While extracting LR 4.2 files I am getting an error to re-download the installer but to no avail

I am using Win 7, 64 bit; I am running LR 4.1 RC2; have downloaded LR 4.2; when trying to extract the files from the download, I get an error and am told to re-download the LR installer again. I have deleted and downloaded the software several times to no avail. So what is the issue and how can I install LR 4.2? I have successfully installed the updates for CS6, Bridge, Camera Raw, etc. Thank you.

Do you have another browser to download? That often does the trick.

Similar Messages

ORA-31603:While Extracting SQL of a table I am getting this error.

Hi,
I am getting below error whenever I try to get the SQL for any table. I tried executing DBMS_METADATA() also but the same error is coming.
Please let me know what needs to be done IF I want to extract the DDL for any object.
ORA-31603: object "EMP" of type TABLE not found in schema "MKT"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA", line 3241
ORA-06512: at "SYS.DBMS_METADATA", line 4812
ORA-06512: at line 1
Thanks,
Rusty....

Hi,
use AUTHID CURRENT_USER show as below exmaple...
CREATE OR REPLACE FUNCTION xx_get_ddl(
p_object_type IN VARCHAR2
, p_object_name IN VARCHAR2
, p_owner IN VARCHAR2
RETURN CLOB AUTHID CURRENT_USER
IS
v_string CLOB;
BEGIN
SELECT DBMS_METADATA.get_ddl(p_object_type
, p_object_name
, p_owner
INTO v_string
FROM DUAL;
RETURN v_string;
EXCEPTION
WHEN OTHERS
THEN
RETURN NULL;
END;

Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.

Tried to install OS X Yosemite on my MacBook. Got message that it could not be installed on my computer due to error while extracting files from package "Essentials.pkg". When i quit the installer as recommended it goes in a loop and gets stuck.

Hey corrafromlondon,
Thanks for the question. After reviewing your post, it sounds like the installer file isn't working. Have you tried deleting the installer and redownloading the installer? I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
How to install OS X Yosemite on your Mac - Apple Support
you can find the Yosemite installer app in your Applications folder or Launchpad.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

While executing a jar file I am getting an error

while exec a jar file i am getting an error
invalid file (bad magic number): Exec format error
i tried to execute it with the commnad
java -jar test.jar
or by directly too
./test.jar

Than tell me how to launch a jar file I tried different ways like
java -jar MyJar.jar
and
MyJar
and
./MyJar
but its not worked

Why would an error pop up saying the installer is damaged. The Installer can't open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

why would an error pop up saying the installer is damaged. The Installer can’t open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

I can't open .pkg files. i get an error telling me to choose an application to open them. the Installer app is not in my Utilities folder or in System/Library/CoreServices.

i can't open .pkg files. i get an error telling me to choose an application to open them. the Installer app is not in my Utilities folder or in System/Library/CoreServices.

Install the UnArchiver and try again.
http://wakaba.c3.cx/s/apps/unarchiver
There is no Installer.app in the Utilities or Applications folder, there is one in the System/Library/CoreServices.
If yours is not there, then you need to:
1: Backup your data off the machine to a non-TimeMachine drive and disconnect all drives.
2: If you have TM, try to restore the Installer.app from the TM drive and reboot. See if things work.
If the above doesn't work, your going to have to re-install just OS X 10.6 (and bundled programs) from the disk by holding c and booting off the 10.6 disk and simply installing OS X. Then software updating to 10.6.8.
This will replace all bundled programs and OS X, not touch your files (backup regardless) and most third party programs.
Some third party programs will have to be reinstalled form original sources because they install Kext files into OS X and thus kicked out by the 10.6 reinstall form disk.
All should go well, however if you boot to a gray screen or other freeze, reboot holding the shift key down, then update all your third party software to be current to 10.6.8.
Another method is to re-install in to CoreServices the Installer.app from the 10.6 disk using the extraction program called Pacifist from CharleSoft, then running software update to get any updates for Installer.app.
http://www.charlessoft.com/

Trying to login to software program known as hamspher (vip simulated ham radio, it downloaded the program but it will not allow me to login with call sign and pin. it has to be opened with what they call a jar file. how do i do this?

trying to login to software program known as hamspher (vip simulated ham radio, it downloaded the program but it will not allow me to login with call sign and pin. it has to be opened with what they call a jar file. how do i do this?

This is compatible with Mac? Especially Snow Leopard (if that is what you'e running)?
Have you considered posting your question in their forums?
Here is some information re. the jar file:
http://ostermiller.org/opening_jar_files.html

I lost the installation disks for CS4 master collection. Where can I download the installation file?

Hello,
I lost the installation disks for CS4 master collection polish version. Where can I download the installation file?

Hi filmowka,
Welcome to the Community!
Go to http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and choose Master collection CS4 from the list.
Follow the Very Important Section else the download will not start.
Thanks!
Ankit

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". need help

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

How do I convert a VLC file to imovie. I have managed to download the mini dvd disc from the video camera onto a USB and have saved the file on my desktop but have no clue how to get it into iMovie so I can edit and send via email. Any ideas!!!

How do I convert a VLC file to iMovie.
I've managed to download the mini dvd from the video camera onto a USB and have save onto my Desktop.
But have no idea how to convert to iMovie so I can edit and attach video to an email and Facebook.

Edit WMV
http://www.microsoft.com/windowsxp/using/moviemaker/getstarted/default.mspx
and http://www.microsoft.com/windows/windowsmedia/forpros/encoder/default.mspx
Also... I have NOT used those products, I only forward due to other mentions
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
$99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
$99 http://www.womble.com/products/mvw.html
$80 http://www.nchsoftware.com/prism/index.html
$75 http://www.videoredo.com/en/index.htm
$75 http://www.magix.com/us/movie-edit-pro/
$70 http://www.nchsoftware.com/prism/index.html Converter
$40 http://www.daniusoft.com/dvd-ripper.html#135
$40 http://www.deskshare.com/dmc.aspx Digital Media Converter
$00 http://www.squared5.com/ MPEG Streamclip Converter
$00 http://www.erightsoft.com/SUPER.html Multi-Converter
$00 http://www.virtualdub.org/ Mpeg to AVI Converter

I can't seem to open (view) my photos. I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."

I can't seem to open (view) my photos. I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info." I have never had this happen before? Thanks!

Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions.
OT

I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found. Would you like to locate it now?" It happens on all my tunes and each one I select ends up with a "?"

I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found. Would you like to locate it now?" It happens on each tune I select and a "?" appears beside the song. Does this sound familiar to anyone?

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a

My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a way to buy a valid serial number and then 8 stops working again. I’d be happy if the 8 I paid for worked right or I could get 9 for a small cost but I cannot afford $450 or $20/month. I need a permanent solution that I should be already paid for with 8 pro.

After multiple repair procedures with reboot in AA8 I was eventually able to restore the printing to pdf function from various software. However I have again lost my Acrobat tab in Outlook 2007. I need that back, but today an even bigger problem arose. AA8 has stopped printing to fax. It faxes a blank page. The only fax printing option is “Microsoft Shared Fax Driver”. My fax software is “Windows Fax and Scan” and it was working fine just a couple weeks ago. My OS is Windows 7 Professional.
I have tried doing the updates you referred to but I get error messages like these:
“No qualifying products found to apply this update, or update has been already applied”
or
“The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing , or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.”

In my computer some of the iTunes files got deleted accidently and I couldn't reinstall it . Evrytime I try torun setup file I am getting this error message "C:\Users\Rif\AppData\Local\Apple\Apple Software Update\" ,appreciate if anyone can help me on th

In my computer some of the iTunes files got deleted accidently and I couldn't reinstall it . Evrytime I try torun setup file I am getting this error message"C:\Users\Rif\AppData\Local\Apple\Apple Software Update\" ,appreciate if anyone can help me on this pls?

Even after deleting all files and folders from hard drive i am still getting this error!!

While extracting LR 4.2 files I am getting an error to re-download the installer but to no avail

Similar Messages

Maybe you are looking for