While executing the t-code OMT3R getting error

Hi,
   I am a basis consultant, one of my user getting the following error.
while executing the t-code OMT3R, he is getting the error "Do not make any changes (SAP entry)" (Message no. SV117).
His system configuration is :
SAP ECC6.0
SAP_ABA              700                     0011     SAPKA70011
SAP_BASIS      700        0011     SAPKB70011
ST-PI     2005_1_700     0002     SAPKITLQI2
PI_BASIS     2005_1_700     0011     SAPKIPYJ7B
SAP_BW     700     0012     SAPKW70012
SAP_AP     700     0008     SAPKNA7008
LCAPPS     2005_700     0001     SAPKIBHD01
(LCAPPS) 2005_700
SAP_APPL     600     0008     SAPKH60008
can anybody tell me the cause of the problem. please give me a solution to the issue.
Thanks
Madhuri.

Dear All,
The Issue has resoloved for Referec look in to the SAP_Note- SAP Note 162991
Thanks a lot for your great support on this issue.

Similar Messages

Problem while executing the transaction code FMBV (Reconstruct)

We are facing a problem while executing the transaction code FMBV
(Reconstruct Availability Control in Funds Management) in it when we
execute this transaction system only updates the expenditure which is
made before technical upgrade from 4.6c to ECC6 EHP6, against the
Assigned Budget (KBFC budget type) in the Annual Budget Table (BPJA)
and
the expenditure which we made after the upgrade, the program just
ignore
it. We can also see the expenditure in the standard FBL3N report.
Please guide us.
Thanks and Best Regards,

Dear Abrar
In your description, you refer to missing update after an upgrade. First of all, see if table FMIT is consistent, as it is the basis for calculating the assigned values during AVC reconstruction.
Refer to this note:
977016 FMIT: Missing totals records in Funds Management And perform following steps:
1.- Run program RGZZGLUX
2.- Run program RFFMRC04 to match totals table with line items. A test run after a successful effective run should not find inconsistencies.
3.- If RFFMRC04 does not show more inconsistencies, run FMBV as final step.
Note that this reconstruction must be done without any other budgeting/posting activities at the same time, otherwise you may cause other inconsistencies.
Please let me know the results.
Best regards,
977016 - FMIT: Missing totals records in Funds Management
Symptom
After the upgrade to ERP 2004 or higher you realize that the FMIT totals table is no longer updated in Funds Management. You start the RFFMRC04 report to reconstruct the totals, but the report still displays the missing totals after an update run.
Other Terms
FMIT, EA-PS, ECC 5.00, ECC 6.00, ECC 7.00
Reason and Prerequisites
This problem occurs due to a generation error.
Solution
Start the RGZZGLUX report to generate missing source code in FI-SL. Then start the RFFMRC04 report to reconstruct the totals, now another run of the report should no longer display any errors.

I am Using Ajax with DWR while running the application i am getting error?

Hi,
I am using DWR concept while running the program i am getting the following error:
uk.ltd.getahead.dwr.util.CommonsLoggingOutput info INFO: Exec[0]: Demo.sayHello()
and also all the methods that are there in that Java class. Plz anybody help me how to overcome this problem

Hi Rameshkumar,
The workaround mentioned by Chris will not be required in future versions of TopLink 10.1.3. We have removed our dependency on the 3-arg javax.xml.namespace.QName constructor that is not present in the WebLogic 8.1 distribution of the QName class.
-Blaise

When I execute the APD I am getting error?

When I execute the APD I am getting below error.
Pleasse help me to resovle this.
Duplicate records when writing data to DataStore object ZO08_ABC
Message no. RSAN_RT551
Diagnosis
During data processing, one of the analysis processes does not guarantee the uniqueness of data records in terms of the key fields they may have. One of the DataStore objects, however, has key fields. When data is written to DataStore object ZO08_ABC there must only be one data record in the key fields for each characteristic combination.
System Response
The analysis process is terminated because it is not possible to save all the data in DataStore object ZO08_ABC
Procedure
Check the definition of the analysis process and make any necessary changes. Redefine the analysis process in such a way so that the update does not produce duplicate data records. You could ensure against duplicate data records by proceeding as follows:
Check whether all key fields are filled correctly in the field assignments on the data flow arrow that enters the DataStore object.
Insert an aggregation node in front of the DataStore object and aggregate the data to match the key fields of the DataStoreobject. In the settings for the aggregation node, use the key fields of the DataStore object as grouping fields and all other fields as aggregation fields.
Points will be definitely assigned.
Thanks,
Vasu

Hi,
The values in query may have different combination of characteristics.. may only few of those are Key field to the ODS.
So Wen you display data , you can select the Key fields and sort.
And about aggregate...
Eg:
report values
X       y        z    K1
aaa bbb ccc    10
aaa bbb ddd     20
now ODS has X y as key field then load wil fail as u can see 2 records from report/query
So wen you put aggregate block on query ( and filter with z or not present in ODS) out put then
X            y          z (filtered)         k1
aaa      bbb        ccc                     30
if you need the Z value then i think you need to use transformation.

Error while activating the datasource [UD Connect]. getting error as '&'

Hi Friends,
I am trying to get the data from a SQL source through UD connect.
I do the proposal and map all the info objects to the respective columns.
When i acticate the data source i am getting the error as
'&' and Error while Error when activating DataSource 'ZEFF_ENTRY UD_ECUBE'
Please do tell why such errors occur and also the solution to handle such errors.
Thanks in advance.
Veena

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

While executing the Procedure Getting Error

Hi I am New to ODI.
I create one new Procedure just to delete the Target table.
delete from <%=snpRef.getTable("L","T_CUSTOMER","D")%>. T_Customer is my target table.Technology:Oracle(Both Source and Target)
I selected the correct Context ,Schema and Technology.
While executing the procedure i am getting following error
java.lang.Exception: Internal error: object ConnectConnection
ColConnectId:null
ColContextCode:DEV
ColConName:null
ColIndCommit:null
ColIsolLevel:null
ColLschemaName:null
ColPlanComp:null
ColTechIntName:null
DefConnectId:null
DefContextCode:DEV
DefConName:null
DefIndCommit:null
DefIsolLevel:null
DefLschemaName:FCS
DefPlanComp:null
DefTechIntName:ORACLE
ExeChannel:J
IndErr:1
IndLogMethod:null
IndLogNb:null
LogLevDet:3
Nno:1
OrdTrt:0
ScenTaskNo:1
SessNo:61001
TaskName1:Procedure
TaskName2:Delete
TaskName3:Delete
TaskType:S
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execSrcOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Thanks in advance.

i Used the below syntax and checked its working fine.
delete from <%=snpRef.getObjectName("L","T_CUSTOMER","D")%>

Got system error while executing the workbook

Hi All,
While executing the workbook, I m getting the following error:=-
Abort system error:RSDRC/ Function rsdrc_cube datget_disp rfc tas
Abort system error:RSDRC/ Func RSRDC_MULTICUBE_DATA_GET_PARA ERROR IN RSDRC_

Hi Sonika,
I think the DataTarget is not in active status.
Assign points if it helps...
Regards,
ARK

Dump while Executing the Report HINUINFU

Dear All
I am getting Dump while executing the T.Code - HRPBSIN_IN_INFU (HINUINFU). As per my Configuration it should update the IT0267 and the IT0582. While debugging the We found out that its updating the IT0267 internally. But while reaching to IT0582 its reflecting on the feature 40CEA and the T549D.
here we are having the Telephone Reimbursement for this i copied the Tax code SEXM to ZTEL and assigned to my wage type
I also maintaied this Subtype to the feature 40CEA.
Checked also the IT0582 and its subtype time constraint.
Still the the DUMP persisisting. Please provide the solutions if any of you come across with the same situation.
Thanks & Regards
Srikanth Reddy

Hi
Issue has been resoved internally. Return value to feature set as HINUOSD0 to MOLGA. hence closing the thread
Regards
Srikanth Reddy

Error while executing the payroll through transaction code PC00_M40_CALC

Dear Sir/ Madam,
While executing the payroll through the transaction code PC00_M40_CALC , i am getting the error as mentioned below :
"Division by zero not performed "
Calculation rule X0133****5 RTE = ISDIVP DIVID ARR ZERO=A ADD
I am not able to resolve this error. So request to guide me on this.
Thanks & regards,
vijaya.s.c.
Moderator message: wrong forum, please have a look in the (I guess) ERP HCM forums.
Edited by: Thomas Zloch on Jan 24, 2012

Hi,
Maintain have you changed any x013 rule?
If not, just maintain attendance/time events then process the payroll.

Deploying simple SharePoint 2013 feature causing error: "Error occurred in deployment step 'Add Solution': An unknown exception occurred while executing a sandboxed code solution request in the worker process."

When trying to deploy a sandboxed solution containing only a feature with a simple associated event receiver from VS 2013, I'm getting the following error:
Error occurred in deployment step 'Add Solution': An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0
I'm working in Visual Studio 2013, deploying to SharePoint 2013.
The SharePoint project is very basic. I've only added a feature and an associated event receiver. It works without the event receiver. Then after I simply add the event receiver I get the error.
I've tried deploying directly from VS 2013 as well as publishing to a .WSP and uploading via web interface. Same error reported using both methods. I'm doing this using an Administrator account that I've confirmed is a site collection administrator.
Additionally, I've found that if I change Sandboxed Solution to False, deploy it, retract it, then change Sandboxed Solution back to True, then I can successfully deploy it. But this doesn't seem to be a permanent solution as the error will resurface a day
or two later...

Hi Steve,
Are you running your SharePoint 2013 on domain controller?
http://www.learningsharepoint.com/2013/08/09/sharepoint-2013-error-an-unknown-exception-occurred-while-executing-a-sandboxed-code-solution-request-in-the-worker-process-rn0/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b7408608-c21b-45d9-bc16-e6afff510cd2/installed-sharepoint-2013-foundation-on-window-2010-server-issues-activating-sandbox-solutions?forum=sharepointadmin
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

While executing the following pl/sql block Iam getting following error

While executing the following pl/sql block
Iam getting following error
ORA-06550: line 5, column 11:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 5, column 11:
PL/SQL: Item ignored
declare
TYPE t_customer_details IS REF CURSOR;
o_customer_details t_customer_details;
v_rec o_customer_details%ROWTYPE;
begin
o_customer_details:=pkg_search.fngetcustdetails( 2727,1000841, NULL,NULL,119105329);
LOOP
FETCH o_customer_details INTO rec ;
EXIT WHEN o_customer_details%NOTFOUND;
DBMS_OUTPUT.PUT_LINE(' print' );
END LOOP;
CLOSE o_customer_details;
end;

sorry
declare
TYPE t_customer_details IS REF CURSOR;
o_customer_details t_customer_details;
begin
o_customer_details:= pkg_search.fngetcustdetails( 2727,1000841, NULL,NULL,119105329);
FOR v_rec IN o_customer_details
LOOP
DBMS_OUTPUT.PUT_LINE(' print' );
END LOOP;
END;I changed code,
Can you say , o_customer_details:= pkg_search.fngetcustdetails( 2727,1000841, NULL,NULL,119105329); is it right?
pkg_search.fngetcustdetails return ref cursor??

Getting ORA-06512/ORA-00972 ERROR WHILE EXECUTING THE PROCEDURE????

Hi ,
while executing this procedure , I am getting follwoing errors:
Create or Replace procedure ADD_CUSTOM_INDEX is
INDX_NOT_EXIST Number;
CREATE_SQL_STATMENT VARCHAR2(1500);
ALTER_SQL_STATMENT VARCHAR2(150);
CURSOR C1 IS select INDEX_NAME,CREATE_DDL FROM W_CUSTOM_TEST, WC_COMPANY_G WHERE W_CUSTOM_TEST.SYS_TENANT_ID = WC_COMPANY_G.BU_ID;
BEGIN
for V_ROW in C1 loop
     SELECT COUNT(USER_INDEXES.INDEX_NAME) INTO INDX_NOT_EXIST FROM USER_INDEXES WHERE USER_INDEXES.INDEX_NAME = V_ROW.index_name;
     IF INDX_NOT_EXIST = 0 THEN
     CREATE_SQL_STATMENT := ''|| '"'|| V_ROW.CREATE_DDL ||'"' ||'PARALLEL NOLOGGING';
     EXECUTE IMMEDIATE CREATE_SQL_STATMENT;
     ALTER_SQL_STATMENT := 'ALTER INDEX ' ||'"'|| V_ROW.INDEX_NAME ||'"'|| ' NOPARALLEL LOGGING';
     EXECUTE IMMEDIATE ALTER_SQL_STATMENT;
     END IF;
END LOOP;
END ADD_CUSTOM_INDEX;
ERROR at line 1:
ORA-00972: identifier is too long
ORA-06512: at "LOLAP.ADD_CUSTOM_INDEX", line 13
ORA-06512: at line 1.
sturtuce of W_custom_test table is as below:
CREATE TABLE "LOLAP"."W_CUSTOM_TEST"
("INDEX_NAME" VARCHAR2(30) NOT NULL ENABLE,
     "SYS_TENANT_ID" VARCHAR2(15) NOT NULL ENABLE,
"CREATE_DDL" VARCHAR2(1200),
"COMMENTS" VARCHAR2(200),
     "STAT_CD" VARCHAR2(30) DEFAULT 'Active' NOT NULL ENABLE,
     "CREATED" DATE DEFAULT SYSDATE NOT NULL ENABLE,
     "LAST_UPD" DATE DEFAULT SYSDATE NOT NULL ENABLE
Any Pointer??????

Hi
Instead of giving as below, go for the not null constraints.
"STAT_CD" VARCHAR2(30) DEFAULT 'Active' NOT NULL ENABLE,
"CREATED" DATE DEFAULT SYSDATE NOT NULL ENABLE,
"LAST_UPD" DATE DEFAULT SYSDATE NOT NULL ENABLE
That should help
Regards
Sudheer

Gettng Error while executing the procedure(oracle 10.2.0.3.0)

Hi all,
I am getting following error While executing the package .
    PLS-00103: Encountered the symbol "Truncate" when expecting one of
         the following:
         * & = - + ; < / > at in is mod remainder not rem return
         returning <an exponent (**)> <> or != or ~= >= <= <> and or
         like LIKE2_ LIKE4_ LIKEC_ between into using || multiset bulk
         member SUBMULTISET_I have written follwing query in the package body.
EXECUTE IMMEDIATE 'TRUNCATE TABLE FORT ';
EXECUTE IMMEDIATE '
     INSERT INTO FORT (CID,CODE,DESC,SCODE,SES,T_DT,SDN,LANG)
     SELECT
       SERVICES.CID                                                     CID,
       PROFILE.FUCODE                                               CODE,
       TO_DATE(SUBSTR(SERVICES.STAT_CHNG,-7,6),'YYMMDD')   T_DT,
       PHOR.NUM                                                               SDN,
       C_ALL.cLANGUAGE                                      LANG
     FROM
      SERVICES      .....Please give me the solution for this .
Thank y ou
Edited by: user636482 on Apr 10, 2009 1:08 AM

I am getting following errors if I gave " ' " after not null.
LINE/COL ERROR
42/8     PLS-00103: Encountered the symbol "AND" when expecting one of the
         following:
         begin case declare end exception exit for goto if loop mod
         null pragma raise return select update while with
         <an identifier> <a double-quoted delimited-identifier>
         <a bind variable> << close current delete fetch lock insert
         open rollback savepoint set sql execute commit forall merge
         pipe
42/56    PLS-00103: Encountered the symbol "A" when expecting one of the
         following:
LINE/COL ERROR
         ) , * & | = - + < / > at in is mod remainder not rem => ..
         <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
         LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
         The symbol ", was inserted before "A" to continue.
42/74    PLS-00103: Encountered the symbol "D" when expecting one of the
         following:
         * & - + ; / at mod remainder rem return returning
         <an exponent (**)> and or || multiset
         The symbol "* was inserted before "D" to continue.
LINE/COL ERROR
45/6     PLS-00103: Encountered the symbol "COMMIT"
52/3     PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
85/8     PLS-00103: Encountered the symbol "AND" when expecting one of the
         following:
         begin case declare end exception exit for goto if loop mod
         null pragma raise return select update while with
LINE/COL ERROR
         <an identifier> <a double-quoted delimited-identifier>
         <a bind variable> << close current delete fetch lock insert
         open rollback savepoint set sql execute commit forall merge
         pipe
85/56    PLS-00103: Encountered the symbol "A" when expecting one of the
         following:
         ) , * & | = - + < / > at in is mod remainder not rem => ..
         <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
         LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
         The symbol ", was inserted before "A" to continue.
LINE/COL ERROR
85/74    PLS-00103: Encountered the symbol "D" when expecting one of the
         following:
         * & - + ; / at mod remainder rem return returning
         <an exponent (**)> and or || multiset
         The symbol "* was inserted before "D" to continue.
88/8     PLS-00103: Encountered the symbol "COMMIT"
95/3     PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
LINE/COL ERROR
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
133/3    PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
169/3    PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:with out adding " ' " I am getting the previous error which I mentioned in Previous thread(TRUNCATE)
Thank you

Error while executing the program 'RBDMIDOC'

Hi Experts,
While executing the program RBDMIDOC
I am getting the following errors
One error in Communication data :
1)    No data distributed because of conversion errors
Two errors in Data selection and formatting :
1)    No ISO code found for the country key NT in the field NATIO
2)    Conversion error: infotype 0002, object 01,P,00000033
I am having change pointer entries in BDCP table.
Can anyone please tell me how to resolve these errors....
Thanks in advance...

us the program
RHALEINI

ODI ERROR: While Executing the interface

Hi
I have a scenario to send the table data to the excel file.configurations and able to importing the tables using RKM for source and target is successful done.
after executing the interface i am getting the below error's
Can some one please help me on that.
ODI-1228: Task SrcSet0 (Loading) fails on the target MICROSOFT_EXCEL connection TestDS.
Caused By: java.sql.SQLException: [Microsoft][ODBC Excel Driver] Table 'C$_0test' does not exist.
     at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
     at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
     at sun.jdbc.odbc.JdbcOdbc.SQLExecute(JdbcOdbc.java:3149)
     at sun.jdbc.odbc.JdbcOdbcPreparedStatement.execute(JdbcOdbcPreparedStatement.java:216)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
ODI-1228: Task SrcSet0 (Loading) fails on the target MICROSOFT_EXCEL connection TestDS.
Caused By: java.sql.SQLException: [Microsoft][ODBC Excel Driver] Syntax error in CREATE TABLE statement.
     at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
     at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
     at sun.jdbc.odbc.JdbcOdbc.SQLPrepare(JdbcOdbc.java:4830)
     at sun.jdbc.odbc.JdbcOdbcConnection.prepareStatement(JdbcOdbcConnection.java:475)
     at sun.jdbc.odbc.JdbcOdbcConnection.prepareStatement(JdbcOdbcConnection.java:443)
     at sun.reflect.GeneratedMethodAccessor65.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
     at $Proxy2.prepareStatement(Unknown Source)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:158)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)

Hi
Thank u for reply.
i checked the KM module technology is undefined.can u please help me on that.
i didn't even understood what he is happening on the back end.
the same errors are repeating every time.
ERRORs:
ODI-1217: Session EMP (372001) fails with return code -3551.
ODI-1226: Step EMP fails after 1 attempt(s).
ODI-1240: Flow EMP fails while performing a Loading operation. This flow loads target table Sheet1.
ODI-1228: Task SrcSet0 (Loading) fails on the target MICROSOFT_EXCEL connection EMP.
Caused By: java.sql.SQLException: [Microsoft][ODBC Excel Driver] Syntax error in CREATE TABLE statement.
     at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
     at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
     at sun.jdbc.odbc.JdbcOdbc.SQLPrepare(JdbcOdbc.java:4830)
     at sun.jdbc.odbc.JdbcOdbcConnection.prepareStatement(JdbcOdbcConnection.java:475)
     at sun.jdbc.odbc.JdbcOdbcConnection.prepareStatement(JdbcOdbcConnection.java:443)
     at sun.reflect.GeneratedMethodAccessor70.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at

While executing the t-code OMT3R getting error

Similar Messages

Maybe you are looking for