While executing T.code F.5D system give"doc splitting is active in compcode
Dear Team,
We are in ECC 6.0 and we have our business area wise balance sheet active and for some Business areas, balance sheet are not matching because of Non updation of business area in Tax line item for which we had configured OBXM settings correctly.
While executing F.5D, F.5E system throws an message "Document splitting is active for company code XXXX".
In order to execute these transactions how can i move ahead?
Please reply its needed.
Thanks & regards,
Sandeep Jain
hi sandeep,
The system must have 'document split' functionality activated.
Document split functionality replaced SAPF180* programs, so these
programs are not allowed to be executed for doc-split active company
code.
For more information about the NewGL and document splitting, please
have a look to the added notes 826357 and 741821.
If you decide not to use document splitting functionality, you may
turn it off at IMG:Activate Document Splitting. Here, you can also
deactivate the functionality per company code.
Reg
Madhu M
Similar Messages
-
System is asking for password while executing t.code RSUDO
Hi
While executing t.code RSUDO ( Execute as user with restricted authorizations) on behalf of other user, system is asking for password.
Can you tell the reason for it?
System is BW 731.
Thanks
SaurabhHi
I had the same problem.
What solved it for me was to add authorizations in PFCG for one of my roles
The autorisation is : "Execution of transaction RSUDO without password"
Heres what I added in PFCG:
Authorization obj: R_SEC
RSECADMOBJ: RSUDO
RSECADMVAL: *
ACTVT: 16
Hope it will solved your problem.
Robin -
Client not modifiable message while executing t-code ops7 and ops6
Hi Guru's,
I am getting "Client not modifiable message while executing t-code ops7 and ops6" in Unit test and Quality client.
Pleae help me to resolve the error.
Regards
Sasikanth ReddyHi
Copy of the information I found regarding this issue:
It is possible to allow the maintenance of 'Customizing'-tables in a
production client, even if the client is set to 'not modifiable'.
Normally this should be the case for tables TCJ04 (responsible person)
and TCJ05 (applicant).
Please could you check the settings in your system and change it if
necessary:
Transaction SE11:
Table TCJ04: delivery class should be set to 'C'
TCJ05: delivery class should be set to 'C'
Transaction SOBJ -> Maintain
Position on V_TCJ04: Category should be 'CUST' field 'current settings'
should be marked.
Position on V_TCJ05: Category should be 'CUST' field 'current settings'
Please also check that your client is defined as 'PRODUCTIVE' via
transaction SCC4 (field client role).
I would also recommend that you review the attached notes with reference
to the usage of customizing setting "current settings": Nr. 77430,
Nr. 135028, Nr. 356483. These are also relevant for your release.
Kind regards,
Zhenbo -
Errror while executing transaction code ME23N
hi,
Errror occurs while executing the transaction code ME23N
error message as follows:-
YOU ARE NOT AUTHORISED TO EXECUTE PROGRAM SAPLMEPO
PLEASE SUGGEST SOME SOLUTIONS TO IT.Hi,
Execute transaction ME23N. WHen you will get message for no authorization, enter /nSU53 in command field. System will display missing authorisation object frm your roles. Give this authorisation object along with values (or provide screeprint) to security person. He/ she may provide you required authorisation. -
Problem While Executing T.CODE DP90
Hi,
We have Upgrade our system from 4.6C to ECC6.
We are facing following problem while executing Resource Related Billing request
Through Transaction code DP90.
Process.
1. We are creating Sales Order and system will create Service order automatically as per the configuration.
2. In service order we have External as well internal operations ,
Internal operations will be confirmed through IW41, and External Operations we are creating Purchase Requisition then creating PO and MIRO,
After all Operations confirmed we will make Service order status as technically completed, then we are executing DP90 for Resource Related Billing, System will determine the material, combination of Cost element and Activity Type (Which is configured in T.Code ODP1) For External Operations System is Considering Activity Type for material determination in 4.6c but it is not considering Activity Type for Material Determination in ECC6 for External Operations.
Please Help me,
Edited by: D B on Apr 29, 2008 6:13 PMHi Prashanth,
Thanks for your reply, but all activity are valid in current period, in our Scenario in the old system for External Operations with combination of Activity type and Cost element system is determining material but where as in the new system for external operations it is not considering the Activity type and system is determining the material in the combination of Cost element and Blank activity type so, we are getting different material in DP90. -
FJS-00012 ERROR while executing script in start SAP system
Hi experts,
I am getting error in the Oracle preload actions while installing the SAP 4.7 using the ORacle 9.2.0.1..
FJS-00012 Error when executing script in start SAP system(post processing)
My comp configuration is as follows:
160 gb hard disk
RAM 1GB
OS: win 2003 server enterprise edition
oracle 8.1.7
During the Database Load (post processing) section of the
installation, i get an error and the installation fails.
I am giving all the logs here including the trace log and the
Sapview.log file ans sapinst.
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: START OF LOG: 20070511002459
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ESA\SYS\exe\run/R3load.exe -ctf I E:\db3\EXPORT3/DATA/SAPVIEW.STR C:\SAPinst ORACLE KERNEL/DDLORA.TPL C:\SAPinst ORACLE KERNEL/SAPVIEW.TSK ORA -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -o D
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: END OF LOG: 20070511002500
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: START OF LOG: 20070511070423
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ESA\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPESA's password
DbSl Trace: Connecting as /@ESA on connection 0 ...
DbSl Trace: Attaching to DB Server ESA (con_hdl=0,svchp=002BD418,svrhp=002BD224)
DbSl Trace: Starting user session (con_hdl=0,svchp=002BD418,srvhp=002BD224,usrhp=00304E94)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=002BD418,usrhp=00304E94)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPESA/<pwd>@ESA on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=002BD418,srvhp=002BD224,usrhp=00304E94)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance esa is running on MALTI with ORACLE version 8.1.7.4.1 since 20070511
(DB) INFO: connected to DB
(DB) INFO: /SAPTRX/A_CONDF4 created
(DB) INFO: /SAPTRX/VDASFEV created
(DB) INFO: /SAPTRX/VDASFPAR created
(DB) INFO: /SAPTRX/VD_AOMIL created
(DB) INFO: /SAPTRX/VD_AOPAC created
(DB) INFO: /SAPTRX/VD_AOPAE created
(DB) INFO: /SAPTRX/VD_AOPAI created
(DB) INFO: /SAPTRX/VD_AOPAR created
(DB) INFO: /SAPTRX/VD_AOTD1 created
(DB) INFO: /SAPTRX/VD_AOTD2 created
(DB) INFO: /SAPTRX/VD_AOTDD created
(DB) INFO: /SAPTRX/VD_AOTYP created
(DB) INFO: /SAPTRX/VD_ASPAR created
(DB) INFO: /SAPTRX/VD_CONDL created
(DB) INFO: /SAPTRX/V_AODD02 created
(DB) INFO: /SAPTRX/V_DD03 created
(DB) INFO: /SAPTRX/V_DD03X created
(DB) INFO: /SDF/SMODICOMP created
(DB) INFO: /SDF/SMODIDEVC created
(DB) INFO: /SDF/UMOD_COMP created
(DB) INFO: ACEPSOIT_UPD created
(DB) INFO: ADJV_TRANS_DIF created
(DB) INFO: AFFWV0 created
(DB) INFO: AFKO_LAUFN created
(DB) INFO: AFSPLIT created
(DB) INFO: AFVCP created
(DB) INFO: ALM_ME_T003O_IS created
(DB) INFO: ALM_ME_T350I created
(DB) INFO: ALM_ME_TQ80_T created
(DB) INFO: ANEKPV created
(DB) INFO: APOUPD created
(DB) INFO: APPL_DEVC created
(DB) INFO: APPL_DIAL created
(DB) INFO: APPL_DOMA created
(DB) INFO: APPL_DTEL created
(DB) INFO: APPL_ENQU created
(DB) INFO: APPL_FUGR created
(DB) INFO: APPL_FUGRG created
(DB) INFO: APPL_FUNC created
(DB) INFO: APPL_INDX created
(DB) INFO: APPL_MCOB created
(DB) INFO: APPL_MENU created
(DB) ERROR: DDL statement failed
(CREATE VIEW "APPL_MODS" ( "NAME" , "TYP" , "MEMBER" , "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X')
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=002BD418,usrhp=00304E94)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=002BD418,srvhp=002BD224)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: END OF LOG: 20070511070433
SAPINST
INFO 2007-05-10 23:59:05
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2007-05-10 23:59:16
The 'saploc' share exists at directory 'D:\usr\sap'. Choosing drive D: as SAP System drive.
INFO 2007-05-10 23:59:21
Copying file E:/KERNEL/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
INFO 2007-05-10 23:59:21
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
INFO 2007-05-11 00:01:52
Copying file E:/db1/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2007-05-11 00:01:52
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.XML.
INFO 2007-05-11 00:01:52
Copying file system node E:\db1\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
INFO 2007-05-11 00:01:52
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-05-11 00:01:52
Copying file E:/db1/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2007-05-11 00:01:52
Creating file C:\SAPinst ORACLE KERNEL\DDLORA.TPL.
INFO 2007-05-11 00:01:52
Copying file system node E:\db1\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
INFO 2007-05-11 00:01:52
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-05-11 00:01:57
Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2007-05-11 00:01:57
Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2007-05-11 00:01:57
Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2007-05-11 00:03:00
Package table created
PHASE 2007-05-11 00:04:15
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2007-05-11 00:04:15
SAP Web Application Server
PHASE 2007-05-11 00:04:15
Request common parameters of SAP System
PHASE 2007-05-11 00:04:15
Create operating system accounts
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.1.xml.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\keydb.1.xml.
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.xml to: C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.1.xml.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.1.xml.
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.1.XML.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.1.XML.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1004 ACCOUNTNAME=malti\SAP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1005 ACCOUNTNAME=malti\SAP_ESA_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1006 ACCOUNTNAME=malti\SAP_ESA_GlobalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Global Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1007 ACCOUNTNAME=ORA_ESA_DBA ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Operator Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1008 ACCOUNTNAME=ORA_ESA_OPER ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
INFO 2007-05-11 00:04:18
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1009 ACCOUNTNAME=malti\esaadm ACCOUNTTYPE=USER DESCRIPTION=SAP System Administrator MEMBERSHIP=malti\SAP_ESA_GlobalAdmin,malti\Users,Administrators,ORA_ESA_DBA,ORA_ESA_OPER,malti\SAP_LocalAdmin,malti\SAP_ESA_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-05-11 00:04:18
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1010 ACCOUNTNAME=malti\SAPServiceESA ACCOUNTTYPE=USER CONDITION=YES DESCRIPTION=SAP System Service Administrator MEMBERSHIP=malti\SAP_ESA_GlobalAdmin,Administrators,ORA_ESA_DBA,ORA_ESA_OPER,malti\SAP_LocalAdmin,malti\SAP_ESA_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-05-11 00:04:18
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
INFO 2007-05-11 00:04:21
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-05-11 00:04:22
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa_16 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata1\esa620_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata1\esa620_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata2\esa620_2.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata2\esa620_2 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata3\esa620_3.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata3\esa620_3 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata4\esa620_4.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata4\esa620_4 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata4\esa620_5.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata4\esa620_5 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata5\esa620_6.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata5\esa620_6 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata5\esa620_7.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata5\esa620_7 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esa620_8.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa620_8 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esa620_9.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa620_9 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esausr_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esausr_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata2\roll_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata3\temp_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata1\system_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-05-11 00:05:40
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-05-11 00:05:40
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-05-11 00:05:41
Creating file D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:05:42
Creating file D:\oracle\ora81\database\initESA.sap.
INFO 2007-05-11 00:05:43
Copying file E:/KERNEL/NT/COMMON/INSTALL/INITSID.DBA to: D:\oracle\ora81/database/initESA.dba.
INFO 2007-05-11 00:05:43
Creating file D:\oracle\ora81\database\initESA.dba.
INFO 2007-05-11 00:05:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:05:45
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:05:45
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:05:45
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:05:46
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2007-05-11 00:05:51
See 'D:\oracle\ora81/bin/oradim -new -sid ESA -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2007-05-11 00:05:51
'D:\oracle\ora81/bin/oradim -new -sid ESA -STARTMODE auto' returned with '0'.
INFO 2007-05-11 00:05:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:05:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:31
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:07:31
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:07:31
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:07:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:09:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:09:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:15
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:53
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:14:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:14:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:11
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:16:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:16:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:18:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:18:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:20:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:20:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:22:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:22:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:47
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:15
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:46
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:24:46
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:24:46
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:24:46
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-05-11 00:24:47
See 'D:\oracle\ora81/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-05-11 00:24:47
'D:\oracle\ora81/bin/lsnrctl stat' returned with '3'.
INFO 2007-05-11 00:24:47
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-05-11 00:24:48
See 'D:\oracle\ora81/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-05-11 00:24:48
'D:\oracle\ora81/bin/lsnrctl start' returned with '0'.
INFO 2007-05-11 00:24:49
Copying file E:/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2007-05-11 00:24:49
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2007-05-11 00:24:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
PHASE 2007-05-11 00:24:54
Database Load
INFO 2007-05-11 00:24:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:00
Task files created
INFO 2007-05-11 00:25:00
Command files created
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 02:18:03
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL1.log
INFO 2007-05-11 02:18:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 02:44:07
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX2.log
INFO 2007-05-11 02:44:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 03:55:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:25:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:42:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:47:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:55:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:57:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:59:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:01:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:03:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:04:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:05:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 07:04:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 07:04:33
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2007-05-11 07:04:33
FJS-00012 Error when executing script.
THANKS ALLL IN ADVANCE,
Regards,
Maltino space left on devices...
==> "<b>MOS-01109 Needed space on mountpoint F:/ is 5.248e07 KB, but got only 4.26433e07 KB.</b>"
and others...
-> provide more space and restart
GreetZ, AH -
Java run time error while executing JavaFX code
Hi
I copied the code from [http://java.sun.com/javafx/1/tutorials/ui/overview/UIControls.fx|http://java.sun.com/javafx/1/tutorials/ui/overview/UIControls.fx] while
reading in [http://java.sun.com/javafx/1/tutorials/ui/overview/#controls|http://java.sun.com/javafx/1/tutorials/ui/overview/#controls] tutorial and paste it to my
netbeans editor but i got following error.
init:
deps-jar:
compile:
jar:
standard-run:
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d94513f, pid=5152, tid=5996
# Java VM: Java HotSpot(TM) Client VM (1.6.0_03-b05 mixed mode, sharing)
# Problematic frame:
# V [jvm.dll+0xd513f]
# An error report file with more information is saved as hs_err_pid5152.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
BUILD FAILED (total time: 18 seconds)can anyone tell whether its netbeans fault or javaFX. I am using netbeans 6.5.1 on windows vista. I have added following plugin in netbeans for javaFX
*JavaFX Kit
*JavaFX SDK for Windows
is anyone also getting this error for this code and have solution for this.You are correct the crash is causing due to ToggleButton and ProgessBar. the code is correct because i tried it on eclipse 3.4 and it worked fine.This is definitely netbeans error. because its giving error even if u try to execute javafx code with just one ToggleButton or ProgressBar. I tried the following simple code in netbeans 6.5
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.control.ToggleButton;
import javafx.scene.control.ProgressBar;
var toggle=ToggleButton {
translateX:50
translateY:50
text: "First"
width:100
height:20
var progress= ProgressBar {
progress: bind ProgressBar.computeProgress( 100, 30 )
Stage {
title : "Toggle Button Test"
scene: Scene {
width: 200
height: 200
content: [ toggle
} When i just added toggle button to contents then button showed up in window but on clicking it window disappear and compiler gave crash error on the other hand when i added just progess bar it just throws the error.The same code is running fine on eclipse
Is there any workaround in netbeans for this if its a bug and if not what should i do to correct it. -
TSV_TNEW_PAGE_ALLOC_FAILED in Bw server,while execut t.code RSRT(netwear 7.3)
Dear experts,
when i execute T.code:RSRT, i get error like a no more more available in extend memory.In T.code: Db02 shows ()
1) An exception with the type CX_SY_STRUCT_COMP_NAMEoccurred, but was neither handled locally, nor declared in a RAISING clause
2) Wrong number of input parameters [GET_INPUT_STRUCT].
In t.code:st22
TSV_TNEW_PAGE_ALLOC_FAILED
TSV_TABH_POOL_NO_ROLL_MEMORY
Please help to slove
Regards,
Prabaharan BHi,
You need to increase the abap heap limits on the system.
Please check the following Notes which describe this issue :
020527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
1260912 - Memory overflow note: Dump TSV_TNEW_PAGE_ALLOC_FAILED
1387739 - Out of memory errors during shadow system operation
Thanks,
Bhavin Vyas -
System allow GR for a material without profit center maintained it it while Doc. splitting is active
Dears,
My client in the Go-live phase and there is an issue related to GR a material without having a profit center in it's master data, the system allow receipt 100 PC and when reversing the GR from MIGO the system display the error "Balancing in profit center is not filled" !!
so when we try to maintain a profit center in the material master data the system display error that the material already has a balance Q!
i mean why is the system allow the GR to happened if the material does not have a profit center
Note: i checked the configuration for Doc splitting and it's already maintained in the right way !.
Thanks and best regards,
Ahmed SamirHi,
When GR is happens document splitting has not activated????
Regd,
Khan. -
ABAP runtime error while executing T.code : PC00_M40_CALC
Hi,
I have applied SAP note 1568264 - Budget Changes 2011 as released by
SAP and i also applied the pre-requiste SAP notes mentioned in the
above SAP note
1) SAP Note 1558475- Amendments to IT calculation notified under
circular:08/2010.
2) SAP Note 1572614- Tax calculations inconsistent for emp. without a
vaild PAN.
3) SAP Note 1575366- HINCALC0:Tax calculation inconsistent in case of
invalid PAN.
After applying the SAP notes, when i am trying to execute the T.Code :
PC00_M40_CALC, i am getting an "Abap runtime error"
" Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "HINCALC0 " in include "PCTAXIN0
" in
line 905:
""ENDUZ-" expected, not "EDU_""
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "S2K_BASIS "
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed. "
Kindly suggest me what has to be done on priority basis.
Regards
VishThe dump error is generally encountered if your system is at a lower Support Pack level. For implementing Note 1568264 (Budget Changes 2011), you need to be at the below mentioned pre-requisite level corresponding to your Release:
Prerequisites:
Release Support Package
604 HRSP29
600 HRSP63
500 HRSP80
470 HRSPB4
46C HRSPG9
The correct sequence to implement the Notes is:
SAP Note 1558475- Amendments to IT calculation notified under
circular:08/2010.
SAP Note 1572614- Tax calculations inconsistent for emp. without a
vaild PAN.
SAP Note 1575366- HINCALC0:Tax calculation inconsistent in case of
invalid PAN.
SAP Note 1568264- Budget Changes 2011
This should solve the issue unless there is some problem while implementing the Notes.
Regards,
Nishtha -
Problem while executing the code( that covert jpeg images to movie)
http://java.sun.com/products/java-media/jmf/2.1.1/solutions/JpegImagesToMovie.html
here is the code:
* @(#)JpegImagesToMovie.java 1.3 01/03/13
* Copyright (c) 1999-2001 Sun Microsystems, Inc. All Rights Reserved.
* Sun grants you ("Licensee") a non-exclusive, royalty free, license to use,
* modify and redistribute this software in source and binary code form,
* provided that i) this copyright notice and license appear on all copies of
* the software; and ii) Licensee does not utilize the software in a manner
* which is disparaging to Sun.
* This software is provided "AS IS," without a warranty of any kind. ALL
* EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
* IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
* NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE
* LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
* OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS
* LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT,
* INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF
* OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
* This software is not designed or intended for use in on-line control of
* aircraft, air traffic, aircraft navigation or aircraft communications; or in
* the design, construction, operation or maintenance of any nuclear
* facility. Licensee represents and warrants that it will not use or
* redistribute the Software for such purposes.
import java.io.*;
import java.util.*;
import java.awt.Dimension;
import javax.media.*;
import javax.media.control.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.datasink.*;
import javax.media.format.VideoFormat;
* This program takes a list of JPEG image files and convert them into
* a QuickTime movie.
public class JpegImagesToMovie3 implements ControllerListener, DataSinkListener {
public boolean doIt(int width, int height, int frameRate, Vector inFiles, MediaLocator outML) {
ImageDataSource ids = new ImageDataSource(width, height, frameRate, inFiles);
Processor p;
try {
System.err.println("- create processor for the image datasource ...");
p = Manager.createProcessor(ids);
} catch (Exception e) {
System.err.println("Yikes! Cannot create a processor from the data source.");
return false;
p.addControllerListener(this);
// Put the Processor into configured state so we can set
// some processing options on the processor.
p.configure();
if (!waitForState(p, p.Configured)) {
System.err.println("Failed to configure the processor.");
return false;
// Set the output content descriptor to QuickTime.
p.setContentDescriptor(new ContentDescriptor(FileTypeDescriptor.QUICKTIME));
// Query for the processor for supported formats.
// Then set it on the processor.
TrackControl tcs[] = p.getTrackControls();
Format f[] = tcs[0].getSupportedFormats();
if (f == null || f.length <= 0) {
System.err.println("The mux does not support the input format: " + tcs[0].getFormat());
return false;
tcs[0].setFormat(f[0]);
System.err.println("Setting the track format to: " + f[0]);
// We are done with programming the processor. Let's just
// realize it.
p.realize();
if (!waitForState(p, p.Realized)) {
System.err.println("Failed to realize the processor.");
return false;
// Now, we'll need to create a DataSink.
DataSink dsink;
if ((dsink = createDataSink(p, outML)) == null) {
System.err.println("Failed to create a DataSink for the given output MediaLocator: " + outML);
return false;
dsink.addDataSinkListener(this);
fileDone = false;
System.err.println("start processing...");
// OK, we can now start the actual transcoding.
try {
p.start();
dsink.start();
} catch (IOException e) {
System.err.println("IO error during processing");
return false;
// Wait for EndOfStream event.
waitForFileDone();
// Cleanup.
try {
dsink.close();
} catch (Exception e) {}
p.removeControllerListener(this);
System.err.println("...done processing.");
return true;
* Create the DataSink.
DataSink createDataSink(Processor p, MediaLocator outML) {
DataSource ds;
if ((ds = p.getDataOutput()) == null) {
System.err.println("Something is really wrong: the processor does not have an output DataSource");
return null;
DataSink dsink;
try {
System.err.println("- create DataSink for: " + outML);
dsink = Manager.createDataSink(ds, outML);
dsink.open();
} catch (Exception e) {
System.err.println("Cannot create the DataSink: " + e);
return null;
return dsink;
Object waitSync = new Object();
boolean stateTransitionOK = true;
* Block until the processor has transitioned to the given state.
* Return false if the transition failed.
boolean waitForState(Processor p, int state) {
synchronized (waitSync) {
try {
while (p.getState() < state && stateTransitionOK)
waitSync.wait();
} catch (Exception e) {}
return stateTransitionOK;
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
evt.getSourceController().stop();
evt.getSourceController().close();
Object waitFileSync = new Object();
boolean fileDone = false;
boolean fileSuccess = true;
* Block until file writing is done.
boolean waitForFileDone() {
synchronized (waitFileSync) {
try {
while (!fileDone)
waitFileSync.wait();
} catch (Exception e) {}
return fileSuccess;
* Event handler for the file writer.
public void dataSinkUpdate(DataSinkEvent evt) {
if (evt instanceof EndOfStreamEvent) {
synchronized (waitFileSync) {
fileDone = true;
waitFileSync.notifyAll();
} else if (evt instanceof DataSinkErrorEvent) {
synchronized (waitFileSync) {
fileDone = true;
fileSuccess = false;
waitFileSync.notifyAll();
public static void main(String args[]) {
if (args.length == 0)
prUsage();
// Parse the arguments.
int i = 0;
int width = -1, height = -1, frameRate = 1;
Vector inputFiles = new Vector();
String outputURL = null;
while (i < args.length) {
if (args.equals("-w")) {
i++;
if (i >= args.length)
prUsage();
width = new Integer(args[i]).intValue();
} else if (args[i].equals("-h")) {
i++;
if (i >= args.length)
prUsage();
height = new Integer(args[i]).intValue();
} else if (args[i].equals("-f")) {
i++;
if (i >= args.length)
prUsage();
frameRate = new Integer(args[i]).intValue();
} else if (args[i].equals("-o")) {
i++;
if (i >= args.length)
prUsage();
outputURL = args[i];
} else {
inputFiles.addElement(args[i]);
i++;
if (outputURL == null || inputFiles.size() == 0)
prUsage();
// Check for output file extension.
if (!outputURL.endsWith(".mov") && !outputURL.endsWith(".MOV")) {
System.err.println("The output file extension should end with a .mov extension");
prUsage();
if (width < 0 || height < 0) {
System.err.println("Please specify the correct image size.");
prUsage();
// Check the frame rate.
if (frameRate < 1)
frameRate = 1;
// Generate the output media locators.
MediaLocator oml;
if ((oml = createMediaLocator(outputURL)) == null) {
System.err.println("Cannot build media locator from: " + outputURL);
System.exit(0);
JpegImagesToMovie3 imageToMovie3 = new JpegImagesToMovie3();
imageToMovie3.doIt(width, height, frameRate, inputFiles, oml);
System.exit(0);
static void prUsage() {
System.err.println("Usage: java JpegImagesToMovie -w <width> -h <height> -f <frame rate> -o <output URL> <input JPEG file 1> <input JPEG file 2> ...");
System.exit(-1);
* Create a media locator from the given string.
static MediaLocator createMediaLocator(String url) {
MediaLocator ml;
if (url.indexOf(":") > 0 && (ml = new MediaLocator(url)) != null)
return ml;
if (url.startsWith(File.separator)) {
if ((ml = new MediaLocator("file:" + url)) != null)
return ml;
} else {
String file = "file:" + System.getProperty("user.dir") + File.separator + url;
if ((ml = new MediaLocator(file)) != null)
return ml;
return null;
// Inner classes.
* A DataSource to read from a list of JPEG image files and
* turn that into a stream of JMF buffers.
* The DataSource is not seekable or positionable.
class ImageDataSource extends PullBufferDataSource {
ImageSourceStream streams[];
ImageDataSource(int width, int height, int frameRate, Vector images) {
streams = new ImageSourceStream[1];
streams[0] = new ImageSourceStream(width, height, frameRate, images);
public void setLocator(MediaLocator source) {
public MediaLocator getLocator() {
return null;
* Content type is of RAW since we are sending buffers of video
* frames without a container format.
public String getContentType() {
return ContentDescriptor.RAW;
public void connect() {
public void disconnect() {
public void start() {
public void stop() {
* Return the ImageSourceStreams.
public PullBufferStream[] getStreams() {
return streams;
* We could have derived the duration from the number of
* frames and frame rate. But for the purpose of this program,
* it's not necessary.
public Time getDuration() {
return DURATION_UNKNOWN;
public Object[] getControls() {
return new Object[0];
public Object getControl(String type) {
return null;
* The source stream to go along with ImageDataSource.
class ImageSourceStream implements PullBufferStream {
Vector images;
int width, height;
VideoFormat format;
int nextImage = 0; // index of the next image to be read.
boolean ended = false;
public ImageSourceStream(int width, int height, int frameRate, Vector images) {
this.width = width;
this.height = height;
this.images = images;
format = new VideoFormat(VideoFormat.JPEG,
new Dimension(width, height),
Format.NOT_SPECIFIED,
Format.byteArray,
(float)frameRate);
* We should never need to block assuming data are read from files.
public boolean willReadBlock() {
return false;
* This is called from the Processor to read a frame worth
* of video data.
public void read(Buffer buf) throws IOException {
// Check if we've finished all the frames.
if (nextImage >= images.size()) {
// We are done. Set EndOfMedia.
System.err.println("Done reading all images.");
buf.setEOM(true);
buf.setOffset(0);
buf.setLength(0);
ended = true;
return;
String imageFile = (String)images.elementAt(nextImage);
nextImage++;
System.err.println(" - reading image file: " + imageFile);
// Open a random access file for the next image.
RandomAccessFile raFile;
raFile = new RandomAccessFile(imageFile, "r");
byte data[] = null;
// Check the input buffer type & size.
if (buf.getData() instanceof byte[])
data = (byte[])buf.getData();
// Check to see the given buffer is big enough for the frame.
if (data == null || data.length < raFile.length()) {
data = new byte[(int)raFile.length()];
buf.setData(data);
// Read the entire JPEG image from the file.
raFile.readFully(data, 0, (int)raFile.length());
System.err.println(" read " + raFile.length() + " bytes.");
buf.setOffset(0);
buf.setLength((int)raFile.length());
buf.setFormat(format);
buf.setFlags(buf.getFlags() | buf.FLAG_KEY_FRAME);
// Close the random access file.
raFile.close();
* Return the format of each video frame. That will be JPEG.
public Format getFormat() {
return format;
public ContentDescriptor getContentDescriptor() {
return new ContentDescriptor(ContentDescriptor.RAW);
public long getContentLength() {
return 0;
public boolean endOfStream() {
return ended;
public Object[] getControls() {
return new Object[0];
public Object getControl(String type) {
return null;
on executing with the command:
java JpegImagesToMovie -w <width> -h <height> -f <frame rate per sec.> -o <output URL> <input JPEG file 1> <input JPEG file 2> ...
comes this......
Exception in thread"JMF thread:SendEventQueue:com.sun.media.processor.unknown Handler" java.lang.NullPointerException"
plz helpDon't forget to use the "Code Formatting Tags",
see http://forum.java.sun.com/help.jspa?sec=formatting,
so the posted code retains its original formatting. -
Java Runtime crash while executing native code.(version 1.6.0_10-beta)
HI all
i observed a crash while execution a native fuction , which is initializing an
char array of size (1024*1024).Plz see the code snippet below:
But it is working with java version: 1.5.0
FileTest.c:
#include<stdio.h>
#include<fcntl.h>
#include<string.h>
#include<stdlib.h>
#include "HelloWorld.h"
JNIEXPORT jint JNICALL Java_HelloWorld_CreateLargestF<div style="direction: ltr">ile (JNIEnv * env, jclass obj)
//int CreateLargestFile(char* filename)
char *filename = "LargestFile.tmp";
int fd = creat(filename, 0666);
if(fd == -1)
return 0;
int size = 1024 * 1024;
char buffer[size];
//buffer is not filled fully, JRE aborts after i reaches to 61327 approx.
int i;
for( i = 0;i<size;i++)
buffer[i] = 'a';
printf("\n\n==>> Executing FSTLD0001 : buffer %d = %c \n",i,buffer);
printf("\n\n==>> Executing FSTLD0001 : after init\n");
//memset(buffer, 'a', size);
while(1)
long bytes = write(fd, buffer, size);
if(bytes < size)
break;
close(fd);
return 1;
HelloWorld.java
public class HelloWorld {
public static native int CreateLargestFile();
public static void main(String[] args)
String dir = System.getProperty("user.dir");
String libpath = dir + "/libFileTest.so";
System.load(libpath);
CreateLargestFile();
jni.h version used is: 1.56 03/12/19
jni_md.h version used is : 1.14 03/12/19
FULL PRODUCT VERSION :
java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b14)
Java HotSpot(TM) Client VM (11.0-b11 mixed mode, sharing)
FULL OS VERSION :
Linux debian 2.6.18-6-686 #1 SMP Sun Feb 10 22:11:31 UTC 2008 i686 GNU/Linux
ERROR MESSAGES:
# An unexpected error has been detected by Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xb7eec667, pid=7128, tid=3084340144
# Java VM: Java HotSpot(TM) Client VM (11.0-b11 mixed mode, sharing linux-x86)
# Problematic frame:
# C [libFileTest.so+0x667] Java_HelloWorld_CreateLargestFile+0x8b
<div style="direction: ltr">#
# If you would like to submit a bug report, please visit:
# [http://java.sun.com/webapps/bugreport/crash.jsp]
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.</div>
May i have any feedbacks or help?
Thanks
</div>Stack size perhaps?
Allocate the buffer off the heap instead of the stack.
The following might be related (might not as well.)
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6227033
There is a flag that adds info for jni via the command line turn it on. -
Error while executing the code as sys user
Hi,
Below is the code that creates a procedure. Though the proc gets created successfully, while trying to execute it, I get the below error
ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_SESSION", line 101
ORA-06512: at "SYS.MY_TEST_PROC", line 20
ORA-06512: at line 1
The proc is created by sys and executed by sys too
create or replace procedure my_test_proc as
TYPE CUR1 IS REF CURSOR;
CURSOR c1 is
select ename from SCOTT.emp where rownum <2;
v_name varchar2(30);
MY_CUR CUR1;
STRQRY VARCHAR2(2000);
L_PARAM DBMS_SQL.VARCHAR2S;
CNT NUMBER;
V_DATA SCOTT.EMP%ROWTYPE;
BEGIN
STRQRY := 'SELECT * FROM SCOTT.EMP WHERE 1 =1 and (( 1= 1) ';
CNT := 0;
open c1;
loop
fetch c1 into v_name;
exit when c1%notfound;
CNT := CNT + 1;
dbms_session.set_context('MY_CTX','ENAME_' || CNT, V_NAME);
STRQRY := STRQRY || ' OR (ENAME = SYS_CONTEXT(''MY_CTX'',''ENAME_1'')';
end loop;
DBMS_OUTPUT.PUT_LINE(STRQRY || ')');
CLOSE C1;
END my_test_proc;
============================================================
EXEC my_test_proc;
Please help.>
STRQRY := 'SELECT * FROM SCOTT.EMP WHERE 1 =1 and (( 1= 1) ';
>
The above query won't work because there is a syntax error.
Count the numbers of left and right parentheses.
Edit your post and use code tags and tell us which is line #20.
My guess is that it is this line
dbms_session.set_context('MY_CTX','ENAME_' || CNT, V_NAME); You don't show any code for the CONTEXT procedure. DBMS_SESSION.SET_CONTEXT in the PL/SQL Packages and Types doc
See http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_sessio.htm#i1010942
>
The caller of SET_CONTEXT must be in the calling stack of a procedure that has been associated to the context namespace through a CREATE CONTEXT statement. The checking of the calling stack does not cross a DBMS boundary. -
Runtime error while executing t-code NWP1
Hi!
One of our users is getting the runtime error CONVT_NO_NUMBER when she tries to execute the t-code NWP1. This is only with this user whereas her colleagues are able to execute it without any issues. Her decimal notation value in her UMR is specified as 1234,567.89, I changed it to other settings but still no luck. Does it have anything to do with her user parameters because this issue is only for this one user. Please help and thank you very much in advance
Regards,
AjDid you compare her user with another one that is working properly?....
Does it have anything to do with her user parameters because this issue is only for this one user
Most likely, that's way I suggest to compare the user... also you can try recreating the user to see if theres something wrong with her user master record.
Regards
Juan -
Is it possible to ignore some events, while executing some code?
The problem is following: imagine the interface, consisting of three buttons - start, stop, save and one graph indicator. When one press start button some sequence of events is fired, and some data is shown on the graph (this sequence can be prolonged in time for a few hours). After completion of sequence one can save data. All is good except one thing: what will happen if start button have been pressed while execution? Start sequence will be fired again and previously acquired data will be lost. So the question is following: is it possible to erase (or ignore) some events from events stack?
Locking front panel is not good idea, because some other controls (for example stop) might be needed.
Making start
button disabled and grayed out is not good idea because user can click on that button (thus generate events) a lot of times before the disabling will occur.
Creation of data buffer for storing graphs is not good idea as well because it do not solves the problem.
www.xinstruments.com
Custom Software for Industrial Automation
www.hdrconverter.com
Picture processing made easyIn newer version of LabVIEW, you can use dynamic event registration. What is your version?
I would add e.g. a shift registers that keeps track of the state, then you can query it in each event case. Each event case will have a case structure inside wired to the state. States could be (0: new, 1: data has bee acquired, 2: all is saved, etc.). "Start" would only work if state is 0 or 2, "save" would only work if state is 1, etc.
LabVIEW Champion . Do more with less code and in less time .
Maybe you are looking for
-
How to put ituness movies onto separate hard drive?
I have just started to downloads films from the itunes store, however I don't want to clog up my Mac's hard drive. Is there any way to put the Movies onto an external hard drive? Please bear in mind I watch the films by streaming to Apple TV.
-
Hi, I'm trying to connect an external HP 2510i (WD005AA) monitor to my M6-K125DX HP Envy notebook. I'm using an HDMI to DVI adapter cable but the monitor says it does not receive a signal. The display shows no image en after a while, the monitor goes
-
Hello everyone. I am having a USB problem with my Inspiron 00 with Windows XP. It will not Detect my Creative Zen Micro. At first, everything was fine. Problem started when I upgraded from Windows media Player 0 to . When I "Rolled Back" to WMP 0, wo
-
EIS : Data source name not found and no default driver specified
Hi I have Oracle Essbase installed in a x86_64 machine. I have configured odbc 64 bits how is indicated in SQL Interface Guide, but when try to create catalog the message "ODBC Error [DataDirect][ODBC lib] Data source name not found and no default dr
-
i dont want a discussing I want this fixed !!!