While installing the CS6 Apps through CC Subscription, what should I do with my old CS4 App

While installing the CS6 Apps through Creative Cloud Subscription, what should I do with my old CS4 Apps still in my Apps folder?
After installing my first 2, Ai and ID, I check the Application Folder and both the newly installed CS6 and my old CS4 versions of each App are in the folder.
Do I just throw away into the trash the CS4 versions? If so, will all my created data files remain intact?
Someone please respond and help, rather than just viewing this, as the many views listed show. Thanks!

Uninstall the CS4 versions properly using the uninstallers that come with them (aliases are in each of the apps' directories). Beyond that it works as it should - newer versions always leave older ones in place. Whether or not you will be able to open all your CS4 files in CS6 we cannot know - yes, newer versions should open older files, but you may be using specific stuff that limits compatibility like certain plug-ins that would need to be upgraded for CS6 as well. For that exact reason you may wanna keep CS4 around a while longer until you can be sure...
Mylenium

Similar Messages

Photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work

hi guys,
My photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work?
My OS is windows 7
RAM - 8gb
HDD - 1 TB

are you getting any errors?
and secondly and I know this from experience, ( but on 32 bit ) is it loaded already as in sat in task manager, but not actually get at able, killing the processes cures it or a reboot of course

What do I do with my old CS4 when downloading the new versions from the cloud?

What do I do with my old CS4 when downloading the new versions from the cloud?
Do I just uninstall via the control panel on my computer?

if you no longer need cs4, deactivate it (help>deactivate) and uninstall it.
otherwise, leave it installed along with cc. you can use both if you need.

HT1923 I cannot print a jewel case insert playlist since installing the newest i-Tunes version. What should I do?

Since installing the newest i-tunes version, I cannot print a jewel case insert. The titles of the songs are jumbled into two or three lines.
Can this be fixed?

You might like to look here!!
https://discussions.apple.com/message/20592308#20592308

Error occurred while installing the updates (iTunes)

Error occurred while installing the updates (iTunes)
Applies To: Windows | Windows XP | Programs
I am running Windows XP and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

Look into what security software you are running and disable it and also go to apple.com/support and search for
itunes store connection issues by actually typing that into the bar next to support then scroll down to one of the TS articles and begin a jounrey of internet explorer configuration.
I have done the looking for you all:
http://support.apple.com/kb/TS1379
http://support.apple.com/kb/HT1527
http://support.apple.com/kb/TS1368
Here also is a video to help you first completely uninstall itunes you do not lose any of your music by removing itunes your music and apps and data are stored in your documents folder just uninstall iTunes.
http://youtu.be/3c90vXO8K5w

Error 1603 While installing the MBAM server 2.0 SP1

Hi,
I am getting some error while installing the MBAM 2.0 SP1 server. I gone through the Logs below the logs.
what is solution for this issue. I have installed recovery, Audit and Reporting MBAM DB on other server and while trying to install Self service portal and Administration & Monitoring Server am getting below error.
Can any one help me.
roperty(S): LogonUser = BOMSVCBTK
Property(S): UserSID = S-1-5-21-462901161-2028365903-2773613984-13552
Property(S): UserLanguageID = 1033
Property(S): ComputerName = BOMVMSSIPS01
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 11:57:33
Property(S): Date = 4/1/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.17929
Property(S): MsiWin32AssemblySupport = 6.2.9200.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): DATABASE = C:\Windows\Installer\73650.msi
Property(S): OriginalDatabase = C:\Users\BOMSVC~1\AppData\Local\Temp\MBAMServer.2.1.0117.0.msi
Property(S): UILevel = 5
Property(S): Preselected = 1
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): CurrentUser = KALPATARUGROUP\S-1-5-21-462901161-2028365903-2773613984-13552
Property(S): SOURCEDIR = C:\Users\BOMSVC~1\AppData\Local\Temp\
Property(S): SourcedirProduct = {D81934D7-20FC-46A9-9F2D-009961EAAA33}
Property(S): CompRepURLFolder = Microsoft+BitLocker+Administration+and+Monitoring
Property(S): ProductToBeRegistered = 1
MSI (s) (64:6C) [11:57:33:423]: MainEngineThread is returning 1603
MSI (s) (64:C8) [11:57:33:423]: RESTART MANAGER: Session closed.
MSI (s) (64:C8) [11:57:33:423]: No System Restore sequence number for this installation.
MSI (s) (64:C8) [11:57:33:439]: User policy value 'DisableRollback' is 0
MSI (s) (64:C8) [11:57:33:439]: Machine policy value 'DisableRollback' is 0
MSI (s) (64:C8) [11:57:33:439]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (64:C8) [11:57:33:439]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (64:C8) [11:57:33:439]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (64:C8) [11:57:33:439]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (64:C8) [11:57:33:454]: Destroying RemoteAPI object.
MSI (s) (64:B4) [11:57:33:454]: Custom Action Manager thread ending.
MSI (c) (C4:BC) [11:57:33:454]: Back from server. Return value: 1603
MSI (c) (C4:BC) [11:57:33:454]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C4:BC) [11:57:33:454]: PROPERTY CHANGE: Deleting SECONDSEQUENCE property. Its current value is '1'.
Action ended 11:57:33: ExecuteAction. Return value 3.
MSI (c) (C4:BC) [11:57:33:454]: Doing action: FatalError
Action 11:57:33: FatalError.
Action start 11:57:33: FatalError.
VM-
Shailendra Dev

Is the user a member of local administrator group on MBAM web server.
Can you share the complete log files publicly on Google drive or share drive or drop box?
What exact steps you are doing for the installation. Have you completed all of the pre-requisites?
Gaurav Ranjan

ITunes 10.1.2 error message "Errors occurred while installing the updates"

Getting a blank page on the iTunes store, I was told that updating to 10.1.2 should fix that. Currently running iTunes 9.1.1.12. While downloading the updates, I get the following message:
"Errors occurred while installing the updates. If the problem persists, choose Tools>Download Only and try installing it manually."
I have tried installing the update both ways (through the update utility and manually) several times and I keep getting this error. It's very frustrating. Any suggestions?
Thanks
Chris
Message was edited by: cevers

Finally got a response from Apple. They suggested I uninstall Itunes, then download and install the latest version. Worked great and I was able to recover all of my purchases.

Fb 4.7 air sdk 15.0.0.349 Error occurred while installing the application

Hi
Im using fb 4.7 air sdk 15.0.0.349 with Macosx 10.9.4, xcode 6.1 (ios simulator 8.1) and i keep getting the following response when debugging with ios simulator:
Error occurred while installing the application:
Session did end with error (null)
Can you help? Is this a bug being fixed yet?
Thanks.
zed0784

Sorry i was refering to my other post. I am on FB 4.7, AIR 15 SDK 15.0.0.356, Xcode Version 6.1 (6A1052d) with the same problem on Mavericks on my MacPro and Yosemite on my MacBook Pro. My App (which uses Feathers and Starling) didnt work at all and even got rejected for Testflight testing because is was crashing immediately on iOS 8.1. I found out that this was related to the new compiler so "-useLegacyAOT yes " solved that problem.
But the problem that i cannot test in iOS simulator at all still persists. (Session did end with error (null))

TS1702 i am having error of (0xE8008001) while installing the software on my iphone please help me out ...

i am having a problem while installing the apps on my iphone 3gs it shows the error on the 4th step while installing and the error no is 0xE8008001

http://bit.ly/16K6hC2

Dear I need to upgrade my Mac Bookpro from 10.4.11 to the latest software is there is any solutions in order to buy install the software online through itunes or so

Dear I need to upgrade my Mac Bookpro from 10.4.11 to the latest software is there is any solutions in order to buy install the software online through itunes or so

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Application Manager gives back error (EX11) while installing InDesign CS6 (error while extracting in

Hello, I need help regarding the Application Manager
Application Manager gives back the error (EX11) while installing InDesign CS6 (error while extracting in temporary folders).
I don´t have problems installing PS, Acrobat etc.
Any idea?
Thanks

I would have never figured that out myself. Thank you so much! On behalf on my dad a big thanks as well, because he is going to use Adobe InDesign CC (2014).
Here, a local, standard user account worked for me. However, the password of an Administrator account was required once.
Here, any username longer than 13 created that error code, for example I tried "AInDesignCC14" unsuccessfully. Usernames with 12 or less characters worked, for example "InDesignCC14" worked.
Just renaming an existing account did not work, because the personal folders did not change in name. Therefore, I was forced to create a new account.
Windows 7 Ultimate (32bit, German), Apple Boot Camp; a vanilla installation

Error while installing the NerWeaver Platform

Error While installing the NetWeaver Instance
Posted: Nov 22, 2004 2:37 PM Reply E-mail this post
When I am installing 'SAP NetWeaver Suite'the below error came, can someone help me out on this below error?
MOS-01011 'C:\usr\sap\BWI\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
The J2EE server is up unrunning @ the installing the Netweaver ABAP Instance I got this error.
For the user BWI it has the Administrator previlages i checked so many time but I am unable to get it.
Please help me out the error.

Hi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek

How to create new folders while installing the VI in some other PC

Hi,
I want to create a folder while installing the VI to some other maching using installer/setup.exe and also i want to copy some excel file to the c: drive of installing PC while installing is their anyway to do this. Please help me in this regards
Regards
Shivakumar Singh

Hi
If you are installing vi from CD, then you might use the first approach with application builder.
If you just want to use any CD, than I think you should consider some interactive script with the user.
You can easily creat one with the windows commands, by means of *.cmd files. You can read about it by typing "help cmd" and/or "help" in the RUN in Windows. Then I propose to search the web for some examples on how to write the cmd scripts. If you know TCL there will be no problem for you.
You can also try to ask some dudes on the WinNT newsgroup. They will write it in no time.
Unfortunatelly I have now no time to write the script for you.
good luck
Pawel

While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator

While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message. I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly." I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!

Solving MSVCR80 issue and Windows iTunes install issues.

SQL version could not be verified error while installing the SCOM 2012 R2 reporting component

I have the below SCOM server roles in my SCOM 2012 R2 set up
1) All servers with Windows Server 2008 R2 SP1, MS - SCOM1, DB & DW - DB1, Reporting Server - DB2
2) All the DB servers with SQL 2012 SP1
3) Windows firewall is turned off on all the servers.
4) Success fully installed all the components except SCOM reporting.
While installing the SCOM 2012 R2 reporting component on DB2 ( Iam running this set up on the server where I instllaed the SQL DB engine and reportin services in Native mode. Configured the SQL reporting database and reporting URLs successfully in SQL reporting
configuration manager) getting the below error in the Rporting server instance page. Kindly advise.
I ran mofcomp.exe and there is no firewall restrictions. My account also has DB owner & sysadmin permissions.
Also tried re installing the SQL on Reporting server.
"The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information".

Hi,
As far as I know, after installing SSRS, we don't need to configure the database and reporting URLs manully. When we install the reporting service for SCOM, it will configure those automatically.
If possible, you may re-install SSRS and then install SCOM reporting service.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

While installing the CS6 Apps through CC Subscription, what should I do with my old CS4 App

Similar Messages

Maybe you are looking for