While Fical year changing .............................
Hi Gurus,
I am doing fiscal year change (T-code :AJRW). It is giving errors like following
"Asset 000000010200 -0000 in CoCd AUDL : Error in fiscal year change"
like above it is giving for all assets
Please give solution. It is very urgent
Thanks
Krishna
Hi,
u check whether the Depreciation posted in all periods, or is there any
dep need to post in special periods, and u check the All Asset Master Records
for Expired Usful Life. if total useful life is expired then u need to retire or scrap
those assets.then u can go for Asset FY Change (AJRW)
i hope this will help u.
Similar Messages
-
While trying to change password getting ora-00600 [4842] - Plz help
while trying to change password getting ora-00600 [4842] - Plz help
database : 9.2.0.4
o/s : LinuxHi,
when getting an ORA-600 you always should contact Oracle support please ;-)
To diagnose an ORA-600 the stack trace will be necessary - see the trace file mentioned in the alert.log when the ORA-600 did happen.
But FIRST OF ALL you should definitely apply patch set 9.2.0.8 and see if this error happens again (metalink.oracle.com ==> PATCHES ==> Quick Links ==> <your platform>). Support will ask you to do the same before they start diagnosing anything in this case.
And please keep in mind that 9.2.0 has reached end of Premier Support more than 1 year ago.
Kind regards
Mike -
Fiscal year change not yet made for company 1234
While executing the T-code S_ALR_87011963 (Asset balances report) reporting year : 31.12.2009, am
getting the below error u201CFiscal year change not yet made for company
code 1234u201D
1) In T-code OAAQ, For company code 1234 closed fiscal year is 2008.
2) Thru F-90, I can post the acquisitions in year 2009.
3) Fiscal year 2009 is already opened, while running the reports why
this error message is showing u201CFiscal year change not yet made for
company code 1234u201D
4) I have to get the reports for closed fiscal years, am not getting
any reports for fiscal years 2006,2007,2008.
Please post your comments.
Thanks,
vinayHi,
Please give me below mentioned details.
1) What is the year showing in OAAQ ?
2) Which year you have opened in AJRW ?
Best Regards,
Madhu -
Fiscal Year Change - Asset Accounting
Dear Experts
While Changing the Asset Year (AJRW) system is giving error message for only four (4) assets. The error is as following:
Asset 000000151003-0000 in CoCd VALC: Error in fiscal year change
Message no. AA707
Diagnosis
The fiscal year change in one asset has produced an error.
System Response
No fiscal year change will be performed for this asset, processing will be continued with the following asset.
Procedure
Determine the error message using the function 'fiscal year change' when displaying the asset values.
The said asset is having 0% depreciation Key but we posted unplanned Depreciation using transaction type 640. Capitalization Date of the asset is 28th Feb. 2008 and first acquisition date is also 28th Feb. 2008. We posted unplanned depreciation twice one on 28th Feb and second on 31st march 2008.
Please let me know what could be the reason u2026
Regards
Ratnakar KHi,
Actually this Asset is Land and User is posted Amortization Using Unplanned Depreciation.
Can we change the Dep key and repeat the depreciation run again or please suggest if any other solution...
Regards
Ratnakar K -
I installed Lightroom 5.6 (full version, not trial) on Mac, when starting I receive an error message "An error occurred while attempting to change modules".
I tried removing it and reinstalling but the same error comes up.
Anybody have any recommendations?A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions. You might try doing a repair permissions for your user and/or run LR as an administrator user. I am a PC person so cannot tell you exactly how to do that.
https://forums.adobe.com/message/1457020 -
I was filing TAX thru TurboTax. While filing TurboTAx changed full amount which wen to iTunes but TurboTax app says “payment didn’t go thru’. TurboTax suggest to contact iTunes Support to dismiss purchase or fix the problem.
you have paid for app and when app purchase will be approved then ony you should able to make payment for your TAX.
I had same problem. I called apple guys and got my money back than I use web version ofn turbo tax.
that works perfectly well.
problme with app is that you can not see your tax paper next year as web and app does not have any sync link.
use web version. -
Fiscal year change not yet made for co. code
hi,
while viewing the asset balance report, system is throwing 'fiscal year change not yet made for co. code'. However in T.code AJAB, system is showing no error in log. While executing in background & checking in sm37, in spool the system showing 'dep. not done completely for an asset'. However, the asset is AUC & in master data the dep. key is 0000.
Kindly help me out as it is very critical because user cannot able to post it.
Regards,
surendraHi
Even though you finished the AJRW, you need to change the Date of Legacy Data Transfer in this view
V_T093C_08 (Please use SE11 transaction code -
select view radial button and give this view V_T093C_08 and select display -
execute accordingly ex: 31/12/2008 for 2009 )
Let me know for any issues
Regards,
Suresh -
Service Requests-Business days when year changes
Hi All,
I am trying to calculate for how long a SR has been open in business days only.
I have successfully used Mike Lairson's formula for the last 9 months but it seems it cannot cope with year changes. If the begin data is in 2009 and the end date in 2010, the results are not correct anymore.
E.G. For an SR that was opened on 12/30/2009 and closed on 01/05/2010 should return 5 business days but it is actually returning 110.
The syntax that I used so far is:
(CASE
/* Convert Sunday to the Business Day Of the Year */
WHEN DAYOFWEEK("Service Request"."Closed Date and Time") = 1
THEN (DAYOFYEAR("Service Request"."Closed Date and Time") - WEEK("Service Request"."Closed Date and Time")) -
(WEEK("Service Request"."Closed Date and Time") - 2)
/* Convert Saturday to the Business Day Of the Year */
WHEN DAYOFWEEK("Service Request"."Closed Date and Time") = 7
THEN (DAYOFYEAR("Service Request"."Closed Date and Time") - WEEK("Service Request"."Closed Date and Time")) -
(WEEK("Service Request"."Closed Date and Time") - 1)
/* Convert Mon-Fri to the Business Day Of the Year */
ELSE (DAYOFYEAR("Service Request"."Closed Date and Time") -
WEEK("Service Request"."Closed Date and Time")) +
(2 - WEEK("Service Request"."Closed Date and Time")) END)
(CASE
/* Convert Sunday to the Business Day Of the Year */
WHEN DAYOFWEEK("Service Request"."Opened Date") = 1
THEN (DAYOFYEAR("Service Request"."Opened Date") -
WEEK("Service Request"."Opened Date")) -
(WEEK("Service Request"."Opened Date") - 2)
/* Convert Saturday to the Business Day Of the Year */
WHEN DAYOFWEEK("Service Request"."Opened Date") = 7
THEN (DAYOFYEAR("Service Request"."Opened Date") -
WEEK("Service Request"."Opened Date")) -
(WEEK("Service Request"."Opened Date") - 1)
/* Convert Mon-Fri to the Business Day Of the Year */
ELSE (DAYOFYEAR("Service Request"."Opened Date") -
WEEK("Service Request"."Opened Date")) +
(2 - WEEK("Service Request"."Opened Date"))
END)
+
/* Adjust for Year Change */
(365 * (YEAR("Service Request"."Closed Date and Time") -
YEAR("Service Request"."Opened Date")))
Any ideea or hint would be highly appreciated.
Thank you.
Regards,
Dorin
Edited by: user805960 on 06.01.2010 07:07Hi,
i used this formula to find out the days it calculates between 31/12/2009 and 01/01/2010, the result it gave was 106 days.
So i subtracted 106 from 365 days (365-106=259)in the formula, the formula is now giving the correct values.
I think we have to add the total working days and not the no.of days in a year.
Please can you all reconfirm the results.
Thanks
Neena
Edited by: NNK on Jan 11, 2010 3:16 PM -
While trying to change a BOM with transaction CS02, a runtime error appears
While trying to change a BOM with transaction CS02, a runtime error appears.
In intial screen he entered material ,plant BOM usage and date valid from after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
Developer trace
ABAP Program SAPLKED1_WRITE_CE4_BPS1 .
Source LKED1_WRITE_CE4_BPS1U01 Line 30.
Error Code SAPSQL_ARRAY_INSERT_DUPREC.
Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
Function HandleRsqlErrors Line 775.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
RABAX: level LEV_RX_RESET_SHMLOCKS entered.
RABAX: level LEV_RX_RESET_SHMLOCKS completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end RX_RFC
In sm21
Perform rollback
Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
Short dump "090618 110101 donalda 11557 " generated
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Occurred on 18.06.2009 at 11:01:01
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RKE_WRITE_CE4__BPS1" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
The exception must either be prevented, caught within the procedure
"RKE_WRITE_CE4__BPS1"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
"RKE_WRITE_CE4__BPS1"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.Hi ,
you are getting beacuse u are trying to do mass update to database.
Please check that below note are applicable to your system.
Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
Note 869534 - AFS MRP doesn't work properly with all BOM item categories
Thanks Rishi Abrol -
HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?
I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?
-
Error while trying to Change an Infosource
I get the following error while trying to change an Infosource. I am not able to get to the change screen and it displays the following message 'Infoobject MPVPOPR not available in the Active Version'.
I did the following to try and debug the issue...but with no luck..
1) I checked for the Infoobject MPVPOPR and did not find it anywhere (Metadata, Transport Connection, Infobjects)
2) I am able to load the data using an infopackage into the ODS.
3) Communication structure and all is Active...
I just cannot get to the Change Screen for this Infosource and it displays the error 'Inobject MPVPOPR not available in the Active Version'.
Please provide any Suggestions
Thanks and Regards
AndyAndy,
For the confirmation whether your infosource contains MPVPOPR or not.
Just goto RSA1 > InfoObjects > search MPVPOPR > double click on found > there is an option "Where used" , just click and check whether your infoobject is present in the infosource or not.
And let me know for the solution.
Thanks
Ramu -
ORA-00607: Internal error occurred while making a change to a data block
hi
i hv use testing purpose oracle 10 Xe in unix
but when today i hv connect database following error occured
SQL> startup
ORACLE instance started.
Total System Global Area 83886080 bytes
Fixed Size 1257284 bytes
Variable Size 75497660 bytes
Database Buffers 4194304 bytes
Redo Buffers 2936832 bytes
Database mounted.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
I hv check alert log , but no proper solution is given , how can start databaseDuh, and of course I missed the significance of
oracle 10 Xe in unix
XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
Good luck, APC -
Error while creating publisher change tables in CDC
Hi,
I am implementing Change Data Capture. I got getting following error while creating publisher change tables in Staging database. My database version is 10.2.0.2.0 .
I appreciate your help.
ERROR at line 1:
ORA-29540: class oracle/CDC/PublishApi does not exist
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 611
ORA-06512: at line 2
Thanks,
Venkat.This problem got fixed when I ran below script!!
@$ORACLE_HOME/rdbms/admin/initcdc.sql; -
Find the user exit while creation and change of sales order
Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022 The logic for the user exit to explode should consider the following assumptions and validations
o Customer master to have the entry at KNVV-KVGR1
o Material master to have the entry at MVKE
o UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A Quantity / Scale UoM Price(£)
0-10 PAL/TES 20
11- 20 PAL/TES 10
21- 30 PAL/TES 5
31-40 PAL/TES 2.5
>41 PAL/TES
Product B with Scales mentioned below
Product B Quantity / Scale UoM Price(£)
0-15 PAL/TES 25
16-20 PAL/TES 20
21- 30 PAL/TES 15
31-40 PAL/TES 10
> 41 PAL/TES 5
u2022 Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022 The expected results should be
o Product A qty 10 + B qty 15 added = 25Pal
o The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022 The logic for the user exit to explode should consider the following assumptions and validations
o Customer master to have the entry at KNVV-KVGR1
o Material master to have the entry at MVKE
o UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A Quantity / Scale UoM Price(£)
0-10 PAL/TES 20
11- 20 PAL/TES 10
21- 30 PAL/TES 5
31-40 PAL/TES 2.5
>41 PAL/TES
Product B with Scales mentioned below
Product B Quantity / Scale UoM Price(£)
0-15 PAL/TES 25
16-20 PAL/TES 20
21- 30 PAL/TES 15
31-40 PAL/TES 10
41 PAL/TES 5
u2022 Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022 The expected results should be
o Product A qty 10 + B qty 15 added = 25Pal
o The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet. -
Why am I receiving an error message while trying to change my phone number?
So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later." I was hoping to circumvent the 15$ fee of doing it over the phone. Finally, I decided to do an online chat, the associate did not know why the error was occurring but informed me in order to change my number over chat, i would STILL have to pay the 15$ fee. Something struck me as so wrong there, so conveniently the change features and phone number part of the website was not working, however the view/pay your bill part was always working properly, never received any error messages there. I understood it was not the associates fault however. Still that is wrong. If it was not urgent I would wait. Yes I could have tried the number block, that section was not working either, but having to renew which numbers you want blocked every couple of months makes no sense to me, if I want something blocked, i want it blocked permanently not just for 90 days. Yes I tried call/SMS blocker apps from the app store but they're faulty in that they still give you notifications of when the blocked person/number called/text or do not always block everything all the time. But when it came down to it, even the associate encountered the error message while trying to change my number. So why is this happening. Verizon is expensive but the reception is better however theirs always issues when I need to fix something. Its frustrating
Verizon was having a problem on their end, perhaps a server down for some repair or updating. However you were already aware that there was an on-going problem in your own posting and you decided to continue on.I can understand you wanting this done and trying to save the $15.00 fee. However I would have waited a bit longer until the Verizon issue had been corrected. Yes it is frustrating but again you know in advance of a problem , I can understand that this is most upsetting for you but never try to perform any change when a problem is there and I also do not like to do business on a weekend with no live tech support available. I'm sure this will all work out for you if given some time. Sorry.
So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later."
Maybe you are looking for
-
External HD issue. Finder cannot complete the operation because some data..
Last night I had a drive throw the error "finder cannot complete the operation because some data in "<file>" could not be read or written. Error code-36". I thought it was a bad disk. Then tonight I plugged in a flash drive, formatted it on the machi
-
Data Type, Message Type and Mapping for FTP
Thanks in advance for your replies. As our first production XI scenario, we need to move several (at least 46) files from our SAP instance to a couple of different servers to support our legacy systems. Once all locations are on SAP this requirement
-
I want to uninstall and then reinstall Firefox but I can't uninstall it. Nothing happens when I click remove in program access and defaults and the helper.exe file in the firefox uninstall dir doesn't do anything either.
-
Get the header in centre,make bold, change font in hierarchical alv list
Hi all I need to get the following header in the centre for hierarchical alv list: ex: General Ledger - want it to be bold
-
So i put my iPhone 5c in Recovery Mode because it when i turned it on it did not go through the boot screen. So I put in Recovery Mode. Its says it will erase everything, and I just backed my iPhone to my laptop. Is there a way i can restore from tha