While Import support package getting error in R/3
Hi All,
I am getting one error following error while importing support package in R/3.
Open data extraction requests
The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
Can Anybody aware of this error. How do I delete the open data extraction process specified here.
Thx & Regds,
SGK
Hi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK
Similar Messages
-
Error getting while importing support package in R/3
Hi All,
I am getting one error following error while importing support package in R/3.
Open data extraction requests
The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
Can Anybody aware of this error.
Thx & Regds,
SGKHi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK -
Errors while importing support
hello all,
I am getting following errors while importing support
packages Queue SPAMu2026
- Error in phase: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0232
- Error message: connect failed
I have checked the TPPRAM file, RFC connection and
it's normalu2026
I even changed the directory to /usr/sap/trans/bin and
executed command "tp connect <SID>" and same erroru2026
Return code: 0232
Also I tested the connectivity from STMS
RFC Link tp was started successfully
tp Version 340.15.02
DB Connect Link to database failed
Offline Call connect failed
any ideas? any suggestions? I really need help.
Jack LeeDear All:
the error still the same~
I excuted the R3trans -d and came out like below:
C:\Documents and Settings\dbsadm>R3trans -d
This is R3trans version 6.13 (release 640 - 24.04.09 - 13:43:00).
2EETW169 no connect possible: "DBMS = MSSQL --- SERV
ER = 'PRDTEST' DBNAME = 'DBS'"
R3trans finished (0012).
and here is the trans.log:
4 ETW000 R3trans version 6.13 (release 640 - 24.04.09 - 13:43:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 02.07.2005 - 15:36:52
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sat Jul 02 15:36:55 2005 6991 0.006991
4 ETW000 [dev trc ,00000] db_con_init called 65 0.007056
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 183 0.007239
4 ETW000 [dev trc ,00000] Loading DB library 'dbmssslib.dll' ... 51 0.007290
4 ETW000 [dev trc ,00000] load shared library (dbmssslib.dll), hdl 0 1550 0.008840
4 ETW000 [dev trc ,00000] using "C:\usr\sap\DBS\SYS\exe\run\dbmssslib.dll"
4 ETW000 14 0.008854
4 ETW000 [dev trc ,00000] Library 'dbmssslib.dll' loaded 7 0.008861
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbmssslib.dll
4 ETW000 11 0.008872
4 ETW000 [dev trc ,00000] Version of 'dbmssslib.dll' is "640.00", patchlevel (0.266)
4 ETW000 492 0.009364
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbmssslib.dll
4 ETW000 9 0.009373
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbmssslib.dll
4 ETW000 19 0.009392
4 ETW000 [dev trc ,00000] New connection 0 created 75 0.009467
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 40 0.009507
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 36 0.009543
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 10 0.009553
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 14 0.009567
4 ETW000 [dev trc ,00000] Thread ID:2320 3431 0.012998
4 ETW000 [dev trc ,00000] Thank You for using the SLOLEDB-interface 51 0.013049
4 ETW000 [dev trc ,00000] Using dynamic link library 'C:\usr\sap\DBS\SYS\exe\run\dbmssslib.dll'
4 ETW000 37 0.013086
4 ETW000 [dev trc ,00000] dbmssslib.dll patch info 117 0.013203
4 ETW000 [dev trc ,00000] patchlevel 0 112 0.013315
4 ETW000 [dev trc ,00000] patchno 266 8 0.013323
4 ETW000 [dev trc ,00000] patchcomment Batch jobs stay in Ready status (1291921)
4 ETW000 10 0.013333
4 ETW000 [dev trc ,00000] np:(local) connection used on PRDTEST 84 0.013417
4 ETW000 [dev trc ,00000] CopyLocalParameters: dbuser is 'dbo' 9 0.013426
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 12800 0.026226
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 570 0.026796
4 ETW000 [dev trc ,00000] Provider Release:9.00.4035.00 54486 0.081282
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 3456 0.084738
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 311 0.085049
4 ETW000 [dev trc ,00000] i'm dbo but there exists 1 users <> dbo with tables SVERS ==> connect terminated
4 ETW000 8298 0.093347
2EETW169 no connect possible: "DBMS = MSSQL --- SERVER = 'PRDTEST' DBNAME = 'DBS'"
Regards
Jack Lee -
Error while applying support packages
Hi,
I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW, the support package level was 02, I have downloaded 03,04,05,06 for all the above four components. While updating spam/saint update I got the above error, displayed below. But even while applying support packages I got a list of errrors.
1.
Category: Abap programming error
Runtime error: call_function_parm_unknown
CX_SY_DYN_CALL_PARAM_NOT_FOUND
abap program: RSSPAM07
Function parameter "IV_IMP_SCENARIO" in unknown
this first error displayed after applying SPAM/SAINT update.
2. The import was stopped, since an error occured during the phase IMPORT_PROPER, which the support package Manager is unable to resolve without your input
The following details help you to analyse the problem:
Error in phase : IMPROT_PROPER
Reason for error:
Return code:
Error Message:
Please provide any solution as soon as possible....The details of SLOG
START CMDIMPORT NG1 L 20120227162812 SHABZ BasisTrn3 20120227162811973
STOP CMDIMPORT NG1 L 20120227162813 SHABZ BasisTrn3 20120227162811973
START imp all NG1 20120227162821 SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT NG1 H 20120227162822 SHABZ BasisTrn3 20120227162821661
STOP DD IMPORT NG1 H 20120227162839 SHABZ BasisTrn3 20120227162821661
START DD ACTIVATION NG1 A 20120227162839 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 J 20120227162839 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 J 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP DD ACTIVATION NG1 A 20120227162925 SHABZ BasisTrn3 20120227162821661
START DISTRIBUTION OF DD-O NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP DISTRIBUTION OF DD-O NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
INFO TBATG CONVERSION OF NG1 N not needed SHABZ BasisTrn3 20120227162821661
START MOVE NAMETABS NG1 6 20120227162929 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 P 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 P 20120227162935 SHABZ BasisTrn3 20120227162821661
STOP MOVE NAMETABS NG1 6 20120227162936 SHABZ BasisTrn3 20120227162821661
START MAIN IMPORT NG1 I 20120227162936 SHABZ BasisTrn3 20120227162821661
STOP MAIN IMPORT NG1 I 20120227163023 SHABZ BasisTrn3 20120227162821661
START TBATG CREATION OF EN NG1 n 20120227163024 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 Y 20120227163024 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 Y 20120227163034 SHABZ BasisTrn3 20120227162821661
STOP TBATG CREATION OF EN NG1 n 20120227163034 SHABZ BasisTrn3 20120227162821661
START EXECUTION OF REPORTS NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
STOP EXECUTION OF REPORTS NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0004 20120227163203 SHABZ BasisTrn3 20120227162821661
START CMDIMPORT NG1 L 20120227164418 SHABZ BasisTrn3 20120227164416991
STOP CMDIMPORT NG1 L 20120227164454 SHABZ BasisTrn3 20120227164416991
START DD IMPORT NG1 H 20120227165608 SHABZ BasisTrn3 20120227165607479
STOP DD IMPORT NG1 H 20120227170309 SHABZ BasisTrn3 20120227165607479
START DD ACTIVATION NG1 A 20120227170313 SHABZ BasisTrn3
START tp_getprots NG1 J 20120227170313 SHABZ BasisTrn3
STOP tp_getprots NG1 J 20120227171206 SHABZ BasisTrn3
STOP DD ACTIVATION NG1 A 20120227171206 SHABZ BasisTrn3
START imp all NG1 20120227171208 SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 S 20120227171303 SHABZ BasisTrn3 20120227171207614
STOP DISTRIBUTION OF DD-O NG1 S 20120227171304 SHABZ BasisTrn3 20120227171207614
START TBATG CONVERSION OF NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
STOP TBATG CONVERSION OF NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
START MOVE NAMETABS NG1 6 20120227171307 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 P 20120227171308 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 P 20120227171755 SHABZ BasisTrn3 20120227171207614
STOP MOVE NAMETABS NG1 6 20120227171755 SHABZ BasisTrn3 20120227171207614
START MAIN IMPORT NG1 I 20120227171756 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP MAIN IMPORT NG1 I 20120227195335 SHABZ BasisTrn3 20120227171207614
START TBATG CREATION OF EN NG1 n 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
START tp_getprots NG1 Y 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP tp_getprots NG1 Y 20120227195521 SHABZ BasisTrn3 20120227171207614
STOP TBATG CREATION OF EN NG1 n 20120227195521 SHABZ BasisTrn3 20120227171207614
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0903 20120227195522 SHABZ BasisTrn3 20120227171207614 -
DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0
Hi Gurus,
I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
Can you please help to reset the queue and implementing this support package.
Thank you,
Regards,
GaneshPaste the SPAM log here.
Regards,
Nick Loy -
RSM2052 error after import Support Package SAPKW70022 in MSSQL Data Load
Hi;
I imported Support Package SAPKW70022 but after import data load from MSSQL gives error RSM2052.
How can I solve my problem.
Best Regards.Hi,
I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
Thx & Regds,
SGK -
Error in xpras when importing support packages in solution manager
Hello,
We are importing support packages in our solution manager and we begun
the process more than two weeks ago and the process is still running.
I have stopped the system and restarted the import again, but it seems
to be the same. The SP queue is:
SAPK-1507EINSTPL
SAPK-1507FINSTPL
SAPK-1507GINSTPL
SAPK-1507HINSTPL
SAPK-1507IINSTPL
SAPK-1507JINSTPL
SAPKB70015
SAPKA70015
SAPKITL426
SAPKIPYJ7F
SAPKW70017
SAPKU50012
SAPKB70016
SAPKA70016
SAPKITL427
SAPKIBIIP9
SAPK-40012INCPRXRPM
SAPK-40013INCPRXRPM
SAPK-40014INCPRXRPM
SAPKNA7012
SAPKNA7013
and there is an error (rc=12) at the method execution step in package SAPKU50012 or in SAPKB70016.
Now, there is an rc 12, but the queue is running, the import queue hasn't cancelled, but it seems to do nothing. The RDDEXECL job log is:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server crosol203 were synchronized
Error Building the ENH TreeObject Type:XHObject Name:EH_FJ_FUBA_PARA_VERS
the job was running for 149.332 seconds and at that moment I stopped the sap system. After restating the system I imported the queue again and now, the process has been running for more than 13500 seconds.
We have checked note number 1142410 and all the modifications were already implemented in the system.
Thanks and best regards,
Ana.Hello Sunny,
The problem is still happening. I have read and apply all the threads you suggested, nut they didn't resolve the problem:
I have updated the kernel
I have checked table DRSEG and it has no problems.
I don't have any syntax errors so I haven't run the SGEN as I think it doesn't apply.
After changing the kernel I have started the sap system and the job rddexecl has started itself before running again the SPAM and reimporting the queue.
I already have 6 support packages without running the method execution step and I don't know how much time it will consume.
Regards,
Ana -
Import support package SAPKB70015 at PI System is stuck on IMPORT_PROPER
Dear Expert,
I have some problem when import support package SAPKB70015 at PI System.
IT had shown as below.
Main import
Transport request : SAPKB70015
System : CXI
tp path : tp
Version and release: 372.04.08 700
sap_dext called with msgnr 4:
db call info
function: db_report_interface
fcode: UPDATE_REPORT
tabname: TEXT
len (char): 40
key: /OSP/CL_CJS_CONTEXT===========CP
retcode: 4
Main import
End date and time : 20081120021353
Ended with return code: ===> 12 <===
And I checked the transport log,It shown as below.
4 ETW690 COMMIT "360444" "53156878"
3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
4 ETW000 1 entry for TADIR updated (R3TRCLAS/OSP/CL_CJS_CONTEXT ).
4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP A replaced.
4 ETW000 dev trc ,00000 Thu Nov 20 02:13:53 2008 39924798 39.924798
4 ETW000 http://dbsloci. ,00000 *** ERROR => Cannot update a LOB column for more than one row piecewise
4 ETW000 85 39.924883
4 ETW000 dev trc ,00000 sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
e=REPOTEXT
4 ETW000 66 39.924949
4 ETW000 dev trc ,00000 prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
4 ETW000 53 39.925002
4 ETW000 dev trc ,00000 IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
0a4220,vda_p=0x111e21a60
4 ETW000 58 39.925060
4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
4 ETW000 48 39.925108
4 ETW000 dev trc ,00000 OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
11e222c0
4 ETW000 55 39.925163
4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
4 ETW000 47 39.925210
4 ETW000 dev trc ,00000 UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
4 ETW000 51 39.925261
4 ETW000 dev trc ,00000 RETURNING "DATA" INTO :A4; 29 39.925290
4 ETW000 dbrepolo ,00735 ***LOG BZY=>unexpected return code 2 calling dbrepolo#? @ 735
4 ETW000 75 39.925365
2EETW000 sap_dext called with msgnr "4":
2EETW000 -
db call info -
2EETW000 function: db_report_interface
2EETW000 fcode: UPDATE_REPORT
2EETW000 tabname: TEXT
2EETW000 len (char): 40
2EETW000 key: /OSP/CL_CJS_CONTEXT===========CP
2EETW000 retcode: 4
1 ETP154 MAIN IMPORT
1 ETP110 end date and time : "20081120021353"
1 ETP111 exit code : "12"
1 ETP199 ######################################
System information
SAP = NW2004s SR3
Database = Oracle 10.2.0.2
OS versions = AIX 5.3
Tp version = 700 Unicode 179
R3trans version = 700 Unicode 183
PS.I checked tp connect return code 0 and R3trans u2013s return code 0
Could you please suggest how to fix this problem?
Thank you very much
JaturongIu2019ve updated database statistics and then try to reimport the package again. But It canu2019t import package.
Are you still getting the same error after you retry the statistics update? -
Sapinst import support package 19
Hi,
While I am doing import support package 19 though sapinst below error is occuring:
ERROR 2007-06-15 03:34:44
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-06-15 03:34:44
MUT-02041 SDM call of deploySdaList ends with returncode 4. See output of logfile
/tmp/sapinst_instdir/PATCH/ORA/callSdmViaSapinst.log.
Lofile error:
Error: Exception occured during extractSingleFile: /usr
/sap/GXI/DVEBMGS00/SDM/root/origin/sap.com/tc/eCATTPing/SAP AG/1/6.4019.00.0000.
20041104140331.0000/eCATTPing.sda (Permission denied)
Can some one help me in this regard
Best RegardsHello,
There are a coupel of things I would suggest checking here. From the logs I assuem that you are installing on a Unix system, what user are you calling sapisnt with? Is it the root user? Please also ensure that 777 permissions exist on the directories in question, and that the file itself is not corrumpted.
Regards,
David -
How to deal with delta queue when importing Support Package/Kernel Patch
Hi,
From my experience, when importing a Support Package for an installation, the system will issue an error message and get stuck if this Support Package is about to alter the structures used in delta loads.
But I would like to double with you if there is possible that the support packet which is going to alter structure, but no error message. If so, the delta data will be lost.
Do we need to clear down the delta queue every time we import support package?
Anyway, is there anyone have any suggestions or steps regarding this question?
Many Thanks
JonathanHi,
Delta queues during support package upgrade
Its always better to drain the delta queues before an upgrade.
As a standard practice we drain the delta queues by running the IP/ chain multiple times.
As a prerequiste we cancel/reschedule the V3 jobs to a future date during this activity.
The V3 extraction delta queues must be emptied prior to the upgrade to avoid any possible data loss.
V3 collector jobs should be suspended for the duration of the upgrade.
They can be rescheduled after re-activation of the source systems upon completion of the upgrade.
See SAP Notes 506694 and 658992 for more details.
Page 17
Load and Empty all Data mart Delta Queues in SAP BW. (e.g. for all export DataSources)
The SAP BW Service SAPI, which is used for internal and BW to BW data mart extraction, is
upgraded during the SAP BW upgrade. Therefore, the delta queues must be emptied prior to the
upgrade to avoid any possibility of data loss.
upgrade preparation and postupgrade checklist
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
/message/3221895#3221895
OSS notes 328181 and 762951 as a prerequisites.
Failure to follow the instructions in those notes may probably result in data loss.
https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002662832005E
/thread/804820
Effect on BW of R/3 Upgrade
How To Tackle Upgrades to SAP ERP 6.0
/people/community.user/blog/2008/03/20/how-to-tackle-upgrades-to-sap-erp-60
Start with the Why Not the How When You Upgrade to SAP ERP 6.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/008dddd1-8775-2a10-ce97-f90b2ded0280
Rapid SAP NetWeaver 7.0 BI Technical Upgrade
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c9c8be-346f-2a10-2081-cd99177c1fb9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2b3a272-0b01-0010-b484-8fc7c068975e
Hope this helps.
Thanks,
JituK -
Import support package SAPKB70015. Is stuck in IMPORT_PROPER phase
Dear Expert,
I have some problem when import support package SAPKB70015 at PI System.
IT had shown as below.
Main import
Transport request : SAPKB70015
System : CXI
tp path : tp
Version and release: 372.04.08 700
sap_dext called with msgnr 4:
db call info
function: db_report_interface
fcode: UPDATE_REPORT
tabname: TEXT
len (char): 40
key: /OSP/CL_CJS_CONTEXT===========CP
retcode: 4
Main import
End date and time : 20081120021353
Ended with return code: ===> 12 <===
And I checked the transport log,It shown as below.
4 ETW690 COMMIT "360444" "53156878"
3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
4 ETW000 1 entry for TADIR updated (R3TRCLAS/OSP/CL_CJS_CONTEXT ).
4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP A replaced.
4 ETW000 [dev trc ,00000] Thu Nov 20 02:13:53 2008 39924798 39.924798
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot update a LOB column for more than one row piecewise
4 ETW000 85 39.924883
4 ETW000 [dev trc ,00000] sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
e=REPOTEXT
4 ETW000 66 39.924949
4 ETW000 [dev trc ,00000] prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
4 ETW000 53 39.925002
4 ETW000 [dev trc ,00000] IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
0a4220,vda_p=0x111e21a60
4 ETW000 58 39.925060
4 ETW000 [dev trc ,00000] lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
4 ETW000 48 39.925108
4 ETW000 [dev trc ,00000] OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
11e222c0
4 ETW000 55 39.925163
4 ETW000 [dev trc ,00000] lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
4 ETW000 47 39.925210
4 ETW000 [dev trc ,00000] UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
4 ETW000 51 39.925261
4 ETW000 [dev trc ,00000] RETURNING "DATA" INTO :A4; 29 39.925290
4 ETW000 [dbrepolo ,00735] ***LOG BZY=>unexpected return code 2 calling [dbrepolo#? @ 735]
4 ETW000 75 39.925365
2EETW000 sap_dext called with msgnr "4":
2EETW000 -
db call info -
2EETW000 function: db_report_interface
2EETW000 fcode: UPDATE_REPORT
2EETW000 tabname: TEXT
2EETW000 len (char): 40
2EETW000 key: /OSP/CL_CJS_CONTEXT===========CP
2EETW000 retcode: 4
1 ETP154 MAIN IMPORT
1 ETP110 end date and time : "20081120021353"
1 ETP111 exit code : "12"
1 ETP199 ######################################
System information
SAP = NW2004s SR3
Database = Oracle 10.2.0.2
OS versions = AIX 5.3
Tp version = 700 Unicode 179
R3trans version = 700 Unicode 183
PS.I checked tp connect return code 0 and R3trans u2013s return code 0
Could you please suggest how to fix this problem?
Thank you very much
JaturongHello Karthik
I know the list is long. Unfortunately I have never had such a long list of inactive objects in the system during an update or upgrade. But I believe you can make use of the mass activation program RADMASG0 to have them activated. The other option I can think of is to use the function module RS_INACTIVE_OBJECTS_LIST to list all the inactive objects and see whether they can be mass activated from there. I believe it is possible to activate all from there after selecting a block. (Never tried so I cannot guarantee).
Regards
RB -
How to import Support Package 13(SAPKW70013) for SAP NetWeaver 2004s BI
Hi,
How to import Support Package 13 for SAP NetWeaver 2004s BI (BI Patch 13 or SAPKW70013)
Note no for that is : 1019055.
Thanks in Adavance,
Dushyant.Hi,
RTC for BI 7.0 SAP_BW SP 13 is scheduled in CW 21, that is coming week, after that you should be able to download it from service market place.
@others: Dont get confused about SPS release with SP release. BI has intermediate release which is SP release, SPS is SP-Stack release (which is NetWeaver release).
SP 12 correspond to SPS 12 which is sceduled CW 21.
Hope this helps.
Best Regards,
Rajani -
While importing Deski document getting message box as universe is not found
While importing Deski document getting message box as universe is not found. How to suppress the messagebox and import the document. using BO .net sdk.
So is the Universe there?
Sincerely,
Ted Ueda -
While doing vl03n i get error balancing field profit center missing
while doing vl03n i get error balancing field profit center missing in line item 001
Hi,
Please check whether the Inheritance option is selection while activating the document splitting.
SPRO> Financial Accounting (New) > GL Accounting (New) > Business Transaction > DOcument Splitting > Activate Document Splitting
Regards,
SDNer -
ihave ipod 4g and my ios is 4.3.3 and i want to update or restore it to ios 5 or 6 and my itunes version is 10.6 and i am using window 7 home premium. while restoring i am getting error 3194,1600,1601,1602,1603,1604. How to fix these error..... can you please help me
See the actions for those errors located here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Maybe you are looking for
-
Background Job Not Reconnected After Offline Backup.
Hi all, Background jobs which are scheduled before Databse Offline Backup are always cancelled. Reconnect WP does not happen even if following parameters are set. We had set profile parameters in all Application Server like rsdb/reco_trials = 15
-
I can use Alt+D to get to the Location Bar to type in a URL, but is there a way I can then go to the default text box, to enter data, once the search engine page has been opened, by using a short-cut key? I didn't recognize any of the commands in the
-
Case Insensitive Search for the Dashboard Prompt Filter
Hi, Can anyone help me, how to make dashboard propmt filter to be case insensitive, as of now dashboard propmts are case sensitive by default. How can we achieve this? Any help on this will be appreciated. TIA
-
Photos in collections not showing up when viewed from a higher level
I am using Lightroom 3.2 and have many collections and collection sets. Recently I moved a bunch of my collection sets inside another collection set to better organize things, but when I did the images in the moved collections no longer show up when
-
Streaming HDTV media through E4200 to TV
Hi all. Basically the problem is that the HD media steamed through the E4200 router has a significant lag on the TV. So details.. I have the Linksys E4200 wifi router and want to stream the HD video from my computer to TV. The connection schema is pr