While Export the data to MS Word - How to avoid the Frames ???

Hi All,
I export the data from Crystal Report XI to Word document (doc) file , i used Text objects in the Report , in document file it's converted to  Frames and overlapped with other frames(so some data are hidden). is it possible to avoid the frames while exporting the report to word document.
Thanks in advance.
J.Baski

Hello,
It would be better if you format your report so your objects do not overlap but I realize sometimes it can't be avoided.
Other option is to upgrade to CR XI R2 and test again, it is a free upgrade.
Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Other option is to export to Word Editable may be a solution for you also.
Thank you
Don

Similar Messages

  • My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

    I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

    On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
    >My performance is very slow when I run graphs. How do I increase the
    >speed at which I can do other things while the data is being updated
    >and displayed on the graphs?
    >
    >I am doing an an aquisition and displaying the data on graphs. When I
    >run the program it is slow. I think because I have the number of
    >scans to read associated with my scan rate. It takes the number of
    >seconds I want to display on the chart times the scan rate and feeds
    >that into the number of samples to read at a time from the AI read.
    >The problem is that it stalls until the data points are aquired and
    >displayed so I cannot click or change values on the front panel until
    >the updates occur on the graph. What can I do to be a
    ble to help
    >this?
    It may also be your graphics card. LabVIEW can max the CPU and you
    screen may not be refreshing very fast.
    --Ray
    "There are very few problems that cannot be solved by
    orders ending with 'or die.' " -Alistair J.R Young

  • How to export a PDF to a word document? at the moment it came up with "The encoding (CMap) specified by a font is missing ????? what can I do?  thanks

    How to export a PDF to a word document? at the moment it came up with "The encoding (CMap) specified by a font is missing ????? what can I do?  thanks

    Hi frenchiem,
    This is due to the PDF file cannot display the original fonts. To fix it, creator should create the PDF file with the embed font option enabled. Thus, user can open the file on any platform with the same layout. Or the Acrobat product can display them after you install the appropriate font support package on the client side.
    Regards,
    Rave

  • How can I rollback from Yosemite to Lion? I need to do this as I purchased a newer iMac and I have the old 17" iMac HD that I want to get the data migrated from. When I start the Migration Assistant it tells me that the OS X version is too old. Help!

    I have purchased a newer mid 2011 iMac for my wife to replace her dead 17"iMac from 2006. It was running Snow Leopard. The new iMac has Yosemite and when I go into Migration Assistant it tells me that the OS X is too old, implying that I cannot get the data from it. How can I migrate this data to the new iMac? I have the hard drive removed and in an external enclosure connected to the new iMac.
    Thanks,
    Bill Stratman

    Since any OS since Lion does not support Rosetta or PPC applications, you may want to check her apps for compatibility.
    Have you tried to follow all the instructions here:
    OS X Yosemite: Transfer your info from a computer or storage device
    Also, as a general note: when you got the 2011 iMac did it have the original OS installed as required by the SLA? The seller is to remove any OS version obtained at the app store since the license is not transferable - did he do that? If not, as the OS download is tied to the Apple ID used to obtain it, you will not be able to update apps or reinstall the OS, so may I suggest you do this step now before you start porting over all the files. Use Internet Recovery: Hold Command + Option + R while restarting/rebooting until you see a spinning globe and a progress bar. After 2 - 10 minutes, you'll be connected to Apple's servers and see a Utilities window. Go to Disk Utility and choose erase your drive; once finished, go back to the window and choose to reinstall OS X. This should install a fresh original OS version which you can then update and tie to your wife's Apple ID.

  • HT1918 I would like to change the data of my credit card. For the next year I live in Germany, I have a geman visa card, but I want the itunes and everything to be in english language. How can I do this?

    I would like to change the data of my credit card. For the next year I live in Germany, I have a german visa card, but I want the itunes and everything to be in english language. How can I do this?

    You cannot.

  • I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
    If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). 

  • I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

    I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

    You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.

  • Ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?

    ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How can I get the date and time and display it on the report main page?

    Gurus,
    How can I get the date and time and display it on the report main page?
    Thanks!

    Hello,
    You can create a Formula Colum returning a date :
    function CF_1Formula return Date is
    begin
    RETURN(SYSDATE);
    end;
    Put a Field in the Layout having this formula column as source .
    Regards

  • Data Mining : Association Analysis - How to find the Created Data source

    Hi friends ,
    I had created a model for Association Analysis and I trained the model  and I had maintained a Data source for the model and my question is it shows the associate data source name as "Z_RSDME_AX_DS_0002" and the Application Component as "0DM_XSEL" but when I tried to search for Data source it shows that Data source not found, how to see the created Datasource
    Thanks & Regards,
    Vishall
    Edited by: vishall somasundaram on May 5, 2011 4:00 PM

    Hi,
    Go to RSA1 and click on Data Sources. Give the Source System as the client name of your BI system. It will show you all the list of the datasources under your BI client. Now under datasources in the topmost node, right-click and select replicate metadate. It will give you options to replicate your Z_RSDME_AX_DS_0002 datasource. Once replicated, just activate the datasource.
    Until and unless you replicate metadata you wont be able to see your Z_RSDME_AX_DS_0002 datasource.
    Hope it helped.
    Thanks,
    Appu

  • How to avoid the Amount and Date values for VOID Cheques

    Hi All,
    I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
    Can any one tel me how to avoid the Amount and Date values for VOID Cheques
    Your help will be greatly appreciated.
    Regards
    Yathish

    Hi,
    I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
    If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
    Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
    Regards
    Subramanian

  • When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year.  Why is this and how can I look up the year?

    When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year.  Why is this and how can I look up the year? 

    Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
    To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

  • In the Alarm & Event Query VI how to show the alarm data

    In the Alarm & Event Query VI how to show the alarm data in the front pannel using the table or multicolumn listbox .thank you very much！！！

    Hi,
    Most likely there is something wrong with your specific database or your LabVIEW DSC installation. I just used the Alarm & Event Query.vi in my machine and it seems to work fine, I can see all the alarms as well as events containned in the database.
    You may considerer generate another database (change the logging directory) and see if the behavior goes away. Also, make sure you have alarms and events on that database.
    I could run the Alarm & Query.vi by just openning its front panel and placing the correct database in the appropriated control.

  • I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

    I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

    Welcome to the Apple Community.
    A number of users have encountered this problem, for existing users the problem has largely been resolved by restarting the Apple TV. However since you are a new user it would be wise to check that your settings are correct to begin with. Ensure the router allows access over port 123 (TCP) and that you are using the DNS settings provided by the ISP and not your own.

  • How to avoid the screen of selection output device

    Hi all,
    Who can tell me how to avoid the screen selection output device when running a smartform.
    Best regard.

    Hi,
          data: wa_SSFCTRLOP  type SSFCTRLOP.
           wa_SSFCTRLOP-DEVICE = 'PRINTER'.
           wa_SSFCTRLOP-NO_DIALOG =  'X'.
           wa_SSFCTRLOP-PREVIEW = 'X'.
        in the function module
       call function '....
       exporting
       CONTROL_PARAMETERS = wa_ssfctrlop
    regards,
    Santosh Thorat

Maybe you are looking for