While erasing memories from iPhone 4, the phone gets switched off and can't turn on back
while erasing memories from iPhone 4, the phone gets switched off and can't turn on back. Please help.
What exactly do you mean by "erasing memories"?
Similar Messages
-
i left my 4s in the car for apprx 35 mins in 35 degree weather and the phone completely shut off and won't turn back on. the battery was fully charged. please help it is my only ways of communicating beyond my macbook
It probably overheated and shut down. Hold the HOME and SLEEP buttons until an Apple logo appears. This will take 10 to 15 seconds of holding both buttons.
-
My iphone switched off and when I turn it back on it wants to connect to itunes
My iphone switched off and when I turn it back on it wants to connect to itunes
I was taing photo's and battery was half full - I switched it off and when I turned it on it says connect to itunes. I am not near my laptop?! What can I doThat is referred to recovery mode. At this point your only option is to restore to factory & then from a backup if you have one
-
My phone was switched off and doesn't turn on any more
my phone was switched off and doesn't turn on any more.
Hold down power button & menu button hold both down until you seethe Apple Logo you will not lose any data.
Bbsydd uk -
I have someone stolen my iPhone 4 last night, I tried to use (find my iPhone) app to track where is it, but the thief just switch off the handset, can anyone help with this case? I have passcode for that phone, I don't think he can access the phone at the moment! I do worries he trying to sell it later. I just want to ask is there any way to get all the data back from that phone? I know I can remote control the phone to erase the data thr the app, but some data which is very important to me but I didn't backup recently! Can anyone help, please and thank you very much!
I don't think that iphone4 has find my phone app installed!
The Find My iPhone app is for locating other iOS devices. The feature doesn't use the app but has to be activated in settings. You were given that option when setting up and activating the phone and had to decline it if t wasn't activated at that time.
both phone use the same apple ID, will it works on the iphone4 or it will show offline only in my iphone5 app?
No, tracking doesn't use the Apple ID. -
hi i cant restore my i phone 4 please help it is off
They will be gone from the iphone, but you should be syning all contacts to your computer regularly and should be importing all pics to your computer regularly, particularly before any update.
Have you failed to do this? -
when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problemIf it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem. -
atleast once in a week the slide to unlock will not work in my iphone 4 and this is happening from the day i have upgraded to ios7. to access my iphone i have to a switch off and then switch on. really frustrating never expected this from Apple.
Hello sivas_live
Try out the troubleshooting steps in the article to resolve issues with your touchscreen intermittent response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G -
I lost my iphone 5s. The phone is switched off now. What should I do to find it?
I lost my iphone 5s. The phone is switched off now. What should I do to find it?
Look for it the old fashioned way.
-
My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. I've uninstalled and reinstalled all that the steps told me to, I've updated everything in my computer. I don't know what else to do. My phone will just show the apple sign and the itunes plug in sign.
Hey Carolefromthelou,
The following link will provide steps on how to best remove all traces of iTunes from your PC and then reinstall it:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Welcome to Apple Support Communities!
Best,
Delgadoh -
I lost my iphone4. How to track my iphone4 if the phone is switched off
I lost my iphone4. How to track my iphone4 if the phone is switched off
If the phone is switched off, it is inert. It can no more be tracked than a brick with your address and home number written on it.
-
Can anyone help me how to make my iphone 4 work I turned it off and now I turned it back on and it does not work it only shows the APPLE icon on the screen it has being like that for past 9 hours.... HELP PLEASE
Connect iPhone to Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart itself. Usually takes less than 15 seconds of holding both buttons.
If you decide your iPhone is not working properly, and you decide to Restore your iPhone Firmware then do this. Open iTunes on computer, then connect iPhone to computer, then hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware. -
My iPhone has switched off and will not turn back on
mmy iPhone 5c was working perfectly fine this morning whilst I have been in work. But when I left work and checked my phone in my pocket it had switched itself off and will not turn itself back on. I have tried to plug into charger but still not turning on
Hi Kate,
It must be very frustrating to be unable to use your iPhone since it won't even power on. Let's see if we can get things back up and running.
I would suggest that you troubleshoot using the steps in this article -
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Start with the section titled If your device still won't turn on or start up.
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
When i was in a phone conversation my phone has switch off and began to vibrate. I solved with a soft reset. It can be a bad problem?
Is the battery charged?
By factory reset, do you mean you "restored" the iPhone? -
My iphone 4s camera is getting switch off when i use
My iphone 4s camera is getting switch off when i use and when i use HDR function in the camera its getting switch off after taking picture and I wont see the picture where I have taken, can any one help me out in this or I should go to service center
Uninstall the app and reinstall it. If it persists dont use it. simple
Maybe you are looking for
-
Production order Target cost Zero - Varience calculation error KV151
Hi Experts, I am having an issue on KKS2 variance calculation, system throwing error KV151 Target cost is 'Zero' All pre-requisites are ok including BOM, Rates, Routings etc.. Process: Production order with FERT - valuated material, All BOM component
-
Sun Management Console 2.0 - RMIERROR
Hi Guys, SMC Loads up fine, but none of the modules are loading for me sSuch as performance). The error which is returned is : Performance is not able to connect to the server. Reason: RMIERROR. Verify that the server is running. If it is running, tr
-
Websites changing my file associating from Acrobat Pro to Reader
Once before everytime I clicked on a pdf, it would open with Reader. Even when I told it to open WITH Acrobat pro. The IT man came and changed my windows file association via the Control Settings, I restarted and the problem was resolved. BUT now whe
-
Seems to be an extra click between slides?
Hi all, I am fairly new to Keynote, and Macs in general. I am in the middle of putting together a pretty straightforward presentation, but it is heavy on the builds. This is what I am running into: I finish with the builds and then group all of them
-
Unable to update Adobe Premier Design Suite
When I try to update my Adobe Premier Design Suite I just get a series of errors after downloading the update. Please help. Thanks, Tom Bloom [email protected]