While inserting in FCP 7 the sdi leave black in tape

Hi!
I am using FCP 7.0 with decklink HD extreme 3D card with decklink driver 7.7.3. The storage is XSAN Volume sharing in 8 edit suits.
When we go for mastering with print to tape in Digibeta cam with SDI the master print smooth. But when we go for Insert the video (while correction) the video goes black and the broadcast monitor also leave the video. Broadcast is connected with Y out.
As a solution we need to shut down the FCP and restart the application. after this it take the insert. this is happening in all the setup.
Another issue I find is that if we are inserting the audio the audio drop at out point.
Kindly help me out in this issue.
SUNIL

Hi Sunil,
I had exactly the same problem with a Decklink HD Extreme (not 3d) card!
It was on a machine of a client so I can't remember which version of OS, or driver, but I know for sure I had it on FCP 6 and 7.
But never took/had the time to contact Blackmagic about it.
Because I think that is what you need to do: [Contact Blackmagic|http://www.blackmagic-design.com/support/contact>
Rienk

Similar Messages

Some Kind of huge Noise coming from the Disc Drive while inserting and ejecting the disc.

Some Kind of huge Noise coming from the Disc Drive while inserting and ejecting the disc.
i have just purchased it before a couple of days a go.

I just installed a Mac Pro for a client. After a while I noticed this buzzing everyones talking about. It was especially bad after I installed two more internal drives. It seemed to come and go with HD activity. I pulled up the lever on the back of the machine when it was particularly loud and the buzzing went away. So like some others have noticed it's associated with the HD bays. I took the side off and adjusted the seating of the drives so they were exactly centered Now the buzzing is gone. I'll keep an eye on it. Maybe it will need some kind of silicone bumpers where the bay trays are metal to metal.
More research to come.
Richard

HT201263 My phone jammed while opening an app, the screen went black, and now wont turn on. I've tried forcing a restore with no luck, what do I do now?

My phone has been fine, then yesterday I tried to open an app, a phone call came through at the same time, and the screen went blank and now is unresponsive. I have tried holding the lock and home button, I have tried holding the home button while connecting to my laptop but sadly to no avail. What do I do now?

This was the third Restore I've attempted today.... 'm not sure what all I did including unplugging and plugging it back in, and messing with tryign to select my phone vs. my husbands but it starting moving again. It's now attempting to "back up" from ICloud... we'll see. Thanks

Access issues while inserting data in a table in same schema

Hi All.
I have a script that at first creates and then populates a table. My script used to run fine in production environment till few hours back. But all of a sudden, it is popping up error while inserting data into the table .
Error message - "Insufficient Previlages".
Please suggest me what may be the reasons for this kind of error.
Thanks in advance

Sonika wrote:
Hi All.
I have a script that at first creates and then populates a table. My script used to run fine in production environment till few hours back. But all of a sudden, it is popping up error while inserting data into the table .
Error message - "Insufficient Previlages".
Please suggest me what may be the reasons for this kind of error.
1) something changed
2) you are hitting a bug

Error while inserting data into a table.

Hi All,
I created a table.While inserting data into the table i am getting an error.Its telling "Create data Processing Function Module".Can any one help me regarding this?
Thanx in advance
anirudh

Hi Anirudh,
Seems there is already an entry in the Table with the same Primary Key.
INSERT Statement will give short dump if you try to insert data with same key.
Why dont you use MODIFY statement to achieve the same.
Reward points if this Helps.
Manish

Taking More Time while inserting into the table (With foriegn key)

Hi All,
I am facing problem while inserting the values into the master table.
The problem,
Table A -- User Master Table (Reg No, Name, etc)
Table B -- Transaction Table (Foreign key reference with Table A).
While inserting the data's in Table B, i need to insert the reg no also in table B which is mandatory. I followed the logic which is mentioned in the SRDemo.
While inserting we need to query the Table A first to have the values in TableABean.java.
final TableA tableA= (TableA )uow.executeQuery("findUser",TableA .class, regNo);
Then, we need to create the instance for TableB
TableB tableB= (TableB)uow.newInstance(TableB.class);
tableB.setID(bean.getID);
tableA.addTableB(tableB); --- this is for to insert the regNo of TableA in TableB.. This line is executing the query "select * from TableB where RegNo = <tableA.getRegNo>".
This query is taking too much time if values are more in the TableB for that particular registrationNo. Because of this its taking more time to insert into the TableB.
For Ex: TableA -- regNo : 101...having less entry in TableB means...inserting record is taking less than 1 sec
regNo : 102...having more entry in TableB means...inserting record is taking more than 2 sec
Time delay is there for different users when they enter transaction in TableB.
I need to avoid this since in future it will take more time...from 2 sec to 10 sec, if volume of data increases mean.
Please help me to resolve this issue...I am facing it now in production.
Thanks & Regards
VB

Hello,
Looks like you have a 1:M relationship from TableA to TableB, with a 1:1 back pointer from TableB to TableA. If triggering the 1:M relationship is causing you delays that you want to avoid there might be two quick ways I can see:
1) Don't map it. Leave the TableA->TableB 1:M unmapped, and instead just query for relationship when you do need it. This means you do not need to call tableA.addTableB(tableB), and instead only need to call tableB.setTableA(tableA), so that the TableB->TableA relation gets set. Might not be the best option, but it depends on your application's usage. It does allow you to potentially page the TableB results or add other query query performance options when you do need the data though.
2) You are currently using Lazy loading for the TableA->TableB relationship - if it is untriggered, don't bother calling tableA.addTableB(tableB), and instead only need to call tableB.setTableA(tableA). This of course requires using TopLink api to a) verify the collection is an IndirectCollection type, and b) that it is hasn't been triggered. If it has been triggered, you will still need to call tableA.addTableB(tableB), but it won't result in a query. Check out the oracle.toplink.indirection.IndirectContainer class and it's isInstantiated() method. This can cause problems though in highly concurrent environments, as other threads may have triggered the indirection before you commit your transaction, so that the A->B collection is not up to date - this might require refreshing the TableA if so.
Change tracking would probably be the best option to use here, and is described in the EclipseLink wiki:
http://wiki.eclipse.org/Introduction_to_EclipseLink_Transactions_(ELUG)#Attribute_Change_Tracking_Policy
Best Regards,
Chris

Why is the display going black when editing in FCP X?

Here's a tough one that the Genius Bar couldn't make heads or tails of:
I'm using FCP X to edit some videos, as I have for a few years now. Upon launching Final Cut Pro it loads my timelines etc as it always does, but sometime soon after (either while waiting for background tasks to run, or when click on an event) the screen goes black. I've replicated the same problem with multiple external drives, projects, etc.
And yes, I have uninstalled and reinstalled FCP X following the specific instructions on the Apple.com website. No such luck. Taking it to the Apple Store resulted in a lot of head scratching, confirmation that something is definitely wrong, and a then this Support Forum question.
Anybody heard of something as bizarre as this? I'm hoping so. Thanks.
My Gear:
MacBook Pro w Retina Display
OS X Mavericks 10.9.2
Final Cut Pro X 10.1.1
multiple external drives (Lacie, WD, etc)

What do you mean by saying the screen is going black?
Do you mean the whole monitor or just the Viewer in FCP X?
Try these general troubleshooting strategies even if you've already done them.
Use this free app to trash the preferences. This should be the first thing you try when any problems occur.
http://www.digitalrebellion.com/prefman/
2. Open Disk Utility and Repair Permissions.
3. Trash FCP X using this free app and reinstall it.
http://www.digitalrebellion.com/fcsremover/
If these 3 measures don't work, create a new User Account (Admin) in System Preferences and try running FCP X from that as it sometimes works miracles.

HT201263 None of these answers help my problem. My ipad will not leave the Apple logo. I hold both buttons and the screen goes black, then the apple logo immediately pops back up. I can't do anything because the apple logo just keeps popping back on.

I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore

RFC_ERROR_SYSTEM_FAILURE error while updating the sick leave in MSS

Hi Guru ,
We are getting RFC_ERROR_SYSTEM_FAILURE error while updating the Sick leave for team member from portal .
Please tell how to resolve this .
Dump part :
Runtime Errors         MESSAGE_TYPE_X
Error analysis
    Short text of error message:
    System error
    Long text of error message:
    Technical information about the message:
    Message class....... "HRTIM00BUFMSG"
    Number.............. 001
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Information on where terminated
    Termination occurred in the ABAP program "SAPLHRTIM00_TMWBUFFER" - in
     "INITIALIZE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 55
    of the (Include) program "LHRTIM00_TMWBUFFERCB5".

When an RFC fails from the portal to an SAP Backend, probably ECC 6.0 in your case, there are a few options that I use to troubleshoot:
      1. Ensure that all your jco's are set up ok, passwords, ect. JCOs do not appear to be the problem here
      2. Have an ABAP programmer review where the RFC is failing on the Backend System
      3. Set up an External Breakpoint in the backend RFC. Step to do this:
               a. Get the Backend UserID of a test portal user that is having this issue.
               b. Ensure that test user has "Debug Display" access in the Backend System
               c. Log into the Backend system, go to SE 37 and display your RFC
               d. Go to Utilities --> Settings --> Debugging in the top menu and add the Test User ID to the "Users" field.
               e. Set an external breakpoint any where you want in the RFC.
               f. Run the Leave request as the test user.
               g. a new SAP GUI screen will popup once it hits the breakpoint. The portal browser will stay frozen until you step thru the ABAP program.
Option 3 may sound like alot at first if you never used it, but if you are responsible for troubleshooting portal issues like this one, it is a skill you must have. You can also have an ABAP resource responsible for external debugging when you come accross issues like these. It helps you see exactly what data is being passed in from the portal and what is happening to cause the error.
Regards,
Tom

While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen.

While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen. It has plenty battery and I was wondering if it is an issue of using too much of the iPhones RAM or not. I have no other apps open besides Messages. I am getting kind of worried as it started around two weeks ago and it has gotten increasingly frequent.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the issue is resolved.

While in email today, the computer began flashing. I had to turn off with button. When I turned it back on, I got the apple icon and the moving loading wheel. It would turn for about 60 seconds and then stop. I turned off again. I now have a black screen.

while in email today, the computer began flashing. I had to turn off with button. When I turned it back on, I got the apple icon and the moving loading wheel. It would turn for about 60 seconds and then stop. I turned off again. I now have a black screen.

Hi wiesenruth,
If you are having issues starting up or booting your computer, you may find the following articles helpful:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Regards,
- Brenden

Avoiding duplicate records while inserting into the table

Hi
I tried the following insert statement , where i want to avoid the duplicate records while inserting itself
but giving me the errror like invalid identifier, though the column exists in the table
Please let me know Where i'm doing the mistake.
INSERT INTO t_map tm(sn_id,o_id,txt,typ,sn_time)
   SELECT 100,
          sk.obj_id,
          sk.key_txt,
          sk.obj_typ,
          sysdate,
          FROM S_KEY sk
    WHERE     sk.obj_typ = 'AY'
          AND SYSDATE BETWEEN sk.start_date AND sk.end_date
          AND sk.obj_id IN (100170,1001054)
           and   not exists (select 1
                                                               FROM t_map tm1 where tm1.O_ID=tm.o_id
                                                                    and tm1.sn_id=tm.sn_id
                                                                    and tm1.txt=tm.txt
                                                                    and tm1.typ=tm.typ
                                                                    and tm1.sn_time=tm.sn_time )

Then
you have to join the table with alias tml where is that ?do you want like this?
INSERT INTO t_map tm(sn_id,o_id,txt,typ,sn_time)
   SELECT 100,
          sk.obj_id,
          sk.key_txt,
          sk.obj_typ,
          sysdate,
          FROM S_KEY sk
    WHERE     sk.obj_typ = 'AY'
          AND SYSDATE BETWEEN sk.start_date AND sk.end_date
          AND sk.obj_id IN (100170,1001054)
           and   not exists (select 1
                                                               FROM t_map tm where sk.obj_ID=tm.o_id
                                                                    and 100=tm.sn_id
                                                                    and sk.key_txt=tm.txt
                                                                    and sk.obj_typ=tm.typ
                                                                    and sysdate=tm.sn_time )

HT4528 While I was trying out the voice over option on my phone I somehow put it in a mode to where the screen stays black and it will only talk to me. How do I get it back to normal?

While I was trying out the voice over option on my phone I somehow put it in a mode to where the screen stays black and it will only talk to me. How do I get it back to normal?

"If VoiceOver is on and the screen is black, but you can still use the device by pressing volume up and volume down, you may have screen curtain on. Try triple-tapping using three fingers on the device display to turn off screen curtain. Or connect the device to iTunes"
http://support.apple.com/kb/HT3577?viewlocale=en_US&locale=en_US

My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?

My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?

Reset the device by pressing and holding the home and power buttons for about 15-20 seconds.

My iPhone 5 is overheaded while charging and the screen is black and is not working. What should i do?

My iPhone 5 is overheaded while charging and the screen is black and is not working. What should i do?

Sounds like a battery failure. Your phone is under warranty. Bring it back to Apple

While inserting in FCP 7 the sdi leave black in tape

Similar Messages

Maybe you are looking for