While downloading GOA through standard download functionality .
Hello firends,
While downloading GOA through standard download functionality .I need to add one extra column to excel sheet in standard download functionality.
Please give some inputs.Any standard functionality avilable.I mean any BADI or exit.
Thanks in advance.
BR,
Anil
hi.
Try using BBP_PD_DOWNLOAD method: APPEND_DOWNLOAD_DATA to append your own data.
Cheers, Renga
**Award points for helpfull answers**
Similar Messages
-
I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?
problem solved.
I phone 4s screen froozen -
a movie i purchased does not show up in the download after it suddenly stopped while downloading over half way through.. help!
I totally agree, I am not going to discredit your comment as everyone is entitled to their opinion as I am BUT, I will not bad mouth other members, especially since may have not have written my initial statement in a logical manner so Ill try and answer them in order to your response.
1. I DO LIKE iTunes in general and on the whole BUT I dislike the new update, iTunes 11, it has completely buggered everything up.
2. Prior to the update, everything worked brilliantly, including Apple TV. It was user friendly and was easy to use. The new update is counter-intuative and is hard to find, fix anything and as I have had to find out at my cost, reset my Apple TV and start downloading all over again. So let me reaffirm, it is iTunes11 I find hard to fathom, not the old iTunes.
3. No I am not a developer but I have been using PC's for over 20 years so I do know how one works.
4. Good Question about who would help me, again, it is someones opinion against someone elses. One day, I may write something that generally people agree with, another they may not, depends on the subject.
5. " I do not love Apple" ?yet I have an iPhone 4s, iPad and Apple TV, find that an illogical comment!
6. I have made a General Search on the forums on the subject and the general consensus is that the new update is one update to far.
7. Oh, I am not a genius otherwise I would have solved the issue in the first place!
Just to re-iterate, I am not bad mouthing Apple in general, all I am saying is that iTunes 11 is one update to far and I am not the only one saying it.... some have gone a lot further than I have, again, their opinion and who am I to argue with them as I have an opnion as you do and I will most deffinatly not bad mouth a member because I disagree with them for the above reason, debate it, yes, not belittle them.
Hope these have cleared up my initial statement? -
Code asked for while downloading Adobe creative suite 6 Design Standard
while downloading the Creative suite 6 i was aked for a code on the top left of the inside box ...doesnt seem to be one....is this PNn umber on the adobe sticker on the end of the box.
help!you're probably being asked for the serial number, http://helpx.adobe.com/x-productkb/global/find-serial-number.html
if you're not being asked for the serial number, attach a screenshot showing the request dialog, http://forums.adobe.com/message/4209263#4209263 -
Problem while downloading the alv output to excel file.
Hii,
While downloading the alv output to an excel file i am facing a problem. Either the output comes as 1.23456E+11 or the values get cut .
Cant put in txt file as the users require to calculate directy and i have even tried to increase the output length .But both doesnt help.
So what are the other ways to do so.
Edited by: mansi_v27 on Mar 24, 2010 12:35 PMHi,
Welcome to SCN!!!.
Please go through the forum rules. This has been discussed many times. You can search in the forum for this.
Infact there is no problem. Just expand that excel cell. You can see the full value. This is standard excel property.
Thanks,
Vinod. -
Wolfenstein: The New Order message "please wait while downloadable content is being validated"
When starting Wolfenstein:The New Order, the game goes through all the publisher/developer title screens and goes briefly to the standard loading screen then the screen goes totally black. If I press a button on the controller, the game shows the "Loading profile" prompt with the spinning circle. Soon after the message is replaced with "Please wait while downloadable content is being validated". Here is where the game just hangs forever. I have left it on this screen for over an hour and nothing happens. I contacted Bethesda support and they sent me here saying it is a PSN issue. I have already tried uninstalling and deleting all save games, etc. but the problem persists even on a non-patched game. This started happening on Sunday and I have already played the game through once and was on second playthrough and this is the first time I have encountered the problem. Greetings!Thank you for contacting Bethesda Technical Support.
The issue you are experiencing may be related to PSN and/or Internet connectivity. Please make sure that you were signed into PSN and online when trying to run the game as it needs to validate the downloadable content. If for some reason this issue persists you will need to contact Sony support for your PS4 as the validation process is ran by them on their end and not an issue we can investigate.Warm Regards,
The Bethesda Technical Support Team. From what I can tell, I am signed in to PSN since I can access the store and see my trophies and friends online. When I signed out and signed back in, I did get a message about not being able to reconnect but it did eventually. I have done extensive searches on the web and I don't see anyone else having this issue.I am having the same exact problem. I got this game from gamefly last week and it did it. I told gamefly they sent me an entirely different game and it still is hanging up at the validating dlc screen, a wheel just continues to spin and nothing happens. My interent is fine and I am connected to PSN as I too can see that my friends are onine.
-
While downloading the latest IOS update to my iPhone 4S, my phone went into a frozen state with the update 2/3's complete. It's remained like this for the past 12 hours. I can't turn the phone off, and I can't connect it to iTunes. Anyone know what to do?
If the place of purchase does not have a 'Lemon' policy (three replacements = refund or complete exchange), sadly you are out of luck.
And Apple themselves do not have any power over what policy a reseller uses. You can call Apple Care and have them replace it, but the odds are you would probably get a standard replacement again like has previously happened. I'm pretty sure Apple holds their own sort of 'Lemon' polocy where if it's been replaced three times through them they'll swap it out for a brand new phone. Not 100% sure though, best bet is too call them again.
And it ***** getting a response like that from their support personel, but hey, they can't all be that bad can they? I'm sure if you plead your case they'll try and help out. I've dealt with them in the past and had one or two people that rubbed me the wrong way, but most of them have been a great help and kept me a happy customer, haha.
Regards,
ThatGuy -
I have a PB G4 Rev D (1.67, 2gb ram, 128 vid) that is just over 3 years old.
I have the latest release of Tiger running on it. Just prior to updating I noticed that while downloading from iTunes or the internet whether the file is 1gb or 60 gb my computer lags. The download doesn't but I can't really use the mouse as it just stalls. When I can get it to move I click on something else (another window) and it takes a few moments to register.
I updated to the latest release of Tiger in hopes that fixed everything, no dice. I hooked my computer directly to the internet, no dice. Finally I checked to see that everything was working (hard drives (verify/repair, hardware, software, ram slots) and everything seems to be in order.
This being a new development I'm lost. I am about 12 days out of Apple Care and would like this machine to last about another 3 months until I get back from my East coast trip.
Does anyone know what could cause this or what else can be done to perhaps fix the issue?
I also watched my activity monitor while downloading. Nothing else was moving but iTunes would take between 15 and 70% of my cpu (it fluctuated constantly) while downloading.Several questions comes to mind ...
1. You mentioned mouse. If you disconnect the mouse and use the trackpad during download, still have the issue? Do you have any external devices plugged into any port? If yes, unplug and recheck behavior.
2. Did the problem start after installing any new software or hardware drivers?
3. If you have nothing else running, ie no iTunes, does the behavior change?
4. Do you have any 3rd party drivers installed? If you go to system preferences is there anything listed under 'other' or if you look at login items under accounts? If you remove them, does that change the behavior (if there are login items, set up another login account with no login items, reboot and use it... does behavior change)? If you do have, for example, a mouse driver, you might download a fresh copy.
Have you reset PMU and PRAM? http://docs.info.apple.com/article.html?artnum=14449 and http://docs.info.apple.com/article.html?artnum=2238 . Any change in download behavior?
If you've already considered those with no change in lag, then ... while the issue came up before the upgrade to 10.4.11, did you do that and prior updates through software update function? If so, download the combo update from http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
Before you install it, if you don't have OnyX, get the Tiger version from http://www.titanium.free.fr/pgs2/english/download.html . Do the cleaning and maintenance tabs, ensuring you clear the system caches amongst the activities. You may need to reboot your system.
Then repair permissions, install the combo update, then repair permissions again. So you can now be pretty confident that you have a complete operating system, as clean as can be without an erase and install of the hard drive. Working now? -
HI Experts
What is the Function Module for download a file into presentation server and Application Server.
where do i get brief info about BAPI and BADI
Thanks in advanceHi
For presentation server download, u can use GUI_DOWNLOAD
For application server download, u can use Open Dataset and Close Dataset commands
what is BAPI?
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
u can check the below the material also
Example Code
U need to give the step_nr, item_nr, cond_count and cond_type so the correct conditon will be updated. If no condition exists for the given parameters, a new condition will be created.
U can find these parameters for a particular condition type in table KONV.
*& Form saveTransactionJOCR
text
--> p1 text
<-- p2 text
FORM saveTransactionJOCR .
data: salesdocument like BAPIVBELN-VBELN,
order_header_inx like bapisdh1x,
order_header_in like bapisdh1,
return type standard table of bapiret2 with header line,
conditions_in type standard table of bapicond with header line,
conditions_inx type standard table of bapicondx with header line,
logic_switch like BAPISDLS,
step_nr like conditions_in-cond_st_no,
item_nr like conditions_in-itm_number,
cond_count like conditions_in-cond_count,
cond_type like conditions_in-cond_type.
salesdocument = wa_order_information-VBELN.
LOGIC_SWITCH-COND_HANDL = 'X'.
order_header_inx-updateflag = 'U'.
conditions
clear conditions_in[].
clear conditions_inx[].
clear: step_nr,
item_nr,
cond_count,
cond_type.
step_nr = '710'.
item_nr = '000000'.
cond_count = '01'.
cond_type = 'ZCP2'.
CONDITIONS_IN-ITM_NUMBER = item_nr.
conditions_in-cond_st_no = step_nr.
CONDITIONS_IN-COND_COUNT = cond_count.
CONDITIONS_IN-COND_TYPE = cond_type.
CONDITIONS_IN-COND_VALUE = 666.
CONDITIONS_IN-CURRENCY = 'EUR'.
append conditions_in.
CONDITIONS_INX-ITM_NUMBER = item_nr.
conditions_inx-cond_st_no = step_nr.
CONDITIONS_INX-COND_COUNT = cond_count.
CONDITIONS_INX-COND_TYPE = cond_type.
CONDITIONS_INX-UPDATEFLAG = 'U'.
CONDITIONS_INX-COND_VALUE = 'X'.
CONDITIONS_INX-CURRENCY = 'X'.
append conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = salesdocument
ORDER_HEADER_IN = order_header_in
ORDER_HEADER_INX = order_header_inx
LOGIC_SWITCH = logic_switch
TABLES
RETURN = return
CONDITIONS_IN = conditions_in
CONDITIONS_INX = conditions_inx
if return-type ne 'E'.
commit work and wait.
endif.
ENDFORM. " saveTransactionJOCR
Bdc to Bapi
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
[for VA01 use BAPI_SALESORDER_CREATEFROMDAT2]
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
Bapi to VB(Visual Basic)
Long back I had used the following flow structure to acheive the same.
Report -> SM59 RFC destination -> COM4ABAP -> VB.exe
my report uses the rfc destination to create a COM session with com4abap. com4abap calls the vb.exe and manages the flow of data between sap and vb exe.
You need to have com4abap.exe
If com4abap is installed you will find it in sapgui installatin directory , C:\Program Files\SAPpc\sapgui\RFCSDK\com4abap.
else refer OSS note 419822 for installation of com4abap
after making the settings in com4abap to point to the vb program and setting up rfc destination in sm59 to point to com4abap session , you can use the following function modules to call the vb code.
for setting up com4abap and rfc destination please refer to the documentation for com4abap.
Invoke NEW DCOM session
call function 'BEGIN_COM_SESSION'
exporting
service_dest = service_dest "(this will be a RFC destination created in SM59)
importing
worker_dest = worker_dest
exceptions
connect_to_dcom_service_failed = 1
connect_to_dcom_worker_failed = 2
others = 3.
call function 'create_com_instance' destination worker_dest
exporting
clsid = g_c_clsid
typelib = g_c_typelib
importing
instid = g_f_oid
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
call function 'com_invoke' destination worker_dest
exporting
%instid = g_f_oid
%method = 'UpdatePDF'
sntemp = g_v_const_filent
snsysid = sy-sysid
snflag = 'N'
tables
rssaptable = g_t_pdfdetail1
%return = g_t_pdfdetail1 "t_test
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
then close the com session , using
FM delete_com_instance
FM END_COM_SESSION
http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/5e114a4a1611d1894c0000e829fbbd/frameset.htm
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
BADI
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activate adapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Thanks,.
Shakir -
Avoid splitting of columns ALV report while download output to Excel sheet
Hi friends,
I have 170 columns in my ALV report
while downloading the report to Excel sheet
the column descriptions and values are splitting in two lines.
How can i avoid the problem.
before calling REUSE_ALV_GRID_DISPLAY function module in my code
for the Layout i assigned LS_LAYOUT-MAX_SIZE = 1023.
but still the problem is not solved.
Please help me in this Issue.
Thanks in Advance,
GaneshHi friends,
I dont want to use and Keyboard shiftcntrl....
or dont want to change any code in ALV report
by simply assigning some value to any of the export parameter in ALV function module
can we achieve the functionality
Thanks in Advance,
Ganesh -
Field names are not getting into excel sheet while download
Hi All,
I am using gui_download fm to download internal table data to excel sheet.
have passed fieldnames parameter also.
defined each column with char type and length of those descriptions also.
but while downloading only first column description is getting.
Please help me.
Thanks in advance.
Regards,
eswarhi,
check this sample code.
DATA : BEGIN OF it_join_fields OCCURS 0,
field_name(20),
END OF it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'pernr'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'empname'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'new_joinee'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'begda'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'fath_name'.
APPEND it_join_fields.
CLEAR it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'gbdat'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'gesch'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'usrid_long'.
APPEND it_join_fields.
CLEAR it_join_fields.
it_join_fields-field_name = 'werks'.
APPEND it_join_fields.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = file_name
filetype = 'ASC'
append = 'X'
write_field_separator = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
SHOW_TRANSFER_STATUS = ABAP_TRUE
IMPORTING
FILELENGTH =
TABLES
data_tab = it_join_det_new
fieldnames = it_join_fields
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Warning while downloading an Excel file from WD ABAP
Hi folks,
In one of requirements, Client wants to download all the data that is appearing on the screen ( WD ABAP Application ) to an Excel with a layout in different manner.
We achieved this with Simple Transformations.
Now the question is while downloading the excel file, the framework/other is throwing an Warning like
" The file you are trying to open, 'info.xls', is in a different format than specified by the extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now? "
Note: All the users of my client are using MS Office 2002 / 2003.
I am using the following code........!
*------ Call Transformation for Excel OUTPUT
CALL TRANSFORMATION ZEXCEL_OUTPUT
SOURCE
t_dates = t_dates
t_info = t_info
RESULT XML l_xml_string.
REPLACE ALL OCCURRENCES OF '<?xml version="1.0" encoding="utf-16"?>' l_xml_string WITH '<?xml version="1.0"?><?mso-application progid="Excel.Sheet"?>'.
**-- Call Function Module for converting string data to XSTRING
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = l_xml_string
mimetype = 'application/xml'
IMPORTING
buffer = l_xml_xstring
EXCEPTIONS
failed = 1
OTHERS = 2.
CALL METHOD cl_wd_runtime_services=>attach_file_to_response
EXPORTING
i_filename = 'info.xml'
i_content = l_xml_xstring
i_mime_type = 'application/vnd.ms-excel'.
With this code I am generating a file of type XML SPREADSHEET 2003. While opening this file I am getting the above message which the user unwanted......
Can any one help me on this -
> How to avoid this warning?
Thanks and Regards,
Aneel Danda
Edited by: danda aneel on Jul 13, 2010 1:43 PMFirstly, Thanks for Your quick Response, Thomas.
Even though what ever may be the file name I am passing either info.xml or Info.xls , In error info.xls is coming.
Kindly provide me an alternative on this XML doesn't seem like it would match the 'application/vnd.ms-excel'.
what is the supported format.?
Similarly, It is not considering the UTF-8 / UTF-16 for xml.........same result is appearing in the output.
Edited by: danda aneel on Jul 14, 2010 7:52 AM -
Error while downloading data into excel file.
Hi,
I have a requirement to download data available in xstring to excel file.
I have a RFC which has export parameter 'file_data' of type xstring. When i call RFC
from web dynpro abap application it gives data out pout in xstring format.
I am opening excel file using that xstring data as below
cl_wd_runtime_services=>attach_file_to_response(
i_filename = 'file.xls'
i_content = ls_data_source-data_source ***[xstring data from RFC]
i_mime_type = 'x-excel/application'
i_in_new_window = abap_true ).
But excel file not coming in correct format. its giving an error while download
excel file
Error is
" the file you are trying to open , 'file[1].xls', is in a different format than
specified by the file extension. Verify that the file is not corrupted and is from
a trusted source before opening the file. Do you want to open the file now? "
If i click on 'YES' button file opening but not in proper excel format. Data is coming
in tab delimiter format in excel file.
Please suggest any solution for this problem.
Thanks,
Venkat.Hi Thomas,
Following is the logic implemented in RFC which is giving XSTRING as export parameter
STEP1 create a dynamic internal table
Create field catalog for the table using LVC_FIELDCATALOG_MERGE
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = dyn_table.
CREATE EXCEL SHEET BY SENDING FIELD CATALOG AND DATA TAB
STEP2 # Convert text table to xstring.
CALL FUNCTION 'SCMS_TEXT_TO_XSTRING'
IMPORTING
buffer = l_content
TABLES
text_tab = lt_data_tab
EXCEPTIONS
failed = 1
OTHERS = 2.
STEP3 *# Psss Data to Netweaver
PERFORM pass_data_to_nw USING is_import
CHANGING es_attachment_metadata. -
Error while downloading ALV grid o/p list into local file
Hello friends,
I have developed an ALV report and desplaying it using
'REUSE_ALV_GRID_DISPLAY, function module .While downloading the output list into excel format I am geeting an error "The current statement only supports character-type data objects.
Error Analysis-
In statement
"STRLEN( obj )..."
the argument "obj" can only take a character-type data object.
In this case, the operand "obj" has the non-character type "P".
I have set the import parameter i_save values as 'A'
But still not able to download and facing the same error.
Please help me out ....
Thanking you....
Regards,
Rajesh Akarte
Message was edited by:
Rajesh AkarteHi,
following is the dump code..Is there any problem due to date and currency fields..?
Error in ABAP application program.
The current ABAP program "SAPLKKBL " had to be terminated because one of the
statements could not be executed.
038350 endif.
038360 gs_out-hlplen = strlen( gs_out-hlpchar ).
038370 elseif gs_fc-tech_form = 11. "INS TECH
038380 * Min. Ausgabelänge für ein Datum ist immer 8
038390 if gs_fc-datatype = 'DATS'. "INS TECH
038400 gs_out-hlplen = 8. "INS TECH
038410 * Min. Ausgabelänge für eine Uhrzeit ist immer 6
038420 elseif gs_fc-datatype = 'TIMS'. "INS TECH
038430 gs_out-hlplen = 6. "INS TECH
038440 endif. "INS TECH
038450 elseif gs_fc-tech_form = 1 or gs_fc-tech_form = 90.
038460 * Überführung int. in ext. Format via Konvertierungsexit
038470 if not gs_fc-convexit is initial or "INS TECH
038480 not gs_fc-inttype ca 'CN'.
038490 * elseif not gs_fc-convexit is initial. "DEL TECH11
038500 write Y9CK034230 -
Error while downloading Business Partners from R/3 to CRM in Inbound que
Hi Experts,
I am getting function module "PMPAY/P_CHK_MC" not found error in Inbound queue of CRM while downloading customers from CRM to R/3. I checked this FM is not exist in CRM.
Why this is FM required in CRM, any way to skip this error?
Regards,
KumarGo to IMG>CRM>Basic Functions>Payment Cards>Basic Settings>Maintain Payment Card Type> Here take out checking rule values example 1234 which is assigned to Type. If this dont resolve let me know I will check tomorrow in my system as I dont have access to system now.
Hope this helps.
Maybe you are looking for
-
hello! I updated to ios 8 two days ago and it was ok. I started using my iphone later that day and it just rebooted . Now it wont activate .
-
Trouble with SWF files in Keynote 3
I am working in Keynote for the first time and having trouble bringing in a .swf file. I am having to use a Windows XP box to build the flash file and then moving them over to a Mac to drop into Keynote. I have Keynote 3 and have QuickTime Version 7.
-
Adf with myfaces : ADF_FACES-60032
Hi, I would like tu use adf faces with myfaces 1.2.8. In my web.xml I defined : <default-render-kit-id>oracle.adf.rich</default-render-kit-id> Unfortunatly I got an error when I tried to access my login page : java.lang.NullPointerException: ADF_FACE
-
"VI was stopped at node " " at a call to "In Port Old 6.x.vi""
Hi. I am having problems with a VI that was initially developed for LABView 6i. I have upgraded to LABView 8.2 but whenever I run the program in LABView 8.2 I get the error message that my VI was stopped at node " " at a call to "In Port Old 6.x.vi"
-
MISSING JFP1/JFP2 connection pins (pics)
Just got my new MSI motherboard and started installing everything, and come to the final part of connecting all the jumpers and find there are none.... So apart from reaching inside my case and pressing the power button, I think im stuffed. Board is