While Executing Facing Warnnings

Hi All,
While executing mapping through control centre facing the following warnnings. How can we avoid these warnings.
Name      Status      Log
MAP_FRPDTA_F4801LA     Warning     CursorFetchMapTerminationRTV20007
MAP_FRPDTA_F4801LA     Warning     ORA-01002: fetch out of sequence
ORA-02063: preceding line from FRPDTA
MAP_FRPDTA_F4801LA     Warning     ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[IBM][iSeries Access ODBC Driver][DB2 UDB]SQL0913 - Row or object F4801LA in FRPDTA type *FILE in use.
ORA-02063: preceding 2 lines from FRPDTA
Rgds,

Hi,
Your mapping access a flat file right?
Usually, flat files is host into the same database server machine, and the parameter UTL_FILE is set to '*'.
Please confirm those questions.
Regards,
Gustavo.

Similar Messages

While executing the query in the web template I am facing below issue

Hello SAP geniuses,
Please help me on my issue ,
while executing the query in the web template i am facing below issue.
The variable for characteristic (region) is appearing but this characteristic (region) is not appearing in the free characteristic zone but when we are executing the query with out webtemplate it is showing both variable and free characteristic
can anybody help us to identify what is the issue with the web template.
Thanks
Alok

Hi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Facing a small problem while executing WDA application from portal

Hi Experts,
I developed web dynpro for ABAP application and placed table UI control, which contains 270 records. Executing from SE80, it is working fine and showing clearly all records.
This application integrated in portal, while executing this applicaiton from portal, it is working fine and showing all records.
Here I facing a small problem i.e Pager ( footer area ) of table.
When the table is displayed there are the small box in the below of the table showing ROWS 244 of 270.
244 will be available in a small box. this 244 is not showing clearly, while executing from portal ( last digit 4 displying half part only). but 244 showing clearly while executing from SE80.
Kindly suggest how to resolve this problem.
Thanks & Regards
Sridhar

Hi Gopi Krishna,
Thanks for your time. From SE80, it is working fine and showing clearly row number. There is no property for increase width of small box, which contains current row number).
Facing problem while executing from portal.
Thanks & Regards
Sridhar

Facing Problem while executing a command through WLST

Hi,
Iam using Weblogic 11g(10.3.2).Whenever I execute the below command in WLST on windows it is working fine.
reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hostname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idmhost1")
But whenever i execute the same in Linux,it is throwing the error as below:
wls:/base_domain/serverConfig> reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hoistname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idm1")
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: reassociateSecurityStore
Please suggest....
Regards
Pavan

Facing Problem while executing a command through WLST

Error while executing the WorkBook

Hi,
While executing WorkBook, I am facing an error "A critical program error has occured. The program will now terminate.Please refer to the trace for further information".
When I check in the trace, the error description is "System.NullReferenceException: Object reference not set to an instance of an object."
Can someone plese guide me on how to solve this issue !!
Thanks & Regards
Seshendra Reddy

Hi,
Make sure you have .NET framework 2.0 with latest Service Packs installed on your system. Also try and see if you will be able to run the report by having more selections for restricting the data to a minimum. This is because, BI 7, uses more memory than what BW3.5 used to use. This inturn results in some reports not to run for same selection for which we could get back result in BW3.5
Thanks,
KR
Edited by: KR on Jan 20, 2009 3:59 PM

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

I was gettiing runtime error while executing a Webdynpro-ABAP application

Hi,
I am working on Webdynpro-ABAP and created a ALV report using Service call BAPI method in IDES version. After creating component and designed view and created Webdynpro application. While executing application I am getting some error in explorer.
For any application I am getting same error.
I think some setting in explorer..I am not sure. If yes how can I rectify ?
waiting for quick response.
I am giving details error below what I faced.
Error when processing your request
What has happened?
The URL http://sapserver:8001/sap/bc/webdynpro/sap/zz_00_bapiflight was not called due to an error.
Note
     The following error text was processed in the system DM0 : Die URL enthält keine vollständige Domainangabe (sapserver statt sapserver.).
     The error occurred on the application server sapserver_DM0_01 and in the work process 0 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
     If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM0 in transaction ST22.
     If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapserver_DM0_01 in transaction SM21.
     If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapserver_DM0_01 . In some situations, you may also need to analyze the trace files of other work processes.
     If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SAPUSER -l: E -s: DM0 -i: sapserver_DM0_01 -w: 0 -d: 20091226 -t: 135942 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Best Regards,
BDP

hi
It is the Fully Qualified Domain Name (FQDN) error . Refer SAP online help :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
refer the similar thread :
Problem executing sample Webdynpro application
regards,
amit

Error while executing BEx query made on Multiprovider having Virtual cube

Hi All,
We are getting an error message while executing a BEX query made on Multiprovide which consist of a Virtual Infocube infocube which extracts data from APO Live Cache, the error which we get is as below
''Error Reading the data of the infoprovider ZSS_R054
Error in Substep
Errors have occured while extracting data from datasource 9A_E2E_FC2
Errors occured during parallel processing of query 4, RC:3
Error while reading data; navigation is possible''
And also when tried to execute from RSRT , it gets executed in debug mode in TRY and CATCHE
Please let us know if anyone faced a similar situation or can suggest me what to do.
Please suggest.
Thanking you in advance.
regards,
ajay

Hi Ajay,
Try RSRV transaction, Select All Elementary Tests, Select query, now drag both these items on the right hand pane, select your query from this popup. and execute.
Let us know what the result is.
regards,
Sree.

Error while executing the BO Dash Board

Dear Sapians
i am facing the following issues in the BO while execute the Dash Board.
But the authorization working fine in BW side . In the filter of the BO Dash Board i am getting the correct values which i was restricted in the BW side.
Please help me to solve this.
Thanks
Haji

Hi Vamsi.
The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
Can you read this note and apply solution? The note refers a patch, but the problem is the same.
After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
BR Rafael Ceolim

Error while executing the query

Hi all,
I am facing two errors while executing my query namely
1)The validity interval has initial value as lower limit.
2)Diagnosis
Query uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
System Response
Query cannot be executed in this way.
Please suggest a possible reason for these errors.
Thanks and Regards.
Mudit Khanna

Hi,
See
Refer Notes 496638,571364
210432
528202
1318741
208546
and also see simila thread
Problem getting data from BF cube in report (Non cummulative keyfigures)
Thanks
Reddy

Error while executing the Alter statement

ORA-00604: error occurred at recursive SQL level 1
ORA-01654: unable to extend index SYS.I_COL2 by 64 in tablespace SYSTEM
Im facing the above issue , while executing the Alter . Any solution on this . How to Overcome this ...

It would have been nice if you'd bothered to actually post the statement causing this error.
However, I think it is simply that you have run out of room in the system tablespace.
In which case, ask your DBA to increase the size of that tablespace.

Error while executing the sp ORA-21779: duration not active

Hi there,
am using Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 and facing typical type of error
please find the steps below to reproduce it
in this basically i will pass a comma seperated values and function will return the
piped table witheach seperated values as new record
ex :1,2,3,4
1
2
3
4
Types created:
1) Create Type TPOBJ_Return as Object (tnames varchar2 (2000));
2) Create Type TPObjT_ReturnColl as Table Of TPOBJ_ReturnTable;
Function created:
CREATE OR REPLACE FUNCTION WB_FN_ReturnTable
tNameString IN VARCHAR2
RETURN TPObjT_ReturnColl
PIPELINED
AS
iOptionSel INT;
tOptionSel VARCHAR2 (9);
iLen INT;
tName VARCHAR2 (50);
tTempChar CHAR (1);
ptNameString VARCHAR2(2000);
BEGIN
ptNameString:=tNameString;
iLen := LENGTH(TRIM(ptNameString));
iOptionSel := 1;
tName := '';
WHILE iOptionSel <= iLen
LOOP
tTempChar := SUBSTR(ptNameString, iOptionSel, 1);
IF tTempChar = ',' THEN
IF LENGTH(TRIM(tName)) > 0 THEN
PIPE ROW(TPOBJ_Return(tName));
END IF;
tName := '';
ELSE
tName := tName || tTempChar;
END IF;
iOptionSel := iOptionSel + 1;
END LOOP;
IF LENGTH(TRIM(tName)) > 0 THEN
PIPE ROW(TPOBJ_Return(tName));
END IF;
return;
END;
Table created:
Create Table test (id number(16))
Insert into test values (1)
Please insert from 1 to 10.
Stored procedure created:
Create or replace procedure Sptest
As
Titems Varchar2(255);
pvalue Number(16);
Begin
Titems :='5,4,3';
Select MIN(id) into pvalue from test where id not in
(select tnames from table(WB_FN_ReturnTable(Titems )));
End;
Note:
while executing the sp for the first time am not getting any error
only ,if making a repeated call for execution then am gettings the errors specified below
ORA-21779: duration not active
ORA-03113: end-of-file on communication channel
ORA-03114: not connected to ORACLE
can anyone help me on these issue

Why a pipeline table function? I would not say that a tokeniser function is something that typically should require working in the SQL engine, piping rows. It can be a very straight forward PL/SQL function that returns a collection of strings.
E.g.
SQL> CREATE OR REPLACE function tokenise( line varchar2, separator varchar2 DEFAULT ',' ) return TStrings AUTHID CURRENT_USER is
2 strList TStrings;
3 str varchar2(4000);
4 i integer;
5 l integer;
6
7 procedure AddString( s varchar2 ) is
8 begin
9 strList.Extend(1);
10 strList( strList.Count ) := s;
11 end;
12
13 begin
14 strList := new TStrings();
15
16 str := line;
17 loop
18 l := LENGTH( str );
19 i := INSTR( str, separator );
20
21 if i = 0 then
22 AddString( str );
23 else
24 AddString( SUBSTR( str, 1, i-1 ) );
25 str := SUBSTR( str, i+1 );
26 end if;
27
28 -- if the separator was on the last char of the line, there is
29 -- a trailing null column which we need to add manually
30 if i = l then
31 AddString( null );
32 end if;
33
34 exit when str is NULL;
35 exit when i = 0;
36 end loop;
37
38 return( strList );
39 end;
40 /
Function created.
SQL>
SQL> select * from TABLE(Tokenise('col1,col2,col3,,col5,and so on'));
COLUMN_VALUE
col1
col2
col3
col5
and so on
6 rows selected.
SQL>
PS. The TStrings SQL user type is declared as a table of varchar2(4000).

Error while executing the workbook query.

Hi guyz
i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
we re-transported the queries but still we are facing the same problem.
while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
" NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
could someone please tell me where we went wrong and why we are getting this error.
Regards,
Anil Vadde

Hey ,I think data load to your target on which the query was based had some issue.
Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
Regards,
RK

Authorization issue while executing a Web Template in SAP BI

Hello All,
I am facing an issue while executing a webtemplate .
I have a webtemplate which is being executed by end user, upon execution user must be able to fill in the value for data and submit. The query uses a characteristic KPI identifier ,SBU,BU,product, Region,Affiliate etc . All the mentioned charcaterisitics in Analysis authorization have * value except KPI identifier and SBU. And Activity 02,03 is provided for the infoprovider.
When a single value (Ex:KPI01) is provided in KPI identifier the webtemplate works fine in change mode. But when additonal value (Ex KPI02) is being added to the characterstic KPI identifier the webtemplate opens only in display mode. There is no authorization failure as well in the RSEC trace.
Actually we created two separate roles for each KPI identifier earlier but when two roles provided to a user in combination it was behaving the way i mentioned above. So we tried to create a single role with two values of KPI Identifier in single analysis authorization and it is still the same.
Please suggest what might be the reason for this behavior. Thank you
Regards,
Mohammed Ghouse

Hi Brian,
Thanks for your reply
RSECADMIN does not show any missing authorizations when checked , but what is observed is that the check happens only on display
These are the characteristics being checked by the query
Characteristic      Content in SQL format
OTCACTVT         GRI_IC005 IN ('KPI054','KPI055')
GRI_IC005          AND GRI_IC007 = 'MFE'
                            AND 0TCAACTVT = '02'
GRI_IC007
Comparison with Following Authorized Set
Characteristic      Content in SQL format
0TCAACTVT      I CP *
GRI_IC005        I EQ KPI054
                           I EQ KPI055
GRI_IC007          I EQ MFE
And it says its authorized. But still the screen is in display mode. What might be the reason for this behavior.

While Executing Facing Warnnings

Similar Messages

Maybe you are looking for