While generating 2001 qutoa i am getting error
hi
while generating the 2001 wiht 24 quto type
the error is " not enough quoto " it is giving ....
but when i remove the tick mark for quota deduction for assign the counting rule to absence then i am not getting any error...but the limit is excedding the quoto...
so please give me the solution for this..
if am not clear i wll try to post another
Vidan,
You need to configure the deduction of the absence that you add in the IT2001, but, you should have to tell to this absence, which quota take. This is done here:
Check in SPRO>Time Management>Time Data Recording and Administration> Managing Time Accounts Using Attendance/Absence Quotas>Calculating Absence Entitlements>Rules for Generating Absence Quotas>Define Generation Rules for Quota Type Selection.
And check very well the whole configuration in "Define Generation Rules for Quota Type Selection". If you miss some step, it may not work.
Regards,
RUBEN
Similar Messages
-
While activating a request in DSO getting error code 10
While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal PardeshiCheck the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra. -
While installing HANA studio , i am getting Error
Hi Experts,
While installing HANA studio, i am getting Error " Java installation not found" . I have already installed latest JDK, JRE from www.java.com and also set path PATH.
I am on Windows 7 , 64 bit.
Any one have idea how to over come this Error?
Thanks.Hi Tomas,
I am on windows 7 64 bit. How should i verify if jdk has been installed correctly? how to verify if correct path has been set.
I am using hdbinst.exe file.
Here is log entries
19:02:46.064 - INFO: SAP HANA Studio kit detected.
19:02:46.064 - INFO: Looking for java installations
19:02:54.685 - INFO: Found 1.7.0 64bit in C:\Windows\system32\javaw.exe ($PATH)
19:03:01.635 - ERR: No proper java installation found (version 1.6 64bit is required)
19:03:05.137 - INFO: -
19:03:05.137 - INFO: Checking configuration of installation (dialog Define Studio Properties)
19:03:05.137 - INFO: -
19:03:05.137 - INFO: Looking for java installations
19:03:05.137 - ERR: No proper java installation found (version 1.6 64bit is required)
19:03:05.137 - INFO: Parameter "TargetRepositoryPath" is not set
thanks -
While downloading excel template I am getting error in Weblogic 10.3.4
while downloading excel template I am getting error as java.lang.IllegalStateException: Cannot resize buffer - 325 bytes have already been written (Servlet 2.3, sec. 5.1)
Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface? -
Error while activating the datasource [UD Connect]. getting error as '&'
Hi Friends,
I am trying to get the data from a SQL source through UD connect.
I do the proposal and map all the info objects to the respective columns.
When i acticate the data source i am getting the error as
'&' and Error while Error when activating DataSource 'ZEFF_ENTRY UD_ECUBE'
Please do tell why such errors occur and also the solution to handle such errors.
Thanks in advance.
VeenaHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy -
While activating Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting error
Dear all
While activating the Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting the following error
Error when writing routines
Message no. RSAA561
Error while activating transformation
Message no. RSTRAN510
Error when activating Transformation 0N7SM4TBBDTRG1KKDKS3QRMWAHMV490Q
Message no. RSO404
plz guide me seniors
Regards,
SunderHi,
Make sure your routines are syntatically correct in the transformation before activation.
still it is giving the same error please elaborate the issue and post it over here.
Thanks
Suresh -
While releasing billing document to accounting getting error message
Hi Friends,
I have created new condition type -YES7 and assigned to pricing procedure YDE10K ,I am releasing billing document to accounting but while releasing to accounting document I am getting error messages as "Assign condition type YES7 in CO-PA"
if i double cilck this messages I am getting below descriptions.
Assign condition type YES7 in CO-PA
Message no. KE 391
Diagnosis
The system tried to transfer billing data to Profitability Analysis. However, an error was found in the assignment of condition types to CO-PA value fields. No entry has been made in the assignment table for condition type YES7.
System Response
The billing data cannot be posted to CO-PA if there is no entry as this would lead to differences between CO-PA and Financial Accounting. This is because this condition type posts to a G/L account (S400160).
Procedure
In CO-PA Customizing, make an assignment for condition type YES7 in operating concern EU01 under "Actual postings -> SD interface -> Assign value fields".
so please let me know how to rectify this issue.
Thanks in advance.
Regards,
RamkrishnaBefore posting any question, please search the forum so that you would get solution straightaway. Check these threads
[Re: Assign condition type ZSMN in CO-PA|Assign condition type ZSMN in CO-PA]
[Re: Billing not releasing to accounting|Billing not releasing to accounting]
thanks
G. Lakshmipathi -
I am Using Ajax with DWR while running the application i am getting error?
Hi,
I am using DWR concept while running the program i am getting the following error:
uk.ltd.getahead.dwr.util.CommonsLoggingOutput info INFO: Exec[0]: Demo.sayHello()
and also all the methods that are there in that Java class. Plz anybody help me how to overcome this problemHi Rameshkumar,
The workaround mentioned by Chris will not be required in future versions of TopLink 10.1.3. We have removed our dependency on the 3-arg javax.xml.namespace.QName constructor that is not present in the WebLogic 8.1 distribution of the QName class.
-Blaise -
While running adobe interactive forms application getting error
Hi All,
I have developed one application which is in below link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
I'm using WebAs 6.40 SP9
but, after deploying and running i'm getting error like:
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:396)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:887)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process Render Request.
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:98)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:121)
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:341)
... 29 more
Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
java.net.MalformedURLException: no protocol:
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.render(PDFObject.java:3710)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRenderHandler.handle(PDFDocumentRenderHandler.java:139)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
... 32 more
Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
java.net.MalformedURLException: no protocol:
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:359)
... 35 more
Caused by: java.net.MalformedURLException: no protocol:
at java.net.URL.<init>(URL.java:537)
at java.net.URL.<init>(URL.java:434)
at java.net.URL.<init>(URL.java:383)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.createHTTPSocket(HTTPTransport.java:110)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getRequestStream(HTTPTransport.java:319)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:548)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
... 37 more
Appreciated answers will be rewarded.
Regards,
SriHi Srikanth,
Did u mapped pdfSource & dataSource Properly. If yes check whether your Server Configured to run Adobe Forms. See wether ur ads settings are as per the following document
Tutorial on Installing Credentials and Configuring ADS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f03414f8-d4ce-2a10-d4b6-ab201b329d98
f yes ur ADSUser password
must have expired follow the steps to reset the password
SAP NetWeaver '04 / 2004s
1. Log on to the Visual Administrator.
2. Follow the path:
Server -> services -> Security Provider -> User Management tab
3. Display the user ADSUser.
4. Change the ADSUser password. (You can use the same password.) Check the checkbox
'No password change is required'.
Note: The below mentioned technical user role is available for the ADSuser as of
NetWeaver 2004s SPS 7.
5. Log on to 'User Management' of your AS Java:
http://<AS Java server>:<http port> -> User Management
6. Display the user ADSUser.
7. In the 'Security policy' field, change the setting from 'Default' to 'Technical
Users' and save.
(For more information on the 'Security Policy' option, see the Release Notes in
the SAP Help Portal at
http://help.sap.com/saphelp_erp2005vp/he
lpdata/en/44/04265816343fdbe10000000a11466f/frameset.htm.)
After changing this option, the ADSUser password will not expire.
Note that this feature is not available for SAP NetWeaver '04
If not take the help of System Administrator to configure it first.
With Regards,
RooP KumaR.
Edited by: Roop kumar Annavarapu on Aug 21, 2008 3:00 PM -
While executing the t-code OMT3R getting error
Hi,
I am a basis consultant, one of my user getting the following error.
while executing the t-code OMT3R, he is getting the error "Do not make any changes (SAP entry)" (Message no. SV117).
His system configuration is :
SAP ECC6.0
SAP_ABA 700 0011 SAPKA70011
SAP_BASIS 700 0011 SAPKB70011
ST-PI 2005_1_700 0002 SAPKITLQI2
PI_BASIS 2005_1_700 0011 SAPKIPYJ7B
SAP_BW 700 0012 SAPKW70012
SAP_AP 700 0008 SAPKNA7008
LCAPPS 2005_700 0001 SAPKIBHD01
(LCAPPS) 2005_700
SAP_APPL 600 0008 SAPKH60008
can anybody tell me the cause of the problem. please give me a solution to the issue.
Thanks
Madhuri.Dear All,
The Issue has resoloved for Referec look in to the SAP_Note- SAP Note 162991
Thanks a lot for your great support on this issue. -
While trying to access parent tab getting Error---Very ungent(Prodution)
Hi Team,
We are using 3.0 version. Our application having 4 parent tabs. Each parent tab has 10 tabs and reports.
We are working from past 2 years onwards but we didn't get any issues with,
today one of the parent tab is not working whereas rest of the parent tabs(3 parent tabs) working fine but all are in same appicaton. while click on the 4th parent tab we are getting below error like page can't be diplayed.
The webpage cannot be found
HTTP 404
Most likely causes:
There might be a typing error in the address.
If you clicked on a link, it may be out of date.
What you can try:
Retype the address.
Go back to the previous page.
Go to and look for the information you want.
More information
This error (HTTP 404 Not Found) means that Internet Explorer was able to connect to the website, but the page you wanted was not found. It's possible that the webpage is temporarily unavailable. Alternatively, the website might have changed or removed the webpage.
For more information about HTTP errors, see Help.
Please help us as it is very urgent.
Thanks,
Kumar.Hi
What does your tab open when it is clicked? Is it a tabular form with many rows or a larget non-tabular form?
Your page may be hitting 32K limitation. If it is not the case, please check your alert.log for some clue.
Zulqarnain -
While Running baseLine update with Endeca getting Error with ATG11
HI All,
While running the baseline update for endeca getting below error,Please help me to resolve this issue
[11.26.14 18:26:36] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[11.26.14 18:26:39] INFO: Definition has not changed.
[11.26.14 18:26:39] INFO: Starting baseline update script.
[11.26.14 18:26:39] INFO: Acquired lock 'update_lock'.
[11.26.14 18:26:40] INFO: [ITLHost] Starting shell utility 'cleanDir_cas-output'.
[11.26.14 18:26:40] SEVERE: Error communicating with EAC agent while starting utility 'cleanDir_cas-output'.
Occurred while executing line 8 of valid BeanShell script:
5| if (LockManager.acquireLock("update_lock")) {
6| // clean directories
7| CAS.cleanCumulativePartials();
8| Dgidx.cleanDirs();
9|
10| // run crawl and archive any changes in dvalId mappings
11| CAS.runBaselineCasCrawl("CRS-last-mile-crawl");
[11.26.14 18:26:40] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
com.endeca.soleng.eac.toolkit.utility.Utility start - Error communicating with EAC agent while starting utility 'cleanDir_cas-output'.
Caused by com.endeca.eac.client.EACFault
sun.reflect.NativeConstructorAccessorImpl newInstance0 – null
Thanks,
Mahesh ChinchureIt sounds like you might be working with Endeca Commerce products - this forum is for Endeca Information Discovery.
You might try posting your questions on one of these forums:
Oracle Commerce
Technical Questions -
Generating the flatfiles from server getting error
Hi,
source file type is .csv. I am using executeprocess task to download the source file..its thrown error by the executeprocesstassk and also through command prompt. all arguments are sitting properly. I checked each and every arguments.
with the same executables i can downloaded few of the flat files.
But for this only I am facing an issue.actually How i am getting an issue is.
for eg flat file having 5 headers. like procid,procname,proccast,procsale,updateddate.
while running the task/from cmd prompt it 'll work fine for procid,procname,proccast. i mean to say getting data. but not getting rest of the 2 fields.
output: procid,procname,proccast,procsale,updateddate only hearders without data.
for some times it's throws an error below if i'll take few of the fields like procid,procname,proccast,procsale.
Error: I cant seem to download the file, please check the filename and URL. Web
Exception Error:
System.Net.WebException: The remote server returned an error: (500) Internal Ser
ver Error.
at System.Net.WebClient.File(Uri address, String fileName)
at System.Net.WebClient.File(String address, String fileName)
at Script.Program.Main(String[] args)
but when i checked individually all fields are having data & excution is success.
Hope for the quick solution.
Thankssource file type is .csv. I am using executeprocess task to download the source file..yes its thrown by the executeprocesstassk and through command prompt. all arguments are sitting properly. I checked each and every arguments.
with the same executables i can downloaded few of the flat files.
But for this only I am facing an issue.actually How i am getting an issue is.
for eg flat file having 5 headers. like procid,procname,proccast,procsale,updateddate.
while running the task/from cmd prompt it 'll work fine for procid,procname,proccast. i mean to say getting data. but not getting rest of the 2 fields.
output: procid,procname,proccast,procsale,updateddate only hearders without data.
for some times it's throws an error below if i'll take few of the fields like procid,procname,proccast,procsale.
Error: I cant seem to download the file, please check the filename and URL. Web
Exception Error:
System.Net.WebException: The remote server returned an error: (500) Internal Ser
ver Error.
at System.Net.WebClient.File(Uri address, String fileName)
at System.Net.WebClient.File(String address, String fileName)
at Script.Program.Main(String[] args)
but when i checked individually all fields are having data & excution is success.
Hope for the quick solution.
Thanks -
Generate ADRNR in ABAP code- Getting Error in XD02/XD03
Hi Friends,
I am Creating web-service for Create Customer/Address. I have created RFC for that. Now when I create only Customer and not generating ADRNR, then it works fine, but when I generate ADRNR in Web-service with 'NUMBER_GET_NEXT' and object 'ADRNR'. I can insert the data successfully in all the table, but when I try to open it via XD02/xd03, it give me error like "Error occured in calling ADDR_GET function. Any solutions please?
Thanks in Advance.Hi,
You need to update the language field(LANGU) in ADRC table, if not i will throw the same error. Once check it and update it. -
storage-vdc(config-if)# show module
Mod Ports Module-Type Model Status
2 32 1/10 Gbps Ethernet Module N7K-F132XP-15 ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type Model Status
2 48 1/2/4/8 Gbps FC Module DS-X9248-96K9 ok
4 8 10 Gbps FCoE Module DS-X9708-K9 ok
7 0 Supervisor/Fabric-2a DS-X9530-SF2AK9 active *
8 0 Supervisor/Fabric-2a DS-X9530-SF2AK9 ha-standby
10 22 4x1GE IPS, 18x1/2/4Gbps FC Module DS-X9304-18K9 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
2 5.2(2) 1.1 20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4 5.2(2) 0.107 --
7 5.2(2) 1.8 --
8 5.2(2) 1.8 --
10 5.2(2) 1.3 22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model: DS-X9708-K9
Type (SFP capable): 10Gbase-SR
Speed: 1000,10000
Duplex: full
Trunk encap. type: 802.1Q
Channel: yes
Broadcast suppression: percentage(0-100)
Flowcontrol: rx-(off/on/desired),tx-(off/on/desired)
Rate mode: dedicated
QOS scheduling: rx-(2q4t),tx-(1p3q4t)
CoS rewrite: yes
ToS rewrite: yes
SPAN: yes
UDLD: yes
Link Debounce: yes
Link Debounce Time: yes
MDIX: no
Port Group Members: none
TDR capable: no
FabricPath capable: yes
Port mode: Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
transceiver is present
type is 10Gbase-SR
name is CISCO-FINISAR
part number is FTLX8571D3BCL-CS
revision is C
serial number is FNS12090EMJ
nominal bitrate is 10300 MBit/sec
Link length supported for 50/125um OM2 fiber is 82 m
Link length supported for 50/125um OM3 fiber is 300 m
Link length supported for 62.5/125um fiber is 26 m
cisco id is --
cisco extended id number is 4
SFP Detail Diagnostics Information (internal calibration)
Alarms Warnings
High Low High Low
Temperature 36.21 C 75.00 C -5.00 C 70.00 C 0.00 C
Voltage 3.29 V 3.63 V 2.97 V 3.46 V 3.13 V
Current 8.11 mA 11.80 mA 4.00 mA 10.80 mA 5.00 mA
Tx Power -2.65 dBm 1.49 dBm -11.30 dBm -1.50 dBm -7.30 dBm
Rx Power -2.21 dBm 1.99 dBm -13.97 dBm -1.00 dBm -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warningAnkit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?
Maybe you are looking for
-
How can I disable auto-switching desktops?
I've long appreciated the spaces/mission control feature of OS X. However, it seems more oriented to organizing desktops by application rather than by project. Like many users, I suspect, I use different desktops for different projects, each of which
-
How can I transfer songs from my iPhone without wiping the iPhone?
I have two computers. My original is a basic Dell that's really getting old and the other is a new one I custom built a year ago. My first computer, which I had all my iTunes stuff on, has started dying so I've decided to transfer all my music and iT
-
Post Code : Want to determine the list of Business Partner !!!
Hi all I have given Post Code of BP. I want to determine the <b>list of Business Partner</b> present in the specified <b>Post Code Location</b>. Is their any direct way around to determine the list of Business Partner ? or Please let me know
-
Resultant calculation but result not same
I found one issue when I calculate the Resulatnt from head x, y, z acceleration data when I process the crash test data. one computer XP system the result channel name is : ResultantXYZ, one conputer Win7 system the result channel name is : Res_from
-
Db_checkpoint: Unable to allocate thread control block
Hello, Every second day BDB 4.8 runs out of cache memory (size = 512MB). We have 10 static worker processes (no segfaults) and one db_checkpoint-process (checkpoints once a minute and exists). We use only DB_WRITE_NOSYNC After two days the db_checkpo