we maintained same material with qty 10.we maintained J1ID for that material.
we have received migo two times first time 5 qty and second time 5 qty we have updated part1 and part2 also posted,
we received two excise invoice and updated part2 also .
ANd we have received two good invoice ,while miro for first invoice excise is coming in Cenvat clearing ,,
But for second invoice excise is not flowing to CENVAT CLEARING,,
Kidly suggest me what may be the reason .
Thnaks in advance
Thanks and Regards
Girish.
Dear all...
any suggestion,,
Similar Messages
-
MIRO--CENVAT CLEARING ACCT NOT APPEARING.
Hi All,
In PO ,we are maintaining only JIPC ( cst ) for a tax code, But while GR we are capturing excise( cenavtable), now while doing MIRO cenvat clearing acct is not appearing when we simulate.
Is it prerequisit to maintain excise condition in PO so that cenvat clearing acct appears while doing MIRO?
Regards,
Manishyou need to maintain the excise conditions in the PO. What you can do is maintain the values eg. BED 16% and if you have different percentages or values of excise for different materials. Then the t.code FV11 allows you to maintain your condition on the basis of material, material plant and other combinations.
If this does not help then one more suggestion is to maintain a certain condition and percentage in the PO, and when you do the J1IEX capture you can manually go and change the values in the Excise Value tab. Try this and see what entries are passed after J1IEX posting. But this method would require manual intervention, i mean the value will ahve to be changed each time while capturing. and a mistake may cause problems. -
MIRO CENVAT CLEARING a/c debit not simulating
PO created for an item. Excise taxes entered.
Multiple GR taken place for the same item, with Exise Part I and Part II posted correctly.
During MIRO simulation, only one GR based entry is not simulating cenvat clearing debit entry.
Nothing in customizing has changed, as it would have had effect on all GRs.
Also J1ID mainatined properly, since all GR based enties have the same material, chapter ID & Vendor combination
What factors influence the Cenvat accounting entry in miro?In J1IEX duties tab, value has come in 'Duties Due' instead of 'Duties Availed'
Posted to Cenavt Debit entries in MIRO through the 'GL Account' tab
Thanks everyone for trying. -
CENVAT Clearing Acount not getting cleared through F.13 after MIRO
Dear All,
I wanted to clear Cenvat Clearing Account on the basis of Assignment field which should have Purchase Order Number.
I maintained Sort Key as "014" Purchase order in Cenvat Clearing Account Master Data.
However, RE Documents created by MIRO transaction do not populate Purchase Order in Assignment field instead it populated "00000".
So, How to updated PO number in miro for Cenvat clearing account.
Thanking you in Advance.
Regards,
Ranjeetsingh ThoratHi,
For this you have to create the subsituation and use the exit to populate the PO number in Assignment field.
Follow the below link
[PO number in MODVAT Clearing account line item at the time of MIRO;
Regards,
Shayam
Edited by: Shayam_210 on Sep 5, 2011 12:15 PM -
Clearing charges not flowing in MIR7
hi all
can anybody clarify me , while doing the invoice verification for import PO for clearing charges.
In Import PO allthe conditions i have maintained properly. but
The values are not flowing in MIR7.
what might be mistake , how to identify .
Than ks
sap-mmhi
as we are not doing GR based IV ,system will not pick values for customs duty u have to maintain it manually only
now u have to capture the excise in J1IEX only as we r doing miro first and then GR and also we dont maintain the excise tax code (we have to maintain zero taxcode)
plz check following process
Import scenario
1.Create material master of import goods.
2. Create vendor master record of import vendor and Customs clearing vendor.
3. Maintain CIN settings.
4. Maintain J1id.
5. Maintain Pricing procedure SAP standard JIMPOR.., maintain required conditions..JCDB, JCV1...
6.Assign the schema to respective import vendor in purchasing view of VMR.
7. Create import PO, check in conditions of JCDB, JCV1 the customs clearing vendor(Indian vendor) and percentage is assigned. This can be done by In condition tab select condtion then click on display, then enter.
Save the PO.
8. MIRO --Capture Bill Of Entry.(Commercial Invoice No.,).Customs clearing first .Here CVD will be converted to BED (manual entries).
9. capture Excises invoice--j1iex.
10.MIGO.
12.Post Excise Invoice.
13.MIRO...Payment to vendor(import vendor)
regards
KI -
Excise not flowing from J1IS to MIGO
Hi All
While Stoch Transfer, in J1IS we give excise and document created while doing migo only base value is flowing BED ECS SECess not flowing ,what to do to get excise to flow directly without manual entering in migo.kindly help me in this regard
regards
kumarHi,
Pl. refer following thread for STO Process, hope it will help you.
[STO Process?]
[STO process]
Regards,
Vikas -
Taxcode changed,excise not flowing
dear all,
we are following TAXINJ procedure, due to recent change in the ed from 14 to 10 we have changed the tax code from 14% to 10%.
we are now facing the problem that the excise values are not following at the time of PO creation and as well as in MIGO.
kindly guide me.
Regards,
veluhi
do u getting proper calculation in invoice tab of po
if no then
FOR TAXINJ process
u have to change the validity of exising records of excise in J1ID
u have to go to J1ID and in excise rate maintainance u have to change the validity (**** to 7.12.08) and then save and then copy all records with new validity (8.12.08 to 31.12.2099) and 10 % value
hope it clears
regards
kunal -
Clear Cenvat clearing GL item through F-03
Hi..
After MIGO while excise is captured through J1IEX then Cenvat clearing GL become credit. And during MIRO Cenvat Clearing GL become debit. And last week company closed last financial year and carry forwarded to current year. Now I want to clear Cenvat Clearing GL open item through F-03. But at present through F-03 Cenvat clearing GL not able to clear items.
How I can clear items under Cenvat Clearing GL account through F-03 ?
With Regards,
SamratHi
Try in F.13 to clear cenvat clearing GL.
Regards
Sandesh -
Validation code for business area and cenvat clearing accounts
Dear Friends,
In order to prevent the users from entering the wrong business area in the correct company code, I have written the validation as below.
Prerequisite : BSEG-BUKRS = '1000'
Check : BSEG-GSBER = 'ABC' OR
BSEG-GSBER = 'DEF' OR
BSEG-GSBER = 'GHI' OR
BSEG-GSBER = 'JKL'
Message : E - 023 - Please Check the Business Area.
While trying to post Miro, cenvat clearing accounts is not picking up business area and giving an error "Please check business area" ,
I want the validation rule not to consider or evade the cenvat clearing accounts and post the miro.
The user is also making another mistake. Ex: in the debit he should enter ABC(Business area) and in Credit also he should enter ABC (Business area). He is wrongly entering GHI which is affecting the trial balance.
Please suggest what changes to be done to the validation.
Regards
Sridharthe issue is closed
-
Shelf life from material master not flowing into purchase order
Hai friend
I have set a shelf life value in material master ( both minimum & Total shelf life).
But while creating purchase order, values are not flowing from material master to purchase order.
The field is empty.
How to configure, please help.
Regards
Rammohan1.activate batch management
2.to calculate SLED production date/date of goods receipt is mandatory during GRN
3.Maintain characteristic for production date MCH1 - LFWRT
4.assign this to class
5.Maintain this class to material
6.Now do GR ,it will prompt for production date .based on this ,sytem will calciulate SLED
hope it helps -
MIRO error-qty & amount not display
Dear gurus,
While doing miro,after entering deliver note no. & calculated taxes,
no qty & amout display. we have verify the Migo document it is ok, What will be the possible causes,
Regards,
DevenHi,
Since you are doing MIRO WRT to the delivery note.
the Delivery note is a Text feild in GRN and it is enered Maually.
Some times cope controls are maintained to fill it by Date.
It is Updated in MSEG table as reference Number.
Know in your case Either you are entering the delivery note number Wrong with some blanks.
or second reason could be the GRN against the delivery note could have got reversed.
Check the GRN document and reversl Document if any in MSEG Against the Delivery note.
Hope so it could be the reason for the same.
Regards
Anjanna -
Cenvat clearing account is not coming in MIRO for Basic excise
Dear sir,
I have created the PO . After that i did GR for same at that I capture excise invocie& post it.
Accounting document is created for the same
here is accounting enrtry
cenvat Basic = 100 debit
cenvat edu cess = 2 debit
Cenvat Higher Ecess =1 debit.
Cenvat clearing account = 103 credit
when i go the miro
after simulating in miro i found
cenvat clearing account = 2 debit
but it should be 103 debit
why this is coming please help me...Hi,
Generally it happens if CENVAT Clearing Account in not assigned in OB40 to the Tax Account Keys. But, as per you it has been maintained. So the following if you are using Tax Procedure TAXINN;
SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Condition-Based Excise Determination > Classify Condition Types -
Cenvat Clearing not coming in MIRO in case of Dealer Invoice
Hi,
This is a scenario of purchasing from dealer wherein the exact excise duty and VAT/CST is not known while creating a Purchase Order.
I did the following steps
Created PO with
One item of 5 quantity @ 1000 INR (Total Base Value = 5000 INR)
Assigned a tax code (V3) with Nil Excise and 5 % VAT Deductible
Did Goods Receipt (with Capture Excise Invoice Only)
Selected MRP Indicator
In Excise Tab at Item Level
Changed Base Value from 5000 to 4485 INR
Put BED as 500, ECS as 10 and SEcess as 5 INR
Posted the Excise Invoice in J1IEX, here the Cenvat Clearing Account was credited with 4485 INR
Now while trying to do Invoice Verification in MIRO
Again changed the base Value from 5000 to 4485 INR and selected the same Tax Code (V3) which was used in PO
Now the system is not considering Cenvat Clearing Account (Excise Duty) and since Excise duty is not being taken into account, the VAT is being calculated on the basis of Base Value (4485 INR) only not on the Base Value + Excise Duty
Please give me ideas to resolve this issue
Thanks in advanceThese are the details about the Tax Code (V3) being used and its condition record
Procedure TAXINN
Tax Code V3
Desciption Excise Nil and VAT 5%
Excise Duty JMOP 0
Set Off JMX1 100
EduCess JEC1 0
EduCess Set Off JEX1 100
SEduCess JSEP 0
SEduCess Set Off JHX1 100
VAT (RM) Claimable JVRD 5 -
Cenvat clearing account is not cleared while posting AP invoice.
Hi experts
If the tax code involves the Excise duty 100% non deductible, then the cenvat clearing account is not getting closed properly. please refer the below attachment and help me to solve this issue.
1.while posting GRPO
2. Incoming excise Invoice
3.AP invoicehi
I am wonder that still i did not get any reply or work around or suggestion from anyone of SAP experts for the above issue. -
GR based IV" then in MIRO the Cenvat clearing A/c is not getting picked up
If we have creating a PO without checking "GR based IV" then in MIRO the Cenvat clearing A/c is not getting picked up, due to this we are not able to create MIRO document with Excise duty value.
We are using Tax calculation procedure TAXINN.
Regards,
Rama MohanHi,
Check in the following path :
Material Management > Purchase Order > Define screen layout at document level
Choose ME21N for details and check by double clicking the GR/IR control whether GR based invoice verification
is an optional entry.
Regards,
Sadashivan
Maybe you are looking for
-
Getting error while passing implicit request object from JSP to JavaBean
Hi, I am getting error while passing implicit object ie( request object) from within JSP to JavaBean. Following is source for JSP, JavaBean and Error message I am getting. vaLookup.jsp Source <jsp:useBean id="db" class="advisorinsight.javabeans.Displ
-
How to rip DVD, convert video, transfer iPod music and make iPhone ringtone
Part 1. How to rip DVD to iPod/iPhone/Sansa/PSP/Zune and other MP4 and MP3 Players Part 2. How to convert all video to MP4, AVI, FLV, 3GP, WMV, MOV, MPG, RM, RMVB, MKV, VOB… Part 3. How to transfer music from iPod to computer, computer to iPod, iPod
-
What to use to store binary data in Java
Hello, I have to read data stored as varbinary in the SQL database. What kind of class, data type I can use to store binary data from database? I need to store binary data finally in ByteBuffer. Please, help. Thank you!
-
Load balancing and javanode still stand
Hi, we have three instances of java running in our productional enviorment to get a load balancing. From time to time one of this instances is stopping working on channels, whereas the others are still continously processing messages. Unfortunately t
-
How can we move a member in a BSO cube other than the manual move in EAS?
When I add a member to the dimension, it gets added at the bottom. Is there a way we can add at the top as a first child of that current member. I don't want to sort. Or is there a way we can move the member by any other means other than manually mov