While itunes was restoring my ipad in recovery mode, I got an error message requesing a passcode.  What do I do now?

While itunes was restoring my ipad in recovery mode, I got an error message requesing a passcode.  What do I do now?

Hi Amandalee498,
It sounds as if your Windows computer is not detecting the iPad in iTunes. Let's see if we can get that fixed up.
I would suggest that you troubleshoot using the steps in this article - 
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thanks for using Apple Support Communities.
Best,
Brett L 

Similar Messages

  • "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes."

    Went on a Vegas trip on Sept
    11th.  My iPad worked fine
    before getting on the plane. In the hotel about 48hrs later I opened my iPad it
    read the message: “iPad is disabled,
    connect to iTunes.”
    To my knowledge myself, nor anyone else has tried to access my device or
    entered the password incorrectly 3 or more times.
    I started by updating my iTunes account on my computer to the latest version.
    Then multiple times I attempted
    the “Use recovery mode”
    steps.
    e.g.
    1. Turn off your device and leave it off.
    2. Plug in your device's USB cable to a computer with iTunes.
    3. Hold down the Home button on your device as you connect the USB
    cable. Keep holding down the Home button until you see the Connect to iTunes
    screen.
    I received the message on my computer saying “iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes.”
    I click the “Restore iPad” button.
    During which time the progress bar on my computer’s iTunes
    screen was moving very slowly and other times seemed like it wasn’t moving at
    all. I would leave my two devices and attached by the cable and upon returning
    I would find that the process would have ended before it had completed.
    Initially I thought it was a connections issue because I was in remote
    locations with slow internet servers. Since being home I have re-attempted the
    process and have been able to fully complete the forced recovery but I will
    receive a message saying:
    “The iPad could not be restored. The disk you are attempting to use is full.
    Removing files and emptying the recycle bin will free up additional space.”
    What recycle bin is the message referring to? Obviously I CANNOT access any
    data on the iPad itself. Just for the **** of it, I did empty my computers
    recycle bin and re-attempted the forced recovery process but as I suspected it
    did nothing for the iPad and I still received the same message: “The iPad
    could not be restored. The disk you are attempting to …”
    Please help

    Here's a couple of Apple Support articles ...
    Resolve iOS update and restore errors
    If you can't update or restore your iPhone, iPad, or iPod touch

  • HT201210 on my iPad I get an image of the USB connection and an arrow pointing to the itunes icon for a few seconds then it switches off.  connected  to itunes via USB get a message that itunes has detected an ipad in recovery mode must restore when i do

    When I havent got my ipad connected to a power supply I get an image on my ipad of the usb cable with an arrow pointing to a itunes icon and no matter what you try and do iyt stays on that for a few seconds and then switches off the ipad, connecting it through usb into itunes on my PC (XP) this image says on the screen but I get a message on itunes saying itunes has detected an ipad in recovery mode and mneeds to be restored - when I fire off the restore through itunes after a few minutes it comes back and says it cannot restore and give an error message 1603.  I have also repeated the process through my wife's laptop (Vista) and get the same situation -it is an 32GB Ipad 3 purchased last November -  any ideas ?

    Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • HT4623 iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes

    I downloaded the update because why not. I then turned my iPad on and get the iTunes logo and a lightning cable picture. I plugged the ipad into my computer and opened iTunes.
    The I got:
    "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes"
    When I click restore it then says:
    "Are you sure you want to restore the iPad "iPad" to its factory settings? All your media and other data will be erased, and the newest version of the iPad software will be installed.
    iTunes will verify the resotre with Apple. After this process is complete, you will have the option to restore your contacts, calendars, messages and other settings."
    I don't want to lose my media. I was never told to make a back up, I was never told the update would be this difficult.
    Can I just revert back to how it was before?

    I downloaded the update because why not. I then turned my iPad on and get the iTunes logo and a lightning cable picture. I plugged the ipad into my computer and opened iTunes.
    Then I got:
    "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes"
    When I click restore it then says:
    "Are you sure you want to restore the iPad "iPad" to its factory settings? All your media and other data will be erased, and the newest version of the iPad software will be installed.
    iTunes will verify the resore with Apple. After this process is complete, you will have the option to restore your contacts, calendars, messages and other settings."
    I thought okay, I'll just erase everything then. I get error 3004 when I try to restore.
    I've tried disabling my security software, updating iTunes, replacing my hosts file and using a third party software recovery tool. Nothing works. I never thought Apple would break my iPad with an update but they managed to.
    Any solutions?
    Thank you.

  • I got this message on itunes. itunes has detected an ipad in recovery mode you must restore this ipad before it can be used with itunes

    I was updating my Ipads software when it just shut off. I turned on the i pad and it gave me this picture of the wire plugging in to itunes. i plugged it into i tunes and  i got this message on itunes saying itunes has detected an ipad in recovery mode. you must restore this i pad before it can be used with i tunes. pleasssse help

    iOS Recovery Mode -
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808

  • What does this message mean?  "ITunes has fetected an iPad in recovery mode.  You must restore this iPad before it can be used with ITunes".

    What does this message mean?  "itunes has detected an iPad in recovery mode.  You must restore this iPad before it can be used with ITnes."  How do I restore when every time I connect to my computer I get this message?

    Perhaps the information in this Apple support article will help:
    http://support.apple.com/kb/TS3694#error3004
    Regards.

  • Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

    Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

    If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem.  Also, since you have IOS-7, read this.  It might help.

  • HT201412 I try to update IOS 6 to my ipad 2 and after half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can every

    I try to update IOS 6 to my ipad 2/ wf/3g  and after about half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can everyone help please. In the screen of iPad appears the itunes Logo and the cable of connectios. Can't do nothing!!!

    Click restore in itunes.

  • TS3274 Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.

    Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.  It downloaded some images prior to this message and we selected skip any files with errors.
    Ipad now just showing apple image with power cord.  Don't want to click restore and lose all data.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • In attempting to reset my ipad2thru itunes it states restore .iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. when i hit restore it does  not reset

    in attempting to reset my ipad2 thru itunes it states .iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. when i hit restore it does  not reset

    Step by step
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. iPad Recovery Mode on computer screen
    8. Select "Restore iPad"...
    9. Select "Restore and Update"
    10. Extracting Software.
    11. Preparing iPad for restore.
    12. Waiting for iPad.
    13. Verifying iPad restore...
    14.Restoring iPad software.
    15. Verifying iPad software.
    16. Verifying iPad Restore...
    17. Restoring iPad firmware...
    18. Your iPad is restored to factory settings; keep iPad connected to computer
    19. Activate iPad
    20. Enter Apple ID and Password
    21. Continue
    22. Welcome to Your New iPad

  • HT201210 Why can I not restore my iPad form recovery mode

    Why I am I not able to reach the servers to restore my iPad from recovery mode.

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Message rcvd: iTunes has detected an iPad in recovery mode.

    I plugged my iPad into an electrical outlet to charge it. It asked if I wanted to update. I replied yes. Now all that shows up on the screen is the image of the end of a charge cord that plugs into the iPad and an iTunes icon. Thinking that meant I should plug into the computer, I did so and got the message: iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. I have done the restore, but want to know why this occured.

    There's no possible way anyone here could determine why this has happened to your own device as there could be one of of many possibilities.
    Electronic devices and computers some times fail

  • Can not update ios7 itunes has detected an ipad in recovery mode. why is this happening

    can not update ios7, itunes has detected ad ipad in recovery mode. why is this happening, it appears that apples answer to everyhing is to perfrom a factory reset...

    Please see: http://support.apple.com/kb/HT1808 for assistance with this issue.
    Regards,
    Steve

  • HT201210 I was just trying to restore my iPhone3G from recovery mode, but always received error code 1015. What shell I do to avoid this code?

    I was just trying to restore my iPhone3G from recovery mode, but always received error code 1015. What shell I do to avoid this code?

    Your phone is probably jailbroke

  • TS3694 i was trying to back up my iPhone and got an error message and now i can't even access my phone.  on my screen there is an itunes icon with an arrow and a picture of a cord beneath it.  I can't use my phone or access anything on the phone.

    I was trying to back up my phone and got an error message and cannot use my phone at all... There is a picture of an itunes icon and a cord.  I cannot get to my phone or any settings or icons.... HELP. I'm not sure of my operating system or which iphone 4 it is....

    Open current iTunes on your computer. Connect iPhone to the computer with USB Cable. Follow directions or click the Restore button of iTunes.

Maybe you are looking for

  • Bypassing Constructors....

    Hi there, Does anyone know how to create a new instance without causing invocation of a constructor? Its driving me mad - I know I've got it in one of my reference books (Java XML I think, where they create custom XML serialization streams) - but I c

  • Is osx mountain lion compatible with mac pro (4,1) w/ raid card?

    I noticed Apple isn't selling the Mac Pro's with raid cards anymore, so it makes me wonder of Mountain Lion is compatible with my Mac Pro which uses the apple mac pro raid card.  Anyone know??

  • Valueset where clause

    Hi All, I have two valuesets Valueset1 & Valueset2, Both are independent valuesets and both has set of values. here valuset2 has been attached to one KFF structure's segment. (Valueset1 & Valueset2 will have same set of values). I want to restrict th

  • Doubt on Landed Cost

    Hi all, I came across a report named Landed Cost in one of my client instance in inventory module.Is this a standard report? If so,why don't i find it in other instances? Any help is appreciated, Thanks in advance!!

  • Currencies Formating and Validations

    hi All, I'm using ADF BC, JDev11g, Window XP, IE7. My use case: I'm having a table which has details in first facet, in the second facet there is a form which displays the contents of selected row in a form. In this form there are few fields like Cur