While importing clip getting error "The file contains too many audio channels" in premiere pro cs5

Hey,
I  am using video clips from sony digital hi8 camera and trying to import  video clips (.mov) 720*480  fps 29.97 .But unable to get into premiere  pro cs5.System configuration:
MAC 10.6.4
2.66ghz intel core i7
4gb ram
nvidia geforce gt 330 mn.
Error :
Actually ,i have checked the inspector panel and i found same infomation in
in this panel for both clips .please check these clips screen shoots seprately .
Actually i have a long video clip and i have scatterred this clip into 6 diffrent portions
where i am not able to import the last video clip.It is giving me same error "file contain too many audio channels"".
Regards
Manoj

I too am getting this error in Premiere CS5.  I was digitizing a Broadcast VHS and since I did not have a breakout box, I hooked it up to a Sony DV deck so I could connect via firewire and capture inside Premiere.  I was able to capture and import 1 of the 3 clips and it did have 4 audio channels attached to it.  However, upon closer inspection only 2 channels had a waveform.  I captured the other 2 clips the same way, but this time, Premiere give the error "The file contains too many audio channels." 
Any ideas?

Similar Messages

  • File won't import due to 'Too many audio channels'

    I've managered to import one 30 minute video recorded off a screen recording program off the AppStore called ScreenRecordStd. This software has an 'include computer audio' button which I activated after the first 30 minute video.
    Once trying to import any videos with this selection activated they won't import, telling me there are too many audio channels.. so I know it is due to this selection. The file information tells me I have two AAC 44100 Hz Stereo files as part of the video, when I change it to mp4 or h264 file formats it does import but the video/audio are not in sync when played through on Premiere Pro but are totally fine in QuickTime player.. also the second audio channel is a lot quieter when being played through on Premiere Pro than in QuickTime.
    So, I hoping someone has came across this software or this problem and can help me. So I have two 44100 Hz stereo files within the video and the selection I am using says it can take up to three stereo files, so why is it telling me it can't import because there's too many audio channels??? I've tried changing the video to h.264, mp4 and they just struggle with the video being too slow and avi. just has the same issues as .mov.
    Can anyone help?
    Thank you.

    Why do you convert the media to start with? Are you aware of that you are converting the camera's MPEG2 to the MPEG2 you get when creating the new MXF file? (XDCAM HD = MPEG2)
    I would never ever re-compress/convert the already-in-camera-compressed MPEG2 to compressed MPEG2 for editing and then having it to end up in let's say either MPEG2-DVD or H.264. You loose one generation and i would not want to lose it by re-encoding to MPEG2 since, imo, re-encodong MPEG2 to MPEG2 should be avoided. (MPEG2 to MPEG2 = The quality is degraded too much) If you still want to re-encode the footage i would use another codec, DNxHD/CineForm/Lagarith. (Pick your favorite)
    You can use the MXF files from Canon XF Utility in CS6. (The files MXF are just copied from the original folder structure, so no re-encoding is done.)
    AFAIK, the problems with tearing video go away by using the MXF files you get from XF Utility. If the tearing is still present, close Pr and delete all Cache files. Open Pr and let the Generating Peak file finish.
    AFAIK 8 audio channels are standard in MXF OP1a according to SMPTE D10.
    /Roger

  • Error MDX result contains too many cells (more than 1 million). (WIS 10901)

    Hi,
    We have developed an universe on BI query and developed report on it. But while running this BO query in Web Intelligence we get the following error
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData.  MDX result contains too many cells (more than 1 million). (WIS 10901)
    This BO query is restricted for one document number.
    Now when i check in the BI cube there are not more than 300-400 records for that document number.
    If i restrict the BO query for document number, delivery number, material and acknowledged date then the query runs successfully.
    Can anyone please help with this issue.

    follow this article to get the mdx generated by the webi report.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90b02218-d909-2e10-1988-a2ca74547900
    then try to execute the same in mdxtest transaction in bw

  • Help! Getting error "The file could not be written" when exporting

    When I attempt to export a group of approximately 50 photos from LR4, a window opens at the end of the process saying "The file could not be written" along with a list of approximately 10-15 NEF file names.  I have never had a problem exporting before, but I recently started storing my LR catalog and files on an external USB 3.0 drive.  I'm looking for any suggestions!
    Here are the details:
    LR4 with latest updates
    Win 7 with latest updates
    LR catalog and photo files stored on external USB 3.0 G: drive
    Trying to export to a folder on my desktop on C: drive (46GB free out of 134GB, solid state drive)
    LR files are NEF, exported files are JPG
    I've tried to export to the same group of photos multiple times with different names and different output file sizes (8MB, 5MB, 2MB).  Each time the list of failures is different.
    Some of the thumbnails which appear in Windows Explorer are corrupted (part of the thumbnail is gray)
    When I try to export the same group of photos to the external USB 3.0, it works perfectly!
    Here is an example of one of the LR log files:
    The file could not be written. (17)
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1915.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1918.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1919.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1939.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1948.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1958.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1961.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1964.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1968.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1971.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1972.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1973.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1978.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1983.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1986.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1989.NEF
        G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1990.NEF

    http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=%22file+could+not+be+written%22

  • Keep getting error:the file is damaged and cannot be repaired when i try to go into a web page

    i am trying to go to a web page and keep getting an error

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • Verizon data connectivity problem the page contains too many server redirects

    I work at a bank and literally Everyone on the Verizon network with an Android OS phone is getting this error when they try going to our website through the phone browser but it only pops up the rror after trying to login.  we have done difinitive testing that this is not occuring to any AT&T phones or black berry.  and it also is not happening with the Verizon Iphone.  Its soley an android issue that we can tell.    It just in the last week or so started doing this.  it had been working fine the last  few months.  Rebooting the phoen does not work.  clearing the browser cookies and cache and history does not work.  any legitimate ideas on what is causing this would be appreciated.  All things indicate an issue within the Android OS and its browser..

    Verizon Wireless Customer Support        Aug 1, 2012 3:36 PM                                    (in response to bgleas)               
    Currently Being Moderated               
    Bgleas, thank you for sharing your issue as well. When other people send you text messages, do they receive any errors that it was not sent? Is this happening with numbers from a certain carrier? Try clearing your text threads and also clearing cache from messaging. Settings, Applications, Manage Applications, All, Messaging, Clear data/cache. Let me know your results.
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport
    I JUST FOLLOWED THESE INSTRUCTIONS, ONLY INSTEAD OF CLEARING OUT THE MESSAGING, I CLEARED THE BROWSER!  IT WORKED.  THE ERROR MESSAGE IS GONE, AND NOW THE BROWSER IS WORKING AGAIN 

  • The file contains file info data which cannot be read and has been ignored

    We have been sending images out to contractors, and sometimes when they come back the files are having this error:
    the file contains file info data which cannot be read and has been ignored
    When I then try to Photoshop Script the file info it throws errors.  Does anyone know what causes this error to happen?
    Thank you

    ok, Thanks!, BUT here's the bigger issue:
    We use a lot of Photoshop Scripting, and the file info is how we direct all of our workflows.  when a file comes back with "the file contains file info data which cannot be read and has been ignored" error, the scripts are unable to read/write to any of the file info ever again.  So not only did we lose all the info already in the file, but we can't use the file at all after this.
    Additonally, we tried copying and pasting to new blank documents, but realized we needed all the paths, channels, and sampler points too.
    Is there anything anyone can think of to get around this probelm?  A setting, or a program to fix the metadata, etc?
    Thanks!!!

  • Importing .mts AVCHD video into Premiere Pro CS5.5, HELP!

    Hello,
    I am new on Adobe forums and I nedd a question answered.
    I have seen that there is no definite answer on how to import .mts files from my Canon Vixia HFR20 to Premiere Pro CS5.5.
    I get "The file has an unsupported compression type" message. For now I convert the videos to .AVI but i would why would I continuosly convert them?
    I bought the camera mainly for the HD, so help soon would be greatly appreciated!
    Thanks in Advance,
    Ethan
    P.S: I have a PC to put that in mind...

    Post a screen cap of what presets you have.
    Maybe you have gotten the revert to trial bug and lost your options to play these files since they dont play in the trial version.
    Here is what mine look like.
    Here is the Properties of the file you uploaded.
    And here is what sequence that was created when dragging to the New Item button.
    See if you have the same options.
    GLenn

  • Audio problems when exporting files from Premiere Pro CS5

    I try to post in English.
    I have audio problems in Premiere Pro CS5 when exporting a film.
    I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
    When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
    The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
    Thanks for answers
    Frieder

    Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

  • I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to download itunes, can someone help me with this?

    I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to install itunes.  Can anybody help me to resolve this issue?

    You can try disabling the computer's antivirus and firewall during the download the iTunes installation
    Also try posting in the iTunes forum since it is not an iPod touch problem.

  • When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

    When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Trying to update to iTunes 10.4.1 and I get a message "A network error occured while attempting to read from the file C:|Windows|Installer|iTunes.msi"  Running WIndows 7 with all updates done.  I  have never had an issue with iTunes updating before.  Anyo

    iTunes has tried to update itself and runs into an error and tells me to manually install.  When I d/l and run the iTunesSetup.exe file I always encounter the following error message...
    "A network error occured while attempting to read from the file C;|Windows|Installer|iTunes.msi" and iTunes does not update to iTunes 10.4.1.
    Anyone know what is creating this error message?  Thanks for the help...

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page): 
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the  Live Cycle Installer.Can any one help me on resolving this issue it would be of g

    Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the  Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .

    I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating.  I
    could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
    The listed registry key does not exist
    Expand HKEY_LOCAL_MACHINE. 
    Click down the key path: 
       "System\CurrentControlSet\Services\NtFrs\Parameters" 
    Double click on the value name 
       "Enable Journal Wrap Automatic Restore" 
     

  • While updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page): 
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error: Cannot display file. The file contains 0 bytes

    Hi,
    I am getting the below error when accessing a a document using Autovue from Documentum:
    "Error: Cannot display file. The file contains 0 bytes"
    Please note, autovue server is up and running and I get the below when accessing: http://WebserverName:7002/VueServlet/servlet/VueServlet
    Oracle AutoVue
    VueServlet for AutoVue 20.2.2 Build: 8633 (2013-08-21)
    Servlet tunneling to server[0] (IP=xxx.xxx.xxx.xxx)
    Connection state: OK
    AutoVue server is up and running.
    Build: 8633 (2013-08-21)
    Server Load:
    Server: farm-server[0] (xxx.xxx.xxx.xxx:xxx) Processors: 2
    I hope to hear from someone soon!
    Cheers

    That means that you documentum integration is not working properly
    you will need to debug the integration you are using and attach logs for the server, integration servlet (VueLink for documentum, which version?)
    Please review the KB, there are items associated with it
    Oracle AutoVue VueLink for Documentum Troubleshooting Center(Doc ID 1348153.1)

Maybe you are looking for

  • Upload data from Excel to Internal table

    Hi, I am facing a peculiar problem in uploading the data in excel sheet to internal table. The excel file contains material number and product hierarchy number. The product hierarchy number for some material is downloaded as 5.73101E17 for the value

  • My e-mails do not appear in Mail on my MacBook Pro

    For the last week my incoming mails on my iCloud account does not appear in Mail on my MacBook Pro.  E-mails appear as normal on my iCloud and iPhone. I have logged out of iCloud on my Mac and logged on again, still the same problem. Any advice anyon

  • Ipod Touch 3G no longer plays clock alarm sounds and just pauses and shows alarm messages.

    All of a sudden, I am no longer able to hear clock alarm sounds like I used to.  Until recently, I was able to just play a music file, set the clock alarm with any sound from the selection while being able to preview the sound before I saved it, and

  • Open New Browser

    I'm trying to open a new window similar to Netfix's. Where a new window opens and the original window fades in the background. Thanks

  • Journal Voucher printout

    Hello All, can any body tell me where can i take JV print out. Thanks Murali