While finalizing I get the blue screen and my laptop shuts down? HELP!

I pasted the diagnostic thing below but dont understand why I keep getting that blue screen and my computer to shut down on me. I have tried a couple of different brands of c.d.'s and can't figure it out. The computer is 2-3 months old I dont get it. Please help!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Sony Corporation VGN-FJ290P
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: dvd43llh (3.5.0.0), PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family\Intel(R) 915GM/GMS,910GML Express Chipset
FlashMedia\MSorMSProDevice, Bus Type SSA
IDE\DiskHTS541010G9SA00_______________________MBZOC60D, Bus Type ATA, Bus Address [0,0]
IDE\CdRomPIONEERDVD-RW__DVR-K16D________________1.00___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: PIONEER DVD-RW DVR-K16D, Rev 1.00
Audio CD in drive.
Found 19 songs on CD, playing time 76:13 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:01:65
Track 3, start time 08:02:08
Track 4, start time 11:43:11
Track 5, start time 15:43:55
Track 6, start time 22:23:05
Track 7, start time 25:45:55
Track 8, start time 29:38:08
Track 9, start time 33:28:34
Track 10, start time 37:56:60
Track 11, start time 42:25:28
Track 12, start time 45:26:27
Track 13, start time 49:08:66
Track 14, start time 54:05:27
Track 15, start time 57:58:62
Track 16, start time 60:52:58
Track 17, start time 64:56:31
Track 18, start time 68:26:42
Track 19, start time 73:01:53
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 20 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4 10 16 20 24 0.
The drive DVDRW speeds are: 4 10 16 20 24 0.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: PIONEER DVD-RW DVR-K16D on -128(0xffffff80) media at speed 0X.

I recently purchased Norton stuff and loaded it but dont know how to do all that stuff you said to do.
okay.
was that Norton Internet Security 2006? if so, right-click on the yellow ticky-Norton thing down in your task bar, and select "Norton Protection Center". click the LiveUpdate button. install everything it says is available at LiveUpdate. restart the PC if it asks you to.
open Norton Protection Center again. click on "Norton AntiVirus". click on "Scans". click on "Run full system scan".
once that's finished, and you've dealt to everything that shows up, do a spyware scan. if you don't have an antispyware program, download and install the free trial version of Ewido, and scan your PC with that.
ewido anti-malware download
once that's finished, and you've dealt to anything that shows up, go to the Symantec website (they make your Norton), and run one of their online virus scans. they take an eternity, so you may want to do that overnight:
Symantec Security Check
to do a disk cleanup, go "start > all programs > accessories > system tools > disk cleanup"
to run chkdsk (that's a disk checking/repair utility in Windows), close all active programs, go into My Computer, right-click on your hard drive, select "properties", click on the "tools" tab, and click the "check now" button.
to do a disk defrag, go "start > all programs > accessories > system tools > disk defragmenter"
love, b

Similar Messages

I powered off my Ipad and it is stuck on the blue screen and won't shut off. What can I do?

I shut down my Ipad but it has become stuck in shutdown mode on the blue screen and won't turn off. What can I do to turn it off and try to restart it?

Both buttons:

I HAVE A SONY VAIO WITH WINDOWS VISTA- SUDDENLY I'M GETTING A BLUE SCREEN (crash dump)THAT SHUTS DOWN MY COMPUTER. HOW DO I STOP THIS. ALREADY TRIED TO UNINSTALL AND RE INSTALL. MAY NOT HAVE DONE IT CORRECTLY ?

LAST WEEK STARTED GETTING A BLUE SCREEN (CRASH DUMP) AFTER CLOSING I TUNES, THAT CAUSES MY COMPUTER TO SHUTDOWN. IVE BEEN TOLD BY A PC REPAIR SHOP THAT I DONT HAVE A VIRUS. I DO HAVE ANTIVIRUS PROTECTION ON MY PC. ATTEMPED TO REINSTALL I TUNES BUT MAY NOT HAVE DONE IT CORRECTLY. I STILL HAVE THE PROBLEM. THE BLUE SCREEN ONLY HAPPENS WITH I TUNES. I HAVENT MADE ANY RECENT CHANGES TO MY MUSIC- NO DOWNLOADS /UPLOADS. ANY KNOWLEDGE OF THIS SITUATION? THANKS!!

Hey Ishland,
You are not alone. I'm getting the same thing I'm running Vista. I'm reading that Windows 8, 8.1 preview, Vista and XP.
I'm thinking this has to be a Apple update to iTunes 11.0.4.4 fix.
Cheers,
Steve
P.S. you might want to make your post easier to read by turning the cap lock off.

While running my macbook air it suddently gets the blue screen and i have to shut it down

can i do to fix it ?

power off then:
perform SMC reset
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
report back
What initiated this? anything?
If same contact Apple for free in shop diagnostic and possible repair.

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!

When I open FireFox i get the blue screen of death and then vista restarts. I get to login and then afterthe welcome window it crashes and restarts again. I can open in safe mode but if I open firefox again it restarts this loop.

The other day I opened firefox after the latest update in September. Firefox then closes and then i get logged off and vista(32 bit) restarts. I get back to login and when I try to login it gives me the blue screen and restarts again with the selection screen (start in safe mode....)I was able to login on safe mode and then on admin afterwards. Thinking the problem was just an error I went back and opened firefox on my account and the loop started again. I was forced to remove firefox but I want ti back and I want to know how this can be fixed so I can put it back on my computer.

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

I have a new iPhone 4 and every time I plug it into my laptop I get the "blue screen of death", it didn't do this the first time because I downloaded all my music from iTunes but ever since it has done this. Anybody have any insight?

I have an iPhone 4 and downloaded all my iTunes music to it. Now when I connect it to my laptop I automatically get the "blue screen of death", does anyone have any insight into this problem?

This will happen if you have photos in your camera roll and an out-of-date scanner or webcam driver. See this: http://support.apple.com/kb/TS1502

Upon start up I get a start up disk full message and to delete files, now I only get a a blue screen on start up. How to I get past the blue screen and how do I delete files?

Upon start up I get a "start up disk full message, delete files". Now on startup I only get a blue screen. How do I get past the blue screen and how do I delete files.

That;s really not enough free space... you can use a tools such as OmniDiskSweeper to find out where your large files reside and begin pruning (or copying to an external if they're files that you want to keep).
One thing is certain - if you're going to continue your current usage you're certainly going to need to install a larger boot drive.
Clinton

HT4848 Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do

Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do ?

If this is a fairly new Mac running either v10.7 Lion or v10.8 Mountain Lion she can use Lion or Mountain Recovery to repair the startup disk or reinstall OS X.

I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then the screen goes black, and "sleep" light pulses.

I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
Thanks for any help!
Gina

What your describing could be a logic board or memory issue.
You did or did not hear 3 startup chimes? If you hear 3 chimes when you start it, that would indicate a memory problem. Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac.

On start up sometimes I get a blue screen and start up hang there

On start up I sometimes get a blue screen and it hangs there the only way to get out of this is to turn the iMac off at the back then when you turn it back on the desk top appears without going through the startup screens. Even had the blue screen when starting in safe mode.

Then run Apple Hardware Test in Extended Mode, it's possible you have a hardware issue. If you still can't locate the issue the next step is taking the machine in for a professional diagnosis at your local Apple Store or AASP.

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section.

I did not install bonjour when I installed itunes now everytime I go to the itunes store I get the blue screen. How to download bonjour? Do I have to re install itunes? If I do, will my music be lost?

I did not install bonjour when I installed itunes now everytime I go to the itunes store I get the blue screen. How to download bonjour? Do I have to re install itunes? If I do, will my music be lost?

I'd try the following document first:
iTunes for Windows: System restarts, blue screen, or quits unexpectedly when accessing iTunes Store

My printer gets the blue screen

excuse me, sir
my printer is all-in-one hp envy 120 series, but today it show me the blue screen and have a code C4EBA7C1.
Can you give me some good ideas to fix it? thanks very much

Hello chengxiang,
Welcome to the HP Forums!
I understand your Envy 120 is showing a blue screen with an error message "C4EBA7C1". I will do my best to assist you! Please make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference.
I would like you to perform a hard reset on your printer for more than 60 seconds. Leave the printer turned on> disconnect the power cord from the back of the printer.
If this error message doesn't remove, then you will have to contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
Good luck.
I worked on behalf of HP.

While finalizing I get the blue screen and my laptop shuts down? HELP!

Similar Messages

Maybe you are looking for