While initializing delta

Hello
i have the followig error when i want to initialize delta for my info pakage:
Could not determine BW release of logical system 'BWXXXX'
can anyone tell me what it means?
Regards

Hi,
It is beeter to contact basis team first and then work on it once you get the clear details from basis people.
Regards,
Raghavendra Rao.kolli

Similar Messages

Request is failing while Initializing delta(without data)

I am facing this error while Initializing delta load. pls provide me the solution.
Request REQU_3X0SE4NMKVSV8RHYUF24SL4UB(207,922) has not or not correctly been updated; Please edit.
Activation of data records from ODS object YF_O47 terminated.
Request REQU_3X0SE4NMKVSV8RHYUF24SL4UB(207,922) has not or not correctly been updated; Please edit
Message no. RSM096
Diagnosis
Request REQU_3X0SE4NMKVSV8RHYUF24SL4UB (207,922) for DataSource 8ZMXAPO03 from source system BW2-021 has the status (green) and a smaller SID (is thus older) than the request that you currently want to update into the ODS object.
System response
This is not possible since the sequence of the requests must be kept when wanting to update them into an ODS object. Delta- and init. requests must be updated into the ODS in the request sequence.
Procedure
First update request REQU_3X0SE4NMKVSV8RHYUF24SL4UB(207,922) for DataSource 8ZMXAPO03 from source system BW2-021 from the PSA into ODS object.
If you do not need the data in request REQU_3X0SE4NMKVSV8RHYUF24SL4UB (207,922) in the ODS object, you can also set the total status for this request to (red) in the Monitor, on theStatus tab page. When checking for completeness, the system then ignores the request.
Thanks in advance
Raghavendra Rao kolli.

There is old request REQU_3X0SE4NMKVSV8RHYUF24SL4UB not being deleted and causing the problem.
GO TO PSA tree of this infosource and delete the request.
Also DO you need any data already avilable in the ODS ?
If not required delete all psa data from psa tree.
Gopi

Error while doing DELTA Extraction

Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails With the same error
Please let me know how can I resolve this problem.
URGENT
gaurav

I dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working.

Error while doing DELTA Extraction (generic data source)

Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails.
With the same error
Please let me know how can I resolve this problem.
URGENT
gaurav

I dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working.

Error while initiating travel form (Messge No.: 56568)

Hi,
Am facing the below error while simulating in T-Code: PR05:
Error while initiating travel form (Messge No.: 56568)
Kinldy guide me to come out of this error:
Regards
JS

Hi Ray,
Could you please let me know the config for this feature TRVFO as Abode form is not showing up in PR05 it gives the HTML format....
I have done the basic config of the position 24 to Abode form active also checked the Table TA20SWITCH with the entry 'HTMLFORM_R_P', value 'X'
Kindly assist.
Thanks,
FF

TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error while initiating Travel Form

I received the error 'Error while initiating form' in Travel Expense. It is linked to Message no. 56568. Does anyone know how I can fix this? I currently do not have access to OSS Note.
Thanks.

Hi,
It seems to be a config issue.
If you don't use Adobe but ABAP Forms check/change one of:
1) the customizing in the IMG activity "Travel Expenses Control (Expert View)":
Set the indicator "Other Settlement" in the column 24 for the appropriate trip provision variant to the value: 0 (active), 1 (not active), 2 (not active only in PR05 and PR04)
or
2) the data in the table V_T702N_A - double click your variant on "Accounting Control in Expert View:Overview" screen and change the value as above on Deails screen.
Solution taken from (and checked with ECC 6.0 SP9):
PR05 - Error while initiating travel form
and
http://sap.ittoolbox.com/groups/technical-functional/sap-hr/error-when-simulating-result-in-travel-management-1622499
Let us know whether it helps.
Regards,
Przemek

Selection condition in the infopackage for initializing delta

How does the selection condition in the infopackage help in initializing delta?

Hi,
You can enter multiple single valus for any field in the infopackage. Just select the row for material type and then click on the insert duplicate button ( + sign ) which is at the bottom letf hand side in the 'Data Selection' tab within the infopackage. You will usually find this 'insert duplicate' icon next to the 'Check' push button.
You can insert as many rows as you want for material type by select the material type rown and clicking on this icon. You can then enter the three values in the three rows for material type.
Regards,
Shilpa

Could not initialize variable. An error occurs while initializing BPEL .

I have the following error:
**Could not initialize variable. An error occurs while initializing BPEL variable inputVariable; the schema processor cannot find the element {http://xmlns.oracle.com/MRTApplicationWorkflow/Project1/BPELProcess1}processRequest in the following schemas: oracle.fabric.common.wsdl.SchemaManager@e92e05. The XSD element on which the variable was based was not properly defined in XSD or the WSDL. Ensure that the element named in the error message is valid in the XSD or the WSDL.**
My process input xsd below:
<?xml version="1.0" encoding="UTF-8"?>
<schema attributeFormDefault="unqualified"
 elementFormDefault="qualified"
 targetNamespace="http://xmlns.oracle.com/MRTApplicationWorkflow/Project1/BPELProcess1"
 xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:q1="http://schemas.datacontract.org/2004/07/WM.Services.MRTPortfolioService.BusinessObjects">
<import schemaLocation="MRTWorkflowService.svc_xsd_xsd2.xsd"
namespace="http://schemas.datacontract.org/2004/07/WM.Services.MRTPortfolioService.BusinessObjects"/>
<element name="processRequest">
 <complexType>
 <sequence>
 <element name="institutionid" type="int" />
<element name="brokerid" type="long"/>
<element name="accountid" type="string"/>
 </sequence>
 </complexType>
 </element>
 <element name="processResponse">
 <complexType>
 <sequence>
 <element name="result" type="q1:ArrayOfMRTProposedOrder"
/>
 </sequence>
 </complexType>
 </element>
</schema>
Please help me with this isssue.
I am using BPEL 2.0.

Please check your XSD and dependant XSD's whether it contains any special characters.
I solved the same issue in my BPEL process by commenting the special characters included in <documentation> element of XSD.

Error Occured while initializing 2LIS_03_BX datasource.

Hi Experts,
I have enhanced characteristics and key figures to 2LIS_03_BF datasource. Now i am getting Error:"Inactive enhancement for BW extraction. Extraction not possible"
while initializing Stock for 2LIS_03_BX in T-Code:MCNB.
Is there any settings do i need to do, before performing this action?
Valuable answers will be rewarded with points.
Thanks in advance,
Rafi

Hi Oscar,
Thanks for quick response. I can see 2LIS_03_BX in RSA6. Also i have activated the extract structure again.
Still i am getting the same error.
(I have enhanced characteristics and key figures to 2LIS_03_BF and have found that the system by default appended those characteristics and key figures to 2LIS_03_BX).
Could anybody please provide me the valuable suggestion.
Thanks in advance,
Rafi

I was upgrading my iPad with the new OS software and it froze up while initializing. How do I unfreeze it?

I was upgrading my iPad 3 with the new OS 8 software and it froze up while initializing. How do I unfreeze it?

What screen is it frozen on?
~Lyssa

Essbase 11.1.2.1 configuration error " Error while initializing registry."

I have installed Essabase 11.1.2.1 components successfully in linux(RHEL 5) and while configuring the shared services first time getting the error :Error while initializing registry. unable to navigate from registry wizard state"
In the configtool log I found the below exeptions and errors:
[2011-12-28T13:05:48.798-05:00] [EPMCFG] [TRACE] [EPMCFG-01857] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] Creating a new registry: DBtype is ORACLE
[2011-12-28T13:05:48.798-05:00] [EPMCFG] [TRACE] [EPMCFG-01858] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] JDBC URL: jdbc:oracle:thin:@devdwdb.newcorp.com:1531:DEVDW
[2011-12-28T13:05:48.803-05:00] [EPMCFG] [TRACE] [EPMCFG-01319] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating system component: component type = SYSTEM9
[2011-12-28T13:05:49.014-05:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = FOUNDATION_SERVICES_PRODUCT
[2011-12-28T13:05:49.025-05:00] [EPMCFG] [TRACE] [EPMCFG-01323] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating Registry database connection component: component type = DATABASE_CONN
[2011-12-28T13:05:49.040-05:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = SHARED_SERVICES_PRODUCT
[2011-12-28T13:05:49.129-05:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Error:[[
com.hyperion.hit.wizard.FailedButRetryPossibleException: Error while initializing registry.
     at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:394)
     at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:515)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.NullPointerException
     at com.hyperion.config.document.Storage.setLink(Storage.java:398)
     at com.hyperion.cis.config.ConfigRegistryUtils.createProductComponent(ConfigRegistryUtils.java:81)
     at com.hyperion.cis.config.ConfigRegistryUtils.initializeRegistry(ConfigRegistryUtils.java:419)
     at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:277)
Here I am wondering that I have installed and configure successfully in dev environment with the same DB privileges and folder permissions,as well same character set details and the same install files every thing is same as dev environment, but the same approach is failing in prod environment.
I am unable to figure out what exactly issue is,
Can any one please help me out in this regard.
Edited by: 900598 on Dec 29, 2011 11:48 PM

Hi John,
We are using the different schemas(ESHSRVC for dev and ESHSRVC4 for prod)and different user ids as well in the db server( devdwdb.newcorp.com:1531:DEVDW)
where the DEVDW is the sid for both schemas.
Here the HSS tables created in ESHSRVC and working fine for dev.
but in the new installation and config with the ESHSRVC4 schema the config is failing and throwing the error msg..
I am sure the new installation is not pointing to the old HSS populated schema(ESHSRVC) and I have given the connection details of ESHSRVC4(new schema) while config the shared services for new one.
I cross checked the both schema's have the same privileges and character sets.
but in the new config with new schema is unable to create the registry and throwing error.
I have uninstalled and deleted the entire folder and created new schema's and started the new install and config still getting same error.
.

Error 11 while initializing OS dependent part.

Hello Experts,
I am trying to upgrade SPAM level from Support package manager - version 6.20/0035 to 36 level.
I have checked the TP version and updated.
Virtual memory is also sufficient.
I had revert the SPAM and tried
ATT & PAT files are extracted.
Am unable to add the parameter em/max_address = 72000000.(When II add this parameter am getting unknown parameter).
At present am in Import phase 'IMPORT_PROPERu2019 and cancelled SAPnamestabs job also.
Background workprocess log files:
X *** Error 11 while initializing OS dependent part.
M *** ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 8542]
M *** ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 8481]
M *** DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
X *** ERROR => <EsNT> PreReserved Address Space Inconsistency between DP and WP (44200000 - 51B20000) [esnti.c 506]
X *** ERROR => <EsNT> Block 0/512 VirtualAlloc error= 487 [esnti.c 2469]
All virtual address regions
ACTION log of the queue :
Import phase 'IMPORT_PROPER' (16.08.2010, 18:51:12)
Error during executing the tp command 'tp IMPORT all DEV ...'
Interrupt the import due to an error situation (16.08.2010, 18:57:58)
Display detailed informations concerning the error in phase 'IMPORT_PROPER'
Abort the import due to an error situation (16.08.2010, 18:59:29)
Please find the system details as below:
SAP R/3 Kernel information
SAP R/3 Kernel 640_REL
Database Client Library OCI_920_SHARE
created in NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
created on Mar 10 2009 00:59:59
Support Level 0
Kernel Patch number 274
Source ID 0.274
DBSL Patch No. 220
ICU Version Library not loaded
Supported environment
SAP database version
 610
 620
 630
 640
Database
 ORACLE 9.2.0..
 ORACLE 10.1.0..
 ORACLE 10.2.0..
Operating system
 Windows NT 5.0
 Windows NT 5.1
 Windows NT 5.2
 Windows NT 6.0
Please fin the above details and help me out to upgrade the SAPM latest version.
Thanks
Mohan

Hello Gurus,
I have resolved the error Error 11 while initializing OS dependent part. after restarting the server.
But again when start the support packs at TP_INTERFACE_FAILURE stage I got the below errors.
STOP MOVE NAMETABS DEV 6 20100830162937 CAP_DDIC hmsidevqa01 20100830162622
ERROR: stopping on error 12 during MOVE NAMETABS.
Import phase 'IMPORT_PROPER' (01.09.2010, 12:58:38)
Error during executing the tp command 'tp IMPORT all DEV ...'
Transport control program tp could not be started
Interrupt the import due to an error situation (01.09.2010, 12:58:41)
Display detailed informations concerning the error in phase 'IMPORT_PROPER'
Abort the import due to an error situation (01.09.2010, 12:58:50)
Error in phase: IMPORT_PROPER
Reason for error: TP_INTERFACE_FAILURE
The below actions we had tried.
We have updated the TP and R3 Trans.
We have increased the virtual memory.
We have tried em/max_address = 72000000.( behavior is mentioned in note 540558)
Have checked transport control program: RSTPTEST
I have upgraded the kernal ,R3 trans and TP versions latest levels as well.
restarted the DB and SAP, again i have tried the same but still the problem is not resolved.Could you please help me out inthis problem ASAP.
Thanks
mohan

EPM Configurator Error "Failed to navigate from RegistryWizardState: Error while initializing registry.

Hi,
I am getting Below error in RHEL 6.5
EPM Configurator Error "Failed to navigate from RegistryWizardState: Error while initializing registry. See logs for more details" while configuring Essbase Server on 64 bit OS using Oracle Database
Any help...?

Hi ,
This community is to discuss Oracle Application Server specific issues, you can post this query in the below Hyperion Forms for better response:
Hyperion EPM
[OR]
Oracle Hyperion EPM (MOSC)
[OR]
Hyperion Certification for EPM (MOSC)
Regards,
Prakash.

EPM configuration ESSBASE Failed to navigate from RegistryWizardState:Error while initializing registry.

When I was in the configuration ESSBASE, ran into trouble.
Failed to navigate from RegistryWizardState:Error while initializing registry.
soft： EPM 11.1.2.3
OS： linux redhat6.1
Two planing server configuration
A server configuration essbase and install oracle relational database
Planning configuration is successful, but the first step in essbase Shared servers failed, the error is:Failed to navigate from RegistryWizardState:Error while initializing registry.
What should I do?
Please

If you are using Oracle database, Create a user(schema) with the below previliges
Roles:
DBA, Resource, Connect
privileges:
CREATE ANY SYNONYM,CREATE CLUSTER,CREATE INDEXTYPE,CREATE PROCEDURE,CREATE SEQUENCE,CREATE SESSION,CREATE TABLE,CREATE TRIGGER,CREATE TYPE,CREATE VIEW,DROP ANY SYNONYM
Thanks,
mady

While initializing delta

Similar Messages

Maybe you are looking for