While installing ODC ,pixscan.mdb file already exist Warning

Hi All..
I have installed ODC but by mistake I have started it without initializing the database and hence it throws the error that database is not initialized ..So I have uninstalled it and once again installed it...While installing it throws one warning that pixscan.mdb file already exist,if I select no and installation continues and completed also..And again while starting the ODC it throws the error -failed to query ecparameter table and database is not initialized..
I have also deleted the captovation directory from(HK_localuser) registry.i am also unable to find blackIce&captovation directory in HK_Local machine .
Please tell me where I am lagging..Any help is appreciated.
Thanks in advance.

If you having DB issues, you can simply remove the following out of the registry (note 64bit operating system, else it should be this same path minus the Wow portion i believe):
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Captovation\eCapture\Imaging Systems\eCapture
Removing this will then have ODC ask you to resetup your connections. Please make sure to reinitialize your DB (assuming this is a clean install), initialize DB should always be an enabled option. Make sure to chose the right one, oracle vs sql
As for installing the client, you shouldnt have to reinstall if all your looking to do is modify the DB parameters, just follow the above. If you do wish to reinstall, i suggest either a repair (then performing the above step),
if you wish to do a full remove, do it from Add/Remove. Once you've done so, as stated here many other times, remove the following folder \ProgramData\Oracle\DocumentCapture (again, ProgramData is a hidden folder, you can enable this by hitting 'alt' in a file explorer window, choosing tools..folderoptions..view..show hidden files and folders).

Similar Messages

Pop up saying File already exists when saving an excel file while running exe

I have an excel file which I read and write in my application.
When I run the application in development system, it works fine. However when I run the application as an exe and try to save the excel file, it says that 'The file already exists and Do you want to replace?'.
Why does this question asked for exe?
PFA my write excel VI
Thanks in advance.
Attachments:
Write to Excel.vi ‏25 KB

Hi Princess_swa,
The problem may be that when you build an exe, it adds another folder called 'builds' into the filepath.
A good way to fix this is to create a case structure, putting extra strip paths into your filepath if running an exe.
I have attached a screenshot of my code doing exactly this for you to look at. The code creates a 'base path' which is then used to reference all of my file paths in my code - and therefore, they will always have the right number of strip paths when it is run. (Note: in my code I have 2 extra strip paths, due to where I've placed the folder, but one should be sufficient.)
Also there is a 'Check if folder exists' VI which you can again link to a case structure, and change the filename if it already exists. Again, I have provided a screenshot of my code which does this.
Hope this helps,
Lou
Attachments:
runtime strip paths.png ‏9 KB
check folder exists.png ‏5 KB

PSE 9 and 5 will not import - says the file already exists in the catalog !

I've already wasted 2 days looking for answers to this. When someone buys this program, at least half of the price is paying for the database in the Organizer - yet even John Ellis himself, who seems to know more than anyone about it, has gone to Lightroom. This is bad coding!!!
Upgraded from 5 to 9. If you read my previous posts, this took 2 days too, and phone help from a tech, because it would not install in my XP computer. It did upgrade the Organizer from 5, although many of the symbols are unusable and don't work to help me identify my tags. However, now I see that neither 5 nor 9 is able to look at a file and display thumbnails that are in it.
I move files around a lot for my business. Any half-way good database should be able to find the missing files, and also add any new images. Say I have 10 images in file A, then add 2 more to make 12. It can't see the added images! Says can't import, the file already exists in the catalog.
I tried: updating thumbnails, recover, repair, in both 5 and 9 - nothing works. to import the images that I can SEE in these folders! I read here that it will not import files if the same name is somewhere else. That alone is a problem. But I think it's more than that: even if the file used to be in another folder, folder B, it won't recognize that it's in folder A now!
Since PSE9 uses sql db, shouldn't that be better than 5 and be able to do simple tasks like this?
Any advice or similar experiences eagerly welcomed.

Thank you for replying, dj paiqe.
Do you mean the first little section that says photos may not be displaying? Yes, those just reveal hidden photos and are very basic. I did them.
I guess we disagree about databases and what they are designed to do, or maybe I didn't explain this well.
I did not move the images outside of the catalog: I move them to various folders, all already imported WITHIN the catalog, as I send them to various editors. (these are all drawings, not photos, and I do this professionally, so it needs to work).
Folder A and Folder B and Folder C have already been imported into the catalog. So if I move 2 images from folder B into folder A, the Organizer is simply lost, says image already exists, and everything is totally screwed up, as the image is no longer in folder B, and it can't find it in folder A!!! The problem is, unless I memorize the image name, say Image 9, I can't tell it to reconnect, as there is no longer an image in front of me! So there are 2 images, without names, now nowhere to be found. Inefficient, to say the least.
I've never tried Lightroom or Filemaker, but I cannot believe that they would lose data like this. I think it's the Folder coding that's not working in PSE, and I wanted this to work so badly!!!!!
I am willing to do it the PSE way, since you now have captions, keywords, etc, and it is a very powerful database, when it works. I understand that one is supposed to move images within the Organizer, obviously. But now many images are disconnected. I could start all over importing, but is there any way to do that without losing tags and categories?

SharePoint Library - If I save file from Excel File Save As - then I always get "File already exists. Do you want to replace it?" - Upload works fine though.

Hi there,
In my SP 2010 document library - When I try to save an Excel file from File > Save As menu to the document library it always prompts me "File already exists. Do you want to replace it?" even though the file does not exist in that document library.
To the same document library - if I upload a file then it accepts it all fine.
Any clues why I cannot save files using File > Save As menu?
Thanks.

Hi,
As I understand, the notification pops up when you save an excel file to SharePoint library, while when directly upload file to library, there is no wrong.
Please confirm if the issue occurs to other machines.
Please open Microsoft Office Upload Center on the issue machine, then click settings, clear cache via checking Delete files from the Office Document Cache when they are closed.
http://office.microsoft.com/en-in/excel-help/office-document-cache-settings-HA010388664.aspx
If the issue occurs to client, I’d recommend you also ask the question in Excel forum:
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=excel
Regards,
Rebecca Tu
TechNet Community Support

"file already exists in the destination" during application build

I am trying to build an executable and have gotten the following error:
The file already exists in the destination.
C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\Sentech LV 82\Shared Library - Trigger SDK\StTrgApi.dll
WHen I start the build I go to "Build Executable" then click "Build"
The VI for the project I have open is the Startup VI and I do not list any Dynamic VIs or Support FIles.
I am using Labview 8.2
I installed a user library for a USB camera from Sentech wich I am using and it works fine in Labview 8.2
When I try to do the build I get the error shown above. The file it is referencing is there along with the .lvlib file.
I tried removing the file shown in the error message to see what would happen and I continue to get the same error even though the file is not there. I even restarted LV and still got the same error.
I am new to the application builder (v7 ?) and have not been able to find any good tutorials. Does anyone have any ideas on this error or a good place to learn more about app builder.
Thanks
Keith

I am new to the application builder (v7 ?) and have not been able to find any good tutorials. Does anyone have any ideas on this error or a good place to learn more about app builder.
Thanks
Keith
Hi Keith,
you can check this Link out for a tutorial on app builder.
Regards,
Denver

FTPEx: 550 : Cannot create a file when that file already exists.

Hi experts,
I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing Error message.
' Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '172.19.125.190:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
and this error message is not displayed for all the target files , some files are getting created succesfully.
After some times , the file in error status , gets created automatically.
What may be the reason.?
Thanks in advance .
Best Regards,
Anil

There seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
Check: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/69d7cfa4b633eae10000000a1553f6/content.htm
14. Select the File Construction Mode.
u25CB Create
The file is created. The document received last is saved in each case.
If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
You can only set the indicator if you select Use Temporary File under Put File below.
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 28, 2009 6:59 PM

Cannot rename DC, "Cannot create a file when that file already exists."

Hi,
A long time ago we used a domain controller named jacob.mydomain.lan. It was removed, possibly in a 'dirty' way, and now we cannot re-use that name for another domain controller. In the meantime we have upgraded to Win 2012 domain controllers
now, and when I enter this to rename:
netdom computername ourdc.mydomain.lan /add:jacob.mydomain.lan
I get the error: "Unable to add jacob.mydomain.lan as an alternate name for the computer. The error is: Cannot create a file when that file already exists."
If I enter:
netdom computername ourdc.mydomain.lan /remove:jacob.mydomain.lan
I get: "The command completed successfully", but it still refuses to add jacob.mydomain.lan
After each attempt to add a forward zone dns record 'jacob.ourdomain.lan' has been created. I always erase this manually afterwards.
What is the problem? How can I search to find the offending 'file' named 'jacob'?
Thanks a lot for help on this.
regards Tor

Kevin,
I suggest you wait 30 days instead of 3 days before you enthusiastically close threads. Some people might think you are being a jerk if you don't.
"K_evin Zhu" wrote in message
news:[email protected]...
Hi,
As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
unmark the answer as you wish.
BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Best Regards
Kevin
Tomás Mason

"file already exists"

Hi there!
Photoshop CS4 gives me a strange error. When trying to save a psd file as a jpg (using "save as"), it doesn't change the extension when selecting jpg from the format drop down menu. This results in a message, saying that the original file already exists, or when I save it to a different location, I get a psd file with jpg algoritm. Anyone any idea?
I'm using XP SP3. Other programs do not have this issue. For instance, when working in Adobe Acrobat, and trying to save a pdf in the rtf format, it correctly changes the file extension, and saves the file as rtf.
Thanks in advance!

TurboPriest wrote:
The problem must either lie with Photoshop, or a combination of Photoshop on my XP configuration.
Most probably, since I don't get that problem. Maybe try installing the 11.0.1 update (if you haven't yet). If that doesn't work, then try to figure out the extent of the issue. Try PS in a different Windows user account (create a new one), and turn off the unnecessary stuff that runs in the background on your computer. If you're not familiar with msconfig, then see this document for turning of background stuff:
http://go.adobe.com/kb/ts_kb404984_en-us
Let us know if either of these change the situation, and hopefully we can help you out from there.
Also, have you installed any plug-ins for PS? Maybe one of these is interfering with Photoshop's jpeg plug-in somehow. Check out this document:
http://go.adobe.com/kb/ts_kb409112_en-us
HTH

POL-3253 - Group file already exists

We have a daily process that converts MS Access 97 to Oracle using Migration Workbench. This has been working fine until we got the following error from the error.log file:
EXCEPTION :LoggingImpl._writeLog java.sql.SQLException: [POL-4202] can't update while select is active in read-committed mode
EXCEPTION : LoadTableData.run() : [POL-3253] group file already exists
Is there any site that I can look up this error message or can somebody please tell me what this meant? Thanks.
null

Thanks John. We downloaded the omwb13100 zip file.
Instead of using the default repository, I tried to log-in to a database on the local NT machine to recreate a new repository. Everything went fine afterwards.
We're all set for now but it would be nice to find out what happened to the default repository. Thank you.

Cannot create a file when that file already exists

When i try to use Photoshop filters: Adaptive Wide Angle, Shake Reduction and Liquify. An error pop up saying "Cannot create a file when that file already exists".
Just one detail: The liquify filter doen't pop up the error right away, the error occurs just after i press the "ok" button to accept the changes.
I have already tryed to Reset the preferences, tryed to reinstall the PS, Update the PS, download (and install) the latests drivers to my pc.
My Pc fit in all the requirements, have the openGL version: 3.0
I also have Photoshop CS5 installed, in which the liquify filter works perfectly.
Here i have two Print Screen, how it looks:
The first image is just right before a click the "Adaptive Wide Angle"
The second one is right after i clicked it
If you could help me, i already thank you for wasting you time reading this!

Resetting the Photoshop preferences does not reset the preferences for the plugins.
There should be a Plugins folder. If the folder cannot be created it would cause the error you are seeing.
Can you check the permissions on the ‘Adobe’ folder at: C:\Users\jworthin\AppData\Roaming\Adobe.
Can you manually create a Plugins folder in that location or do you get an error?

Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

Hi There,
All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
Some of the specified files already exist in the target location. The files marked below will be replaced:
filename.eps
filename-01.eps
We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
All machines are new Quad-core MacPros running:
- Leopard 10.5.8
- Illustrator CS4 14.0.0
We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
Is anyone else experiencing this behavior?
Any help or pointers in the right direction would be much appreciated.
Cheers
Ben

Thanks for the reply.
The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
Why do we still use eps?
Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
Cheers, and thanks for the help.

Share: File already exists. It doesn't: Won't Replace

FCPX 10.0.9 OSX 10.7.5
Never had any trouble exporting before.
Share---- Export File----- (select location as the 1tb HD)- fcpx says file already exists, do you want to replace? Hit Replace, and it just cycles the same error, until cancelled.
Does this on every single fcpx project, even those that worked fine before.
Share--- E-mail ----- fcpx immediatley throws a quicktime -50 error.
Share ------ Export File (select loction as the desktop or any other folder) ---- fcpx give the quicktime -50 error.
I don't think I've changed anything.
All saving works fine on all other programs that I use.
I am trying to save to the internal drive in my macbook pro
disk utilty says the drive is fine.
You got me....?

I did that and got rid of some of the early frame errors. i was able to export a section of clips, but then it would never export past frame 7065 no matter what clip was holding that place (at least that is what I think). Even then it only worked with master file exports.
I was wrong about this. Don't use it if you are troubleshooting your problem with this thread.
What was happening is that there was a black frame at the end of the clips that were throwing errors. I had to check the errors on that frame. I don't konw if they are dead frames or simply black frames, but all of them had those bad frames in the original clips themselves (and as a result in the timeline if I had inserted the WHOLE clip, or at least any subclip including that last bad frame). The only position they were was at the end of the clip.
The solution was to find the offending frame in the timeline and then cut it out. IN my case there were 5 of them.
Note: that the title does not reflect the problem. That problem was that it didn't like where I was saving (not specificing a directory, not sure why it was allowing me to choose the destination as my HD, and gave a less than helpful error on that).

Cannot create a file when that file already exists, but should overwrite

Hi,
I need the same file name which is at Sender side and when it reaches to Receiver directory without timestamp.
for eg., Sender side : Yeswanth.txt
and also receiver side : Yeswanth.txt
but, here it should overwrite the existing file (because, the sender side file name is always constant) at receiver directory when the job schedules for each time.
Processing parameters i has given on Receiver side:
File Construction Mode : Create
put file : Use Temporary File
and I enabled the Adapter Specific Message Attributes at Sender side and Receiver side.
Error getting receiver side at communication channel :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
Yeswanth.txt: Cannot create a file when that file already exists.
Reward points for useful answers.
Regards,
Yeswanth.
Edited by: YeswanthRaj Kumar on May 23, 2008 8:20 AM

Hi Yeswanth
Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
Will this be fine.
Regards
Ashmi

Database Adapter Configuration Wizard "File already exists" error

I'm uding JDeveloper 10.1.3.1 on an XP machine running Java 1.5.0_06 and having trouble editing SOAOrderBooking.bpel as part of the tutorial.
The tutorial calls for me to drag a new Database Adapter onto the diagram, select the "soademo_ssn" database and, on page 3 of the wizard select "Perform an operation on a table" and have only "Select" checked.
When I click "Perform an operation on a table", the 5 tickboxes enable and are checked but the mouse pointer remains as an hourglass. If I press "Next" without doing anything else, the Wizard title changes to "Select Table" but never draws its controls, aside from the "Back" etc buttons along the bottom and the decorative graphic to the left. If I do try unchecking boxes to have only "Select" selected, every check box state change generates the error "File already exists" and the path of the .mwp file whose name I specified earlier. The file does exist, but it didn't before I entered the wizard.
I've tried with three different filenames, and with two different database connections- both of which check out fine when I do "Test connection" in their property pages from the Connection Navigator.
If I delete the file after each check state change, I can stop the errors appearing after I untick each checkbox, but the wizard still hangs on pressing "Next" whether the file is there or not.
Does anyone have any suggestions?

I am facing the same issues.
I want to pick the new files and retain the files after polling.
Any idea on this would help me to solve this issue.
Thanks in advance.

How to check if the file already exists in the client directory

Hi all.
I'm on devsuite 10g. I'm using webutil to download files from DB using webutil function db_to_client.
What I need is to check if the file already exists in the client directory and if yes to display a message to ask the user if he wants to overwrite or no. How can I make this???
Here is the code that I'm using to download the file.
Thanks all for the collaboration.
Fabrizio
declare
file_path varchar2(2000) := null;
BEGIN
/** I ask where saving the file on the client machine **/
file_path:= webutil_file.file_selection_dialog
(directory_name => null,
file_name => :bin_docs.name,
file_filter => '',
title => 'Saving file',
dialog_type => save_file, --save_file
select_file => TRUE);
/** I download the file from DB to client **/
if webutil_file_transfer.DB_To_Client_With_Progress
( file_path ,
'BIN_DOCS',
'DOC' ,
'doc_id = '||:bin_docs.doc_id,
'Downloading file',
' '||:bin_docs.name) then
msg_alert('Download del file avvenuto con successo','I',false);
else
msg_alert('Si è verificato il seguente errore in fase di download '||SQLERRM,'I',false);
end if;
end;

How about something like the below:
Note: I have a yes/no alert to asking if they want to over-write the existing file.
DECLARE
file_path VARCHAR2(2000) := null;
over_write BOOLEAN := TRUE;
BEGIN
/** I ask where saving the file on the client machine **/
file_path:= webutil_file.file_selection_dialog
(directory_name => null,
file_name => :bin_docs.name,
file_filter => '',
title => 'Saving file',
dialog_type => save_file, --save_file
select_file => TRUE);
IF webutil.file_exists(file_path) THEN
/** check a file by the same name exists in the selected directory **/
IF show_alert('Ask_overright') != alert_button1 THEN
/** If we say no then set over_write value to false **/
over_write := FALSE;
END IF;
END IF;
IF over_write THEN
/** I download the file from DB to client **/
IF webutil_file_transfer.DB_To_Client_With_Progress
( file_path ,
'BIN_DOCS',
'DOC' ,
'doc_id = '||:bin_docs.doc_id,
'Downloading file',
' '||:bin_docs.name) then
msg_alert('Download del file avvenuto con successo','I',false);
ELSE
msg_alert('Si è verificato il seguente errore in fase di'
||' download '||SQLERRM,'I',false);
END IF
END IF;
END;
cheers
Q

While installing ODC ,pixscan.mdb file already exist Warning

Similar Messages

Maybe you are looking for